You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1756 lines
65 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Set curl options as needed for CMake build
set(BUILD_CURL_EXE OFF CACHE INTERNAL "No curl exe")
set(BUILD_DASHBOARD_REPORTS OFF CACHE INTERNAL "No curl dashboard reports")
set(BUILD_RELEASE_DEBUG_DIRS OFF CACHE INTERNAL "No curl release/debug dirs")
set(BUILD_SHARED_LIBS OFF CACHE INTERNAL "Build shared libraries")
set(CMAKE_USE_GSSAPI OFF CACHE INTERNAL "Disable curl gssapi")
set(CMAKE_USE_LIBSSH2 OFF CACHE INTERNAL "Disable curl libssh2")
set(CMAKE_USE_LIBSSH OFF)
set(CMAKE_USE_OPENLDAP OFF CACHE INTERNAL "No curl OpenLDAP")
set(CURL_BROTLI OFF)
set(CURL_DISABLE_ALTSVC ON)
set(CURL_DISABLE_COOKIES OFF CACHE INTERNAL "Do not disable curl cookie support")
set(CURL_DISABLE_CRYPTO_AUTH OFF CACHE INTERNAL "Do not disable curl crypto auth")
set(CURL_DISABLE_DICT ON CACHE INTERNAL "Disable curl dict protocol?")
set(CURL_DISABLE_DOH OFF)
set(CURL_DISABLE_FILE OFF CACHE INTERNAL "Disable curl file protocol?")
set(CURL_DISABLE_FTP OFF CACHE INTERNAL "Disable curl ftp protocol?")
set(CURL_DISABLE_GETOPTIONS OFF)
set(CURL_DISABLE_GOPHER ON CACHE INTERNAL "Disable curl gopher protocol?")
set(CURL_DISABLE_HSTS ON)
set(CURL_DISABLE_HTTP_AUTH OFF)
set(CURL_DISABLE_HTTP OFF CACHE INTERNAL "Disable curl http protocol?")
set(CURL_DISABLE_IMAP ON CACHE INTERNAL "Disable curl imap protocol?")
set(CURL_DISABLE_LDAP ON CACHE INTERNAL "Disable curl ldap protocol?")
set(CURL_DISABLE_LDAPS ON CACHE INTERNAL "Disable curl ldaps protocol?")
set(CURL_DISABLE_LIBCURL_OPTION OFF)
set(CURL_DISABLE_MIME OFF)
set(CURL_DISABLE_MQTT ON)
set(CURL_DISABLE_NETRC OFF)
set(CURL_DISABLE_NTLM OFF)
set(CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG OFF)
set(CURL_DISABLE_PARSEDATE OFF)
set(CURL_DISABLE_POP3 ON CACHE INTERNAL "Disable curl pop3 protocol?")
set(CURL_DISABLE_PROGRESS_METER OFF)
set(CURL_DISABLE_PROXY OFF CACHE INTERNAL "Do not disable curl proxy")
set(CURL_DISABLE_RTSP ON CACHE INTERNAL "Disable curl rtsp protocol?")
set(CURL_DISABLE_SHUFFLE_DNS OFF)
set(CURL_DISABLE_SMB OFF)
set(CURL_DISABLE_SMTP ON CACHE INTERNAL "Disable curl smtp protocol?")
set(CURL_DISABLE_SOCKETPAIR OFF)
set(CURL_DISABLE_TELNET ON CACHE INTERNAL "Disable curl telnet protocol?")
set(CURL_DISABLE_TFTP ON CACHE INTERNAL "Disable curl tftp protocol?")
set(CURL_DISABLE_VERBOSE_STRINGS OFF CACHE INTERNAL "Do not disable curl verbosity")
set(CURL_ENABLE_EXPORT_TARGET OFF)
set(CURL_HIDDEN_SYMBOLS OFF CACHE INTERNAL "No curl hidden symbols")
set(CURL_LTO OFF CACHE INTERNAL "Turn on compiler Link Time Optimizations")
set(CURL_STATIC_CRT OFF CACHE INTERNAL "Set to ON to build libcurl with static CRT on Windows (/MT).")
set(CURL_WERROR OFF CACHE INTERNAL "Turn compiler warnings into errors")
set(CURL_ZSTD OFF)
set(DISABLED_THREADSAFE OFF CACHE INTERNAL "Curl can use thread-safe functions")
set(ENABLE_ARES OFF CACHE INTERNAL "No curl c-ares support")
set(ENABLE_ALT_SVC OFF)
set(ENABLE_CURLDEBUG OFF CACHE INTERNAL "No curl TrackMemory features")
set(ENABLE_DEBUG OFF CACHE INTERNAL "No curl debug features")
set(ENABLE_INET_PTON OFF CACHE INTERNAL "Set to OFF to prevent usage of inet_pton when building against modern SDKs while still requiring compatibility with older Windows versions, such as Windows XP, Windows Server 2003 etc.")
set(ENABLE_IPV6 ON CACHE INTERNAL "Enable curl IPv6 support detection")
set(ENABLE_MANUAL OFF CACHE INTERNAL "No curl built-in manual")
set(ENABLE_THREADED_RESOLVER OFF CACHE INTERNAL "No curl POSIX threaded DNS lookup")
set(ENABLE_UNICODE OFF)
set(ENABLE_UNIX_SOCKETS OFF CACHE INTERNAL "No curl Unix domain sockets support")
set(HTTP_ONLY OFF CACHE INTERNAL "Curl is not http-only")
set(PICKY_COMPILER OFF CACHE INTERNAL "Enable picky compiler options")
set(USE_LIBIDN2 ON)
set(USE_NGHTTP2 ON)
set(USE_NGTCP2 OFF)
set(USE_QUICHE OFF)
set(USE_WIN32_IDN OFF)
set(USE_WIN32_LDAP OFF CACHE INTERNAL "No curl Windows LDAP")
if(CMAKE_USE_OPENSSL)
elseif(WIN32)
unset(CMAKE_USE_WINSSL CACHE)
set(CMAKE_USE_SCHANNEL ON)
set(CURL_WINDOWS_SSPI ON CACHE INTERNAL "Use windows libraries to allow NTLM authentication without openssl")
elseif(APPLE)
# Use OS X SSL/TLS native implementation if available on target version.
if(CMAKE_OSX_DEPLOYMENT_TARGET)
set(OSX_VERSION ${CMAKE_OSX_DEPLOYMENT_TARGET})
else()
execute_process(
COMMAND sw_vers -productVersion
OUTPUT_VARIABLE OSX_VERSION
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endif()
if(NOT OSX_VERSION VERSION_LESS 10.6 AND
CMAKE_C_COMPILER_ID MATCHES "GNU|Clang|AppleClang")
set(CMAKE_USE_SECTRANSP ON CACHE INTERNAL "enable Apple OS native SSL/TLS")
else()
set(CMAKE_USE_SECTRANSP OFF CACHE INTERNAL "enable Apple OS native SSL/TLS")
endif()
unset(CMAKE_USE_DARWINSSL CACHE)
endif()
set(CMAKE_USE_MBEDTLS OFF CACHE INTERNAL "Enable mbedTLS for SSL/TLS")
set(CMAKE_USE_BEARSSL OFF CACHE INTERNAL "Enable BearSSL for SSL/TLS")
set(CMAKE_USE_NSS OFF CACHE INTERNAL "Enable NSS for SSL/TLS")
set(CMAKE_USE_WOLFSSL OFF)
# Windows Vista and above have inet_pton, but this will link on
# older versions and then the executable will fail to launch at
# runtime on older versions because no DLL provides the symbol.
if(WIN32)
set(HAVE_INET_PTON 0 CACHE INTERNAL "Do not use inet_pton")
endif()
# Starting with OSX 10.11 there is an unrelated libnetwork library which will
# be picked up during curl configuration. Linking against this library is
# unnecessary and breaks backward compatibility of the resulting binaries
# because libnetwork is unavailable on older OSX versions.
if(APPLE)
set(HAVE_LIBNETWORK 0 CACHE INTERNAL "Do not use libnetwork")
endif(APPLE)
# Disable warnings to avoid changing 3rd party code.
if(CMAKE_C_COMPILER_ID MATCHES
"^(GNU|Clang|AppleClang|XLClang|XL|VisualAge|SunPro|HP|Intel|IntelLLVM|NVHPC)$")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -w")
elseif(CMAKE_C_COMPILER_ID STREQUAL "PathScale")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -woffall")
endif()
#***************************************************************************
# _ _ ____ _
# Project ___| | | | _ \| |
# / __| | | | |_) | |
# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
###########################################################################
# curl/libcurl CMake script
# by Tetetest and Sukender (Benoit Neil)
# TODO:
# The output .so file lacks the soname number which we currently have within the lib/Makefile.am file
# Add full (4 or 5 libs) SSL support
# Add INSTALL target (EXTRA_DIST variables in Makefile.am may be moved to Makefile.inc so that CMake/CPack is aware of what's to include).
# Check on all possible platforms
# Test with as many configurations possible (With or without any option)
# Create scripts that help keeping the CMake build system up to date (to reduce maintenance). According to Tetetest:
# - lists of headers that 'configure' checks for;
# - curl-specific tests (the ones that are in m4/curl-*.m4 files);
# - (most obvious thing:) curl version numbers.
# Add documentation subproject
#
# To check:
# (From Daniel Stenberg) The cmake build selected to run gcc with -fPIC on my box while the plain configure script did not.
# (From Daniel Stenberg) The gcc command line use neither -g nor any -O options. As a developer, I also treasure our configure scripts's --enable-debug option that sets a long range of "picky" compiler options.
set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/CMake;${CMAKE_MODULE_PATH}")
include(Utilities)
include(Macros)
include(CMakeDependentOption)
include(CheckCCompilerFlag)
project(CURL C)
file(STRINGS ${CURL_SOURCE_DIR}/include/curl/curlver.h CURL_VERSION_H_CONTENTS REGEX "#define LIBCURL_VERSION( |_NUM )")
string(REGEX MATCH "#define LIBCURL_VERSION \"[^\"]*"
CURL_VERSION ${CURL_VERSION_H_CONTENTS})
string(REGEX REPLACE "[^\"]+\"" "" CURL_VERSION ${CURL_VERSION})
string(REGEX MATCH "#define LIBCURL_VERSION_NUM 0x[0-9a-fA-F]+"
CURL_VERSION_NUM ${CURL_VERSION_H_CONTENTS})
string(REGEX REPLACE "[^0]+0x" "" CURL_VERSION_NUM ${CURL_VERSION_NUM})
# Setup package meta-data
# SET(PACKAGE "curl")
if(0) # This code not needed for building within CMake.
message(STATUS "curl version=[${CURL_VERSION}]")
endif()
# SET(PACKAGE_TARNAME "curl")
# SET(PACKAGE_NAME "curl")
# SET(PACKAGE_VERSION "-")
# SET(PACKAGE_STRING "curl-")
# SET(PACKAGE_BUGREPORT "a suitable curl mailing list => https://curl.se/mail/")
set(OPERATING_SYSTEM "${CMAKE_SYSTEM_NAME}")
set(OS "\"${CMAKE_SYSTEM_NAME}\"")
include_directories(${CURL_SOURCE_DIR}/include)
option(CURL_WERROR "Turn compiler warnings into errors" OFF)
option(PICKY_COMPILER "Enable picky compiler options" ON)
option(BUILD_CURL_EXE "Set to ON to build curl executable." ON)
option(BUILD_SHARED_LIBS "Build shared libraries" ON)
option(ENABLE_ARES "Set to ON to enable c-ares support" OFF)
if(WIN32)
option(CURL_STATIC_CRT "Set to ON to build libcurl with static CRT on Windows (/MT)." OFF)
option(ENABLE_INET_PTON "Set to OFF to prevent usage of inet_pton when building against modern SDKs while still requiring compatibility with older Windows versions, such as Windows XP, Windows Server 2003 etc." ON)
option(ENABLE_UNICODE "Set to ON to use the Unicode version of the Windows API functions" OFF)
if(0) # This code not needed for building within CMake.
set(CURL_TARGET_WINDOWS_VERSION "" CACHE STRING "Minimum target Windows version as hex string")
if(CURL_TARGET_WINDOWS_VERSION)
add_definitions(-D_WIN32_WINNT=${CURL_TARGET_WINDOWS_VERSION})
set(CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} -D_WIN32_WINNT=${CURL_TARGET_WINDOWS_VERSION}")
elseif(ENABLE_INET_PTON)
# _WIN32_WINNT_VISTA (0x0600)
add_definitions(-D_WIN32_WINNT=0x0600)
set(CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} -D_WIN32_WINNT=0x0600")
else()
# _WIN32_WINNT_WINXP (0x0501)
add_definitions(-D_WIN32_WINNT=0x0501)
set(CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} -D_WIN32_WINNT=0x0501")
endif()
endif()
if(ENABLE_UNICODE)
add_definitions(-DUNICODE -D_UNICODE)
if(MINGW)
add_compile_options(-municode)
endif()
endif()
endif()
option(CURL_LTO "Turn on compiler Link Time Optimizations" OFF)
if(0) # This code not needed for building within CMake.
cmake_dependent_option(ENABLE_THREADED_RESOLVER "Set to ON to enable threaded DNS lookup"
ON "NOT ENABLE_ARES"
OFF)
endif()
option(ENABLE_DEBUG "Set to ON to enable curl debug features" OFF)
option(ENABLE_CURLDEBUG "Set to ON to build with TrackMemory feature enabled" OFF)
if(CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_CLANG)
if(PICKY_COMPILER)
foreach(_CCOPT -pedantic -Wall -W -Wpointer-arith -Wwrite-strings -Wunused -Wshadow -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wfloat-equal -Wsign-compare -Wundef -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wstrict-aliasing=3 -Wcast-align -Wtype-limits -Wold-style-declaration -Wmissing-parameter-type -Wempty-body -Wclobbered -Wignored-qualifiers -Wconversion -Wvla -Wdouble-promotion)
# surprisingly, CHECK_C_COMPILER_FLAG needs a new variable to store each new
# test result in.
string(MAKE_C_IDENTIFIER "OPT${_CCOPT}" _optvarname)
check_c_compiler_flag(${_CCOPT} ${_optvarname})
if(${_optvarname})
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${_CCOPT}")
endif()
endforeach()
foreach(_CCOPT long-long multichar format-nonliteral sign-conversion system-headers pedantic-ms-format)
# GCC only warns about unknown -Wno- options if there are also other diagnostic messages,
# so test for the positive form instead
string(MAKE_C_IDENTIFIER "OPT${_CCOPT}" _optvarname)
check_c_compiler_flag("-W${_CCOPT}" ${_optvarname})
if(${_optvarname})
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wno-${_CCOPT}")
endif()
endforeach()
endif()
endif()
if(ENABLE_DEBUG)
# DEBUGBUILD will be defined only for Debug builds
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS $<$<CONFIG:Debug>:DEBUGBUILD>)
set(ENABLE_CURLDEBUG ON)
endif()
if(ENABLE_CURLDEBUG)
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS CURLDEBUG)
endif()
if(0) # This code not needed for building within CMake.
# For debug libs and exes, add "-d" postfix
if(NOT DEFINED CMAKE_DEBUG_POSTFIX)
set(CMAKE_DEBUG_POSTFIX "-d")
endif()
endif()
# initialize CURL_LIBS
set(CURL_LIBS "")
if(ENABLE_ARES)
set(USE_ARES 1)
find_package(CARES REQUIRED)
list(APPEND CURL_LIBS ${CARES_LIBRARY})
endif()
if(0) # This code not needed for building within CMake.
include(CurlSymbolHiding)
endif()
option(CURL_ENABLE_EXPORT_TARGET "to enable cmake export target" ON)
mark_as_advanced(CURL_ENABLE_EXPORT_TARGET)
option(CURL_DISABLE_ALTSVC "disables alt-svc support" OFF)
mark_as_advanced(CURL_DISABLE_ALTSVC)
option(CURL_DISABLE_COOKIES "disables cookies support" OFF)
mark_as_advanced(CURL_DISABLE_COOKIES)
option(CURL_DISABLE_CRYPTO_AUTH "disables cryptographic authentication" OFF)
mark_as_advanced(CURL_DISABLE_CRYPTO_AUTH)
option(CURL_DISABLE_DICT "disables DICT" OFF)
mark_as_advanced(CURL_DISABLE_DICT)
option(CURL_DISABLE_DOH "disables DNS-over-HTTPS" OFF)
mark_as_advanced(CURL_DISABLE_DOH)
option(CURL_DISABLE_FILE "disables FILE" OFF)
mark_as_advanced(CURL_DISABLE_FILE)
option(CURL_DISABLE_FTP "disables FTP" OFF)
mark_as_advanced(CURL_DISABLE_FTP)
option(CURL_DISABLE_GETOPTIONS "disables curl_easy_options API for existing options to curl_easy_setopt" OFF)
mark_as_advanced(CURL_DISABLE_GETOPTIONS)
option(CURL_DISABLE_GOPHER "disables Gopher" OFF)
mark_as_advanced(CURL_DISABLE_GOPHER)
option(CURL_DISABLE_HSTS "disables HSTS support" OFF)
mark_as_advanced(CURL_DISABLE_HSTS)
option(CURL_DISABLE_HTTP "disables HTTP" OFF)
mark_as_advanced(CURL_DISABLE_HTTP)
option(CURL_DISABLE_HTTP_AUTH "disables all HTTP authentication methods" OFF)
mark_as_advanced(CURL_DISABLE_HTTP_AUTH)
option(CURL_DISABLE_IMAP "disables IMAP" OFF)
mark_as_advanced(CURL_DISABLE_IMAP)
option(CURL_DISABLE_LDAP "disables LDAP" OFF)
mark_as_advanced(CURL_DISABLE_LDAP)
option(CURL_DISABLE_LDAPS "disables LDAPS" OFF)
mark_as_advanced(CURL_DISABLE_LDAPS)
option(CURL_DISABLE_LIBCURL_OPTION "disables --libcurl option from the curl tool" OFF)
mark_as_advanced(CURL_DISABLE_LIBCURL_OPTION)
option(CURL_DISABLE_MIME "disables MIME support" OFF)
mark_as_advanced(CURL_DISABLE_MIME)
option(CURL_DISABLE_MQTT "disables MQTT" OFF)
mark_as_advanced(CURL_DISABLE_MQTT)
option(CURL_DISABLE_NETRC "disables netrc parser" OFF)
mark_as_advanced(CURL_DISABLE_NETRC)
option(CURL_DISABLE_NTLM "disables NTLM support" OFF)
mark_as_advanced(CURL_DISABLE_NTLM)
option(CURL_DISABLE_PARSEDATE "disables date parsing" OFF)
mark_as_advanced(CURL_DISABLE_PARSEDATE)
option(CURL_DISABLE_POP3 "disables POP3" OFF)
mark_as_advanced(CURL_DISABLE_POP3)
option(CURL_DISABLE_PROGRESS_METER "disables built-in progress meter" OFF)
mark_as_advanced(CURL_DISABLE_PROGRESS_METER)
option(CURL_DISABLE_PROXY "disables proxy support" OFF)
mark_as_advanced(CURL_DISABLE_PROXY)
option(CURL_DISABLE_RTSP "disables RTSP" OFF)
mark_as_advanced(CURL_DISABLE_RTSP)
option(CURL_DISABLE_SHUFFLE_DNS "disables shuffle DNS feature" OFF)
mark_as_advanced(CURL_DISABLE_SHUFFLE_DNS)
option(CURL_DISABLE_SMB "disables SMB" OFF)
mark_as_advanced(CURL_DISABLE_SMB)
option(CURL_DISABLE_SMTP "disables SMTP" OFF)
mark_as_advanced(CURL_DISABLE_SMTP)
option(CURL_DISABLE_SOCKETPAIR "disables use of socketpair for curl_multi_poll" OFF)
mark_as_advanced(CURL_DISABLE_SOCKETPAIR)
option(CURL_DISABLE_TELNET "disables Telnet" OFF)
mark_as_advanced(CURL_DISABLE_TELNET)
option(CURL_DISABLE_TFTP "disables TFTP" OFF)
mark_as_advanced(CURL_DISABLE_TFTP)
option(CURL_DISABLE_VERBOSE_STRINGS "disables verbose strings" OFF)
mark_as_advanced(CURL_DISABLE_VERBOSE_STRINGS)
# Corresponds to HTTP_ONLY in lib/curl_setup.h
option(HTTP_ONLY "disables all protocols except HTTP (This overrides all CURL_DISABLE_* options)" OFF)
mark_as_advanced(HTTP_ONLY)
if(HTTP_ONLY)
set(CURL_DISABLE_DICT ON)
set(CURL_DISABLE_FILE ON)
set(CURL_DISABLE_FTP ON)
set(CURL_DISABLE_GOPHER ON)
set(CURL_DISABLE_IMAP ON)
set(CURL_DISABLE_LDAP ON)
set(CURL_DISABLE_LDAPS ON)
set(CURL_DISABLE_MQTT ON)
set(CURL_DISABLE_POP3 ON)
set(CURL_DISABLE_RTSP ON)
set(CURL_DISABLE_SMB ON)
set(CURL_DISABLE_SMTP ON)
set(CURL_DISABLE_TELNET ON)
set(CURL_DISABLE_TFTP ON)
endif()
option(ENABLE_IPV6 "Define if you want to enable IPv6 support" ON)
mark_as_advanced(ENABLE_IPV6)
if(ENABLE_IPV6 AND NOT WIN32)
include(CheckStructHasMember)
check_struct_has_member("struct sockaddr_in6" sin6_addr "netinet/in.h"
HAVE_SOCKADDR_IN6_SIN6_ADDR)
check_struct_has_member("struct sockaddr_in6" sin6_scope_id "netinet/in.h"
HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID)
if(NOT HAVE_SOCKADDR_IN6_SIN6_ADDR)
message(WARNING "struct sockaddr_in6 not available, disabling IPv6 support")
# Force the feature off as this name is used as guard macro...
set(ENABLE_IPV6 OFF
CACHE BOOL "Define if you want to enable IPv6 support" FORCE)
endif()
endif()
if(0) # This code not needed for building within CMake.
if(USE_MANUAL)
#nroff is currently only used when USE_MANUAL is set, so we can prevent the warning of no *NROFF if USE_MANUAL is OFF (or not defined), by not even looking for NROFF..
curl_nroff_check()
endif()
find_package(Perl)
cmake_dependent_option(ENABLE_MANUAL "to provide the built-in manual"
ON "NROFF_USEFUL;PERL_FOUND"
OFF)
if(ENABLE_MANUAL)
set(USE_MANUAL ON)
endif()
endif()
if(CURL_STATIC_CRT)
set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>")
set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MT")
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MTd")
endif()
# Disable warnings on Borland to avoid changing 3rd party code.
if(BORLAND)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -w-")
endif()
# If we are on AIX, do the _ALL_SOURCE magic
if(${CMAKE_SYSTEM_NAME} MATCHES AIX)
set(_ALL_SOURCE 1)
endif()
# Include all the necessary files for macros
include(CMakePushCheckState)
include(CheckFunctionExists)
include(CheckIncludeFile)
include(CheckIncludeFiles)
include(CheckLibraryExists)
include(CheckSymbolExists)
include(CheckTypeSize)
include(CheckCSourceCompiles)
# On windows preload settings
if(WIN32)
set(CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} -D_WINSOCKAPI_=")
include(${CMAKE_CURRENT_SOURCE_DIR}/CMake/Platforms/WindowsCache.cmake)
endif()
if(ENABLE_THREADED_RESOLVER)
find_package(Threads REQUIRED)
if(WIN32)
set(USE_THREADS_WIN32 ON)
else()
set(USE_THREADS_POSIX ${CMAKE_USE_PTHREADS_INIT})
set(HAVE_PTHREAD_H ${CMAKE_USE_PTHREADS_INIT})
endif()
set(CURL_LIBS ${CURL_LIBS} ${CMAKE_THREAD_LIBS_INIT})
endif()
# Check for all needed libraries
if(0) # This code not needed for building within CMake.
check_library_exists_concat("${CMAKE_DL_LIBS}" dlopen HAVE_LIBDL)
else()
# Use the cmake-defined dl libs as dl is should not be used
# on HPUX, but rather dld this avoids a warning
list(APPEND CURL_LIBS ${CMAKE_DL_LIBS})
endif()
check_library_exists_concat("socket" connect HAVE_LIBSOCKET)
check_library_exists("c" gethostbyname "" NOT_NEED_LIBNSL)
# Yellowtab Zeta needs different libraries than BeOS 5.
if(BEOS)
set(NOT_NEED_LIBNSL 1)
check_library_exists_concat("bind" gethostbyname HAVE_LIBBIND)
check_library_exists_concat("bnetapi" closesocket HAVE_LIBBNETAPI)
endif()
check_library_exists_concat("network" recv HAVE_LIBNETWORK)
if(NOT NOT_NEED_LIBNSL)
check_library_exists_concat("nsl" gethostbyname HAVE_LIBNSL)
endif()
check_function_exists(gethostname HAVE_GETHOSTNAME)
if(WIN32)
check_library_exists_concat("ws2_32" getch HAVE_LIBWS2_32)
check_library_exists_concat("winmm" getch HAVE_LIBWINMM)
endif()
# check SSL libraries
# TODO support GnuTLS
if(CMAKE_USE_WINSSL)
message(FATAL_ERROR "The cmake option CMAKE_USE_WINSSL was renamed to CMAKE_USE_SCHANNEL.")
endif()
if(APPLE)
option(CMAKE_USE_SECTRANSP "enable Apple OS native SSL/TLS" OFF)
endif()
if(WIN32)
option(CMAKE_USE_SCHANNEL "enable Windows native SSL/TLS" OFF)
cmake_dependent_option(CURL_WINDOWS_SSPI "Use windows libraries to allow NTLM authentication without openssl" ON
CMAKE_USE_SCHANNEL OFF)
endif()
option(CMAKE_USE_MBEDTLS "Enable mbedTLS for SSL/TLS" OFF)
option(CMAKE_USE_BEARSSL "Enable BearSSL for SSL/TLS" OFF)
option(CMAKE_USE_NSS "Enable NSS for SSL/TLS" OFF)
option(CMAKE_USE_WOLFSSL "enable wolfSSL for SSL/TLS" OFF)
set(openssl_default ON)
if(WIN32 OR CMAKE_USE_SECTRANSP OR CMAKE_USE_SCHANNEL OR CMAKE_USE_MBEDTLS OR CMAKE_USE_NSS OR CMAKE_USE_WOLFSSL)
set(openssl_default OFF)
endif()
option(CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG "Disable automatic loading of OpenSSL configuration" OFF)
count_true(enabled_ssl_options_count
CMAKE_USE_SCHANNEL
CMAKE_USE_SECTRANSP
CMAKE_USE_OPENSSL
CMAKE_USE_MBEDTLS
CMAKE_USE_BEARSSL
CMAKE_USE_NSS
CMAKE_USE_WOLFSSL
)
if(enabled_ssl_options_count GREATER "1")
set(CURL_WITH_MULTI_SSL ON)
endif()
if(CMAKE_USE_SCHANNEL)
set(SSL_ENABLED ON)
set(USE_SCHANNEL ON) # Windows native SSL/TLS support
set(USE_WINDOWS_SSPI ON) # CMAKE_USE_SCHANNEL implies CURL_WINDOWS_SSPI
endif()
if(CURL_WINDOWS_SSPI)
set(USE_WINDOWS_SSPI ON)
set(CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} -DSECURITY_WIN32")
endif()
if(CMAKE_USE_DARWINSSL)
message(FATAL_ERROR "The cmake option CMAKE_USE_DARWINSSL was renamed to CMAKE_USE_SECTRANSP.")
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
find_library(COREFOUNDATION_FRAMEWORK "CoreFoundation")
if(NOT COREFOUNDATION_FRAMEWORK)
message(FATAL_ERROR "CoreFoundation framework not found")
endif()
find_library(SYSTEMCONFIGURATION_FRAMEWORK "SystemConfiguration")
if(NOT SYSTEMCONFIGURATION_FRAMEWORK)
message(FATAL_ERROR "SystemConfiguration framework not found")
endif()
list(APPEND CURL_LIBS "-framework CoreFoundation" "-framework SystemConfiguration")
if(CMAKE_USE_SECTRANSP)
find_library(SECURITY_FRAMEWORK "Security")
if(NOT SECURITY_FRAMEWORK)
message(FATAL_ERROR "Security framework not found")
endif()
set(SSL_ENABLED ON)
set(USE_SECTRANSP ON)
list(APPEND CURL_LIBS "-framework Security")
endif()
endif()
if(CMAKE_USE_OPENSSL)
find_package(OpenSSL)
if(NOT OpenSSL_FOUND)
message(FATAL_ERROR
"Could not find OpenSSL. Install an OpenSSL development package or "
"configure CMake with -DCMAKE_USE_OPENSSL=OFF to build without OpenSSL.")
endif()
set(SSL_ENABLED ON)
set(USE_OPENSSL ON)
list(APPEND CURL_LIBS ${OPENSSL_LIBRARIES})
include_directories(${OPENSSL_INCLUDE_DIR})
set(CMAKE_REQUIRED_INCLUDES ${OPENSSL_INCLUDE_DIR})
check_include_file("openssl/crypto.h" HAVE_OPENSSL_CRYPTO_H)
check_include_file("openssl/err.h" HAVE_OPENSSL_ERR_H)
check_include_file("openssl/pem.h" HAVE_OPENSSL_PEM_H)
check_include_file("openssl/rsa.h" HAVE_OPENSSL_RSA_H)
check_include_file("openssl/ssl.h" HAVE_OPENSSL_SSL_H)
check_include_file("openssl/x509.h" HAVE_OPENSSL_X509_H)
check_include_file("openssl/rand.h" HAVE_OPENSSL_RAND_H)
check_symbol_exists(RAND_status "${CURL_INCLUDES}" HAVE_RAND_STATUS)
check_symbol_exists(RAND_screen "${CURL_INCLUDES}" HAVE_RAND_SCREEN)
check_symbol_exists(RAND_egd "${CURL_INCLUDES}" HAVE_RAND_EGD)
# Optionally build with a specific CA cert bundle.
if(CURL_CA_BUNDLE)
add_definitions(-DCURL_CA_BUNDLE="${CURL_CA_BUNDLE}")
endif()
# Optionally build with a specific CA cert dir.
if(CURL_CA_PATH)
add_definitions(-DCURL_CA_PATH="${CURL_CA_PATH}")
endif()
endif()
if(CMAKE_USE_MBEDTLS)
find_package(MbedTLS REQUIRED)
set(SSL_ENABLED ON)
set(USE_MBEDTLS ON)
list(APPEND CURL_LIBS ${MBEDTLS_LIBRARIES})
include_directories(${MBEDTLS_INCLUDE_DIRS})
endif()
if(CMAKE_USE_BEARSSL)
find_package(BearSSL REQUIRED)
set(SSL_ENABLED ON)
set(USE_BEARSSL ON)
list(APPEND CURL_LIBS ${BEARSSL_LIBRARY})
include_directories(${BEARSSL_INCLUDE_DIRS})
endif()
if(CMAKE_USE_WOLFSSL)
find_package(WolfSSL REQUIRED)
set(SSL_ENABLED ON)
set(USE_WOLFSSL ON)
list(APPEND CURL_LIBS ${WolfSSL_LIBRARIES})
include_directories(${WolfSSL_INCLUDE_DIRS})
endif()
if(CMAKE_USE_NSS)
find_package(NSS REQUIRED)
include_directories(${NSS_INCLUDE_DIRS})
list(APPEND CURL_LIBS ${NSS_LIBRARIES})
set(SSL_ENABLED ON)
set(USE_NSS ON)
cmake_push_check_state()
set(CMAKE_REQUIRED_INCLUDES ${NSS_INCLUDE_DIRS})
set(CMAKE_REQUIRED_LIBRARIES ${NSS_LIBRARIES})
check_symbol_exists(PK11_CreateManagedGenericObject "pk11pub.h" HAVE_PK11_CREATEMANAGEDGENERICOBJECT)
cmake_pop_check_state()
endif()
option(USE_NGHTTP2 "Use Nghttp2 library" OFF)
if(USE_NGHTTP2)
find_package(NGHTTP2 REQUIRED)
include_directories(${NGHTTP2_INCLUDE_DIRS})
list(APPEND CURL_LIBS ${NGHTTP2_LIBRARIES})
endif()
function(CheckQuicSupportInOpenSSL)
# Be sure that the OpenSSL library actually supports QUIC.
cmake_push_check_state()
set(CMAKE_REQUIRED_INCLUDES "${OPENSSL_INCLUDE_DIR}")
set(CMAKE_REQUIRED_LIBRARIES "${OPENSSL_LIBRARIES}")
check_symbol_exists(SSL_CTX_set_quic_method "openssl/ssl.h" HAVE_SSL_CTX_SET_QUIC_METHOD)
if(NOT HAVE_SSL_CTX_SET_QUIC_METHOD)
message(FATAL_ERROR "QUIC support is missing in OpenSSL/boringssl. Try setting -DOPENSSL_ROOT_DIR")
endif()
cmake_pop_check_state()
endfunction()
option(USE_NGTCP2 "Use ngtcp2 and nghttp3 libraries for HTTP/3 support" OFF)
if(USE_NGTCP2)
if(USE_OPENSSL)
find_package(NGTCP2 REQUIRED OpenSSL)
CheckQuicSupportInOpenSSL()
elseif(USE_GNUTLS)
# TODO add GnuTLS support as vtls library.
find_package(NGTCP2 REQUIRED GnuTLS)
else()
message(FATAL_ERROR "ngtcp2 requires OpenSSL or GnuTLS")
endif()
set(USE_NGTCP2 ON)
include_directories(${NGTCP2_INCLUDE_DIRS})
list(APPEND CURL_LIBS ${NGTCP2_LIBRARIES})
find_package(NGHTTP3 REQUIRED)
set(USE_NGHTTP3 ON)
include_directories(${NGHTTP3_INCLUDE_DIRS})
list(APPEND CURL_LIBS ${NGHTTP3_LIBRARIES})
endif()
option(USE_QUICHE "Use quiche library for HTTP/3 support" OFF)
if(USE_QUICHE)
if(USE_NGTCP2)
message(FATAL_ERROR "Only one HTTP/3 backend can be selected!")
endif()
find_package(QUICHE REQUIRED)
CheckQuicSupportInOpenSSL()
set(USE_QUICHE ON)
include_directories(${QUICHE_INCLUDE_DIRS})
list(APPEND CURL_LIBS ${QUICHE_LIBRARIES})
cmake_push_check_state()
set(CMAKE_REQUIRED_INCLUDES "${QUICHE_INCLUDE_DIRS}")
set(CMAKE_REQUIRED_LIBRARIES "${QUICHE_LIBRARIES}")
check_symbol_exists(quiche_conn_set_qlog_fd "quiche.h" HAVE_QUICHE_CONN_SET_QLOG_FD)
cmake_pop_check_state()
endif()
if(NOT CURL_DISABLE_LDAP)
if(WIN32)
option(USE_WIN32_LDAP "Use Windows LDAP implementation" ON)
if(USE_WIN32_LDAP)
check_library_exists_concat("wldap32" cldap_open HAVE_WLDAP32)
if(NOT HAVE_WLDAP32)
set(USE_WIN32_LDAP OFF)
endif()
endif()
endif()
option(CMAKE_USE_OPENLDAP "Use OpenLDAP code." OFF)
mark_as_advanced(CMAKE_USE_OPENLDAP)
set(CMAKE_LDAP_LIB "ldap" CACHE STRING "Name or full path to ldap library")
set(CMAKE_LBER_LIB "lber" CACHE STRING "Name or full path to lber library")
if(CMAKE_USE_OPENLDAP AND USE_WIN32_LDAP)
message(FATAL_ERROR "Cannot use USE_WIN32_LDAP and CMAKE_USE_OPENLDAP at the same time")
endif()
# Now that we know, we're not using windows LDAP...
if(USE_WIN32_LDAP)
check_include_file_concat("winldap.h" HAVE_WINLDAP_H)
check_include_file_concat("winber.h" HAVE_WINBER_H)
else()
# Check for LDAP
set(CMAKE_REQUIRED_LIBRARIES ${OPENSSL_LIBRARIES})
check_library_exists_concat(${CMAKE_LDAP_LIB} ldap_init HAVE_LIBLDAP)
check_library_exists_concat(${CMAKE_LBER_LIB} ber_init HAVE_LIBLBER)
set(CMAKE_REQUIRED_INCLUDES_BAK ${CMAKE_REQUIRED_INCLUDES})
set(CMAKE_LDAP_INCLUDE_DIR "" CACHE STRING "Path to LDAP include directory")
if(CMAKE_LDAP_INCLUDE_DIR)
list(APPEND CMAKE_REQUIRED_INCLUDES ${CMAKE_LDAP_INCLUDE_DIR})
endif()
check_include_file_concat("ldap.h" HAVE_LDAP_H)
check_include_file_concat("lber.h" HAVE_LBER_H)
if(NOT HAVE_LDAP_H)
message(STATUS "LDAP_H not found CURL_DISABLE_LDAP set ON")
set(CURL_DISABLE_LDAP ON CACHE BOOL "" FORCE)
set(CMAKE_REQUIRED_INCLUDES ${CMAKE_REQUIRED_INCLUDES_BAK}) #LDAP includes won't be used
elseif(NOT HAVE_LIBLDAP)
message(STATUS "LDAP library '${CMAKE_LDAP_LIB}' not found CURL_DISABLE_LDAP set ON")
set(CURL_DISABLE_LDAP ON CACHE BOOL "" FORCE)
set(CMAKE_REQUIRED_INCLUDES ${CMAKE_REQUIRED_INCLUDES_BAK}) #LDAP includes won't be used
else()
if(CMAKE_USE_OPENLDAP)
set(USE_OPENLDAP ON)
endif()
if(CMAKE_LDAP_INCLUDE_DIR)
include_directories(${CMAKE_LDAP_INCLUDE_DIR})
endif()
set(NEED_LBER_H ON)
set(_HEADER_LIST)
if(HAVE_WINDOWS_H)
list(APPEND _HEADER_LIST "windows.h")
endif()
if(HAVE_SYS_TYPES_H)
list(APPEND _HEADER_LIST "sys/types.h")
endif()
list(APPEND _HEADER_LIST "ldap.h")
set(_SRC_STRING "")
foreach(_HEADER ${_HEADER_LIST})
set(_INCLUDE_STRING "${_INCLUDE_STRING}#include <${_HEADER}>\n")
endforeach()
set(_SRC_STRING
"
${_INCLUDE_STRING}
int main(int argc, char ** argv)
{
BerValue *bvp = NULL;
BerElement *bep = ber_init(bvp);
ber_free(bep, 1);
return 0;
}"
)
set(CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS} -DLDAP_DEPRECATED=1")
list(APPEND CMAKE_REQUIRED_LIBRARIES ${CMAKE_LDAP_LIB})
if(HAVE_LIBLBER)
list(APPEND CMAKE_REQUIRED_LIBRARIES ${CMAKE_LBER_LIB})
endif()
check_c_source_compiles("${_SRC_STRING}" NOT_NEED_LBER_H)
unset(CMAKE_REQUIRED_LIBRARIES)
if(NOT_NEED_LBER_H)
set(NEED_LBER_H OFF)
else()
set(CURL_TEST_DEFINES "${CURL_TEST_DEFINES} -DNEED_LBER_H")
endif()
endif()
endif()
endif()
# No ldap, no ldaps.
if(CURL_DISABLE_LDAP)
if(NOT CURL_DISABLE_LDAPS)
message(STATUS "LDAP needs to be enabled to support LDAPS")
set(CURL_DISABLE_LDAPS ON CACHE BOOL "" FORCE)
endif()
endif()
if(NOT CURL_DISABLE_LDAPS)
check_include_file_concat("ldap_ssl.h" HAVE_LDAP_SSL_H)
check_include_file_concat("ldapssl.h" HAVE_LDAPSSL_H)
endif()
# Check for idn
option(USE_LIBIDN2 "Use libidn2 for IDN support" ON)
set(HAVE_LIBIDN2 OFF)
if(USE_LIBIDN2)
check_library_exists_concat("idn2" idn2_lookup_ul HAVE_LIBIDN2)
endif()
if(WIN32)
option(USE_WIN32_IDN "Use WinIDN for IDN support" OFF)
if(USE_WIN32_IDN)
list(APPEND CURL_LIBS "Normaliz")
set(WANT_IDN_PROTOTYPES ON)
endif()
endif()
# Check for symbol dlopen (same as HAVE_LIBDL)
check_library_exists("${CURL_LIBS}" dlopen "" HAVE_DLOPEN)
if(0) # This code not needed for building within CMake.
set(HAVE_LIBZ OFF)
set(HAVE_ZLIB_H OFF)
set(USE_ZLIB OFF)
optional_dependency(ZLIB)
if(ZLIB_FOUND)
set(HAVE_ZLIB_H ON)
set(HAVE_LIBZ ON)
set(USE_ZLIB ON)
# Depend on ZLIB via imported targets if supported by the running
# version of CMake. This allows our dependents to get our dependencies
# transitively.
if(NOT CMAKE_VERSION VERSION_LESS 3.4)
list(APPEND CURL_LIBS ZLIB::ZLIB)
else()
list(APPEND CURL_LIBS ${ZLIB_LIBRARIES})
include_directories(${ZLIB_INCLUDE_DIRS})
endif()
list(APPEND CMAKE_REQUIRED_INCLUDES ${ZLIB_INCLUDE_DIRS})
endif()
endif()
#-----------------------------------------------------------------------------
# CMake-specific curl code.
if(CURL_SPECIAL_LIBZ)
set(CURL_LIBS ${CURL_LIBS} "${CURL_SPECIAL_LIBZ}")
include_directories(${CURL_SPECIAL_LIBZ_INCLUDES})
set(HAVE_LIBZ 0)
set(HAVE_ZLIB_H 0)
endif()
option(CURL_BROTLI "Set to ON to enable building curl with brotli support." OFF)
set(HAVE_BROTLI OFF)
if(CURL_BROTLI)
find_package(Brotli QUIET)
if(BROTLI_FOUND)
set(HAVE_BROTLI ON)
list(APPEND CURL_LIBS ${BROTLI_LIBRARIES})
include_directories(${BROTLI_INCLUDE_DIRS})
list(APPEND CMAKE_REQUIRED_INCLUDES ${BROTLI_INCLUDE_DIRS})
endif()
endif()
option(CURL_ZSTD "Set to ON to enable building curl with zstd support." OFF)
set(HAVE_ZSTD OFF)
if(CURL_ZSTD)
find_package(Zstd REQUIRED)
cmake_push_check_state()
set(CMAKE_REQUIRED_INCLUDES ${Zstd_INCLUDE_DIRS})
set(CMAKE_REQUIRED_LIBRARIES ${Zstd_LIBRARIES})
check_symbol_exists(ZSTD_createDStream "zstd.h" HAVE_ZSTD_CREATEDSTREAM)
cmake_pop_check_state()
if(Zstd_FOUND AND HAVE_ZSTD_CREATEDSTREAM)
set(HAVE_ZSTD ON)
list(APPEND CURL_LIBS ${Zstd_LIBRARIES})
include_directories(${Zstd_INCLUDE_DIRS})
endif()
endif()
#libSSH2
option(CMAKE_USE_LIBSSH2 "Use libSSH2" ON)
mark_as_advanced(CMAKE_USE_LIBSSH2)
set(USE_LIBSSH2 OFF)
set(HAVE_LIBSSH2 OFF)
set(HAVE_LIBSSH2_H OFF)
if(CMAKE_USE_LIBSSH2)
find_package(LibSSH2)
if(LIBSSH2_FOUND)
list(APPEND CURL_LIBS ${LIBSSH2_LIBRARY})
set(CMAKE_REQUIRED_LIBRARIES ${LIBSSH2_LIBRARY})
list(APPEND CMAKE_REQUIRED_INCLUDES "${LIBSSH2_INCLUDE_DIR}")
include_directories("${LIBSSH2_INCLUDE_DIR}")
set(HAVE_LIBSSH2 ON)
set(USE_LIBSSH2 ON)
# find_package has already found the headers
set(HAVE_LIBSSH2_H ON)
set(CURL_INCLUDES ${CURL_INCLUDES} "${LIBSSH2_INCLUDE_DIR}/libssh2.h")
set(CURL_TEST_DEFINES "${CURL_TEST_DEFINES} -DHAVE_LIBSSH2_H")
unset(CMAKE_REQUIRED_LIBRARIES)
endif()
endif()
# libssh
option(CMAKE_USE_LIBSSH "Use libSSH" OFF)
mark_as_advanced(CMAKE_USE_LIBSSH)
if(NOT HAVE_LIBSSH2 AND CMAKE_USE_LIBSSH)
find_package(libssh CONFIG)
if(libssh_FOUND)
message(STATUS "Found libssh ${libssh_VERSION}")
# Use imported target for include and library paths.
list(APPEND CURL_LIBS ssh)
set(USE_LIBSSH ON)
set(HAVE_LIBSSH_LIBSSH_H 1)
endif()
endif()
option(CMAKE_USE_GSSAPI "Use GSSAPI implementation (right now only Heimdal is supported with CMake build)" OFF)
mark_as_advanced(CMAKE_USE_GSSAPI)
if(CMAKE_USE_GSSAPI)
find_package(GSS)
set(HAVE_GSSAPI ${GSS_FOUND})
if(GSS_FOUND)
message(STATUS "Found ${GSS_FLAVOUR} GSSAPI version: \"${GSS_VERSION}\"")
list(APPEND CMAKE_REQUIRED_INCLUDES ${GSS_INCLUDE_DIR})
check_include_file_concat("gssapi/gssapi.h" HAVE_GSSAPI_GSSAPI_H)
check_include_file_concat("gssapi/gssapi_generic.h" HAVE_GSSAPI_GSSAPI_GENERIC_H)
check_include_file_concat("gssapi/gssapi_krb5.h" HAVE_GSSAPI_GSSAPI_KRB5_H)
if(GSS_FLAVOUR STREQUAL "Heimdal")
set(HAVE_GSSHEIMDAL ON)
else() # MIT
set(HAVE_GSSMIT ON)
set(_INCLUDE_LIST "")
if(HAVE_GSSAPI_GSSAPI_H)
list(APPEND _INCLUDE_LIST "gssapi/gssapi.h")
endif()
if(HAVE_GSSAPI_GSSAPI_GENERIC_H)
list(APPEND _INCLUDE_LIST "gssapi/gssapi_generic.h")
endif()
if(HAVE_GSSAPI_GSSAPI_KRB5_H)
list(APPEND _INCLUDE_LIST "gssapi/gssapi_krb5.h")
endif()
string(REPLACE ";" " " _COMPILER_FLAGS_STR "${GSS_COMPILER_FLAGS}")
string(REPLACE ";" " " _LINKER_FLAGS_STR "${GSS_LINKER_FLAGS}")
foreach(_dir ${GSS_LINK_DIRECTORIES})
set(_LINKER_FLAGS_STR "${_LINKER_FLAGS_STR} -L\"${_dir}\"")
endforeach()
set(CMAKE_REQUIRED_FLAGS "${_COMPILER_FLAGS_STR} ${_LINKER_FLAGS_STR}")
set(CMAKE_REQUIRED_LIBRARIES ${GSS_LIBRARIES})
check_symbol_exists("GSS_C_NT_HOSTBASED_SERVICE" ${_INCLUDE_LIST} HAVE_GSS_C_NT_HOSTBASED_SERVICE)
if(NOT HAVE_GSS_C_NT_HOSTBASED_SERVICE)
set(HAVE_OLD_GSSMIT ON)
endif()
unset(CMAKE_REQUIRED_LIBRARIES)
endif()
include_directories(${GSS_INCLUDE_DIR})
link_directories(${GSS_LINK_DIRECTORIES})
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${GSS_COMPILER_FLAGS}")
set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} ${GSS_LINKER_FLAGS}")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${GSS_LINKER_FLAGS}")
set(CMAKE_STATIC_LINKER_FLAGS "${CMAKE_STATIC_LINKER_FLAGS} ${GSS_LINKER_FLAGS}")
list(APPEND CURL_LIBS ${GSS_LIBRARIES})
else()
message(WARNING "GSSAPI support has been requested but no supporting libraries found. Skipping.")
endif()
endif()
option(ENABLE_UNIX_SOCKETS "Define if you want Unix domain sockets support" ON)
if(ENABLE_UNIX_SOCKETS)
include(CheckStructHasMember)
if(WIN32)
set(USE_UNIX_SOCKETS ON)
else()
check_struct_has_member("struct sockaddr_un" sun_path "sys/un.h" USE_UNIX_SOCKETS)
endif()
else()
unset(USE_UNIX_SOCKETS CACHE)
endif()
if(0) # This code not needed for building within CMake.
#
# CA handling
#
set(CURL_CA_BUNDLE "auto" CACHE STRING
"Path to the CA bundle. Set 'none' to disable or 'auto' for auto-detection. Defaults to 'auto'.")
set(CURL_CA_FALLBACK OFF CACHE BOOL
"Set ON to use built-in CA store of TLS backend. Defaults to OFF")
set(CURL_CA_PATH "auto" CACHE STRING
"Location of default CA path. Set 'none' to disable or 'auto' for auto-detection. Defaults to 'auto'.")
if("${CURL_CA_BUNDLE}" STREQUAL "")
message(FATAL_ERROR "Invalid value of CURL_CA_BUNDLE. Use 'none', 'auto' or file path.")
elseif("${CURL_CA_BUNDLE}" STREQUAL "none")
unset(CURL_CA_BUNDLE CACHE)
elseif("${CURL_CA_BUNDLE}" STREQUAL "auto")
unset(CURL_CA_BUNDLE CACHE)
set(CURL_CA_BUNDLE_AUTODETECT TRUE)
else()
set(CURL_CA_BUNDLE_SET TRUE)
endif()
if("${CURL_CA_PATH}" STREQUAL "")
message(FATAL_ERROR "Invalid value of CURL_CA_PATH. Use 'none', 'auto' or directory path.")
elseif("${CURL_CA_PATH}" STREQUAL "none")
unset(CURL_CA_PATH CACHE)
elseif("${CURL_CA_PATH}" STREQUAL "auto")
unset(CURL_CA_PATH CACHE)
if(NOT USE_NSS)
set(CURL_CA_PATH_AUTODETECT TRUE)
endif()
else()
set(CURL_CA_PATH_SET TRUE)
endif()
if(CURL_CA_BUNDLE_SET AND CURL_CA_PATH_AUTODETECT)
# Skip autodetection of unset CA path because CA bundle is set explicitly
elseif(CURL_CA_PATH_SET AND CURL_CA_BUNDLE_AUTODETECT)
# Skip autodetection of unset CA bundle because CA path is set explicitly
elseif(CURL_CA_PATH_AUTODETECT OR CURL_CA_BUNDLE_AUTODETECT)
# first try autodetecting a CA bundle, then a CA path
if(CURL_CA_BUNDLE_AUTODETECT)
set(SEARCH_CA_BUNDLE_PATHS
/etc/ssl/certs/ca-certificates.crt
/etc/pki/tls/certs/ca-bundle.crt
/usr/share/ssl/certs/ca-bundle.crt
/usr/local/share/certs/ca-root-nss.crt
/etc/ssl/cert.pem)
foreach(SEARCH_CA_BUNDLE_PATH ${SEARCH_CA_BUNDLE_PATHS})
if(EXISTS "${SEARCH_CA_BUNDLE_PATH}")
message(STATUS "Found CA bundle: ${SEARCH_CA_BUNDLE_PATH}")
set(CURL_CA_BUNDLE "${SEARCH_CA_BUNDLE_PATH}" CACHE STRING
"Path to the CA bundle. Set 'none' to disable or 'auto' for auto-detection. Defaults to 'auto'.")
set(CURL_CA_BUNDLE_SET TRUE CACHE BOOL "Path to the CA bundle has been set")
break()
endif()
endforeach()
endif()
if(CURL_CA_PATH_AUTODETECT AND (NOT CURL_CA_PATH_SET))
if(EXISTS "/etc/ssl/certs")
set(CURL_CA_PATH "/etc/ssl/certs" CACHE STRING
"Location of default CA path. Set 'none' to disable or 'auto' for auto-detection. Defaults to 'auto'.")
set(CURL_CA_PATH_SET TRUE CACHE BOOL "Path to the CA bundle has been set")
endif()
endif()
endif()
if(CURL_CA_PATH_SET AND NOT USE_OPENSSL AND NOT USE_MBEDTLS)
message(STATUS
"CA path only supported by OpenSSL, GnuTLS or mbed TLS. "
"Set CURL_CA_PATH=none or enable one of those TLS backends.")
endif()
endif()
# Check for header files
if(NOT UNIX)
check_include_file_concat("windows.h" HAVE_WINDOWS_H)
check_include_file_concat("winsock.h" HAVE_WINSOCK_H)
check_include_file_concat("ws2tcpip.h" HAVE_WS2TCPIP_H)
check_include_file_concat("winsock2.h" HAVE_WINSOCK2_H)
check_include_file_concat("wincrypt.h" HAVE_WINCRYPT_H)
else()
set(HAVE_WINDOWS_H 0)
set(HAVE_WINSOCK_H 0)
set(HAVE_WS2TCPIP_H 0)
set(HAVE_WINSOCK2_H 0)
endif()
check_include_file_concat("stdio.h" HAVE_STDIO_H)
check_include_file_concat("inttypes.h" HAVE_INTTYPES_H)
check_include_file_concat("sys/filio.h" HAVE_SYS_FILIO_H)
check_include_file_concat("sys/ioctl.h" HAVE_SYS_IOCTL_H)
check_include_file_concat("sys/param.h" HAVE_SYS_PARAM_H)
check_include_file_concat("sys/poll.h" HAVE_SYS_POLL_H)
check_include_file_concat("sys/resource.h" HAVE_SYS_RESOURCE_H)
check_include_file_concat("sys/select.h" HAVE_SYS_SELECT_H)
check_include_file_concat("sys/socket.h" HAVE_SYS_SOCKET_H)
check_include_file_concat("sys/sockio.h" HAVE_SYS_SOCKIO_H)
check_include_file_concat("sys/stat.h" HAVE_SYS_STAT_H)
check_include_file_concat("sys/time.h" HAVE_SYS_TIME_H)
check_include_file_concat("sys/types.h" HAVE_SYS_TYPES_H)
check_include_file_concat("sys/uio.h" HAVE_SYS_UIO_H)
check_include_file_concat("sys/un.h" HAVE_SYS_UN_H)
check_include_file_concat("sys/utime.h" HAVE_SYS_UTIME_H)
check_include_file_concat("sys/xattr.h" HAVE_SYS_XATTR_H)
check_include_file_concat("alloca.h" HAVE_ALLOCA_H)
check_include_file_concat("arpa/inet.h" HAVE_ARPA_INET_H)
check_include_file_concat("arpa/tftp.h" HAVE_ARPA_TFTP_H)
check_include_file_concat("assert.h" HAVE_ASSERT_H)
check_include_file_concat("errno.h" HAVE_ERRNO_H)
check_include_file_concat("fcntl.h" HAVE_FCNTL_H)
check_include_file_concat("idn2.h" HAVE_IDN2_H)
check_include_file_concat("ifaddrs.h" HAVE_IFADDRS_H)
check_include_file_concat("io.h" HAVE_IO_H)
check_include_file_concat("krb.h" HAVE_KRB_H)
check_include_file_concat("libgen.h" HAVE_LIBGEN_H)
check_include_file_concat("locale.h" HAVE_LOCALE_H)
check_include_file_concat("net/if.h" HAVE_NET_IF_H)
check_include_file_concat("netdb.h" HAVE_NETDB_H)
check_include_file_concat("netinet/in.h" HAVE_NETINET_IN_H)
check_include_file_concat("netinet/tcp.h" HAVE_NETINET_TCP_H)
check_include_file("linux/tcp.h" HAVE_LINUX_TCP_H)
check_include_file_concat("pem.h" HAVE_PEM_H)
check_include_file_concat("poll.h" HAVE_POLL_H)
check_include_file_concat("pwd.h" HAVE_PWD_H)
check_include_file_concat("setjmp.h" HAVE_SETJMP_H)
check_include_file_concat("signal.h" HAVE_SIGNAL_H)
check_include_file_concat("ssl.h" HAVE_SSL_H)
check_include_file_concat("stdbool.h" HAVE_STDBOOL_H)
check_include_file_concat("stdint.h" HAVE_STDINT_H)
check_include_file_concat("stdio.h" HAVE_STDIO_H)
check_include_file_concat("stdlib.h" HAVE_STDLIB_H)
check_include_file_concat("string.h" HAVE_STRING_H)
check_include_file_concat("strings.h" HAVE_STRINGS_H)
check_include_file_concat("stropts.h" HAVE_STROPTS_H)
check_include_file_concat("termio.h" HAVE_TERMIO_H)
check_include_file_concat("termios.h" HAVE_TERMIOS_H)
check_include_file_concat("time.h" HAVE_TIME_H)
check_include_file_concat("unistd.h" HAVE_UNISTD_H)
check_include_file_concat("utime.h" HAVE_UTIME_H)
check_include_file_concat("x509.h" HAVE_X509_H)
check_include_file_concat("process.h" HAVE_PROCESS_H)
check_include_file_concat("stddef.h" HAVE_STDDEF_H)
check_include_file_concat("dlfcn.h" HAVE_DLFCN_H)
check_include_file_concat("malloc.h" HAVE_MALLOC_H)
check_include_file_concat("memory.h" HAVE_MEMORY_H)
check_include_file_concat("netinet/if_ether.h" HAVE_NETINET_IF_ETHER_H)
check_include_file_concat("stdint.h" HAVE_STDINT_H)
check_include_file_concat("sockio.h" HAVE_SOCKIO_H)
check_include_file_concat("sys/utsname.h" HAVE_SYS_UTSNAME_H)
check_type_size(size_t SIZEOF_SIZE_T)
check_type_size(ssize_t SIZEOF_SSIZE_T)
check_type_size("time_t" SIZEOF_TIME_T)
find_file(RANDOM_FILE urandom /dev)
mark_as_advanced(RANDOM_FILE)
# Check for some functions that are used
if(HAVE_LIBWS2_32)
set(CMAKE_REQUIRED_LIBRARIES ws2_32)
elseif(HAVE_LIBSOCKET)
set(CMAKE_REQUIRED_LIBRARIES socket)
elseif(HAVE_LIBNETWORK)
set(CMAKE_REQUIRED_LIBRARIES network)
endif()
check_symbol_exists(basename "${CURL_INCLUDES}" HAVE_BASENAME)
check_symbol_exists(socket "${CURL_INCLUDES}" HAVE_SOCKET)
check_symbol_exists(select "${CURL_INCLUDES}" HAVE_SELECT)
check_symbol_exists(poll "${CURL_INCLUDES}" HAVE_POLL)
check_symbol_exists(strdup "${CURL_INCLUDES}" HAVE_STRDUP)
check_symbol_exists(strstr "${CURL_INCLUDES}" HAVE_STRSTR)
check_symbol_exists(strtok_r "${CURL_INCLUDES}" HAVE_STRTOK_R)
check_symbol_exists(strftime "${CURL_INCLUDES}" HAVE_STRFTIME)
check_symbol_exists(uname "${CURL_INCLUDES}" HAVE_UNAME)
check_symbol_exists(strcasecmp "${CURL_INCLUDES}" HAVE_STRCASECMP)
check_symbol_exists(stricmp "${CURL_INCLUDES}" HAVE_STRICMP)
check_symbol_exists(strcmpi "${CURL_INCLUDES}" HAVE_STRCMPI)
check_symbol_exists(strncmpi "${CURL_INCLUDES}" HAVE_STRNCMPI)
check_symbol_exists(alarm "${CURL_INCLUDES}" HAVE_ALARM)
if(NOT HAVE_STRNCMPI)
set(HAVE_STRCMPI)
endif()
check_symbol_exists(getppid "${CURL_INCLUDES}" HAVE_GETPPID)
check_symbol_exists(utimes "${CURL_INCLUDES}" HAVE_UTIMES)
check_symbol_exists(gettimeofday "${CURL_INCLUDES}" HAVE_GETTIMEOFDAY)
check_symbol_exists(inet_addr "${CURL_INCLUDES}" HAVE_INET_ADDR)
check_symbol_exists(closesocket "${CURL_INCLUDES}" HAVE_CLOSESOCKET)
check_symbol_exists(sigsetjmp "${CURL_INCLUDES}" HAVE_SIGSETJMP)
check_symbol_exists(getpass_r "${CURL_INCLUDES}" HAVE_GETPASS_R)
check_symbol_exists(getpwuid "${CURL_INCLUDES}" HAVE_GETPWUID)
check_symbol_exists(getpwuid_r "${CURL_INCLUDES}" HAVE_GETPWUID_R)
check_symbol_exists(geteuid "${CURL_INCLUDES}" HAVE_GETEUID)
check_symbol_exists(usleep "${CURL_INCLUDES}" HAVE_USLEEP)
check_symbol_exists(utime "${CURL_INCLUDES}" HAVE_UTIME)
check_symbol_exists(gmtime_r "${CURL_INCLUDES}" HAVE_GMTIME_R)
check_symbol_exists(localtime_r "${CURL_INCLUDES}" HAVE_LOCALTIME_R)
check_symbol_exists(gethostbyname "${CURL_INCLUDES}" HAVE_GETHOSTBYNAME)
check_symbol_exists(gethostbyname_r "${CURL_INCLUDES}" HAVE_GETHOSTBYNAME_R)
check_symbol_exists(signal "${CURL_INCLUDES}" HAVE_SIGNAL_FUNC)
check_symbol_exists(SIGALRM "${CURL_INCLUDES}" HAVE_SIGNAL_MACRO)
if(HAVE_SIGNAL_FUNC AND HAVE_SIGNAL_MACRO)
set(HAVE_SIGNAL 1)
endif()
check_symbol_exists(uname "${CURL_INCLUDES}" HAVE_UNAME)
check_symbol_exists(strtoll "${CURL_INCLUDES}" HAVE_STRTOLL)
check_symbol_exists(_strtoi64 "${CURL_INCLUDES}" HAVE__STRTOI64)
check_symbol_exists(strerror_r "${CURL_INCLUDES}" HAVE_STRERROR_R)
check_symbol_exists(siginterrupt "${CURL_INCLUDES}" HAVE_SIGINTERRUPT)
check_symbol_exists(getaddrinfo "${CURL_INCLUDES}" HAVE_GETADDRINFO)
check_symbol_exists(freeaddrinfo "${CURL_INCLUDES}" HAVE_FREEADDRINFO)
check_symbol_exists(pipe "${CURL_INCLUDES}" HAVE_PIPE)
check_symbol_exists(ftruncate "${CURL_INCLUDES}" HAVE_FTRUNCATE)
check_symbol_exists(getprotobyname "${CURL_INCLUDES}" HAVE_GETPROTOBYNAME)
check_symbol_exists(getpeername "${CURL_INCLUDES}" HAVE_GETPEERNAME)
check_symbol_exists(getsockname "${CURL_INCLUDES}" HAVE_GETSOCKNAME)
check_symbol_exists(if_nametoindex "${CURL_INCLUDES}" HAVE_IF_NAMETOINDEX)
check_symbol_exists(getrlimit "${CURL_INCLUDES}" HAVE_GETRLIMIT)
check_symbol_exists(setlocale "${CURL_INCLUDES}" HAVE_SETLOCALE)
check_symbol_exists(setmode "${CURL_INCLUDES}" HAVE_SETMODE)
check_symbol_exists(setrlimit "${CURL_INCLUDES}" HAVE_SETRLIMIT)
check_symbol_exists(fcntl "${CURL_INCLUDES}" HAVE_FCNTL)
check_symbol_exists(ioctl "${CURL_INCLUDES}" HAVE_IOCTL)
check_symbol_exists(setsockopt "${CURL_INCLUDES}" HAVE_SETSOCKOPT)
check_function_exists(mach_absolute_time HAVE_MACH_ABSOLUTE_TIME)
check_symbol_exists(inet_pton "${CURL_INCLUDES}" HAVE_INET_PTON)
check_symbol_exists(fsetxattr "${CURL_INCLUDES}" HAVE_FSETXATTR)
if(HAVE_FSETXATTR)
foreach(CURL_TEST HAVE_FSETXATTR_5 HAVE_FSETXATTR_6)
curl_internal_test(${CURL_TEST})
endforeach()
endif()
set(CMAKE_EXTRA_INCLUDE_FILES "sys/socket.h")
check_type_size("sa_family_t" SIZEOF_SA_FAMILY_T)
set(HAVE_SA_FAMILY_T ${HAVE_SIZEOF_SA_FAMILY_T})
set(CMAKE_EXTRA_INCLUDE_FILES "")
set(CMAKE_EXTRA_INCLUDE_FILES "ws2def.h")
check_type_size("ADDRESS_FAMILY" SIZEOF_ADDRESS_FAMILY)
set(HAVE_ADDRESS_FAMILY ${HAVE_SIZEOF_ADDRESS_FAMILY})
set(CMAKE_EXTRA_INCLUDE_FILES "")
# sigaction and sigsetjmp are special. Use special mechanism for
# detecting those, but only if previous attempt failed.
if(HAVE_SIGNAL_H)
check_symbol_exists(sigaction "signal.h" HAVE_SIGACTION)
endif()
if(NOT HAVE_SIGSETJMP)
if(HAVE_SETJMP_H)
check_symbol_exists(sigsetjmp "setjmp.h" HAVE_MACRO_SIGSETJMP)
if(HAVE_MACRO_SIGSETJMP)
set(HAVE_SIGSETJMP 1)
endif()
endif()
endif()
# If there is no stricmp(), do not allow LDAP to parse URLs
if(NOT HAVE_STRICMP)
set(HAVE_LDAP_URL_PARSE 1)
endif()
# Do curl specific tests
foreach(CURL_TEST
HAVE_FCNTL_O_NONBLOCK
HAVE_IOCTLSOCKET
HAVE_IOCTLSOCKET_CAMEL
HAVE_IOCTLSOCKET_CAMEL_FIONBIO
HAVE_IOCTLSOCKET_FIONBIO
HAVE_IOCTL_FIONBIO
HAVE_IOCTL_SIOCGIFADDR
HAVE_SETSOCKOPT_SO_NONBLOCK
HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
TIME_WITH_SYS_TIME
HAVE_O_NONBLOCK
HAVE_GETHOSTBYNAME_R_3
HAVE_GETHOSTBYNAME_R_5
HAVE_GETHOSTBYNAME_R_6
HAVE_GETHOSTBYNAME_R_3_REENTRANT
HAVE_GETHOSTBYNAME_R_5_REENTRANT
HAVE_GETHOSTBYNAME_R_6_REENTRANT
HAVE_IN_ADDR_T
HAVE_BOOL_T
STDC_HEADERS
HAVE_GETADDRINFO
HAVE_FILE_OFFSET_BITS
HAVE_VARIADIC_MACROS_C99
HAVE_VARIADIC_MACROS_GCC
)
curl_internal_test(${CURL_TEST})
endforeach()
if(HAVE_FILE_OFFSET_BITS)
set(_FILE_OFFSET_BITS 64)
set(CMAKE_REQUIRED_FLAGS "-D_FILE_OFFSET_BITS=64")
endif()
check_type_size("off_t" SIZEOF_OFF_T)
# include this header to get the type
set(CMAKE_REQUIRED_INCLUDES "${CURL_SOURCE_DIR}/include")
set(CMAKE_EXTRA_INCLUDE_FILES "curl/system.h")
check_type_size("curl_off_t" SIZEOF_CURL_OFF_T)
set(CMAKE_EXTRA_INCLUDE_FILES "")
set(CMAKE_REQUIRED_FLAGS)
foreach(CURL_TEST
HAVE_GLIBC_STRERROR_R
HAVE_POSIX_STRERROR_R
)
curl_internal_test(${CURL_TEST})
endforeach()
# Check for reentrant
foreach(CURL_TEST
HAVE_GETHOSTBYNAME_R_3
HAVE_GETHOSTBYNAME_R_5
HAVE_GETHOSTBYNAME_R_6)
if(NOT ${CURL_TEST})
if(${CURL_TEST}_REENTRANT)
set(NEED_REENTRANT 1)
endif()
endif()
endforeach()
if(NEED_REENTRANT)
foreach(CURL_TEST
HAVE_GETHOSTBYNAME_R_3
HAVE_GETHOSTBYNAME_R_5
HAVE_GETHOSTBYNAME_R_6)
set(${CURL_TEST} 0)
if(${CURL_TEST}_REENTRANT)
set(${CURL_TEST} 1)
endif()
endforeach()
endif()
# Check clock_gettime(CLOCK_MONOTONIC, x) support
curl_internal_test(HAVE_CLOCK_GETTIME_MONOTONIC)
# Check compiler support of __builtin_available()
curl_internal_test(HAVE_BUILTIN_AVAILABLE)
# Some other minor tests
if(NOT HAVE_IN_ADDR_T)
set(in_addr_t "unsigned long")
endif()
# Fix libz / zlib.h
if(NOT CURL_SPECIAL_LIBZ)
if(NOT HAVE_LIBZ)
set(HAVE_ZLIB_H 0)
endif()
if(NOT HAVE_ZLIB_H)
set(HAVE_LIBZ 0)
endif()
endif()
# Check for nonblocking
set(HAVE_DISABLED_NONBLOCKING 1)
if(HAVE_FIONBIO OR
HAVE_IOCTLSOCKET OR
HAVE_IOCTLSOCKET_CASE OR
HAVE_O_NONBLOCK)
set(HAVE_DISABLED_NONBLOCKING)
endif()
if(CMAKE_COMPILER_IS_GNUCC AND APPLE)
include(CheckCCompilerFlag)
check_c_compiler_flag(-Wno-long-double HAVE_C_FLAG_Wno_long_double)
if(HAVE_C_FLAG_Wno_long_double)
# The Mac version of GCC warns about use of long double. Disable it.
get_source_file_property(MPRINTF_COMPILE_FLAGS mprintf.c COMPILE_FLAGS)
if(MPRINTF_COMPILE_FLAGS)
set(MPRINTF_COMPILE_FLAGS "${MPRINTF_COMPILE_FLAGS} -Wno-long-double")
else()
set(MPRINTF_COMPILE_FLAGS "-Wno-long-double")
endif()
set_source_files_properties(mprintf.c PROPERTIES
COMPILE_FLAGS ${MPRINTF_COMPILE_FLAGS})
endif()
endif()
# TODO test which of these headers are required
if(WIN32)
set(CURL_PULL_WS2TCPIP_H ${HAVE_WS2TCPIP_H})
else()
set(CURL_PULL_SYS_TYPES_H ${HAVE_SYS_TYPES_H})
set(CURL_PULL_SYS_SOCKET_H ${HAVE_SYS_SOCKET_H})
set(CURL_PULL_SYS_POLL_H ${HAVE_SYS_POLL_H})
endif()
set(CURL_PULL_STDINT_H ${HAVE_STDINT_H})
set(CURL_PULL_INTTYPES_H ${HAVE_INTTYPES_H})
include(CMake/OtherTests.cmake)
add_definitions(-DHAVE_CONFIG_H)
# For Windows, all compilers used by CMake should support large files
if(WIN32)
set(USE_WIN32_LARGE_FILES ON)
# Use the manifest embedded in the Windows Resource
set(CMAKE_RC_FLAGS "${CMAKE_RC_FLAGS} -DCURL_EMBED_MANIFEST")
# Check if crypto functions in wincrypt.h are actually available
if(HAVE_WINCRYPT_H)
check_symbol_exists(CryptAcquireContext "${CURL_INCLUDES}" USE_WINCRYPT)
endif()
if(USE_WINCRYPT)
set(USE_WIN32_CRYPTO ON)
endif()
# Link required libraries for USE_WIN32_CRYPTO or USE_SCHANNEL
if(USE_WIN32_CRYPTO OR USE_SCHANNEL)
list(APPEND CURL_LIBS "advapi32" "crypt32")
endif()
endif()
if(MSVC)
# Disable default manifest added by CMake
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /MANIFEST:NO")
add_definitions(-D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE)
if(CMAKE_C_FLAGS MATCHES "/W[0-4]")
string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
else()
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W4")
endif()
# Use multithreaded compilation on VS 2008+
if(MSVC_VERSION GREATER_EQUAL 1500)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /MP")
endif()
endif()
if(CURL_WERROR)
if(MSVC_VERSION)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /WX")
else()
# this assumes clang or gcc style options
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Werror")
endif()
endif()
if(CURL_LTO)
if(CMAKE_VERSION VERSION_LESS 3.9)
message(FATAL_ERROR "Requested LTO but your cmake version ${CMAKE_VERSION} is to old. You need at least 3.9")
endif()
cmake_policy(SET CMP0069 NEW)
include(CheckIPOSupported)
check_ipo_supported(RESULT CURL_HAS_LTO OUTPUT CURL_LTO_ERROR LANGUAGES C)
if(CURL_HAS_LTO)
message(STATUS "LTO supported and enabled")
else()
message(FATAL_ERROR "LTO was requested - but compiler doesn't support it\n${CURL_LTO_ERROR}")
endif()
endif()
# Ugly (but functional) way to include "Makefile.inc" by transforming it (= regenerate it).
function(transform_makefile_inc INPUT_FILE OUTPUT_FILE)
file(READ ${INPUT_FILE} MAKEFILE_INC_TEXT)
string(REPLACE "$(top_srcdir)" "\${CURL_SOURCE_DIR}" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
string(REPLACE "$(top_builddir)" "\${CURL_BINARY_DIR}" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
string(REGEX REPLACE "\\\\\n" "!π!α!" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
string(REGEX REPLACE "([a-zA-Z_][a-zA-Z0-9_]*)[\t ]*=[\t ]*([^\n]*)" "SET(\\1 \\2)" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
string(REPLACE "!π!α!" "\n" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT})
string(REGEX REPLACE "\\$\\(([a-zA-Z_][a-zA-Z0-9_]*)\\)" "\${\\1}" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT}) # Replace $() with ${}
string(REGEX REPLACE "@([a-zA-Z_][a-zA-Z0-9_]*)@" "\${\\1}" MAKEFILE_INC_TEXT ${MAKEFILE_INC_TEXT}) # Replace @@ with ${}, even if that may not be read by CMake scripts.
file(WRITE ${OUTPUT_FILE} ${MAKEFILE_INC_TEXT})
set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS "${INPUT_FILE}")
endfunction()
if(0) # This code not needed for building within CMake.
include(GNUInstallDirs)
set(CURL_INSTALL_CMAKE_DIR ${CMAKE_INSTALL_LIBDIR}/cmake/${PROJECT_NAME})
set(TARGETS_EXPORT_NAME "${PROJECT_NAME}Targets")
set(generated_dir "${CMAKE_CURRENT_BINARY_DIR}/generated")
set(project_config "${generated_dir}/${PROJECT_NAME}Config.cmake")
set(version_config "${generated_dir}/${PROJECT_NAME}ConfigVersion.cmake")
endif()
if(USE_MANUAL)
add_subdirectory(docs)
endif()
add_subdirectory(lib)
if(BUILD_CURL_EXE)
add_subdirectory(src)
endif()
#-----------------------------------------------------------------------------
# CMake-specific curl code.
add_executable(curltest curltest.c)
target_link_libraries(curltest cmcurl)
if(BUILD_TESTING AND CMAKE_CURL_TEST_URL)
add_test(curl curltest ${CMAKE_CURL_TEST_URL})
endif()
install(FILES COPYING DESTINATION ${CMAKE_DOC_DIR}/cmcurl)
#-----------------------------------------------------------------------------
if(0) # This code not needed for building within CMake.
cmake_dependent_option(BUILD_TESTING "Build tests"
ON "PERL_FOUND;NOT CURL_DISABLE_TESTS"
OFF)
if(BUILD_TESTING)
add_subdirectory(tests)
endif()
# Helper to populate a list (_items) with a label when conditions (the remaining
# args) are satisfied
macro(_add_if label)
# needs to be a macro to allow this indirection
if(${ARGN})
set(_items ${_items} "${label}")
endif()
endmacro()
# NTLM support requires crypto function adaptions from various SSL libs
# TODO alternative SSL libs tests for SSP1, GNUTLS, NSS
if(NOT (CURL_DISABLE_CRYPTO_AUTH OR CURL_DISABLE_NTLM) AND
(USE_OPENSSL OR USE_MBEDTLS OR USE_DARWINSSL OR USE_WIN32_CRYPTO))
set(use_curl_ntlm_core ON)
endif()
# Clear list and try to detect available features
set(_items)
_add_if("SSL" SSL_ENABLED)
_add_if("IPv6" ENABLE_IPV6)
_add_if("unixsockets" USE_UNIX_SOCKETS)
_add_if("libz" HAVE_LIBZ)
_add_if("brotli" HAVE_BROTLI)
_add_if("zstd" HAVE_ZSTD)
_add_if("AsynchDNS" USE_ARES OR USE_THREADS_POSIX OR USE_THREADS_WIN32)
_add_if("IDN" HAVE_LIBIDN2 OR USE_WIN32_IDN)
_add_if("Largefile" (SIZEOF_CURL_OFF_T GREATER 4) AND
((SIZEOF_OFF_T GREATER 4) OR USE_WIN32_LARGE_FILES))
# TODO SSP1 (Schannel) check is missing
_add_if("SSPI" USE_WINDOWS_SSPI)
_add_if("GSS-API" HAVE_GSSAPI)
_add_if("alt-svc" NOT CURL_DISABLE_ALTSVC)
_add_if("HSTS" NOT CURL_DISABLE_HSTS)
# TODO SSP1 missing for SPNEGO
_add_if("SPNEGO" NOT CURL_DISABLE_CRYPTO_AUTH AND
(HAVE_GSSAPI OR USE_WINDOWS_SSPI))
_add_if("Kerberos" NOT CURL_DISABLE_CRYPTO_AUTH AND
(HAVE_GSSAPI OR USE_WINDOWS_SSPI))
# NTLM support requires crypto function adaptions from various SSL libs
# TODO alternative SSL libs tests for SSP1, GNUTLS, NSS
_add_if("NTLM" NOT (CURL_DISABLE_CRYPTO_AUTH OR CURL_DISABLE_NTLM) AND
(use_curl_ntlm_core OR USE_WINDOWS_SSPI))
# TODO missing option (autoconf: --enable-ntlm-wb)
_add_if("NTLM_WB" NOT (CURL_DISABLE_CRYPTO_AUTH OR CURL_DISABLE_NTLM) AND
(use_curl_ntlm_core OR USE_WINDOWS_SSPI) AND
NOT CURL_DISABLE_HTTP AND NTLM_WB_ENABLED)
# TODO missing option (--enable-tls-srp), depends on GNUTLS_SRP/OPENSSL_SRP
_add_if("TLS-SRP" USE_TLS_SRP)
# TODO option --with-nghttp2 tests for nghttp2 lib and nghttp2/nghttp2.h header
_add_if("HTTP2" USE_NGHTTP2)
_add_if("HTTP3" USE_NGTCP2 OR USE_QUICHE)
_add_if("MultiSSL" CURL_WITH_MULTI_SSL)
_add_if("HTTPS-proxy" SSL_ENABLED AND (USE_OPENSSL OR USE_GNUTLS OR USE_NSS))
_add_if("unicode" ENABLE_UNICODE)
string(REPLACE ";" " " SUPPORT_FEATURES "${_items}")
message(STATUS "Enabled features: ${SUPPORT_FEATURES}")
# Clear list and try to detect available protocols
set(_items)
_add_if("HTTP" NOT CURL_DISABLE_HTTP)
_add_if("HTTPS" NOT CURL_DISABLE_HTTP AND SSL_ENABLED)
_add_if("FTP" NOT CURL_DISABLE_FTP)
_add_if("FTPS" NOT CURL_DISABLE_FTP AND SSL_ENABLED)
_add_if("FILE" NOT CURL_DISABLE_FILE)
_add_if("TELNET" NOT CURL_DISABLE_TELNET)
_add_if("LDAP" NOT CURL_DISABLE_LDAP)
# CURL_DISABLE_LDAP implies CURL_DISABLE_LDAPS
# TODO check HAVE_LDAP_SSL (in autoconf this is enabled with --enable-ldaps)
_add_if("LDAPS" NOT CURL_DISABLE_LDAPS AND
((USE_OPENLDAP AND SSL_ENABLED) OR
(NOT USE_OPENLDAP AND HAVE_LDAP_SSL)))
_add_if("DICT" NOT CURL_DISABLE_DICT)
_add_if("TFTP" NOT CURL_DISABLE_TFTP)
_add_if("GOPHER" NOT CURL_DISABLE_GOPHER)
_add_if("GOPHERS" NOT CURL_DISABLE_GOPHER AND SSL_ENABLED)
_add_if("POP3" NOT CURL_DISABLE_POP3)
_add_if("POP3S" NOT CURL_DISABLE_POP3 AND SSL_ENABLED)
_add_if("IMAP" NOT CURL_DISABLE_IMAP)
_add_if("IMAPS" NOT CURL_DISABLE_IMAP AND SSL_ENABLED)
_add_if("SMB" NOT CURL_DISABLE_SMB AND
use_curl_ntlm_core AND (SIZEOF_CURL_OFF_T GREATER 4))
_add_if("SMBS" NOT CURL_DISABLE_SMB AND SSL_ENABLED AND
use_curl_ntlm_core AND (SIZEOF_CURL_OFF_T GREATER 4))
_add_if("SMTP" NOT CURL_DISABLE_SMTP)
_add_if("SMTPS" NOT CURL_DISABLE_SMTP AND SSL_ENABLED)
_add_if("SCP" USE_LIBSSH2 OR USE_LIBSSH)
_add_if("SFTP" USE_LIBSSH2 OR USE_LIBSSH)
_add_if("RTSP" NOT CURL_DISABLE_RTSP)
_add_if("RTMP" USE_LIBRTMP)
_add_if("MQTT" NOT CURL_DISABLE_MQTT)
if(_items)
list(SORT _items)
endif()
string(REPLACE ";" " " SUPPORT_PROTOCOLS "${_items}")
message(STATUS "Enabled protocols: ${SUPPORT_PROTOCOLS}")
# Clear list and collect SSL backends
set(_items)
_add_if("Schannel" SSL_ENABLED AND USE_SCHANNEL)
_add_if("OpenSSL" SSL_ENABLED AND USE_OPENSSL)
_add_if("Secure Transport" SSL_ENABLED AND USE_SECTRANSP)
_add_if("mbedTLS" SSL_ENABLED AND USE_MBEDTLS)
_add_if("BearSSL" SSL_ENABLED AND USE_BEARSSL)
_add_if("NSS" SSL_ENABLED AND USE_NSS)
_add_if("wolfSSL" SSL_ENABLED AND USE_WOLFSSL)
if(_items)
list(SORT _items)
endif()
string(REPLACE ";" " " SSL_BACKENDS "${_items}")
message(STATUS "Enabled SSL backends: ${SSL_BACKENDS}")
# curl-config needs the following options to be set.
set(CC "${CMAKE_C_COMPILER}")
# TODO probably put a -D... options here?
set(CONFIGURE_OPTIONS "")
# TODO when to set "-DCURL_STATICLIB" for CPPFLAG_CURL_STATICLIB?
set(CPPFLAG_CURL_STATICLIB "")
set(CURLVERSION "${CURL_VERSION}")
set(exec_prefix "\${prefix}")
set(includedir "\${prefix}/include")
set(LDFLAGS "${CMAKE_SHARED_LINKER_FLAGS}")
set(LIBCURL_LIBS "")
set(libdir "${CMAKE_INSTALL_PREFIX}/lib")
foreach(_lib ${CMAKE_C_IMPLICIT_LINK_LIBRARIES} ${CURL_LIBS})
if(TARGET "${_lib}")
set(_libname "${_lib}")
get_target_property(_libtype "${_libname}" TYPE)
if(_libtype STREQUAL INTERFACE_LIBRARY)
# Interface libraries can occur when an external project embeds curl and
# defined targets such as ZLIB::ZLIB by themselves. Ignore these as
# reading the LOCATION property will error out. Assume the user won't need
# this information in the .pc file.
continue()
endif()
get_target_property(_lib "${_libname}" LOCATION)
if(NOT _lib)
message(WARNING "Bad lib in library list: ${_libname}")
continue()
endif()
endif()
if(_lib MATCHES ".*/.*" OR _lib MATCHES "^-")
set(LIBCURL_LIBS "${LIBCURL_LIBS} ${_lib}")
else()
set(LIBCURL_LIBS "${LIBCURL_LIBS} -l${_lib}")
endif()
endforeach()
if(BUILD_SHARED_LIBS)
set(ENABLE_SHARED "yes")
set(ENABLE_STATIC "no")
set(LIBCURL_NO_SHARED "")
else()
set(ENABLE_SHARED "no")
set(ENABLE_STATIC "yes")
set(LIBCURL_NO_SHARED "${LIBCURL_LIBS}")
endif()
# "a" (Linux) or "lib" (Windows)
string(REPLACE "." "" libext "${CMAKE_STATIC_LIBRARY_SUFFIX}")
set(prefix "${CMAKE_INSTALL_PREFIX}")
# Set this to "yes" to append all libraries on which -lcurl is dependent
set(REQUIRE_LIB_DEPS "no")
# SUPPORT_FEATURES
# SUPPORT_PROTOCOLS
set(VERSIONNUM "${CURL_VERSION_NUM}")
# Finally generate a "curl-config" matching this config
# Use:
# * ENABLE_SHARED
# * ENABLE_STATIC
configure_file("${CURL_SOURCE_DIR}/curl-config.in"
"${CURL_BINARY_DIR}/curl-config" @ONLY)
install(FILES "${CURL_BINARY_DIR}/curl-config"
DESTINATION ${CMAKE_INSTALL_BINDIR}
PERMISSIONS
OWNER_READ OWNER_WRITE OWNER_EXECUTE
GROUP_READ GROUP_EXECUTE
WORLD_READ WORLD_EXECUTE)
# Finally generate a pkg-config file matching this config
configure_file("${CURL_SOURCE_DIR}/libcurl.pc.in"
"${CURL_BINARY_DIR}/libcurl.pc" @ONLY)
install(FILES "${CURL_BINARY_DIR}/libcurl.pc"
DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig)
# install headers
install(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}/include/curl"
DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}
FILES_MATCHING PATTERN "*.h")
include(CMakePackageConfigHelpers)
write_basic_package_version_file(
"${version_config}"
VERSION ${CURL_VERSION}
COMPATIBILITY SameMajorVersion
)
# Use:
# * TARGETS_EXPORT_NAME
# * PROJECT_NAME
configure_package_config_file(CMake/curl-config.cmake.in
"${project_config}"
INSTALL_DESTINATION ${CURL_INSTALL_CMAKE_DIR}
)
if(CURL_ENABLE_EXPORT_TARGET)
install(
EXPORT "${TARGETS_EXPORT_NAME}"
NAMESPACE "${PROJECT_NAME}::"
DESTINATION ${CURL_INSTALL_CMAKE_DIR}
)
endif()
install(
FILES ${version_config} ${project_config}
DESTINATION ${CURL_INSTALL_CMAKE_DIR}
)
# Workaround for MSVS10 to avoid the Dialog Hell
# FIXME: This could be removed with future version of CMake.
if(MSVC_VERSION EQUAL 1600)
set(CURL_SLN_FILENAME "${CMAKE_CURRENT_BINARY_DIR}/CURL.sln")
if(EXISTS "${CURL_SLN_FILENAME}")
file(APPEND "${CURL_SLN_FILENAME}" "\n# This should be regenerated!\n")
endif()
endif()
if(NOT TARGET uninstall)
configure_file(
${CMAKE_CURRENT_SOURCE_DIR}/CMake/cmake_uninstall.cmake.in
${CMAKE_CURRENT_BINARY_DIR}/CMake/cmake_uninstall.cmake
IMMEDIATE @ONLY)
add_custom_target(uninstall
COMMAND ${CMAKE_COMMAND} -P
${CMAKE_CURRENT_BINARY_DIR}/CMake/cmake_uninstall.cmake)
endif()
endif()