The case is for arch:subarch combo, not just arch alone even if
subarch is empty. Thus currently on adm64/arm64/armhf ubuntu-cpc
builds mbr image is created and then ignored, as the convert to qcow2
hook prefers the uefi image whenever available.
Skipping building these correctly, should speed up the build a little
bit and use slightly less disk space.
shim-signed depends on grub-efi-amd64-signed, which in turn has
alternative depends on either `grub-efi-amd64 | grub-pc`. However to
support booting with either via shim&signed-grub and BIOS, the choice
must be made to install grub-pc, not grub-efi-amd64.
This makes images consistent with Ubuntu Deskop, Live Server, buildd
bootable images; all of which already do install grub-pc and
shim-signed.
LP: #1901906
The CPC build hooks for amd64 incorrectly attempt to install shim-signed
in addition to grub-efi-amd64 and grub-pc. These latter two packages
conflict with each other. Instead shim-signed should install whatever
packages are required.
Additionally, this will ensure that autoremove is run after installing
anything in the CPC build hooks. This is done to avoid shipping images
that include packages that are autoremovable. This will clean-up as
packages are installed and detect any breakage at build time.
virtualbox-guest-utils kernel modules is included in linux-modules
starting in kernel 5.4.0-33 in focal-updates. The vagrant hook also
explicit installed virtualbox-guest-utils. An error occurred with the
version installed from the archives, however, with the inclusion in
linux-modules, there's no need to explicitly install
virtualbox-guest-utils. Removes the code for the explicit install.
Original fix proposed by Stanislav German-Evtushenko (giner)
CPC Ubuntu cloud images default to enabling a serial console connection
via the kernel commandline option `console=ttyS0`. Many clouds support
the serial connection, and utilize it for debugging purposes. Virtualbox
supports the serial connection as well. In Bionic and earlier images,
Vagrant boxes created a serial log file in the directory of the
Vagrantfile by default. However this is not standard behaviour for
Vagrant images, and so it was removed in Eoan onwards.
Starting in Eoan, there were reports of image booting slowdown (1874453
is a single example). After testing, it was determined that the serial
connection starting, without a device attached, was the cause of the
slow down. However, we did not want to revert to the old functionality
of creating a file. Much thanks to <giner> for providing the Ruby syntax
for sending to File::NULL.
This option will not create a local file, however, the default
Vagrantfile configuration is overwritable via a users Vagrantfile. The
original syntax for creating a file local to the users Vagrantfile has
been included as an example.
These introduced a regression for ppc64el and needs more time to bake.
This reverts commits 1deb0c68e8 &
6dbb30f53b.
* "ubuntu-cpc: Fix ppc64el grub console update"
* "ubuntu-cpc: Disable boot splash in all cloud images (LP: #1725358)"
The commit 6dbb30f5 (2.682) which disabled boot splash for all cloud
images introduced an error in the ppc64el hook. This patch corrects the
name of the variable that contains grub console overrides. The error
seen during testing was
'disk-image-ppc64el.binary: line 44: CONSOLES: unbound variable'
and this was due to a typo.
When trying to debug an issue on ARM64 it was reported that it was
quite difficult to debug because of control codes on the console from
the splash.
For cloud image there is a chroot customization the drops 'quiet splash'
but this is only applied to amd64. It hasn't made it into other
architectures because they don't have grub by default in the chroot.
However, when we get into binary hook for the uefi disk image and it's
derivatives grub is installed and this includes architectures that were
skipped in the chroot hook.
This patch changes the cpc-fixes chroot hook to add a cloud-images
grub config with basic overrides, including dropping the boot splash,
for all architectures. For images that never get grub installed this
addition is harmless and small while ensuring that the grub experience
is consistent for images that have grub. The configuration of console
devices as hard-coded remains arch specific.
In v2.672 the default boot behavior of cloud images changed:
- Prior to v2.672, cloud images with the linux-generic kernel attempt
to boot without an initramfs, would fail, and then retry with an
initramfs.
- After v2.672, cloud images with the linux-generic kernel boot with
an initramfs on the first try.
While the behavior is different between the two, they both result in
an instance that has booted with an initramfs. To ensure the changes
in v2.672 do not regress, we need an automated way to check if we are
attempting to boot without an initramfs and failing.
With this change, when we attempt to boot with an initramfs and fail,
initrdless_boot_fallback_triggered is set to non-zero in the grubenv.
This value can be checked after boot by looking in /boot/grub/grubenv
or by using the grub-editenv list command.
I recently pulled initramfs logic out of the base build hook, and
dropped that into the `replace_kernel` function. Any cloud image that
does not leverage the generic virtual kernel was expected to call
`replace_kernel` to pull in a custom kernel. That function will
disable initramfs boot for images that use a custom kernel.
Minimal cloud images on amd64 use the linux-kvm kernel, but the build
hook does not utilize the `replace_kernel` function. Instead, the
kernel flavor is set in `auto/config`. I pulled that logic out of
`auto/config` and am now calling `replace_kernel` in the build hook.
I also moved a call to generate the package list so that it will pick
up the change to the linux-kvm kernel.
Generic cloud images with the linux-generic kernel are not able to
boot without an initramfs. Previously, these images attempted to boot
without an initramfs, would fail, and then retry with an initramfs.
This slows the boot and is confusing behavior.
It was reported and confirmed in LP bug #1875400
(https://bugs.launchpad.net/cloud-images/+bug/1875400) that on the public
KVM cloud image there exists a large list of packages marked for auto-removal.
This should never be the case on a released cloud image.
These packages are marked for auto-removal because in the KVM image binary hook
we removed both initramfs-tools and busybox-initramfs packages. Due to package
dependencies this also removed:
busybox-initramfs* cloud-initramfs-copymods* cloud-initramfs-dyn-netconf*
cryptsetup-initramfs* initramfs-tools* initramfs-tools-core* multipath-tools*
overlayroot* sg3-utils-udev* ubuntu-server*
But it did not remove all the packages that the above list depended on.
This resulted in all those packages being marked for auto-removal because they
were not manually installed nor did they have any manually installed packages
that depended on them.
The removal of initramfs-tools and busybox-initramfs was to avoid the
generation of initramfs in images that should boot initramfsless.
This requirement is obsolete now because the initramfsless boot handling
is now handled via setting GRUB_FORCE_PARTUUID in /etc/default/grub.d/40-force-partuuid.cfg.
In test images I have verified that GRUB_FORCE_PARTUUID is set and that
boot speeds have not regressed.
LP: #1875400
Vagrant images were previously put at 10G, but this was a regression
from Trusty, in which they were 40G. This made it a tough sell for
users to upgrade if they were using a Ubuntu desktop experience.
This change does not impact disk usage as Vagrant with the virtualbox
provider dynamically allocates space with the VMDK. On a test system,
the VMDK took up 1.1G of disk space according to df, and after
creating a 2G file in Vagrant, the VMDK grew to 3.1G.
Therefore, users who are running on a system with little free space will
not see adverse effects if they upgrade to a new vagrant image
The livecd.ubuntu-cpc.ext4 that is present in each build (plus kernel
and initrd) are not renamed from /build/binary/boot/filsystem.ext4
and friends until after the binary hooks are run, so this patch moves
from trying to perform this cleanup in a binary hook. Now the cleanup
will be run at the end of live-build/binary for the ubuntu-cpc project.
In parallel builds where a list of image targets are provided the build
may produce binaries that are not part of the named set of targets but
are created by series dependencies. These implicitly created binaries
may be generated by multiple builds but are unused as our convention for
the ubuntu-cpc project is to only consume binaries from the explicitly
named image targets; this avoid overwriting the same object by multiple
parallel builds.
This patch adds support for a 'provides' keyword for series files. It can
be specified multiple times per series file. The field is used by the
make-hooks script to generate a list of output files created explicitly by
the named image targets. The list is saved to the "explicit_provides"
file in the hooks output directory. In the case of the "all" target
this list would be empty. This list is consumed by the "final.binary"
hook file.
This patch adds support for optional final.binary hooks in hooks.d/base
and/or hooks.d/extra. These final.binary hooks are always included as
the last hook(s) if either exist with the hook in "extra" running last.
The base/final.binary hook includes logic to parse the "explicit_provides"
file generated by the make-hooks script and remove any binary output not
explicitly specified.
Some series files named unnecessary dependencies, specifically
disk-image, to keep output of implicit artifacts consistent between
parallel builds. These unnecessary dependencies are removed in this
patch.
Dimitri John Ledkov
Gauthier Jolly
Łukasz 'sil2100' Zemczak
Joshua Powers
John Chittum
Robert C Jennings
Stanislav German-Evtushenko
Steve Langasek
David Krauser
Balint Reczey
Philip Roche
Pat Viafore
Michael Hudson-Doyle