Imported using git-ubuntu import.
Changelog parent: 184c0e0884
New changelog entries:
* The target for x86 ubuntu-core images is VMs, so create them with
a buffer of free space in order to work if booted in place.
* ubuntu-image now produces a manifest file listing the snap revisions
used; publish this so that it's picked up by launchpad-buildd.
* Change ubuntu-core image builds to use the standard "$PREFIX" naming for
artifacts instead of being gratuitously different; requires a matching
change to ubuntu-cdimage.
Imported using git-ubuntu import.
Changelog parent: f7fcac1602
New changelog entries:
[ Gary Wang ]
* Add the IMAGEFORMAT=none to support generating a single rootfs.
Imported using git-ubuntu import.
Changelog parent: 9f966299f1
New changelog entries:
* Purge initramfs-tools from minimized images.
* Make sure to remove any initramfs that was generated in a minimized
image.
* divert /usr/bin/systemd-detect-virt as part of the grub diversions, so
that the grub kernel postinst hook is operational when we're building
in a container. LP: #1729034.
Imported using git-ubuntu import.
Changelog parent: ed2c2791c8
New changelog entries:
[ Michael Hudson-Doyle ]
* Two last minute server-live fixes:
- Seed the subiquity snap to track the stable channel (LP: #1724410)
- Remove snap.subiquity.started from subiquity's After=/Requires= as it
does not fix the race condition they were intended to address and causes
subiquity to be killed when snapd refreshes subiquity (LP: #1724411)
Imported using git-ubuntu import.
Changelog parent: 95f6bb3dfc
New changelog entries:
* Fix server live image to pull subiquity from the stable channel, not
from edge.
Imported using git-ubuntu import.
Changelog parent: 979261d927
New changelog entries:
* snap.subiquity.started.service must be RemainAfterExit=yes to satisfy
the service dependencies.
Imported using git-ubuntu import.
Changelog parent: 00b23f0f6b
New changelog entries:
* Add the SNAP_REEXEC=0 enviroment to the subiquity service as well.
Imported using git-ubuntu import.
Changelog parent: 5a3ccfef34
New changelog entries:
[ Balint Reczey ]
* Clean up dangling /boot/initrd.img symlink when needed
* Revert ignoring failure of minimized autopkgtest on ppc64el
* Use kvm kernel only on amd64
* Skip installing server task when building minimial images
[ Steve Langasek ]
* export SNAP_REEXEC=0 to our snappy systemd units in the livefs overlay,
to work around apparmor not working reliably against aufs.
Imported using git-ubuntu import.
Changelog parent: 84ef6ff8e3
New changelog entries:
[ Michael Hudson-Doyle ]
* Add snap.subiquity.started.service to subiquity.service's Requires=.
Imported using git-ubuntu import.
Changelog parent: fb1b5e73e3
New changelog entries:
* Now that grub-related diversions have been factored out in 2.466
instead of having bogus root=stuff arg generated in grub.cfg, it is
actually empty. Therefore update the sed command to make the arg in
the root= token optional. This should resolve non-booting livecd cpc
images.
Imported using git-ubuntu import.
Changelog parent: 2ec24bdfce
New changelog entries:
* Add initial support for preinstallation of snaps in images, and
preinstall pulsemixer in the Ubuntu MATE image.
Imported using git-ubuntu import.
Changelog parent: 577646d435
New changelog entries:
* Unminimization information should only go to motd when we are actually
minimized.
Imported using git-ubuntu import.
Changelog parent: b053111651
New changelog entries:
[ Dimitri John Ledkov ]
* Drop obsolete fix-ups of resolv.conf, debootstrap should now result in
correct symlink to resolved without any further fixes.
[ Michael Hudson-Doyle ]
* Have subiquity.service order after on a service defined by the subiquity
snap, which in turn will order after the job that mounts the subiquity
snap. (LP: #1721414)
Imported using git-ubuntu import.
Changelog parent: 8168b7c92a
New changelog entries:
* ubuntu-server: drop hard-coded test key from the subiquity overlay in
favor of the generic-classic assertion from the store.
* move snap assertion handling into the generic build script (and, in
the process, from the subiquity overlay to the base squashfs).
* add ubuntu-mate to the set of projects we add snap model assertions to.
* Factor out grub-related diversions and use them consistently, so we
don't end up with wrong os-probe output in our grub.cfg.
* Fix the force-partuuid handling to create the file under
/etc/default/grub.d/ with a .cfg extension as grub expects; it's unclear
how this ever worked without.
Imported using git-ubuntu import.
Changelog parent: be46ea0ff6
New changelog entries:
* Skip installation of kernel headers for all minimal images
* Use the kvm kernel flavor for minimized cloud image where available,
not virtual.
Imported using git-ubuntu import.
Changelog parent: a02598fe24
New changelog entries:
* Ignore failure of new autopkgtest on ppc64el, where it's not a
regression.
* Use /bin/sh, not /bin/bash, for autopkgtest.
Imported using git-ubuntu import.
Changelog parent: 2da89c90de
New changelog entries:
[ Balint Reczey ]
* Bump needed live-build version which can build images without initrd
* Mention unminimize script in motd
* Warn users that unminimize may fail reinstalling packages
* Use SUBPROJECT=minimized name instead of SUBPROJECT=minimize for
consistency
* Run autopkgtest for SUBPROJECT=minimized
* When SUBPROJECT environment variable is not set assume it to be ""
[ Michael Hudson-Doyle ]
* Fix path to subiquity-loadkeys
Imported using git-ubuntu import.
Changelog parent: 3f5115f8f2
New changelog entries:
* Fix a reference to an undefined variable in a script that's set -u.
* In subiquity, loadkeys to setup Shift+Tab key combination.
Imported using git-ubuntu import.
Changelog parent: 060069bc77
New changelog entries:
[ Steve Langasek ]
* Begin adding support for a project-independent 'minimize' subproject, which
(ironically) omits ubuntu-minimal in favor of using only the minbase
package set.
* Export the subproject into config/chroot and config/binary, so that this
information is available to per-project hooks that need to be
subproject-aware (e.g., to skip steps when SUBPROJECT=minimize)
* Make the 999-cpc-fixes.chroot subproject-aware, so we don't try to
locale-gen
* In a cloud environment, we can rely on the kernel being able to boot the
root filesystem directly, without an initramfs; enable this when building
minimized.
* If we're using SUBPROJECT=minimize, and tzdata is not installed, remove
files that have been left behind. This is a workaround for a bug that
should be fixed in tzdata.
[ Balint Reczey ]
* Mount using --make-rslave to ensure safe unmounts for rbind mounts
* Don't ask for password and GECOS while creating vagrant user
* Drop man pages and most of the documentation from minimized images
/usr/share/doc/*/copyright and changelog.Debian.gz files are still kept
* Add unminimize script for reverting minimization on running system
* Install ubuntu-minimal while unminimizing the system
Imported using git-ubuntu import.
Changelog parent: e4b41272e2
New changelog entries:
[ Steve Langasek ]
* Remove spurious call to 'sync'; we don't need to flush all disk caches
on the system to cleanly unmount a partition.
[ Michael Hudson-Doyle ]
* only show alert (i.e. panic) kernel messages on the console when
subiquity is running
Imported using git-ubuntu import.
Changelog parent: 7fd585146b
New changelog entries:
* Move default netplan config for server-live image to where hook will
pick it up.
Imported using git-ubuntu import.
Changelog parent: 62cc84825d
New changelog entries:
* Enable systemd-networkd by default.
- Usually, netplan's systemd-generator enables systemd-networkd and
systemd-networkd-wait-online on boot. But netplan configuration is not
yet generated at that point by cloud-init. Cloud-init generates in the
network-pre.target and expects the network.target /
network-online.target to work. These are already part of the ongoing
systemd transaction, thus cannot be injected into the boot-sequency by
cloud-init local mode. Therefore make sure cloud images include
networkd in the initial boot transaction.
- src:systemd will shortly not enable networkd unconditionally by
default.
* Drop ifupdown e-n-i configuration files, no longer used.
Imported using git-ubuntu import.
Changelog parent: 3adf9af2a9
New changelog entries:
* Improve teardown_mountpoint to recursively find all submounts and
unmount them, instead of working from a hard-coded list. This makes
the code resilient against other submounts being added later, including
downstream.
* Also nuke the sleep / udevadm settle calls in the process, which should
never be required and slow down the builds.
[ Michael Hudson-Doyle ]
* set a default netplan config of dhcp-on-ethernet for the server live image
Imported using git-ubuntu import.
Changelog parent: efbd6fd1c6
New changelog entries:
* Restore the call to 'umount -R $mountpoint' from umount_partition,
accidentally dropped in previous upload.
Imported using git-ubuntu import.
Changelog parent: 6e53d32cd8
New changelog entries:
[ Steve Langasek ]
* live-build/functions: mount tmpfs on /var/cache/apt and var/lib/apt, so
we don't have to leave empty space in our derivative images for packages
that have been downloaded/installed/removed. This normally isn't
relevant for the installed system, since the root filesystem will
auto-expand in place on the target disk, but lets us ship smaller
images.
* live-build/functions: also call 'apt-get update' after mounting the
blank /var/lib/apt.
* live-build/ubuntu-cpc/hooks/033-disk-image-uefi.binary: call apt-get
update *before* installing packages, not after.
[ Robert C Jennings ]
* live-build/ubuntu-cpc/functions: Add a function, teardown_mountpoint,
to reverse the work done in setup_mountpoint. Lack of this function
has forced users of setup_mountpoint to implement this separately
and the implementations have diverged. (LP: #1716992)
* live-build/ubuntu-cpc/functions: Remove umount_settle function.
The was only used where teardown_mountpoint was lacking.
[ Steve Langasek ]
* Also adjust live-build/ubuntu-server/hooks/032-installer-squashfs.binary
to use teardown_mountpoint.
Imported using git-ubuntu import.
Changelog parent: 70a41fd45c
New changelog entries:
[ Chris Glass ]
* Create vagrant user for vagrant image, per upstream requirements.
[ Colin Watson ]
* Mount and unmount /dev recursively, to cope with setups where there are
interesting bind-mounts under /dev (e.g. loop devices bind-mounted by
LXD). LP: #1716465.
Imported using git-ubuntu import.
Changelog parent: 8eadac557b
New changelog entries:
* Fix a reference to an undefined variable in the ubuntu-cpc hooks,
introduced by the previous upload.
Imported using git-ubuntu import.
Changelog parent: 2003d73b1d
New changelog entries:
[ Steve Langasek ]
* Set a default locale of C.UTF-8 in the cloud images.
[ Mathieu Trudel-Lapierre ]
* Drop special handling of grub modules. Modules should be included in
the signed grub binaries when necessary.
Imported using git-ubuntu import.
Changelog parent: 5eb31aa1c2
New changelog entries:
[ Balint Reczey ]
* Use VMDKstream in a more future-proof way
[ Dimitri John Ledkov ]
* Drop creating upstart jobs for serial getty.
Imported using git-ubuntu import.
Changelog parent: 402cae06bd
New changelog entries:
[ Balint Reczey ]
* Depend on packages in main instead of installing them at runtime
* Depend on vmdk-stream-converter instead of installing it at run time
* Use xz -T4 -0 instead of pxz (LP: #1701132)
Supported xz versions before 5.2 also accept the -T4 option but ignore
it.
* Depend on xz-utils instead of pxz
[ Mathieu Trudel-Lapierre ]
* auto/config: enable Debug::pkgDepCache::AutoInstall so tracking down
dependency bugs in the livefs is a little clearer.
[ Robert C Jennings ]
* live-build/functions: Update path for VMDKstream.py (LP: #1706116)
Imported using git-ubuntu import.
Changelog parent: e55a4a7910
New changelog entries:
* Build ubuntu back with tasks. The metapackage switch was due to g++
transition and needed some additional hint. This is adding maintenance
and as mentioned in 2.335, we can revert this.
Imported using git-ubuntu import.
Changelog parent: 2d6d50b86f
New changelog entries:
* Resurrect Balint's fix from
lp:~rbalint/livecd-rootfs/livecd-rootfs-autopkgtest-fix to wrap kpartx
and trap spurious errors, since the problem is still being seen
intermittently on i386 despite us calling sync before kpartx.
[ Mathieu Trudel-Lapierre ]
* Use ubuntu-server as the user for autologin on ubuntu-server live images.
[ Simon Quigley ]
* Use the correct task for lubuntu-next.
* Use --no-install-recommends for lubuntu-next, consistent with lubuntu.
Imported using git-ubuntu import.
Changelog parent: def10927e4
New changelog entries:
* For now, make sure all automated image builds are on the edge channel.
Eventually we will want to pass the channel as build metadata instead.
Imported using git-ubuntu import.
Changelog parent: de6bd722ae
New changelog entries:
* Mark autopkgtests isolation-machine since debootstrap won't work in a
container.
* Use xz to compress ubuntu-image .img files before transfer, so that we
have smaller downloads and retain file sparseness everywhere.
Imported using git-ubuntu import.
Changelog parent: 41970327be
New changelog entries:
[ Robert Jennings ]
* live-build/ubuntu-cpc/hooks/060-ipv6.chroot: remove faulty release
comparison prior to aa-series (LP: #1681548)
* live-build/ubuntu-cpc/hooks/999-extras.binary: Exit on first failure
[ Balint Reczey ]
* sync before calling kpartx to let writing to loop devices finish
* Sort and list dependencies nicely
* Require PROJECT environment to be set for lb build
* Allow overwriting IMAGEFORMAT even for ubuntu-cpc and ubuntu-server
* Optionally use ubuntu-image for building snap based images
Imported using git-ubuntu import.
Changelog parent: 170a7577de
New changelog entries:
* The ubuntu-server:live should use a casper-based initramfs to work
correctly. (LP: #1682460)
Imported using git-ubuntu import.
Changelog parent: 0031d747ac
New changelog entries:
* Setup kernel properly for ubuntu-server:live; we *do* want to build
kernel-generic and initrd-generic for this image. (LP: #1682460)
Imported using git-ubuntu import.
Changelog parent: 2ac1eda867
New changelog entries:
[ Balint Reczey ]
* Add a basic but configurable autopkgtest.
[ Mathieu Trudel-Lapierre ]
* Add ubuntu-server:live for a subiquity-based server image.
* Refactor functions out of ubuntu-cpc and ubuntu-server hooks.
Imported using git-ubuntu import.
Changelog parent: 26909642e9
New changelog entries:
[ Steve Langasek ]
* live-build/ubuntu-cpc/functions: don't call sleep as part of
umount_settle; udevadm settle is synchronous and there's no reason to
sleep after it.
* live-build/ubuntu-cpc/functions: umount_partition: don't call
umount_settle for each submount; just unmount them one by one and
settle at the end.
* Support passing IMAGE_TARGETS in the environment, to limit which images
are output as part of a build; particularly useful for ubuntu-cpc builds
which output multiple image types.
[ Nishanth Aravamudan ]
* live-build/ubuntu-cpc/hooks/061-open-iscsi.chroot: generate iSCSI
Initiator Name at first iscsid run for cloud images to ensure it is
unique (LP: #1444992).
[ Brian Murray ]
* Fix the OVF's metadata to include Ubuntu specific identifiers and
descriptions instead of the generic Linux ones. Thanks to Chris Glass.
(LP: #1656293)
* Add replace_grub_root_with_label function thereby consolidating multiple
uses of the same calls to sed. Thanks to Dan Watkins.
[ Adam Conrad ]
* Set device_tree_address for the new kernel in the RPi bootloader config.txt
Imported using git-ubuntu import.
Changelog parent: 1466492235
New changelog entries:
* Fix the manifest generation in OVA files so that ovf files don't have
double extensions. Thanks to Chris Glass. (LP: #1627931)
Imported using git-ubuntu import.
Changelog parent: 837997ea02
New changelog entries:
* live-build/auto/config: Don't remove .pyc files any more - we don't care
*that* much about the small space gain these days, and would prefer the
speed win. (LP: #1627190)
Imported using git-ubuntu import.
Changelog parent: b477837c31
New changelog entries:
[ Robert C Jennings ]
* ubuntu-cpc: Remove redundant copy of grub files.
Imported using git-ubuntu import.
Changelog parent: 77baa7fa7a
New changelog entries:
* Update the ubuntu-touch hints to try installing ubuntu-system-settings
instead of ubuntu-system-settings-online-accounts as this makes the dep
resolver more happy on amd64/i386 systems. This should fix the current
image build failure for yakkety i386 images.
Imported using git-ubuntu import.
Changelog parent: 0e395cc444
New changelog entries:
* Update the 00-uid-gid-fix.chroot_early hook for touch to include the new
known good bootstrap hash values.
Imported using git-ubuntu import.
Changelog parent: f8ca170475
New changelog entries:
* Use the virtual kernel for the arm64 cpc images instead of generic.
Imported using git-ubuntu import.
Changelog parent: 7c2e3247f1
New changelog entries:
* Use the virtual kernel for the powerpc64 cpc images (LP: #1625368)
Imported using git-ubuntu import.
Changelog parent: 326e7b0b97
New changelog entries:
[ Łukasz 'sil2100' Zemczak ]
* Temporarily change the 60-install-click.chroot script to pull in clicks for
arm64 builds from a different location for ubuntu-touch.
Imported using git-ubuntu import.
Changelog parent: 8d920803b0
New changelog entries:
[ Michael Vogt ]
* live-build/ubuntu-core/hooks/01-setup_user.chroot:
- do not create "ubuntu" user for ubuntu-core anymore, the
console-conf package will create this user now
* live-build/ubuntu-core/hooks/02-add_user_to_groups.chroot
- dropped
[ Steve Langasek ]
* live-build/ubuntu-cpc/hooks/042-vagrant.binary: fix unmount handling
so that the teardown is done properly /before/ we try to make an
image from our filesystem, since otherwise /etc/resolv.conf is broken.
LP: #1621393.
Imported using git-ubuntu import.
Changelog parent: 5fbc7fdd13
New changelog entries:
* live-build/auto/build: Move NetworkManager configuration to the right
place.
Imported using git-ubuntu import.
Changelog parent: cddd4d301b
New changelog entries:
* live-build/auto/build: If the image pre-installs network-manager, let it
manage all devices by default by shipping a default netplan policy.
Installing NM on an existing system only manages wifi and wwan, to avoid
interfering with networkd managed devices on existing server/cloud
instances.
Imported using git-ubuntu import.
Changelog parent: 6ebeaf88c0
New changelog entries:
* live-build/ubuntu-core/hooks/400-create-apt-get-warning.binary
- use echo to display the error, thanks ogra for pointing that out,
update the string also to use the new snappy command naming
Imported using git-ubuntu import.
Changelog parent: a23a770ff4
New changelog entries:
* live-build/ubuntu-core/hooks/400-create-apt-get-warning.binary,
500-create-xdg-wrapper.binary, 700-classic-dir.binary:
- Correct some syntax errors in the ubuntu-core snap hooks.
- Create a desktop entry and some mimetype associations for xdg-open in
ubuntu-core. That way interacting with web, email and documentations
urls in a snap should do the right thing.
Imported using git-ubuntu import.
Changelog parent: 74124543e3
New changelog entries:
* live-build/ubuntu-touch/includes.chroot/etc/lightdm/
lightdm.conf.d/90-phablet.conf:
- Don't have Touch greeters show a guest session. Touch isn't ready
for non-phablet users yet nor a multi-user greeter.
Imported using git-ubuntu import.
Changelog parent: 4109c1c2b3
New changelog entries:
[ Łukasz 'sil2100' Zemczak ]
* Remove the ubuntu-pd project from the scripts
* Add instead an ubuntu-touch-custom project for custom re-builds of
ubuntu-touch
[ Oliver Grawert ]
* sanitize the version number of the ubuntu-core snap
* sanitize the version number of the kernel snap
Imported using git-ubuntu import.
Changelog parent: eb0cb09a8d
New changelog entries:
[ Daniel Watkins ]
* Consolidate cloud images
- Remove .tar.gz and .tar.xz (removed in favour of the squashfs).
- Remove the MBR-only disk image in favour of the shared GPT/MBR UEFI
image.
- Remove '-disk1' from bootable image names.
[ Phil Roche ]
* Removed HWCLOCKACCESS=no from /etc/default/rcS (LP: #1581044)
Imported using git-ubuntu import.
Changelog parent: 2fcba79a9b
New changelog entries:
* Ubuntu-MATE now does follow Recommends; adjust the configuration for it
to not pass --no-install-recommends.
Imported using git-ubuntu import.
Changelog parent: ec4b354469
New changelog entries:
[ Michael Vogt ]
* add var/lib/snapd/classic in ubuntu-core
[ Daniel Watkins ]
* Don't overwrite the default sources.list in cloud images.
* Replace sources.list generated using COMPONENTS with the sources.list from
an Ubuntu Server installation (i.e. with all components enabled, and all
deb-src lines commented).
Imported using git-ubuntu import.
Changelog parent: 41e1ae746c
New changelog entries:
* name switch from ubuntu-core to just core was postponed ... temporarily
revert this bit til we have the necessary snapd bits in place.
Imported using git-ubuntu import.
Changelog parent: 7570a3c606
New changelog entries:
* rename the ubuntu-core snap to simply be "core", update the package
summary too
Imported using git-ubuntu import.
Changelog parent: aca40d6ebf
New changelog entries:
[ Michael Vogt ]
* update kernel snap building to match the new kernel policy
* system-image: add /usr/local/bin/xdg-open dbus helper
[ Oliver Grawert ]
* add u-boot-tools to all snappy arches
* drop flash-kernel from snappy, it is useless there
* create /boot/uboot dir on all arches and configure /etc/fw_env.config
everywhere
* adjust motd message on snappy (capitalize "Snappy Ubuntu Core" and replace
the "snappy --help" with "snap --help"
[ Adam Conrad ]
* Stop explicitly removing systemd-sysv for touch.
* Move touch resolution hints to a HINTS variable, and adjust for use
on dual-stack gl/gles arches where things don't quite work right.
Imported using git-ubuntu import.
Changelog parent: ad693abb51
New changelog entries:
* Rename old ubuntu-core tarballs to ubuntu-base to avoid confusion.
* Drop special-casing of ubuntu-core:system-image in places, now that
ubuntu-core unambiguously refers to the snappy Ubuntu Core image.
Imported using git-ubuntu import.
Changelog parent: 689e55f031
New changelog entries:
[ Michael Vogt ]
* add meta/kernel.yaml to the kernel snaps
[ Łukasz 'sil2100' Zemczak ]
* Add the new dhcpd user introduced by latest archive changes.
Imported using git-ubuntu import.
Changelog parent: c0750e3a3f
New changelog entries:
* drop linux-firmware-raspi2, it does not actually contain driver
firmware but bootloaders (and fails to install if its target dir
is missing).
Imported using git-ubuntu import.
Changelog parent: a8b139028e
New changelog entries:
[ Colin Watson ]
* Add a basic build-time syntax check for live-build/auto/*.
[ Oliver Grawert ]
* add multiverse to sources.list for snappy kernel builds
Imported using git-ubuntu import.
Changelog parent: dbfd5f49b7
New changelog entries:
* move the snappy kernel builds to the correct linux-image-$arch and
linux-firmware-$arch metapackages
Imported using git-ubuntu import.
Changelog parent: 4f2c87a4f1
New changelog entries:
* Follow linux-firmware-raspi2 renaming in the archive for raspi2 images.
Imported using git-ubuntu import.
Changelog parent: 9fff6129dd
New changelog entries:
* Follow up on recent changes from the new network-manager packages and add
the nm-openvpn user to touch. This should essentially fix the image build
failures.
Imported using git-ubuntu import.
Changelog parent: ccf58fecb7
New changelog entries:
* Update the passwd, shadow, group and gshadow bootstrap hashes for touch.
Imported using git-ubuntu import.
Changelog parent: 9fadf2c648
New changelog entries:
* Transition from ubuntu-snappy to ubuntu-core-snapd-units and snapd.
Imported using git-ubuntu import.
Changelog parent: 01521cefe4
New changelog entries:
[ Oliver Grawert ]
* live-build/ubuntu-core/hooks/25-create-generic-initrd.chroot:
kill the snappy os build if the initramfs-tools-ubuntu-core package
is not found
* make s390x known to the snappy builds
* skip kernel snap an device tarball builds for s390x and ppc64el
* drop listing of the device tarballs, this was only for debugging
[ Adam Conrad ]
* live-build/ubuntu-cpc/hooks/032-disk-image.binary: Install s390-tools
and sysconfig-hardware before we attempt to configure zipl.
Imported using git-ubuntu import.
Changelog parent: 15d22caf2c
New changelog entries:
* live-build/ubuntu-core/hooks/25-create-generic-initrd.chroot:
create a generic initrd inside the snappy os-snap so we do not need the
hackish ubuntu-core-generic-initrd package anymore.
Imported using git-ubuntu import.
Changelog parent: 3061756ecb
New changelog entries:
[ Adam Conrad ]
* Remove obsolete pvr-omap4 special-casing to simplify configs.
[ Daniel Watkins ]
* Enable building of powerpc cloud images.
Imported using git-ubuntu import.
Changelog parent: 93f2a06b3c
New changelog entries:
* create /etc/cloud/cloud.cfg.d/99-snappy-disable-network-config.cfg on
snappy so we do not end up with broken network config after cloud-init
ran (LP: #1563296).
Imported using git-ubuntu import.
Changelog parent: 42e2a00908
New changelog entries:
[ Xavi Garcia ]
* Adding a new hook to change the configuration file for upower.
Imported using git-ubuntu import.
Changelog parent: 43e896d8a8
New changelog entries:
* move mtab link to point to /proc/self/mounts instead of /proc/mounts
(LP: #1547033) in snappy builds
Imported using git-ubuntu import.
Changelog parent: f51f8e92a5
New changelog entries:
* adjust snap versions to only have one dash and use plus chars instead
Imported using git-ubuntu import.
Changelog parent: ce1a28e542
New changelog entries:
* add link for wlan mac address in dragonboard kernel snaps
* move dragonboard kernel snap to linux-snapdragon (with a currently hardcoded
version due to missing -meta package for this kernel, don't do that at
home !)
Imported using git-ubuntu import.
Changelog parent: 307bc170c2
New changelog entries:
* add support for dragonboard kernel snap
* remove grub-efi-arm64 to the arm64 OS snap as it breaks uboot
Imported using git-ubuntu import.
Changelog parent: a668d140cc
New changelog entries:
* Move the new touch click apps (unav, dekko, calendar) to the custom
tarball.
Imported using git-ubuntu import.
Changelog parent: 6052273963
New changelog entries:
[ Michael Vogt ]
* add dpkg.list to assets of the kernel snap
* add grub-efi-arm64 to the arm64 OS snap
[ Adam Conrad ]
* Build raspi2 images with multiverse for firmware.
Imported using git-ubuntu import.
Changelog parent: 24f93cf89e
New changelog entries:
* slightly adjust the naming of the OS snap for snappy builds so it becomes
easier for cdimage to grab and publish it.
Steve Langasek
Dimitri John Ledkov
Michael Hudson-Doyle
Michael Hudson-Doyle
Balint Reczey
Brian Murray
Didier Roche
Mathieu Trudel-Lapierre
Adam Conrad
David Mohammed
Iain Lane
Łukasz 'sil2100' Zemczak
Martin Pitt
Sebastien Bacher
Michael Terry
Oliver Grawert
Iain Lane
Daniel Watkins
Colin Watson