There was a question on if the comment removals in the `sed` were
required. The comments (`#`) are created by vmdk-stream-converter and
seem to cause no issues. `ddb.comment` is no longer being written by the
tool anymore. Moved the check earlier to ensure the new header isn't too
large before running truncate (otherwise it may be too long, and we
remove bits we want)
LP: #1893898 describes missing vmtools version from the vmdk headers.
The version should be added as ddb.toolsVersion = "2147483647" however
the sed was no longer replacing a ddb.comment field with the tools
version. Rather than subbing ddb.comment with toolsVersion, this commit
deletes ddb.comment (which the comment mentions could cause errors),
and adds the correct value. There was no visibility into the descriptor
during hook creation, so debug statements were added. This allows us to
quickly verify in the logs that bad statements are removed (the possibly
offending commetns), as well as ensuring that the toolsVersion is added
MOUNTPOINT_BACKUP_SOURCE_LIST is exposed when you call
setup_mountpoint. Consumers can use this variable if they need to
explicitly change something in sources.list wihout relying on the name
livecd-rootfs chooses.
In v2.672 the default boot behavior of cloud images changed:
- Prior to v2.672, cloud images with the linux-generic kernel attempt
to boot without an initramfs, would fail, and then retry with an
initramfs.
- After v2.672, cloud images with the linux-generic kernel boot with
an initramfs on the first try.
While the behavior is different between the two, they both result in
an instance that has booted with an initramfs. To ensure the changes
in v2.672 do not regress, we need an automated way to check if we are
attempting to boot without an initramfs and failing.
With this change, when we attempt to boot with an initramfs and fail,
initrdless_boot_fallback_triggered is set to non-zero in the grubenv.
This value can be checked after boot by looking in /boot/grub/grubenv
or by using the grub-editenv list command.
The snap-preseed command can do a number of things during the build
that are currently performed at first boot (apparmor profiles, systemd
unit generation, etc). This patch adds a call to reset the seeding and
apply these optimizations when adding a seeded snap. As a prerequisite
to calling snap-preseed we need to make /dev/mem available as well as
mounts from the host to perform this work, so those are also added here.
I recently pulled initramfs logic out of the base build hook, and
dropped that into the `replace_kernel` function. Any cloud image that
does not leverage the generic virtual kernel was expected to call
`replace_kernel` to pull in a custom kernel. That function will
disable initramfs boot for images that use a custom kernel.
Minimal cloud images on amd64 use the linux-kvm kernel, but the build
hook does not utilize the `replace_kernel` function. Instead, the
kernel flavor is set in `auto/config`. I pulled that logic out of
`auto/config` and am now calling `replace_kernel` in the build hook.
I also moved a call to generate the package list so that it will pick
up the change to the linux-kvm kernel.
snap_name[/classic]=track/risk/branch is now the supported snap name
specification, which allows to specify the full default track and
optional classic confinemnt.
Supporting such specification in the seedtext allows one to specify a
better default channel. For example, this will allow lxd to switch
from latest/stable/ubuntu-20.04 to 4.0/stable/ubuntu-20.04 as 4.0 is
the LTS track matching 20.04 support timeframe.
LP: #1882374
Initramfs-less boot, which is a boot optimization, should only be
applied where we know it could work for users and provide an improved
boot boot experience; images with custom kernels are candidates for
that.
Seeing any snap via snap_preseed will evaluate the base for each snap
and seed the appropriate base. There should be no reason to explicitly
seed the 'core' snap and with snaps moving to 'core18' this will add
'core' without need.
The _snap_post_process function is meant to install snapd if core18 is the
only core snap installed or removed snapd if core is installed and snapd
was not explicitly installed. But the current logic in _snap_preseed
will never call _snap_post_process. $core_name will never be empty
with the existing logic, but even if it were that would only be for the
'core' snap and we'd miss using the 'core18' logic that pulls in snapd.
Given the case statement in _snap_post_process can handle doing the
right thing given any snap we can just call it unconditionally.
Back in 2017 some code was added to ignore failures tearing down loop
devices. But debugging that growpart race on cloud images made me (very)
aware of a potential cause of the race: doing something like zerofree on
a device will cause udev scripts to run, and if they are still running
by the time kpartx is called, you would expect the kpartx -d to fail. So
lets see if a udevadm settle helps, and get rid of one of the "sometimes
this fails but we don't know why" comments...
With the removal of snap-tool failures are seen in image builds that do
not have the 'core' snap included by the seed. This is the case for the
minimized subproject of the ubuntu-cpc project where lxd/core is removed.
In that subproject, any binary hook which adds a snap that is based
on 'core' will not add 'core' and fail 'snap debug validate-seed'.
snap-tool included the following logic in the 'snap-tool info' when
determining snap bases:
# Have "base" initialized to something meaningful.
if self.is_core_snap():
snap_data["snap"]["base"] = ""
elif snap_data["snap"].get("base") is None:
snap_data["snap"]["base"] = "core"
The snap store does not return a base if the base is core which makes
this necessary. This patch looks for the base in 'snap info' output
and if none is found (and the snap is not snapd or core) it assumes the
base is 'core' and installs it. This restores the behavior lost in the
migration from snap-tool to snap cli.
snap-tool was added to support a deprecate cohort-key feature of the snap store.
Recent changes in snap assertions have added additional fields which snap-tool
is not retrieving. This resulted in snap install failures on first boot.
This patch removes snap-tool and returns to using the snap cli. This ensures
snap downloads will function without odd incompatibilities.
When getting the list of snaps to include on an image via germinate, we
process the snaps in alphabetical order. Currently we seed several
packages `gnome-foo` and also `gtk-common-themes`, the default provider
of `gtk-3-themes`. Since `gtk-common-themes` is alphabetically after
`gnome-foo`, the `seed.yaml` we generate is invalid when we are part way
through generating.
What we really care about, though, is not that the `seed.yaml` is always
valid at every step, but it is that it is valid at the *end* of seeding.
So for the germinate case, let's defer validation to happen once at the
end. Other callsites of `snap_preseed`, where callers are careful to
seed snaps in the right order, are unaffected by this.
This is apparently still required; without it snapd gives an error
message like:
stateengine.go:102: state ensure error: devicemgr: cannot proceed without seeding "core"
Util-linux 2.33 fixed mount --rbind --make-rslave which did not pass MS_REC
with MS_BIND and livecd-rootfs did only --bind --make-rslave effectively with
prior mount versions.
While mount --rbind --rslave are properly passed the flags to mount()
unmounting did not work cleanly with --make-rslave.
To clearly stop propagation of umount, --make-private is used instead of
--make-rslave and it is always set before umounts. Umount -R is replaced
with a simple umount since submounts are tore down in teardown_mountpoint()
earlier.
LP: #1813730
The generic assertion will be put in place if there are preseeded snaps.
A hook that wants to add its own model should be able to overwrite
the generic assertion. This patch allows a hook to continue unchanged
calling snap_prepare_assertions with a custom brand/model. The patch
will replace the generic brand/model if a custom brand/model is specified.
Prior to this patch the generic brand/model would remain in place.
There can only be one model assertion, so we don't need to disambiguate them.
This also brings us in line with the behaviour of `snap prepare-image`, and
consistency is nice.
This also splits up the preparation in to two functions, so that images that
want to use a custom model assertion but don't have any snaps to preinstall
don't end up with the core snap installed.
When no channel is given for a pre-seeded snap, the channel
should be stable/ubuntu-XX.YY to match Ubuntu policy.
This patch adds the LB_DISTRIBUTION var to config/{binary,chroot}
to have a common way of determining the Ubuntu XX.YY version
number between hooks and auto/build.
* Only shell out to set $account when we need to use it.
* Reduce scope of $account to make it local to the function
* Fix indenting within an 'if' block
John Chittum
Pat Viafore
Robert C Jennings
Steve Langasek
Dimitri John Ledkov
David Krauser
Joshua Powers
Balint Reczey
Michael Hudson-Doyle
Iain Lane
Colin Watson
Michael Vogt
Tobias Koch
Didier Roche
Jean-Baptiste Lallement
Jean-Baptiste Lallement
Cody Shepherd
Mathieu Trudel-Lapierre
Daniel Watkins