Imported using git-ubuntu import.
Changelog parent: 5d6be2b8a3
New changelog entries:
* clean up the userdata dir
* move the tarball around instead of copying it
* fix quoting of abootimg call harder
Imported using git-ubuntu import.
Changelog parent: fdb15fb4e5
New changelog entries:
* fix quoting in abootimg call for nexus7
* dont fail if the userdata dir already exists
Imported using git-ubuntu import.
Changelog parent: 82caa29542
New changelog entries:
* we want nvidia-tegra3 (the binary) not nvidia-graphics-drivers-tegra3
Imported using git-ubuntu import.
Changelog parent: 1d42aa78bb
New changelog entries:
* add linux-firmware-nexus7 and nvidia-graphics-drivers-tegra3 to nexus7
builds
* preseed the license popup of linux-firmware-nexus7, we will show
it in the installer for full image installs.
Imported using git-ubuntu import.
Changelog parent: ff441d12fb
New changelog entries:
* add nexus7 specific kernel cmdline
* move the nexus7 processing up a bit in the code so we can modify the
bootimg cmdline before the file gets copied around
Imported using git-ubuntu import.
Changelog parent: 20f625ae79
New changelog entries:
* add a dependency on android-tools-fsutils for armhf builds
* add nexus7 live-build configuration
* add nexus7 post processing with make_ext4fs for teh tarball to roll a
proper android img file
Imported using git-ubuntu import.
Changelog parent: 96cd9adbcd
New changelog entries:
* Revert binary/$INITFS/kernel-$FLAVOUR to the unsigned kernel, and link
signed kernels to binary/$INITFS/kernel-$FLAVOUR.efi.signed instead
(LP: #1067659).
Imported using git-ubuntu import.
Changelog parent: 347609b607
New changelog entries:
* disable all slideshows on al preinstalled images, due to (LP: #1066046)
the installer crashes when trying to start up webkit for teh slideshow
Imported using git-ubuntu import.
Changelog parent: abf654a898
New changelog entries:
* make sure preinstalled ac100 images have multiverse enabled in their
sources.list
Imported using git-ubuntu import.
Changelog parent: c05b463ee1
New changelog entries:
* live-build/auto/build: If they exist, link *.efi.signed versions of the
kernel to binary/$INITFS/kernel-$FLAVOUR rather than the unsigned
versions.
Imported using git-ubuntu import.
Changelog parent: ee696bfb04
New changelog entries:
* fix lubuntu and xubuntu preinstalled handling so we end up with the
right slideshows in oem-config
Imported using git-ubuntu import.
Changelog parent: 81efc9c7e5
New changelog entries:
* live-build/auto/config: Add photography and publishing metas for
Ubuntu Studio (LP: #1057816)
Imported using git-ubuntu import.
Changelog parent: a571547648
New changelog entries:
* live-build/auto/config: Build ubuntu-server and ubuntu-core with
--initramfs=none, since we don't need casper in those images.
Imported using git-ubuntu import.
Changelog parent: d2dadbecc0
New changelog entries:
* Reorganise code to avoid kernel installation on
ubuntu-server/ubuntu-core so that it works for all architectures.
Imported using git-ubuntu import.
Changelog parent: c257ebba9e
New changelog entries:
* live-build/auto/config: Set KERNEL_FLAVOURS=none for ubuntu-server as
well, so that live-build/auto/build doesn't try to copy out kernel
images.
Imported using git-ubuntu import.
Changelog parent: 8bc91f092f
New changelog entries:
* Actually apply the change done in 2.74 as it was only done to the
legacy code...
- Change mksquashfs compression flags for LTSP images, turning
compression back on to match current ltsp-update-image behaviour.
Imported using git-ubuntu import.
Changelog parent: 2eff0cadbc
New changelog entries:
* live-build/auto/config: Remove standard and server tasks from
ubuntu-server squashfs, and build it with no kernel packages so that
they can be added more correctly later by the installer (LP: #1028453).
Imported using git-ubuntu import.
Changelog parent: fb36bfecb6
New changelog entries:
* live-build/auto/build: live-build now calls hybrid ISO9660 images
binary.hybrid.iso rather than binary-hybrid.iso.
Imported using git-ubuntu import.
Changelog parent: edd37a1bb5
New changelog entries:
* add pvr-omap4 driver to omap4 image builds for everything but
ubuntu-server, ubuntu-core and base images so we have GLES working
out of the box on them
Imported using git-ubuntu import.
Changelog parent: d3dd41acce
New changelog entries:
* setting --architectures seems to have weird side effects on arm
(considering all but the buildd arch as foreign etc), disable it for a
testbuild...
Imported using git-ubuntu import.
Changelog parent: 1b97ff0446
New changelog entries:
* revert the last change, i was not aware that unity-2d was also ripped out
of the archive and not only removed from the seeds
Imported using git-ubuntu import.
Changelog parent: b141c7c4b0
New changelog entries:
* live-build/auto/config:
- Don't try to install an empty task name when building an image without
a live task.
- Fix installation of ubuntu-server fstab removal hook.
- Pass --architectures to 'lb config', to make it easier to build images
for a different architecture.
- Attempt to restrict task installation to the native architecture.
Imported using git-ubuntu import.
Changelog parent: d0d1c9c8ac
New changelog entries:
* Adjust for live-build interface changes up to 3.0~a57-1ubuntu1.
* Break ubuntu-defaults-builder (<< 0.32) to account for these interface
changes.
Imported using git-ubuntu import.
Changelog parent: 672c5ccad6
New changelog entries:
* Add u-boot-tools to the installed set for all u-boot ARM images
* Remove ti-omap4-ppa from the omap4 images; it's no longer used
Imported using git-ubuntu import.
Changelog parent: fca5765e72
New changelog entries:
* Install a hook to remove /etc/fstab rather than building ubuntu-server
with --debian-installer=live; the latter has unwanted side-effects.
Imported using git-ubuntu import.
Changelog parent: a83cc8b766
New changelog entries:
* live-build/auto/config: Add server task to ubuntu-server images.
Imported using git-ubuntu import.
Changelog parent: b714cffe3d
New changelog entries:
* live-build/auto/config: Emit sources.list entries for -proposed if the
environment variable PROPOSED is set (LP: #1019514).
* BuildLiveCD: If the -p option was used, pass PROPOSED=1 to 'lb config'.
Imported using git-ubuntu import.
Changelog parent: 57c496193f
New changelog entries:
* Add (extra-)override parsing to the preinstalled pool to make sure
we get task headers in the local pool for tasksel (LP: #819899)
* Move temp directories under config so they get cleaned properly
* Invoke apt-get update once with only the sources.list fragment
for the local archive, so our package/task selection more closely
mimics the CD experience (LP: #985258, #985737, #985280, #819900)
* Write out a standard sources.list entry for preinstalled systems
that's similar to the one generated by installers (LP: #985291)
Imported using git-ubuntu import.
Changelog parent: a784184f18
New changelog entries:
* Add minimal and standard tasks to Ubuntu Studio images (LP: #962585).
Imported using git-ubuntu import.
Changelog parent: c6c73ef45b
New changelog entries:
* Add the ubiquity slideshow back to PREINSTALLED images (LP: #960688)
Imported using git-ubuntu import.
Changelog parent: ad94ccd39b
New changelog entries:
* On Lubuntu and Xubuntu, only use the generic kernel on amd64 and i386.
Imported using git-ubuntu import.
Changelog parent: 8b2dd1fb8b
New changelog entries:
[ Colin Watson ]
* Use lowlatency for Ubuntu Studio amd64, since lowlatency-pae is
i386-specific (LP: #959011).
[ Julien Lavergne ]
* Use generic (non-PAE) kernel for Lubuntu (LP: #958866).
Imported using git-ubuntu import.
Changelog parent: 1fba4c99da
New changelog entries:
* Switch Ubuntu Studio to lowlatency-pae kernel rather than lowlatency
(LP: #956250).
Imported using git-ubuntu import.
Changelog parent: ae01ea0bf5
New changelog entries:
* Move ac100-tarball-installer from install set to live set
to make sure it's not pulling in other bits in the install
pass (and because installers belong in the live set anyway)
Imported using git-ubuntu import.
Changelog parent: d5c11a1621
New changelog entries:
[ Ante Karamatić ]
* Add cloud-live project to livecd.sh and BuildLiveCD.
[ Jonathan Riddell ]
* Replace kubuntu-mobile with kubuntu-active
* Remove kubuntu-netbook, now just part of kubuntu-desktop
Imported using git-ubuntu import.
Changelog parent: b3cb11f199
New changelog entries:
* Build Lubuntu with --no-install-recommends, to match its seed structure
(LP: #918401).
Imported using git-ubuntu import.
Changelog parent: fcc9b0a0b6
New changelog entries:
* Remove the x-loader packages from omap and omap4 flavours, as they
are now using the MLO provided by their respective u-boot packages.
* Add zram-config to the ac100 subarch to replace the installer hack.
Imported using git-ubuntu import.
Changelog parent: a6e1b5a61d
New changelog entries:
* live-build/auto/config: Fix support for ubuntustudio-dvd project.
Imported using git-ubuntu import.
Changelog parent: ca831414fd
New changelog entries:
[ Adam Conrad ]
* Update maintainer to Ubuntu Developers, LaMont doesn't upload much.
[ Colin Watson ]
* Get live-build to divert update-initramfs while building the chroot.
This should cut a few minutes off builds, particularly on slow
architectures.
Imported using git-ubuntu import.
Changelog parent: 4e1df5e183
New changelog entries:
* Fix sense of live/preinstalled change in 2.46; add the live task for
non-preinstalled images, rather than only for preinstalled images.
Imported using git-ubuntu import.
Changelog parent: 2bec67407a
New changelog entries:
* Guard legacy cloop code in a [ -f ], so it stops failing.
* Don't add the LIVE_TASK for any PREINSTALLED images.
Imported using git-ubuntu import.
Changelog parent: 312f12ef26
New changelog entries:
* Mirror armel support as armhf, so we can build all the same images.
* Allow ARCH to be specified on the BuildLiveCD command line as -A,
so that it doesn't have to be hardcoded for non-native builders.
Imported using git-ubuntu import.
Changelog parent: 3b110adb23
New changelog entries:
* Explicitly select ubuquity frontend as well, to match the
oem-config frontend, and avoid pulling in unwanted deps.
Imported using git-ubuntu import.
Changelog parent: bfc78e8dcd
New changelog entries:
* Re-enable swap on jasper-using images, a regression from
the switch from livecd-rootfs to live-build (LP: #868662)
Imported using git-ubuntu import.
Changelog parent: 3b9da43910
New changelog entries:
* Revert the previous change and apply it for all $PREINSTALLED
targets instead of just ext2|ext3|ext4, so ac100 gets the fix.
Imported using git-ubuntu import.
Changelog parent: bca9a94737
New changelog entries:
* Explicitely select the oem-config frontend to install on a
per-project basis, to match the ubiquity in use (LP: #820514)
Imported using git-ubuntu import.
Changelog parent: 720cdd5c88
New changelog entries:
* Add main, restricted, universe, and multiverse to the sources.list
for Wubi disk images (LP: #855301).
Imported using git-ubuntu import.
Changelog parent: 3bad58702f
New changelog entries:
* BuildLiveCD: Fix typo that broke installing ubuntu-defaults-builder and
its recommendations.
* Squash errors from 'ls vmlinu?-*'.
Imported using git-ubuntu import.
Changelog parent: 99d9759e40
New changelog entries:
[ Colin Watson ]
* BuildLiveCD: Add subproject and ubuntu-defaults-image locale to error
mail subject.
* BuildLiveCD: Install recommendations of ubuntu-defaults-builder.
[ Oliver Grawert ]
* also store the size of the ac100 tarball in the initrd, since the tarball
changes its name several times during build we need a second criteria to not
loop over all availiable tarballs with md5sum at install time.
Imported using git-ubuntu import.
Changelog parent: d6f140ca28
New changelog entries:
* drop FLASH_KERNEL_SKIP from live-build config, flash-kernel suppression is
handled through a diversion already.
* add FLASH_KERNEL_SKIP explicitly to the post build ac100 update-initramfs
chroot call.
Imported using git-ubuntu import.
Changelog parent: d82b716b81
New changelog entries:
* Link binary.iso or binary-hybrid.iso, if found, into the output
directory for use by BuildLiveCD.
* Tolerate ubuntu-defaults-image's kernel renaming.
* Add a -u option to BuildLiveCD which calls ubuntu-defaults-image.
Imported using git-ubuntu import.
Changelog parent: 8576454a13
New changelog entries:
* provide .bootimg as a link to .bootimg-$FLAVOUR similar to the
naming scheme we use for initrd and kernel files.
Imported using git-ubuntu import.
Changelog parent: 26a8853159
New changelog entries:
* rename ac100 bootimage to something the build system can parse easier.
Imported using git-ubuntu import.
Changelog parent: 4236d780d0
New changelog entries:
* make sure flash-kernel is not executed during build, this setting wasn't
transitioned from livecd.sh yet
Imported using git-ubuntu import.
Changelog parent: e6aabfe1aa
New changelog entries:
* include the md5 sum of the rootfs tarball in the initrd, so the installer
can check against it for ac100 installs
* post process the kernel and initrd for ac100 though abootimg to get a
proper android boot image
Imported using git-ubuntu import.
Changelog parent: 2d155200d4
New changelog entries:
[ Jani Monoses ]
* Add mx5 subarch support for Freescale i.MX53
[ Oliver Grawert ]
* adjust the packagelist for ac100 a bit, according to adam it should not
need the kernel metapackage seeded if it matches the naming convention
* do not install preinstall-pool on ac100-server, it breaks for no apparent
reason atm, this makes server rootfses for ac100 buildable again.
Imported using git-ubuntu import.
Changelog parent: 66e5f97cc1
New changelog entries:
[ Adam Conrad ]
* Switch a hardcoded "boot" to "$INITFS" in auto/build.
[ Colin Watson ]
* BuildLiveCD: Make sure livecd-rootfs is still installed in the chroot
after the dist-upgrade.
Imported using git-ubuntu import.
Changelog parent: 9ea613db8f
New changelog entries:
* make sure ac100 images have universe enabled since the kernel lives there.
Imported using git-ubuntu import.
Changelog parent: d67d517c3a
New changelog entries:
* make sure the right packages are installed on armel+ac100 subarch builds
Imported using git-ubuntu import.
Changelog parent: 5f40039fe4
New changelog entries:
* Add support for building a pool of packages into the live config:
- define SEEDMIRROR, PREINSTALL_POOL, PREINSTALL_POOL_SEEDS in config
- set PREINSTALL_POOL_SEEDS to "server-ship" for ubuntu-server
- crib seed inheritance logic from cdimage implementation of same
- run germinate against seeds from SEEDMIRROR if to populate
PREINSTALL_POOL with a list of packages from PREINSTALL_POOL_SEEDS
- create a local-hook to download PREINSTALL_POOL packages to rootfs
* And add support to deal with the above pool of packages during build:
- generate a GPG key in the background if we're going to need one
- create a sources.list.d entry pointing at the rootfs pool
- create a Packages file and create and sign a Release file
- add our previously-generated key to the apt keyring and toss it
Imported using git-ubuntu import.
Changelog parent: 5f2fbb762b
New changelog entries:
* export LB_LINUX_FLAVOURS="none" in auto/clean, so the clean
routine doesn't bomb out with no kernels selected. This almost
certainly needs fixing in live-build, but works here for now
Imported using git-ubuntu import.
Changelog parent: b6c0413acc
New changelog entries:
* Add support for building new "ubuntu-core" rootfs tarballs:
- add project support to BuildLiveCD and auto/config
- make auto/config and auto/build deal with plain FS types
- add some logic to auto/build to not choke with no kernels
* Minor cleanups to BuildLiveCD (LANG=C, bump current suite)
* Fix one spot where I missed future-proofing ext4 support
Imported using git-ubuntu import.
Changelog parent: 50cf3a267c
New changelog entries:
* Support generating different binary image types using
BINARYFORMAT=iso-hybrid and so on (although this won't actually work
until we create a syslinux-themes-ubuntu package).
Imported using git-ubuntu import.
Changelog parent: fe516c7a7f
New changelog entries:
* Handle package/task list changes in live-build 3.0~a22-1.
* Handle local sources.list changes in live-build 3.0~a22-1.
Imported using git-ubuntu import.
Changelog parent: 4c668f97e4
New changelog entries:
* Rename the ARM headless image to ubuntu-server for oneiric
* Future-proof --chroot-filesystem support for a switch to ext4
Imported using git-ubuntu import.
Changelog parent: bd1b5431d0
New changelog entries:
* Use all_chroot_pyc-purge.sh hook from live-build 3.0~a21-1ubuntu4.
Imported using git-ubuntu import.
Changelog parent: d53a745359
New changelog entries:
* Install xubuntu-live for xubuntu, not edubuntu-live (LP: #800211).
Imported using git-ubuntu import.
Changelog parent: 7af7abdcc0
New changelog entries:
* Pass correct IMAGEFORMAT through to live-build from BuildLiveCD.
* Add Lubuntu support.
* Set --chroot-filesystem option if IMAGEFORMAT is ext2 or ext3.
Imported using git-ubuntu import.
Changelog parent: d53152166c
New changelog entries:
* Remove old config directory before creating a new configuration.
Imported using git-ubuntu import.
Changelog parent: 757cfb724f
New changelog entries:
* Set pipefail (bash-specific) in auto/build so that we fail immediately
if the main image build fails.
* Anchor regex to avoid misdetecting vmlinux-3.0-0-powerpc64-smp as a
powerpc flavour kernel.
Imported using git-ubuntu import.
Changelog parent: 7e1b37f6c2
New changelog entries:
* Fix ordering of log file creation in BuildLiveCD.
* Fix permissions in BuildLiveCD when setting up auto directory.
* Switch from --binary-remove-linux to config/binary_rootfs/excludes.
Imported using git-ubuntu import.
Changelog parent: 131478de62
New changelog entries:
* Add live-build support. The old livecd.sh is still here for
compatibility, but this package's primary purpose is now to provide
Ubuntu-specific configuration for live-build.
Oliver Grawert
Colin Watson
Micah Gersten
Stéphane Graber
Adam Conrad
Jonathan Riddell
Evan Dandrea
Jani Monoses