ipc was dropped as an apparmor feature. checked by grabbing the latest
lunar VM, installing the latest kernel, doing a reboot, and comparing
directories and files. compared all files and the only diff is the ipc
posix_mqueue
Evolve the seed to only ship the specific part useful to WSL users. This
allows to trim down the image size.
Co-authored-by: Jean-Baptiste Lallement <jean-baptiste@ubuntu.com>
For the SiFive HiFive Unmatched board we create a pre-installed image using
u-boot-menu. Increase the watchdog threshold in this case too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
With Radeon GPUs and kernel 5.19 a soft lockup was observed.
Increase the watchdog threshold.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Using numbered configuration fragments makes the order of application
easier to track
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This allows to consolidate linux-kvm and linux-generic kernel
flavours. This brings the perfomance benefit of linux-kvm flavour to
all cloud and pre-installed images. It does trade data-safety.
LP: #2006511
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
According to the EBBR specification the GPT partitions for firmware should
have attribute bit 0 (Required Partition) set.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Since version 2022.10 U-Boot SPL and U-Boot are installed onto the same partition.
Package nezha-boot0 is not needed anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
RISC-V boards tend to boot slowly.
We should provide progress information when booting.
Use 'efi=debug earlycon' on the Linux command line via new file
/etc/default/grub.d/cmdline.cfg.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We add a ubuntu user inside the image because we
want to have a operational nonroot user and also
be aligned with the other Ubuntu images.
Signed-off-by: Samir Akarioh <samir.akarioh@canonical.com>
The Nezha and the LicheeRV boards do not have enough memory for an initrd
with most modules. Therefore the number of included modules has to be
reduced.
Create file /etc/initramfs-tools/conf.d/modules_list.conf
to set MODULES=list.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Remove redirections of type
command &1>2
Executing the command in the background and creating and empty file '2'
was never intended.
As the messages are information only redirecting to stderr would not make
sense either.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
So that people without network access can download the package and
install it using a usb drive for example.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
This reverts commit d5a7d6655f.
The Wifi driver package is in universe and can't be promoted in time for
the release, so revert this.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
The LicheeRV Dock board comes with only 512MB of DRAM so the only difference
with a Nezha image is the fact that we have to remove
cryptsetup-initramfs package which makes the initrd too big for the
board to boot.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Current Kinetic GCE image builds are failing with the following error:
update-initramfs: Generating /boot/initrd.img-5.19.0-1004-gcp
zstd: error 25 : Write error : No space left on device (cannot write compressed block)
E: mkinitramfs failure zstd -q -1 -T0 25
Seems like after `linux-gcp` update from 5.15 to 5.19 `linux-modules` package
has gotten ~40MB larger and with that GCE image builds are over the edge wrt
available disk space in chroot.
Bumped up disk image size for amd64 to 3.5GB to match the sizes used by armhf
and generic images.
The cloud-init bug (see LP:1968873) got fixed now so using a sshd
config snippet should work now.
This partly reverts commit aa1be5eaaa
but uses now 60-cloudimg-settings.conf instead of
10-cloudimg-settings.conf .
For now, all RISC-V hardware is SBC-like board which embed a Wifi
chipset so install wpasupplicant by default. We'll certainly split the
seeds between server and embedded hardware later.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
* Fix some issues with the netboot tarballs:
- Include the signed shim (oops).
- Make the kernel path on disk and in the bootloader config match (more
oops).
- Make paths more architecture dependent as the code in grubnetXXX.efi to
probe a platform dependent path first doesn't work.
While merging the VisionFive support, we removed the installation of
u-boot-menu for the Unmatched by mistake: fix this by reinstating it.
Fixes: ce9f5cacca ("riscv: Add support for StarFive VisionFive")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
This change triggered a bug in cloud-init (see LP:1968873). cloud-init
does not recongnize sshd options set in /etc/ssh/sshd_config.d/ and
cloud-init modifies directly /etc/ssh/sshd_config which gets then
overwritten by settings from /etc/ssh/sshd_config.d/ .
This reverts commit b54d24ff33.
3.5G is not enough for riscv64 preinstalled as the creation of the initrd fails
with the following error:
Creating config file /etc/default/grub with new version
Processing triggers for initramfs-tools (0.140ubuntu13) ...
update-initramfs: Generating /boot/initrd.img-5.15.0-1011-generic
zstd: error 25 : Write error : No space left on device (cannot write compressed block)
E: mkinitramfs failure zstd -q -1 -T0 25
update-initramfs: failed for /boot/initrd.img-5.15.0-1011-generic with 1.
dpkg: error processing package initramfs-tools (--configure):
installed initramfs-tools package post-installation script subprocess returned error exit status 1
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
The image created uses a UEFI bootflow, so we install grub for this board
only. We also need flash-kernel to install the dtb where grub can find
it.
This image is specifically architectured so that it can be installed on
a "factory" board, meaning using the u-boot firmware which was
originally implemented for Fedora, so we need the p3 partition that
embeds a uEnv.txt file to tell u-boot what/where to load next stage.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Define the image layout for the Nezha board.
The U-Boot SPL based boot0 may be installed starting in sector 16 or 256.
As sector 16 is incompatible with GPT partitioning use sector 256.
The primary U-Boot image is expected to start at sector 32800 and its
backup in sector 24576.
Cf. https://linux-sunxi.org/index.php?title=Allwinner_Nezha&oldid=24469
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Dan Bungert
Łukasz 'sil2100' Zemczak
Dimitri John Ledkov
John Chittum
Sean Davis
Michael Hudson-Doyle
Steve Langasek
Didier Roche
Heinrich Schuchardt
Erich Eickmeyer
Sebastien Bacher
Utkarsh Gupta
Samir Akarioh
Brian Murray
Simon Poirier
Alexandre Ghiti
Ivan Kapelyukhin
William Wilson
Rudra Bali
Thomas Bechtold