We are creating a derivative of disk-image, replacing the kernel with
linux-kvm, removing initramfs, and creating a qcow2 image.
Source: ~patviafore/livecd-rootfs/+git/livecd-rootfs:linux_kvm_image
Modifications: fixed conflict in debian/changelog entry and bumped
version.
Signed-off-by: Tiago Stürmer Daitx <tdaitx@gmail.com>
Configure cloud-init to look for its seed in the vFAT boot partition on
raspberry pi images; the corresponding gadget is configured to place the
user-data, meta-data, and network-config files there.
Source: ~waveform/ubuntu/+source/livecd-rootfs:cloud-init-boot
This is another thing that goes unused when there is no human console user
(and we already don't have the locales themselves present on a minimal
image).
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1829333
The addition of disk-image to series files in a prior commit required
some explanation. Without comment support in series files that was
not possible. This patch adds support for comments and adds those
comments as well.
The following targets have livecd.ubuntu-cpc.manifest (and
livecd.ubuntu-cpc.ext4) which differ in some way from the 'all'
target. They are all missing grub-efi and other modifications:
root-dir
squashfs
tarball
These targets do not depend on the 'disk-image' target. This means that
the ext4 produced will lack the uefi modifications (and any from the
disk-image target binary hooks).
Since the ext4 file is common to all builds there is a chance that a
parallel build from one of these targets could overwrite this artifact.
This patch ensures that all targets will produce consistent base output.
This avoids us having apt cache files in the final image.
For auto/build, we move the call to clean_debian_chroot to the end,
this also takes care of the caches generated by apt-get update
in case of a preinstalled-pool.
For layered, it's just a simple swap of the lines.
LP: #1826377
commit a993592 introduced an additional call to create_manifest
(and snap-seed-parse) to write binary/boot/filesystem.packages. This
caused duplicate snap lines in the qcow manifest. This is because the
live-build/auto/binary code assumes that after 'lb binary' is run the
filesystem.packages will only have debs and it calls snap-seed-parse to
add them to the file. The commit changed filesystem.packages in the
ubuntu-cpc uefi binary hook to include debs and snaps.
This patch keeps the intent of the prior patch, updating the
filesystem.packages file for the content of the uefi disk image, but
only writes a listing of debian packages to match the expected content
of filesystem.packages. The snaps will still be added in generic code
in live-build/auto/build.
ubuntu-cdimage/debian-cd/tools/add_live_filesystem helpfully adds a
'filesystem.' prefix to the squashfs, hence the name of the file
didn't match what's on disk.
grub-probe must not be called during image build so grub is diverted. In
multilayer image the chroot is always the tip of the filesystem, so we
divert grub at the beginning of each pass and undivdert it as the end.
For flat images, it's diverted just before building the chroot and
undiverted after.
UbuntuStudio image builds have recently begun failing as a result of adding a
grub theme customization to their flavor, which they then try to apply by
running update-grub from their maintainer scripts. This fails with:
Setting up plymouth-theme-ubuntustudio (0.57) ...
update-alternatives: using /usr/share/plymouth/themes/ubuntustudio-logo/ubuntustudio-logo.plymouth to provide /usr/share/plymouth/themes/default.plymouth (default.plymouth) in auto mode
update-alternatives: using /usr/share/plymouth/themes/ubuntustudio-text/ubuntustudio-text.plymouth to provide /usr/share/plymouth/themes/text.plymouth (text.plymouth) in auto mode
update-initramfs: diverted by livecd-rootfs (will be called later)
/usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).
dpkg: error processing package plymouth-theme-ubuntustudio (--configure):
installed plymouth-theme-ubuntustudio package post-installation script subprocess returned error exit status 1
Packages providing grub themes should be able to call update-grub from their
maintainer scripts, and they should be able to be installed under
livecd-rootfs. It's surprising to me that this hasn't been a problem before
now for any flavors.
We know that grub-probe should not be called as part of an image build, so
just use our standard helper function to divert it before running the chroot
stage and undivert it after.
Installing policyrcd-script-zg2 doesn't quite do this because of the way
that live-build installs its own temporary version of policy-rc.d. The
only remotely sensible way I can see to deal with this is to create the
symlink manually.
Remove wants from local-fs.target, add wants from the uuid device instead.
Tested by applying these changes from pre-pivot-root by modifying
/root files in place whilst booting with break=bottom.
Util-linux 2.33 fixed mount --rbind --make-rslave which did not pass MS_REC
with MS_BIND and livecd-rootfs did only --bind --make-rslave effectively with
prior mount versions.
While mount --rbind --rslave are properly passed the flags to mount()
unmounting did not work cleanly with --make-rslave.
To clearly stop propagation of umount, --make-private is used instead of
--make-rslave and it is always set before umounts. Umount -R is replaced
with a simple umount since submounts are tore down in teardown_mountpoint()
earlier.
LP: #1813730
When the REPO_SNAPSHOT_STAMP variable is set, the auto/build script will attempt
to launch a transparent HTTP proxy on port 8080, and insert an iptables rule to
redirect all outgoing HTTP requests to this proxy.
The proxy, contained in the `magic-proxy` Python script, examines each request
and silently overrides those pointing to InRelease files or files that are
listed in InRelease files. It will instead provide the contents of the requested
file as it was at REPO_SNAPSHOT_STAMP, by downloading the corresponding asset
"by hash".
Adds a function reduce_pass_size which removes duplicated files between
layers. A duplicate file is a file with same path, size, mode, owners
and content on 2 related layers.
We don't want to regress the ubuntu desktop traditional image when
livecd-rootfs lands uncordinated with ubuntu-cdimage & debian-cd.
Decoupling enables us to:
- land livecd-rootfs (no change for ubuntu-desktop project,
ubuntu-desktop:ubiquity-ng can be tested once the 2 others branches
lands)
- land ubuntu-cdimage & debian-cd for publishing any arbitrary squashfs
names
- finally, revert that commit and land it in livecd-rootfs to transform
the traditional ubuntu-desktop image to a layered approach.
Fixed prefix for passes to not conflict with global prefix
Set layer to none for layer without language packs
Copy size and manifest to the target directory
Make sure the diff always diffes existing manifests
lb_chroot_includes now takes the name of the pass as first argument and
will includes files for the corresponding pass from the directory
include.chroot.<pass>
Default Ubuntu desktop to the layered format
Remove the requirement on setting IMAGEFORMAT to layered to build a
layered image and relies on PASSED instead.
Don't install gpg or gpg-agent when building buildd images for series
earlier than bionic. (In earlier series, those packages didn't exist
and gnupg was build-essential.)
- Do not run apt-get update (which can bring in package lists if we are
unlikely wrt publisher schedules).
- Run apt-get clean to clear out downloaded debs of curtin/casper and
dependencies.
- Do not install user-setup.
- Use the core snap from the base filesystem if present.
This patch currently only applies to the "ubuntu-cpc" project.
More and more logic has been going into the hook scripts to decide under which conditions they should run or not. As we are moving to parallelized builds of image sets, this will get even more complicated. Base hooks will have to know which image sets they belong to and modification of the dependency chain between scripts will become more complicated and prone to errors, as the number of image sets grows.
This patch introduces explicit ordering and dependency handling for scripts through the use of `series` files and an explicit syntax for dependency specification.
2.02+dfsg1-5ubuntu5 grub will automatically fall back to booting with an
initrd if one is available, so we can now always attempt initramfsless
boot for cloud images which almost always works and causes only minimal
increase in boot speed for cases where it does not.
The generic assertion will be put in place if there are preseeded snaps.
A hook that wants to add its own model should be able to overwrite
the generic assertion. This patch allows a hook to continue unchanged
calling snap_prepare_assertions with a custom brand/model. The patch
will replace the generic brand/model if a custom brand/model is specified.
Prior to this patch the generic brand/model would remain in place.
Dimitri John Ledkov
Colin Watson
Steve Langasek
David Krauser
Tiago Stürmer Daitx
Łukasz 'sil2100' Zemczak
Pat Viafore
Balint Reczey
Michael Hudson-Doyle
Julian Andres Klode
Robert C Jennings
Tobias Koch
Didier Roche
Jean-Baptiste Lallement
Jean-Baptiste Lallement
Colin Watson
Cody Shepherd
Steve Langasek
Aleksandr Bogdanov
Adam Conrad
Colin Watson