e6bbe5f8a5
Export the subproject into config/chroot and config/binary, so that this
...
information is available to per-project hooks that need to be
subproject-aware (e.g., to skip steps when SUBPROJECT=minimize)
7 years ago
abbbeb8fda
Begin adding support for a project-independent 'minimize' subproject,
...
which (ironically) omits ubuntu-minimal in favor of using only the
minbase package set.
7 years ago
7c58bcecf0
Merge lp:~rbalint/livecd-rootfs/vagrant
7 years ago
20617c6f51
Don't ask for password and GECOS while creating vagrant user
7 years ago
8d43597228
add ExecStartPre=/usr/bin/subiquity-loadkeys to subiquity.service
...
This makes shift-tab work
7 years ago
45201111a6
Mount using --make-rslave to ensure safe unmounts for rbind mounts
7 years ago
5355732bc8
* Add GENERATE_ROOTFS_ONLY to support generating a single rootfs.
...
* Add a test for SUBPROJECT when PROJECT comes to ubuntu-server.
7 years ago
8a8d203743
* Add a test for SUBPROJECT when PROJECT comes to ubuntu-server.
...
* Use notations "0/1" instead of "false/true" as a value for GENERATE_ROOTFS_ONLY.
7 years ago
61764acade
only show alert (i.e. panic) kernel messages on the console when subiquity is running
...
otherwise we get spam when probing for block devices and not finding any floppy
drives...
7 years ago
bcb2bcc1cd
Remove spurious call to 'sync'; we don't need to flush all disk caches
...
on the system to cleanly unmount a partition.
7 years ago
9802843885
make file paths a bit less comical
7 years ago
54c78064d2
Add GENERATE_ROOTFS_ONLY to support to generate a single rootfs.
7 years ago
228ed7c87b
Remove 'IMAGETYPE' and 'IMAGEFORMAT' bits per the suggestions.
7 years ago
4941d4ee14
move default netplan to where the hook will pick it up
...
(i hope)
7 years ago
9c9dbda327
* Enable systemd-networkd by default.
...
- Usually, netplan's systemd-generator enables systemd-networkd and
systemd-networkd-wait-online on boot. But netplan configuration is not
yet generated at that point by cloud-init. Cloud-init generates in the
network-pre.target and expects the network.target /
network-online.target to work. These are already part of the ongoing
systemd transaction, thus cannot be injected into the boot-sequency by
cloud-init local mode. Therefore make sure cloud images include
networkd in the initial boot transaction.
- src:systemd will shortly not enable networkd unconditionally by
default.
* Drop ifupdown e-n-i configuration files, no longer used.
7 years ago
7f9094170b
remove another straggler udevadm+sleep
7 years ago
03d7dff3ff
Merge lp:~mwhudson/livecd-rootfs/default-netplan-for-server-live
7 years ago
801aad2f77
* Improve teardown_mountpoint to recursively find all submounts and
...
unmount them, instead of working from a hard-coded list. This makes
the code resilient against other submounts being added later, including
downstream.
* Also nuke the sleep / udevadm settle calls in the process, which should
never be required and slow down the builds.
7 years ago
c9ef91e262
Restore the call to 'umount -R $mountpoint' from umount_partition,
...
accidentally dropped in previous upload.
7 years ago
bacde14e41
Also adjust live-build/ubuntu-server/hooks/032-installer-squashfs.binary
...
to use teardown_mountpoint.
7 years ago
83b4f5338c
live-build/ubuntu-cpc/functions: Add teardown_mountpoint to reverse setup_mountpoint
...
* live-build/ubuntu-cpc/functions: Add a function, teardown_mountpoint,
to reverse the work done in setup_mountpoint. Lack of this function
has forced users of setup_mountpoint to implement this separately
and the implementations have diverged. (LP: #1716992 )
* live-build/ubuntu-cpc/functions: Remove umount_settle function.
The was only used where teardown_mountpoint was lacking.
7 years ago
8589d3548f
live-build/ubuntu-cpc/hooks/033-disk-image-uefi.binary: call apt-get
...
update *before* installing packages, not after.
7 years ago
a246300940
* live-build/functions: mount tmpfs on /var/cache/apt and var/lib/apt, so
...
we don't have to leave empty space in our derivative images for packages
that have been downloaded/installed/removed. This normally isn't
relevant for the installed system, since the root filesystem will
auto-expand in place on the target disk, but lets us ship smaller
images.
* live-build/functions: also call 'apt-get update' after mounting the
blank /var/lib/apt.
7 years ago
1676147a84
add some dhcp-on-wired-looking-things default netplan for the server live image
7 years ago
6a42148b22
Mount and unmount /dev recursively, to cope with setups where there are
...
interesting bind-mounts under /dev (e.g. loop devices bind-mounted by
LXD).
7 years ago
fc48e02c37
[tribaal, r=adconrad] Create vagrant user per upstream requirements
...
This branch changes the behavior for default users on the vagrant image,
according to much of https://www.vagrantup.com/docs/boxes/base.html
Specifically, this adds a new "vagrant" user with a know password on top
of the already existing ubuntu user.
This conforms to the expectations of the Vagrant community, despite some
security concerns. Vagrant images are not used for production systems but
for development environments, and the absence of the "standard" vagrant user
has been hurting ubuntu adoption on that platform.
7 years ago
f10cd80ebb
Make sure the .ssh directory has the right permissions.
7 years ago
e798276910
Fixed review comments by Adam.
...
- use adduser instead of useradd.
7 years ago
4d72521491
Fix suppressing kpartx error
7 years ago
3d901daef4
Fix file permission problem - the authorized_keys file was still owned by root since the chown call came before its creation.
7 years ago
e6fd2b657e
Remove ubuntu user customisations.
...
Let's just do the absolute minimum here, the default is what people expect.
7 years ago
eb76178ab5
Support to only generate rootfs via variable (GENERATE_ROOTFS_ONLY).
7 years ago
84da578380
Add IMAGETYPE to support classic image creation by ubuntu-image.
7 years ago
b1432b36be
Don't reference dropped grub_modules variable in grub-install command
7 years ago
87f34122fb
Remove useless diff.
7 years ago
97c8996c29
Remove the useless user and password from default config.
7 years ago
72dbb4c75d
Added comments.
7 years ago
467b8c9c06
Reset the default SSH user to being vagrant.
...
Using "vagrant ssh" is confusing otherwise.
7 years ago
1cc6041cd6
Remove root login. Ubuntu user keeps generated password.
7 years ago
b9363e97fb
Explicitely permit passworded root login over SSH.
7 years ago
c0730ef6f6
Fix typo in variable name.
7 years ago
cc8a6e2709
Turns out the user adding should be done when the chroot is available...
7 years ago
563abee702
Drop special handling of grub modules, adding a note. Modules should be included in the signed grub binaries when necessary.
7 years ago
869bb9808a
Clean up GRUB_MODULES_PRELOAD / grub_modules. Remove the modules already loaded in stock signed grub EFI binaries.
7 years ago
5442860c14
Added a "vagrant" user to the vagrant image build, as per the vagrant community's
...
expectations.
7 years ago
bec201601d
Set a default locale of C.UTF-8 in the cloud images.
7 years ago
8aadf2c73d
Set a default locale of C.UTF-8 in the cloud images.
7 years ago
4f0e9c286c
Drop add_serial_console for upstart.
7 years ago
3b37842219
Use VMDKstream in a more future-proof way
8 years ago
f05a8a238f
live-build/functions: Update path for VMDKstream.py
...
LP: #1706116
8 years ago
cfda7d20bd
Use xz -T4 -0 instead of pxz
...
Test showed very little difference in file-size between -0 and -9 while
both compression and decompression need much less memory and compression
needs less CPU time for -0.
Supported xz versions before 5.2 also accept the -T4 option but ignore it.
Also depend on xz-utils instead of on pxz.
LP: #1701132
8 years ago
726e6192e0
auto/config: enable Debug::pkgDepCache::AutoInstall so tracking down
...
dependency bugs in the livefs is a little clearer.
8 years ago
926b22a834
Merge lp:~rbalint/livecd-rootfs/deps
8 years ago
23d9db863e
Add cm3 as a known ubuntu-core image type. LP: #1698223 .
8 years ago
6c9cf10d72
Depend on pxz and vmdk-stream-converter instead of installing them at runtime
8 years ago
aa54a130c3
Depend on packages in main instead of installing them at runtime
8 years ago
1260f67b8a
Build ubuntu back with tasks. The metapackage switch was due to g++ transition
...
and needed some additional hint. This is adding maintenance and as mentioned
in 2.335, we can revert this.
8 years ago
0d82c84cdf
Update the file based on gilir's feedback
8 years ago
538c89f984
Set correct tasks for Lubuntu
8 years ago
8de300621f
For ubuntu-server images, the live user created by user-setup is 'ubuntu-server', not 'ubuntu'. Fix this so that gettys will start on VTs.
8 years ago
f75be1c606
Resurrect Balint's fix from
...
lp:~rbalint/livecd-rootfs/livecd-rootfs-autopkgtest-fix to wrap kpartx
and trap spurious errors, since the problem is still being seen
intermittently on i386 despite us calling sync before kpartx.
8 years ago
dbba32fae6
For now, make sure all automated image builds are on the edge channel.
...
Eventually we will want to pass the channel as build metadata instead.
8 years ago
4f2c623e27
Use xz to compress ubuntu-image .img files before transfer, so that we
...
have smaller downloads and retain file sparseness everywhere.
8 years ago
d463581569
Merge in lp:~ubuntu-core-dev/livecd-rootfs/zesty-proposed for the changes that landed in zesty but previously missing in livecd-rootfs trunk.
8 years ago
2e21d6d6b1
The ubuntu-server:live should use a casper-based initramfs to work
...
correctly. (LP: #1682460 )
8 years ago
03c991faef
Setup kernel properly for ubuntu-server:live; we *do* want to build
...
kernel-generic and initrd-generic for this image. (LP: #1682460 )
8 years ago
0109d5304e
Optionally use ubuntu-image for building snap based images
8 years ago
f807c3703a
Allow overriding IMAGEFORMAT even for ubuntu-cpc and ubuntu-server
8 years ago
44f9dceeb4
Require PROJECT environment to be set for lb build
8 years ago
ca79c05a23
Merge lp:~rbalint/livecd-rootfs/livecd-rootfs-autopkgtest-fix, w/ modifications
...
Only call sync, don't wrap kpartx and parse its output (doesn't appear to be
needed)
8 years ago
21efeb6795
Work around kpartx's nonzero exit due to "Device or resource busy" errors
...
which still permit kpartx to finally remove loop device (LP: #1684090 ).
Also sync before calling kpartx to let writing to loop devices finish.
8 years ago
e89c54b271
Merge lp:~rcj/livecd-rootfs/trunk/
8 years ago
01b476c0eb
live-build/ubuntu-cpc/hooks/999-extras.binary: Exit on first failure
...
Failure should be quick to eliminate excessive buildd time and make
identification of failure easier (no more buried errors).
8 years ago
166b5eb4b3
ubuntu-cpc/060-ipv6.chroot: remove release comparison (LP: #1681548 )
8 years ago
22ec1d6f6f
Sanitize comments.
8 years ago
94275558de
Make sure variables are exported for run-parts in 999-extras.binary; and drop the unnecessary sourcing of functions.
8 years ago
6272f60665
Merge fixes from rcj.
8 years ago
f8264a59c6
Change remaining CLOUD_IMG_STR references to IMAGE_STR
8 years ago
4e01beda8c
Set IMAGE_STR and FS_LABEL for ubuntu-cpc 999-extras.binary hook too; but also export CLOUD_IMG_STR.
8 years ago
4613a2c82e
Don't outright remove fstab for ubuntu-server:live, that breaks grub-legacy-ec2.
8 years ago
9ed476572f
Resynchronize with parent branch.
8 years ago
46bae4cebf
Fix up functions refactoring tfor a proper path to the file.
8 years ago
ab949fac18
Rename ubuntu-server-live -> ubuntu-server
8 years ago
46fd6c58f5
Refactor functions out of ubuntu-cpc and ubuntu-server hooks.
8 years ago
292c5f300c
De-duplicate functions in ubuntu-server-live; use the file from ubuntu-cpc.
8 years ago
715f13b887
Don't spam with unnecessary login messages; skip login altogether.
8 years ago
2cfa4a9088
Override gettys to wait for the user the press enter, and autologin to the ubuntu user.
8 years ago
e577ed7672
Rename to ubuntu-server-live; some build process fixes.
8 years ago
bf958b1472
Disable cloud-init for the live-session. user-setup will create our ubuntu user via casper.
8 years ago
16eee8d7eb
Use all config hooks from the proper place, not from /build/
8 years ago
7cae48fd12
Source ubuntu-cpc functions from the right place
8 years ago
29f5dc57fd
mkdir must not fail.
8 years ago
6978674cfe
Add cloud-init for subiquity image.
8 years ago
303c7a29ec
Move subiquity systemd service to includes.binary; so that it's copied only on the installer overlay.
8 years ago
86b64ef78e
Move curtin to installer squash.
8 years ago
d5a6f5cbe3
Add 'ubuntu-server-next' subiquity image.
8 years ago
738ff116a5
Merge lp:~vorlon/livecd-rootfs/image-flavors/
8 years ago
f79fc7973c
Add replace_grub_root_with_label function thereby consolidating multiple
...
uses of the same calls to sed. Thanks to Dan Watkins.
8 years ago
7b576e4c4d
Set device_tree_address for the new kernel in the RPi bootloader config.txt
8 years ago
a5cc2033a0
Fix the OVF's metadata to include Ubuntu specific identifiers and
...
descriptions instead of the generic Linux ones. Thanks to Chris Glass.
(LP: #1656293 )
8 years ago
5da94c05e5
Fixed template omission (found wile running a build withthis branch).
8 years ago
b6e7b22680
Rool both switches into one for all affected files (the vagrant file was still
...
doing two switches on $ARCH).
8 years ago
404e524013
live-build/ubuntu-cpc/hooks/061-open-iscsi.chroot: generate iSCSI
...
Initiator Name at first iscsid run for cloud images to ensure it is
unique (LP: #1444992 ).
8 years ago
dc38efa4bd
merge from trunk
8 years ago
60da7e7c43
Also make squashfs skippable with $IMAGE_TARGETS
8 years ago
7fc1da1513
* live-build/ubuntu-cpc/functions: don't call sleep as part of
...
umount_settle; udevadm settle is synchronous and there's no reason to
sleep after it.
* live-build/ubuntu-cpc/functions: umount_partition: don't call
umount_settle for each submount; just unmount them one by one and
settle at the end.
8 years ago
97bc634bd9
vmdk-ova has to key on the vmdk image build
8 years ago
53e1feefdb
Per discussion with Adam, don't make this an LB_ variable since it's not actually part of live-build; instead we will look to pass it into the environment through launchpad-buildd
8 years ago
f04a535b0c
Always export LB_IMAGE_FLAVORS, so that hooks don't complain about unbound variables
8 years ago
6ae9c55227
Fix gratuitous quoting bug
8 years ago
8ba3a00622
Support passing IMAGE_FLAVORS in the environment, to limit which images
...
are output as part of a build; particularly useful for ubuntu-cpc builds
which output multiple image types.
8 years ago
5a07ff4602
Roll both switches on $ARCH into one, as suggested at review.
8 years ago
f1a8538c8e
This branch fixes the OVF's metadata to include Ubuntu-specific identifiers and
...
descriptions instead of the generic linux ones (lp:1656293).
This applies to both the general image and the vagrant-specific one.
8 years ago
f282859477
This branch fixes the manifest generation in OVA files (LP:1627931)
...
The .ova file extension was passed twice, resulting in file not found errors in
both the general case and the vagrant-specific file creation.
8 years ago
1af12f76b7
correct indentation - should be tab not spaces
8 years ago
c85df9e50f
add changes for Ubuntu Budgie build config
8 years ago
4a2d7ecf31
Merge lp:~laney/livecd-rootfs/lp1627190 - don't purge .pyc files any more
8 years ago
67dfdf94a7
ubuntu-cpc: Remove redundant copy of grub files
...
This redundant and file names recently changed. These files will be
put in place by grub-install a few lines below these.
8 years ago
d43c01c60b
Update the ubuntu-touch hints to try installing ubuntu-system-settings instead of ubuntu-system-settings-online-accounts.
8 years ago
d7eecc3805
live-build/auto/config: Don't remove .pyc files any more - we don't care
...
*that* much about the small space gain these days, and would prefer the
speed win. (LP: #1627190 )
8 years ago
bbc880716d
Update the 00-uid-gid-fix.chroot_early hook for touch to include the new known good bootstrap hash values.
8 years ago
1d71b6d5ab
Use the virtual kernel for the arm64 cpc images instead of generic.
8 years ago
95d4c0b767
Use the virtual kernel for the powerpc64 cpc images (LP: #1625368 )
8 years ago
d747399c64
Temporarily change the 60-install-click.chroot script to pull in clicks for
...
arm64 builds from a different location for ubuntu-touch.
8 years ago
8855f05191
live-build/ubuntu-cpc/hooks/042-vagrant.binary: fix unmount handling
...
so that the teardown is done properly /before/ we try to make an
image from our filesystem, since otherwise /etc/resolv.conf is broken.
LP: #1621393 .
8 years ago
d4dd5b3a8a
* live-build/ubuntu-core/hooks/01-setup_user.chroot:
...
- do not create "ubuntu" user for ubuntu-core anymore, the
* live-build/ubuntu-core/hooks/02-add_user_to_groups.chroot
- dropped
8 years ago
5f9521d65f
do not create "ubuntu" user for ubuntu-core anymore, the
...
console-conf package will create this user now
8 years ago
15d147bcdb
Add replace_grub_root_with_label function
...
When update-grub is run, it will detect the disks in the build system.
Currently, we sed the grub configuration in places where this happens;
replace_grub_root_with_label moves that seddery in to a single callable
location to avoid ending up with multiple versions of it.
(It's worth noting that we also do this in 999-cpc-fixes.chroot, but as our
functions file isn't available within the chroot we don't use it there.)
8 years ago
e40e563cb8
live-build/auto/build: Fix typo in netplan policy snippet.
...
*brown paperbag* (LP: #1615180 )
8 years ago
3c3737327f
live-build/auto/build: Move NetworkManager configuration to the right
...
place.
8 years ago
d9ce44d73a
live-build/auto/build: If the image pre-installs network-manager, let it
...
manage all devices by default by shipping a default netplan policy.
Installing NM on an existing system only manages wifi and wwan, to avoid
interfering with networkd managed devices on existing server/cloud
instances.
8 years ago
1060aac86d
* live-build/ubuntu-core/hooks/400-create-apt-get-warning.binary
...
- use echo to display the error, thanks ogra for pointing that out,
update the string also to use the new snappy command naming
8 years ago
8ec2912420
Create a desktop entry and some mimetype associations for xdg-open in
...
ubuntu-core. That way interacting with web, email and documentations
urls in a snap should do the right thing.
8 years ago
f78de9a3c7
* live-build/ubuntu-core/hooks/400-create-apt-get-warning.binary,
...
500-create-xdg-wrapper.binary, 700-classic-dir.binary:
- Correct some syntax errors in the ubuntu-core snap hooks.
8 years ago
15b69c4ddf
Install nplan in the ubuntu-core image.
8 years ago
b268d90538
Merge lp:~tsimonq2/livecd-rootfs/lubuntu-next-image
8 years ago
0a141763ce
* live-build/ubuntu-touch/includes.chroot/etc/lightdm/
...
lightdm.conf.d/90-phablet.conf:
- Don't have Touch greeters show a guest session. Touch isn't ready
for non-phablet users yet nor a multi-user greeter.
8 years ago
5c11231392
Create a desktop entry and some mimetype associations for xdg-open in
...
ubuntu-core. That way interacting with web, email and documentations urls
in a snap should do the right thing.
9 years ago
da28a130be
update hook comment to match the content
9 years ago
377b075dcc
escape $1 variable in the xdg script where needed
9 years ago
2dd9d8a055
Correct some syntax errors in the ubuntu-core snap hooks
9 years ago
4040816ca7
Add Lubuntu Next image
9 years ago
9efc4f0f70
Merge lp:~semiosis/livecd-rootfs/fix-for-1565985
9 years ago
802e65f885
remove unnecessary virtualbox-guest-dkms package from vagrant image builder
9 years ago
418501bc65
slightly adjust the version handling for the core snap, drop suffix from kernel snap version string
9 years ago
f6058dfdb4
sanitize the version number of the ubuntu-core snap
9 years ago
213c3b317c
updated per Steve Langasek's feedback:
...
- put umount in trap
- wrap comment lines at 78 chars
- remove unnecessary DEBIAN_FRONTENT env var from apt-get lines
9 years ago
85d3b5fdaf
remove comment from vagrant script
9 years ago
0eac70b33e
[ Louis Zuckerman ]
...
* Fixes for vagrant box builder in ubuntu-cpc LP: #1565985
* Remove extra packages added on 24 Jun 2016 except virtualbox-guest stuff
* Add cloud-init config to manage /etc/hosts for localhost
9 years ago
2616af2baf
[ Louis Zuckerman ]
...
* Merged the following changes from upstream
[ Łukasz 'sil2100' Zemczak ]
* Remove the ubuntu-pd project from the scripts
* Add instead an ubuntu-touch-custom project for custom re-builds of
ubuntu-touch
[ Daniel Watkins ]
* Consolidate cloud images
- Remove .tar.gz and .tar.xz (removed in favour of the squashfs).
- Remove the MBR-only disk image in favour of the shared GPT/MBR UEFI
image.
- Remove '-disk1' from bootable image names.
[ Phil Roche ]
* Removed HWCLOCKACCESS=no from /etc/default/rcS (LP: #1581044 )
9 years ago
9608064276
ubuntu-pd is dead, long live ubuntu-touch-custom - introduce a new project ubuntu-touch-custom that is exactly the same as ubuntu-touch but uses a separate cdimage project (separate builder space).
9 years ago
40fd3c6534
Merge lp:~cloudware/livecd-rootfs/image-consolidation
9 years ago
cad69acf05
fixes for vagrant box builder in ubuntu-cpc
9 years ago
cbbcb721a4
Ubuntu MATE seeds now follow Recommends:
9 years ago
b3cc872df5
Swap order of security and updates in dvd sources.list.
9 years ago
da54fe4c3e
Fix security mirror sources.list entries for non-x86 architectures.
9 years ago
50f5c6cd18
fix 500-create-xdg-wrapper.binary and 700-classic-dir.binary extensions
9 years ago
319e3668b9
[cpc][ppc64el] apt-get update before installing grub2
9 years ago
d97134679d
Removed HWCLOCKACCESS=no from /etc/default/rcS
...
HWCLOCKACCESS=no in /etc/default/rcS is no longer required and prompts a confirmation
dialog on upgrade. (bug 1581044)
9 years ago
c1a36eb3cd
Don't ignore failures to find a base VMDK for OVAs
...
We should always build them, and treat them not existing as a failure.
9 years ago
dd9cf219c7
Create a VMDK image on i386
9 years ago
fe81277a0f
Continue producing non-UEFI images on non-UEFI arches
9 years ago
0a8a704b0b
Remove '-disk1' from bootable image names.
9 years ago
1fd54c49ee
* Consolidate cloud images
...
- Remove .tar.gz and .tar.xz (removed in favour of the squashfs).
- Remove the MBR-only disk image in favour of the shared GPT/MBR UEFI
image.
9 years ago
698283d1c4
rename var/lib/snapd/classic->var/lib/snapd/hostfs
9 years ago
6c5dc72d80
Merge lp:~daniel-thewatkins/livecd-rootfs/enable-backports
9 years ago
460d363b84
fix corename
9 years ago
45dd439f68
add var/lib/snapd/classic in ubuntu-core
9 years ago
8940890039
Remove some trailing spaces
9 years ago
79cf11a25a
Use the correct (pre-xenial) universe sources.list comment
9 years ago
407cd3b812
Replace sources.list generated using COMPONENTS with the sources.list from
...
an Ubuntu Server installation (i.e. with all components enabled, and all
deb-src lines commented).
9 years ago
f83f033060
Update post-debootstrap hashes for ubuntu-touch.
9 years ago
e9c7cee3de
revert the renaming from ubuntu-core to core for the os snap until snapd is ready for this
9 years ago
0ffbd3a7cc
drop "execution" from os snap description
9 years ago
2db1eb2155
rename the ubuntu-core snap to simply be "core"
9 years ago
8cd6c20291
Move touch resolution hints to a HINTS variable, and adjust for use
...
on dual-stack gl/gles arches where things don't quite work right.
9 years ago
1463239cb2
Stop explicitly removing systemd-sysv for touch.
9 years ago
b38412b4ed
adjust motd message on snappy
9 years ago
e690e4bdf7
[CPC] Don't overwrite the default sources.list
...
We've received a request not to do so (LP: #1513529 ) and cloud-init applies it
(or something similar to it) at boot anyway, so the list we're putting in place
isn't generally used.
9 years ago
863c46941a
rename com.canonical.UrlLauncher -> com.canonical.SafeLauncher
9 years ago
8a5032e26e
live-build/ubuntu-core/hooks/500-create-xdg-wrapper: rename to com.canonical.UrlLauncher
9 years ago
56e798bcbd
add u-boot-tools to all snappy arches, drop flash-kernel from snappy, create /boot/uboot dir on all snappy arches and configure /etc/fw_env.config
9 years ago
d436f951c3
system-image: add /usr/local/bin/xdg-open dbus helper
9 years ago
d617d8f840
update kernel snap building to match the new kernel policy
9 years ago
baf4f47379
Drop special-casing of ubuntu-core:system-image in places, now that
...
ubuntu-core unambiguously refers to the snappy Ubuntu Core image.
9 years ago
8b79962b99
Rename old ubuntu-core tarballs to ubuntu-base to avoid confusion.
9 years ago
1a5f9bc338
Add the new dhcpd user introduced by latest archive changes.
9 years ago
15ed930293
add meta/kernel.yaml to the kernel snaps
9 years ago
6bd3aaffc1
drop linux-firmware-raspi2 from snappy
9 years ago
0b1c0642f7
add multiverse to sources.list for snappy kernel builds
9 years ago
03f89315cc
add multiverse to sources.list for snappy kernel builds
9 years ago
e5142015a3
Fix syntax error.
9 years ago
8d145b4d43
move the snappy kernel builds to the correct linux-image-$arch and linux-firmware-$arch metapackages
9 years ago
4eae5fbf1d
Follow linux-firmware-raspi2 renaming in the archive for raspi2 images.
9 years ago
d136431dd5
Follow up on recent changes from the new network-manager packages and add the nm-openvpn user to touch. This should essentially fix the image build failures.
9 years ago
8fa28215c8
Update the passwd, shadow, group and gshadow bootstrap hashes for touch.
9 years ago
2c27aab38c
Re-enable systemd predictable interface naming in cloud images
9 years ago
6340e292d6
Don't configure the eth0 interface by default
...
In xenial, eth0 won't exist (as we've moved to systemd's predictable interface
naming), and even were it to exist, cloud-init would handle configuring it on
boot.
9 years ago
57c110d861
Transition from ubuntu-snappy to ubuntu-core-snapd-units and snapd.
9 years ago
dbcbcfaf7c
live-build/ubuntu-cpc/hooks/032-disk-image.binary: Install s390-tools
...
and sysconfig-hardware before we attempt to configure zipl.
9 years ago
814311e826
snappy: make ppc64el and s390x os tarball builds work
9 years ago
62b25a47f2
kill the snappy os build if the initramfs-tools-ubuntu-core package is not found
9 years ago
e7723219a3
switch snappy package builds from "snappy build" to "snapcraft snap" (LP: #1557515 )
9 years ago
4d25373897
live-build/ubuntu-core/hooks/25-create-generic-initrd.chroot create a generic initrd inside the snappy os-snap
9 years ago
ec84072284
Merge powerpc fixes from Daniel Watkins
9 years ago
2909aba4b5
Enable building of powerpc cloud images.
9 years ago
5ac47abce7
Remove obsolete pvr-omap4 special-casing to simplify configs.
9 years ago
24d78ecf5f
fix cloud-init breaking snappy networking on boot (LP: #1563296 )
9 years ago
0fbe88364f
Changing upower configuration to use percentages and poweroff the device when the critical battery level has been reached
9 years ago
16f26af920
make the /etc/mtab link relative in snappy (LP: #1547033 )
9 years ago
66c472388c
move mtab link to point to /proc/self/mounts instead of /proc/mounts in snappy images
9 years ago
60c9b694c4
adjust snap versions to only have one dash and use plus chars instead
9 years ago
c5905d18b6
add link for wlan mac address in dragonboard kernel snaps, move dragonboard kernel snap to linux-snapdragon
9 years ago
af517f422a
Follow rename of ubuntustudio-font-meta to ubuntustudio-fonts.
9 years ago
753bd8acd0
remove grub-efi-arm64 to the arm64 OS snap as it breaks uboot
9 years ago
eba875e96c
add support for dragonboard kernel snap
9 years ago
b6eae423cd
Move the new touch click apps (unav, dekko, calendar) to the custom tarball.
9 years ago
d77a731d63
Build raspi2 images with multiverse for firmware.
9 years ago
f94b5db6e3
add grub-efi-arm64 to the arm64 OS snap
9 years ago
5439a48096
add dpkg.list to assets of the kernel snap
9 years ago
9a9e8685f9
add snap building for kernel snaps
9 years ago
768445efda
adjust naming to something easier consumable for cdimage of os snap in snappy builds
9 years ago
6d4209f62c
add .snap cration for ubuntu-core snappy rootfs builds
9 years ago
1865c71a24
Remove the manta device from the list of touchsubarches as we're not building its kernel anymore.
9 years ago
f7c5d2ac50
Update the debootstrap group and gshadow hashes for ubuntu-touch.
9 years ago
f3d90d962f
live-build/ubuntu-cpc/hooks/042-vagrant.binary: scope serial device for
...
Virtualbox only.
9 years ago
d570ecdcb8
Refactor ubuntu-cpc hooks to hard-code producing an 'ext4' rootfs, which
...
is used outside of the livecd-rootfs build process (specifically for EC2
publication).
9 years ago
eff40b8e5d
live-build/ubuntu-cpc/hooks/042-vagrant.binary: add serial device for
...
Vagrant images (LP: #1546108 ).
9 years ago
6f6fb2834b
Refactor ubuntu-cpc hooks to hard-code producing an 'ext4' rootfs, which
...
is used outside of the livecd-rootfs build process (specifically for EC2
publication).
9 years ago
4bf82391aa
add /var/lib/systemd/rfkill to pre-created snappy dirs
9 years ago
cbbb38a364
Add net.ifnames=0 to the raspi2 cmdline injected into raspi2 builds.
9 years ago
8b77178bc5
live-build/ubuntu-cpc/hooks/999-cpc-fixes.chroot: Add fake_cloud_init
...
function to create a nocloud data source for cloud images that aren't
meant to be used on real clouds and use it by default on armhf+raspi2
9 years ago
1d428db1ab
Switch to passing the raspi2 boot options entirely via cmdline.txt to match the latest flash-kernel change
9 years ago
a545002b7c
Mark boot partitions as type vfat
9 years ago
b1099d2a64
Import live-build/ubuntu-cpc/hooks/raspi2/mkknlimg from
...
https://github.com/raspberrypi/linux/blob/rpi-4.1.y/scripts/mkknlimg
and use it to install a bootable uboot.bin.
9 years ago
65f74a021d
Drop gratuitous call to dpkg
9 years ago
a92bf11406
Initial support for raspi2 subarch.
9 years ago
246d45c839
And one more
9 years ago
c62743e5f4
...but if we're going to avoid using umount_partition, we need to actually unmount all the mountpoints mounted by setup_mountpoint
9 years ago
93314b5882
and the parent directory isn't a mountpoint, so roll back a change that also causes the script to fail. This still warrants refactoring, but let's refactor it in a way that actually works.
9 years ago
c53b727a79
But don't try to use the function without declaring the function...
9 years ago
7339cb09b3
Remove some code duplication
9 years ago
0b279f731b
Refactor ubuntu-cpc hooks to always produce a 'plain' rootfs via
...
live-build and reuse this for the tarball, instead of lb_binary_rootfs
creating some artifact that we ignore / throw away.
9 years ago
375554f157
* Chroot to execute zipl, because it's nice.
...
* Use the right loop device to install zipl onto.
9 years ago
8f825a91c9
* Correct initrd.img symlink, kernel/hooks should actually produce the
...
right thing here, but meh.
* Chroot to execute zipl, fails to boot otherwise.
9 years ago
6bd644f252
Revert change that adds a *sixth* argument to create_empty_partition; this can't possibly be the cause of whatever problem was being seen
9 years ago
28c10e02db
ubuntu-cpc: in hooks/030-root-tarball.binary create /lib/modules to fix
...
(LP: 1543204).
9 years ago
21b502d78c
Do not remove linux-base, when purging all the linux-*, in the tarball
...
build. Otherwise ubuntu-minimal is removed, and things get crazy.
9 years ago
ba1b657624
ubuntu-cpc: fix hooks/032-disk-image.binary call to
...
create_empty_partition, which requires five args due to "-u"
9 years ago
90fc765551
set -u damage
9 years ago
e51a8f8aef
Make sure we still mount the kernel filesystems in the disk setup
...
We skip the previous unmount/remount behavior because that makes things
unwieldly when there are multiple partitions; but we still have setup to do,
so that /dev is available for grub, etc.
9 years ago
eb9b43defe
Don't forget to mark our root partition bootable
9 years ago
e9d31ea96a
Fix some thinkos in the loop device name handling
9 years ago
4594c28c1f
More set -u damage
9 years ago
83d2176957
chroot hooks are special, they don't get the environment because it gets scrubbed by rootcmd; so we have to call dpkg --print-architecture after all
9 years ago
b9f96f5682
set -u is a hateful thing
9 years ago
0be484d35e
Add support for actually mounting the boot partition and copying contents to it
9 years ago
24b9feb58a
further refactoring of partition handling
9 years ago
6fce3b879d
-> in a few overlooked places
9 years ago
99cdaafd61
Refactor ubuntu-cpc hooks to allow us to handle images where the root
...
partition should not be partition 1.
9 years ago
7ec8dd87ac
Fix architecture handling in hooks. We know we're always being invoked
...
from a launchpad-buildd-like setup, which passes ARCH and SUBARCH in the
environment, because auto/config and auto/build both rely on this. So
don't scatter dpkg --print-architecture calls throughout, especially
when many of these are not cross-build-aware.
9 years ago
cb58e88614
If a subarch is specified for a cloud image build, don't build rootfs
...
artifacts; these should come from the 'generic' build.
9 years ago
691a0ca08f
Add hooks to ubuntu-cpc to divert /bin/sync in the chroot and undivert it
...
at the end. This is a general-purpose change that should be applied to
all flavors and archs, but at the moment it's only needed on armhf+raspi2
to work around the raspberrypi2-firmware postinst calling sync, which is
actually warranted in the normal case.
9 years ago
487a0a403c
Change real name for phablet user to 'Ubuntu'
9 years ago
a5ee888d1b
ubuntu-cpc: add missing net.ifnames=0 for ppc64el disk images.
9 years ago
8e20e4b169
Refactor some non-idiomatic architecture handling in
...
live-build/ubuntu-cpc/hooks/999-cpc-fixes.chroot
9 years ago
ca800e778b
* ubuntu-cpc:
...
- fixed loop setup due to change of kpartx output
- only use grub-install logic for Intel architectures
9 years ago
4f55631a9f
Refactor/reorder ubuntu-cpc support for consistency with other flavors,
...
so that subarch overrides can be applied correctly.
9 years ago
9e06b90ead
* ubuntu-cpc:
...
- exclude s390x from should_install_grub
9 years ago
538192d3f4
Make a variable because Saviq likes variables
9 years ago
39eb02ea86
Use Ubuntu as phablet user's real name
9 years ago
06ce71492b
auto/build: copy kenrel chroot dpkg.list to assets dir
9 years ago
51a5cca323
* ubuntu-core:
...
- include the dpkg.list in the device tarball
- store /usr/share/snappy/dpkg.list manifest on the OS tarball
9 years ago
414cbec4dc
Specify a regex to run-parts so that cloud image extra scripts are found
...
and executed.
9 years ago
e3d6d5dc9f
Set timeout options so ppc64el cloud images don't display a grub boot
...
menu (matching the behaviour of other cloud images).
9 years ago
ece1f6ccab
Install grub in ppc64el cloud images so they are bootable (LP: #1538610 )
9 years ago
8ff658da8d
Remove unneeded packages from the root.tar.{gz,xz} cloud image targets
...
(LP: #1534764 ).
9 years ago
fdd9a3e716
Remove unneeded packages from the root.tar.{gz,xz} cloud image targets
...
(LP: #1534765 ).
9 years ago
cf2e1f3cdc
Produce OVA files for i386 cloud builds
9 years ago
c6440fdfe5
Enable building of s390x cloud images.
9 years ago
9a3b3d6280
* live-build/ubuntu-core/hooks/11-remove-extra-packages.chroot:
...
- remove libicu52 hook
9 years ago
0011e92391
Fix the invalid path for the error message in 00-uid-gid-fix.chroot_early for ubuntu-touch.
9 years ago
05f661be29
Fix earlier mistake of changing the wrong hashes.
9 years ago
bcfda67527
Update the passwd/shadow db hashes on ubuntu-touch builds
9 years ago
1124ea4776
also add the new apt user to /etc/passwd in snappy
9 years ago
499779097f
update /etc/shadow on snappy for new apt user
9 years ago
5a84144a9b
* ubunut-cpc:
...
- extendend hooks/functions to support creation of derivative images
including mounting images.
- added the ability to create qcow2 images in hooks/functions
- simplified loop clean-up in hooks/functions
- removed assumption that disk1.img would be built
- switched qcow2 generation to use hooks/functions function
9 years ago
ef219ff9ee
configure /etc/fw_env.config for all arm arches on snappy
9 years ago
74633563d8
make sure u-boot-tools is installed on snappy arm64
9 years ago
93f112e8e8
make sure the default group is still created when adding the default user to adm and sudo groups
9 years ago
421269a732
ubuntu-cpc: clean up qcow2 image builds
...
- use convert_to_qcow2 to create the qcow2
- remove assumption of disk1.img existing
9 years ago
c6077abaab
ubuntu-cpc: create VMDK's for disk images if they exist. Remove
...
assumption that disk1.img will exist.
9 years ago
5b08080057
ubuntu-cpc: only execute first level executables in the extra hooks
...
directory
9 years ago
7853f8b318
ubuntu-cpc:
...
- added ability to create derivative images
- added function to convert images to qcow2
- cleaned up the loop clean up logic
- added function to umount and settle devices
9 years ago
c97c00d749
manually merge upload of 2.359
9 years ago
fb84e38cf2
* live-build/ubuntu-core/hooks/01-setup_user.chroot:
...
- add default ubuntu user to "adm" and "sudo" groups
9 years ago
3b7c4b69f4
Fix the previous apt list removal hook. This hook needs to be .binary as otherwise we're still left with apt lists when the image is published.
9 years ago
2f1831ed07
Fix typo in ubuntu-cpc preventing non-intel builds.
9 years ago
6a39712da0
merge lp:~utlemming/livecd-rootfs/additional-cloud-targets to add Vagrant, OVA, VMDK and squashfs cloud image generation to livecd-rootfs
9 years ago
2a0b654138
Upgrade passwd, group and gshadow hashes for latest builds.
9 years ago
dd371c4a69
* added additional CPC build targets:
...
- added manifest generation for squashfs and root.tar.gz
- added VMDK generation
- added OVA generation from VMDK's
- added generic Vagrant image generation
9 years ago
1855130ecc
Pre-merge commit
9 years ago
7ccc9cb706
fix input group on snappy
9 years ago
dd4f845255
do not ship assets/dtbs/overlays in raspi2 tarball, it breaks ubuntu-device-flash
9 years ago
48a08042ed
Fix
9 years ago
2b818e8475
Restrict Vagrant size
9 years ago
4a752e14c0
Use standard tools for resize
9 years ago
9a87b066cf
Comment fixup
9 years ago
e931fbeaa5
ubuntu-cpc: move vmdk creation code into common funtion to support Vagrant Box builds
9 years ago
d301f2a532
ubuntu-cpc: add ability add arbitrary hooks for extending builds
9 years ago
467619d1a1
ubuntu-cpc: generate Vagrant images
9 years ago
e96df0c156
ubuntu-cpc: generate OVA images.
9 years ago
92f63b3e6b
ubuntu-cpc: added OVF templates for generating OVA and Vagrant Images
9 years ago
b31233589e
ubuntu-cpc: generate VMDK disks
9 years ago
bc5dbaaca5
ubuntu-cpc: generate squashfs based on the rootfs tarball
9 years ago
e4553137ac
ubuntu-cpc: generate manifest for root tarball
9 years ago
a40cfd6180
ubuntu-cpc: Move apt-get to the top of uefi disk creation
9 years ago
5bc78bede3
add raspi2 device tarball creation. separate snappy device tarball builds completely from the rootfs. drop old way of in-tree device tarball creation for snappy
9 years ago
b632fd0492
drop input group from snappy images, adjust md5 sums in live-build/ubuntu-core/hooks/00-uid-gid-fix.chroot_early
9 years ago
216762748b
Move building of all architecture-specific CPC artifacts in to
...
Launchpad.
9 years ago
49f1896c8d
live-build/auto/config: add note about seeding
9 years ago
46d1138e5a
* live-build/ubuntu-core/hooks/21-snappy-security-policy-stamp.chroot:
...
- create a /usr/share/snappy/security-policy-version so that
snappy can re-generate the security profiles if any of the versions
of apparmor or ubuntu-core-security-* changes
9 years ago
60a523d216
Cloud Images: disable new NIC naming convention (LP: #1510345 ).
9 years ago
81edee0431
fix handling of writable files in /etc/default for snappy
9 years ago
952fa460d4
fix tss UID in snappy (landing can wait for xenial)
9 years ago
912e02dc1e
do not hardcode installation of grub-pc for amd64 in snappy images, instead install the right grub set for secureboot there
9 years ago
0054a24f90
limit grub-install diversion on snappy images to x86 architectures
9 years ago
cc7950e55c
divert grub-install on snappy images during rootfs build
9 years ago
0bceb09c4b
The apt lists removal hook needs to be for the binaries.
9 years ago
1c00dc358f
merge lp:~sil2100/livecd-rootfs/remove_apt_lists
9 years ago
8d737ad1c9
add user/group fixes for snappy shipping tpm-tools
9 years ago
47d0469af5
Add hook that removes all apt lists for ubuntu-touch images. Our apport now works without them on the read-only images and this way we can save up some space.
9 years ago
fe696a8bb9
merged lp:~sil2100/livecd-rootfs/pocket-desktop
9 years ago
a559b98c8b
Install the meta package as part of one add_package install call.
9 years ago
57f0507518
As suggested by Colin, first add the meta packages, then the other deps.
9 years ago
e0fcd94074
Switch to the project approach, add a symlink for the hooks
9 years ago
5907a20a56
Fix indent
9 years ago
a382f7e64a
Drop 'landscape-client' from Cloud Images (LP: #1497030 ).
9 years ago
e4744f68ce
Ok, again try convincing people that using a subproject here is the way to go...
9 years ago
5f8d6e06de
live-build/ubuntu-touch/hooks/03-etc-writable.chroot: Set up /etc/whoopsie
...
too. (LP: #1437633 )
9 years ago
6813f1c965
add empty "extrausers" equivalents for subuid and subgid files, else adduser falls over in interactive mode when trying to write to them
9 years ago
5d6faa5c6f
ubuntu-touch, ubuntu-desktop-next: drop systemd-journal-remote from group files, update md5sums in 00-uid-gid-fix.chroot_early
9 years ago
0601725f85
add ppp and watchdog to snappy image
9 years ago
20ccbbb944
releasing package livecd-rootfs version 2.340
9 years ago
c2407a6679
* live-build/ubuntu-core/hooks/500-move-kernel-to-device-tar.binary:
...
- cleanup further after moving the kernel out of the rootfs
(LP: #1468469 )
9 years ago
5e6b64e039
drop copying of zip files of the android package, we do not generate these anymore
10 years ago
93deed0c3a
revert the debugging code in the apparmor cache generation, touch the cache files to sanitize the timestamps
10 years ago
ec1b6f24ae
add the apparmor-super-noise change to get extra detailed info about all apparmor operations in the ubuntu-touch build logs
10 years ago
48faa53d7b
merge lp:~sil2100/livecd-rootfs/deb-src_for_extra_ppas to include deb-src lines for extra ppa sources.list entries
10 years ago
3f8e2ee18e
make apparmor profile generation more verbose to get more log info
10 years ago
751153543a
merge change for 2.335 from the archive
10 years ago
23341f3670
add dnsmasq user to snappy builds, needed by ubuntu-fan
10 years ago
133addd590
live-build/ubuntu-core/hooks/16-ensure-uboot.chroot: we need to go into redundEnv mode to get the 5byte header that uboot uses by default, don't ask why
10 years ago
4d2b68630d
its /etc/fw_env.config
10 years ago
b3b321ea92
create fw_env.conf on armhf so that fw_{set,print}env works
10 years ago
50e0f20c69
Get previous ubuntu-core changes on desktop-next
10 years ago
0d7da3cc2c
merge lp:~sergiusens/livecd-rootfs/eth0Not to not hardcode eth0 anymore on snappy
10 years ago
572da9cdec
fix another quoting issue in snappy
10 years ago
cf35d19929
Merge lp:~sil2100/livecd-rootfs/remove_youtube_scope
10 years ago
0805723ed1
fix quoting issue with the last change
10 years ago
fac57fb6c6
Using versioned kernel and initrd for generating assets and removing uneeded files from the device part
10 years ago
68b8470200
snappy: install libc6:i386 on amd64 images for multiarch support out of the box. (LP: #1444049 )
10 years ago
3b4f42857b
Removing creation of eth0 file now that it is not deterministic to be the ethernet device on the system
10 years ago
5e3ce6bece
* live-build/ubuntu-touch/includes.chroot/etc/lightdm/lightdm.conf.d/
...
90-phablet.conf:
- don't use deprecated "[SeatDefault]" syntax
* live-build/ubuntu-desktop-next/includes.chroot/usr/share/lightdm/
lightdm.conf.d/90-desktop-next-autologin.conf:
- let desktop-next autolog to the ubuntu user session
10 years ago
b09e00ce86
Revert unwanted change included in the previous upload
10 years ago
ec055144e7
* live-build/ubuntu-desktop-next/hooks/11-remove-extra-packages.chroot:
...
- remove click from desktop-next
10 years ago
92a84da7df
* live-build/ubuntu-desktop-next/hooks/00-uid-gid-fix.chroot_early:
...
- updated for the previous group changes
10 years ago
4e72259593
Copied some touch tweaks (n-m config and user groups) to desktop-next
10 years ago
cb31811ce8
Split out the youtube scope to the custom tarball since some images can't have it pre-installed (e.g. arale China images).
10 years ago
bec5e3ea81
rename clickpkg -> snappypkg
10 years ago
6c641f01d2
[ Sergio Schvezov ]
...
removing debian packaging artifacts from the image
10 years ago
6170d6a92b
copy set locale hook from core to desktop-next
10 years ago
9e312edd32
why did desktop next ever build for azure?
10 years ago
c3b8dc32b1
Remove walinuxagent
10 years ago
53dcbdad2b
Removing debian assets from the final image
10 years ago
95a961d6f1
* live-build/ubuntu-desktop-next/hooks/00-uid-gid-fix.chroot_early:
...
* live-build/ubuntu-desktop-next/hooks/10-remove-documentation.binary:
- don't remove the copyright and manpages on desktop
10 years ago
2667aa6305
allow install of "multi" click packages in 60-install-click.chroot on ubuntu-touch
10 years ago
5fa4811051
* live-build/ubuntu-core/hooks/00-uid-gid-fix.chroot_early:
...
- copy touch hacks to create needed userdirs (lightdm & usermetrics),
the users are added by the script and not the usual postinst so their
uderdirs are not created as they should
10 years ago
eb41638781
* live-build/ubuntu-desktop-next/includes.chroot:
...
- copy ubuntu-core's include for /etc/hosts and resolv.conf config
10 years ago
e5923e7135
* live-build/ubuntu-desktop-next/hooks/20-extra-files.chroot:
...
- create other needed directories
10 years ago
f34c4faf70
* live-build/ubuntu-desktop-next/hooks/20-extra-files.chroot:
...
- create /writable otherwise the mounts job fail and block the boot
10 years ago
1116e3b439
* live-build/ubuntu-core/hooks/500-move-kernel-to-device-tar.binary,
...
live-build/ubuntu-desktop-next/hooks/500-move-kernel-to-device-tar.binary,:
- deal with vmlinuz .signed when copying kernels
10 years ago
26fcda4616
Set kernel flavours variable to try to fix amd64 build
10 years ago
e51446f712
remove trailing tab
10 years ago
6b7611c6e3
ubuntu-core-system-image: fix indentation
10 years ago
c50bcc7160
Revert symlink changes, that creates build issues, copy updated hook
...
to the desktop-next directory instead
10 years ago
1f3dfce9e9
Symlink some desktop-next hooks to ubuntu-core to avoid duplication
10 years ago
7245efa89f
* live-build/ubuntu-core/hooks/500-move-kernel-to-device-tar.binary:
...
- ignore /vmlinu?, /initrd.img symlinks when building the boot assets
10 years ago
904873a8bf
Updates users and groups for desktop next
10 years ago
26012cb9ef
Don't add a docker group to desktop next
10 years ago
408af9a405
Updated user/groups config for the desktop-next
10 years ago
036bf55f06
Copy desktop-next hooks in the configuration
10 years ago
f127f1ac73
Remove duplicated code leftover in the previous desktop-next changeset
10 years ago
89dddd357a
revert r1120,r1121 and do not pre-generate the apparmor cache during live-build
10 years ago
293cd5e802
live-build/ubuntu-core/hooks/90_precompile-apparmor.chroot: remove apparmor_parser '-M' option
10 years ago
605fec8877
* live-build/ubuntu-core/hooks/90_pecompile-apparmor.chroot:
...
- generate /etc/apparmod.d/cache files during image build to
avoid out-of-sync issue with profiles and cache (LP: #1460152 )
10 years ago
b79dcfc1b7
Experimenting transforming ubuntu-desktop-next to a system-image base
10 years ago
6a4ad0b3bc
also add /lib/firmware to the dirs we pre-create on touch and core
10 years ago
f8ad795e55
create mtab, /lib/modules and writable mountpoints on touch and core
10 years ago
7bb4d3ae8a
drop grouper from touch
10 years ago
Steve Langasek
Balint Reczey
Michael Hudson-Doyle
Gary.Wzl
Dimitri John Ledkov
Robert C Jennings
Colin Watson
Adam Conrad
Christopher Glass
Mathieu Trudel-Lapierre
Didier Roche
Simon Quigley
Brian Murray
Nish Aravamudan
David Mohammed
Iain Lane
Łukasz 'sil2100' Zemczak
Michael Vogt
Daniel Watkins
Martin Pitt
Sebastien Bacher
Michael Terry
Louis Zuckerman
Oliver Grawert
Martin Wimpress
Phil Roche
Iain Lane
Xavi Garcia Mena
Ben Howard
Ben Howard
Sergio Schvezov
Didier Roche