Imported using git-ubuntu import.
Changelog parent: d5c11a1621
New changelog entries:
[ Ante Karamatić ]
* Add cloud-live project to livecd.sh and BuildLiveCD.
[ Jonathan Riddell ]
* Replace kubuntu-mobile with kubuntu-active
* Remove kubuntu-netbook, now just part of kubuntu-desktop
Imported using git-ubuntu import.
Changelog parent: b3cb11f199
New changelog entries:
* Build Lubuntu with --no-install-recommends, to match its seed structure
(LP: #918401).
Imported using git-ubuntu import.
Changelog parent: fcc9b0a0b6
New changelog entries:
* Remove the x-loader packages from omap and omap4 flavours, as they
are now using the MLO provided by their respective u-boot packages.
* Add zram-config to the ac100 subarch to replace the installer hack.
Imported using git-ubuntu import.
Changelog parent: a6e1b5a61d
New changelog entries:
* live-build/auto/config: Fix support for ubuntustudio-dvd project.
Imported using git-ubuntu import.
Changelog parent: ca831414fd
New changelog entries:
[ Adam Conrad ]
* Update maintainer to Ubuntu Developers, LaMont doesn't upload much.
[ Colin Watson ]
* Get live-build to divert update-initramfs while building the chroot.
This should cut a few minutes off builds, particularly on slow
architectures.
Imported using git-ubuntu import.
Changelog parent: 4e1df5e183
New changelog entries:
* Fix sense of live/preinstalled change in 2.46; add the live task for
non-preinstalled images, rather than only for preinstalled images.
Imported using git-ubuntu import.
Changelog parent: 2bec67407a
New changelog entries:
* Guard legacy cloop code in a [ -f ], so it stops failing.
* Don't add the LIVE_TASK for any PREINSTALLED images.
Imported using git-ubuntu import.
Changelog parent: 312f12ef26
New changelog entries:
* Mirror armel support as armhf, so we can build all the same images.
* Allow ARCH to be specified on the BuildLiveCD command line as -A,
so that it doesn't have to be hardcoded for non-native builders.
Imported using git-ubuntu import.
Changelog parent: 3b110adb23
New changelog entries:
* Explicitly select ubuquity frontend as well, to match the
oem-config frontend, and avoid pulling in unwanted deps.
Imported using git-ubuntu import.
Changelog parent: bfc78e8dcd
New changelog entries:
* Re-enable swap on jasper-using images, a regression from
the switch from livecd-rootfs to live-build (LP: #868662)
Imported using git-ubuntu import.
Changelog parent: 3b9da43910
New changelog entries:
* Revert the previous change and apply it for all $PREINSTALLED
targets instead of just ext2|ext3|ext4, so ac100 gets the fix.
Imported using git-ubuntu import.
Changelog parent: bca9a94737
New changelog entries:
* Explicitely select the oem-config frontend to install on a
per-project basis, to match the ubiquity in use (LP: #820514)
Imported using git-ubuntu import.
Changelog parent: 720cdd5c88
New changelog entries:
* Add main, restricted, universe, and multiverse to the sources.list
for Wubi disk images (LP: #855301).
Imported using git-ubuntu import.
Changelog parent: 3bad58702f
New changelog entries:
* BuildLiveCD: Fix typo that broke installing ubuntu-defaults-builder and
its recommendations.
* Squash errors from 'ls vmlinu?-*'.
Imported using git-ubuntu import.
Changelog parent: 99d9759e40
New changelog entries:
[ Colin Watson ]
* BuildLiveCD: Add subproject and ubuntu-defaults-image locale to error
mail subject.
* BuildLiveCD: Install recommendations of ubuntu-defaults-builder.
[ Oliver Grawert ]
* also store the size of the ac100 tarball in the initrd, since the tarball
changes its name several times during build we need a second criteria to not
loop over all availiable tarballs with md5sum at install time.
Imported using git-ubuntu import.
Changelog parent: d6f140ca28
New changelog entries:
* drop FLASH_KERNEL_SKIP from live-build config, flash-kernel suppression is
handled through a diversion already.
* add FLASH_KERNEL_SKIP explicitly to the post build ac100 update-initramfs
chroot call.
Imported using git-ubuntu import.
Changelog parent: d82b716b81
New changelog entries:
* Link binary.iso or binary-hybrid.iso, if found, into the output
directory for use by BuildLiveCD.
* Tolerate ubuntu-defaults-image's kernel renaming.
* Add a -u option to BuildLiveCD which calls ubuntu-defaults-image.
Imported using git-ubuntu import.
Changelog parent: 8576454a13
New changelog entries:
* provide .bootimg as a link to .bootimg-$FLAVOUR similar to the
naming scheme we use for initrd and kernel files.
Imported using git-ubuntu import.
Changelog parent: 26a8853159
New changelog entries:
* rename ac100 bootimage to something the build system can parse easier.
Imported using git-ubuntu import.
Changelog parent: 4236d780d0
New changelog entries:
* make sure flash-kernel is not executed during build, this setting wasn't
transitioned from livecd.sh yet
Imported using git-ubuntu import.
Changelog parent: e6aabfe1aa
New changelog entries:
* include the md5 sum of the rootfs tarball in the initrd, so the installer
can check against it for ac100 installs
* post process the kernel and initrd for ac100 though abootimg to get a
proper android boot image
Imported using git-ubuntu import.
Changelog parent: 2d155200d4
New changelog entries:
[ Jani Monoses ]
* Add mx5 subarch support for Freescale i.MX53
[ Oliver Grawert ]
* adjust the packagelist for ac100 a bit, according to adam it should not
need the kernel metapackage seeded if it matches the naming convention
* do not install preinstall-pool on ac100-server, it breaks for no apparent
reason atm, this makes server rootfses for ac100 buildable again.
Imported using git-ubuntu import.
Changelog parent: 66e5f97cc1
New changelog entries:
[ Adam Conrad ]
* Switch a hardcoded "boot" to "$INITFS" in auto/build.
[ Colin Watson ]
* BuildLiveCD: Make sure livecd-rootfs is still installed in the chroot
after the dist-upgrade.
Imported using git-ubuntu import.
Changelog parent: 9ea613db8f
New changelog entries:
* make sure ac100 images have universe enabled since the kernel lives there.
Imported using git-ubuntu import.
Changelog parent: d67d517c3a
New changelog entries:
* make sure the right packages are installed on armel+ac100 subarch builds
Imported using git-ubuntu import.
Changelog parent: 5f40039fe4
New changelog entries:
* Add support for building a pool of packages into the live config:
- define SEEDMIRROR, PREINSTALL_POOL, PREINSTALL_POOL_SEEDS in config
- set PREINSTALL_POOL_SEEDS to "server-ship" for ubuntu-server
- crib seed inheritance logic from cdimage implementation of same
- run germinate against seeds from SEEDMIRROR if to populate
PREINSTALL_POOL with a list of packages from PREINSTALL_POOL_SEEDS
- create a local-hook to download PREINSTALL_POOL packages to rootfs
* And add support to deal with the above pool of packages during build:
- generate a GPG key in the background if we're going to need one
- create a sources.list.d entry pointing at the rootfs pool
- create a Packages file and create and sign a Release file
- add our previously-generated key to the apt keyring and toss it
Imported using git-ubuntu import.
Changelog parent: 5f2fbb762b
New changelog entries:
* export LB_LINUX_FLAVOURS="none" in auto/clean, so the clean
routine doesn't bomb out with no kernels selected. This almost
certainly needs fixing in live-build, but works here for now
Imported using git-ubuntu import.
Changelog parent: b6c0413acc
New changelog entries:
* Add support for building new "ubuntu-core" rootfs tarballs:
- add project support to BuildLiveCD and auto/config
- make auto/config and auto/build deal with plain FS types
- add some logic to auto/build to not choke with no kernels
* Minor cleanups to BuildLiveCD (LANG=C, bump current suite)
* Fix one spot where I missed future-proofing ext4 support
Imported using git-ubuntu import.
Changelog parent: 50cf3a267c
New changelog entries:
* Support generating different binary image types using
BINARYFORMAT=iso-hybrid and so on (although this won't actually work
until we create a syslinux-themes-ubuntu package).
Imported using git-ubuntu import.
Changelog parent: fe516c7a7f
New changelog entries:
* Handle package/task list changes in live-build 3.0~a22-1.
* Handle local sources.list changes in live-build 3.0~a22-1.
Imported using git-ubuntu import.
Changelog parent: 4c668f97e4
New changelog entries:
* Rename the ARM headless image to ubuntu-server for oneiric
* Future-proof --chroot-filesystem support for a switch to ext4
Imported using git-ubuntu import.
Changelog parent: bd1b5431d0
New changelog entries:
* Use all_chroot_pyc-purge.sh hook from live-build 3.0~a21-1ubuntu4.
Imported using git-ubuntu import.
Changelog parent: d53a745359
New changelog entries:
* Install xubuntu-live for xubuntu, not edubuntu-live (LP: #800211).
Imported using git-ubuntu import.
Changelog parent: 7af7abdcc0
New changelog entries:
* Pass correct IMAGEFORMAT through to live-build from BuildLiveCD.
* Add Lubuntu support.
* Set --chroot-filesystem option if IMAGEFORMAT is ext2 or ext3.
Imported using git-ubuntu import.
Changelog parent: d53152166c
New changelog entries:
* Remove old config directory before creating a new configuration.
Imported using git-ubuntu import.
Changelog parent: 757cfb724f
New changelog entries:
* Set pipefail (bash-specific) in auto/build so that we fail immediately
if the main image build fails.
* Anchor regex to avoid misdetecting vmlinux-3.0-0-powerpc64-smp as a
powerpc flavour kernel.
Imported using git-ubuntu import.
Changelog parent: 7e1b37f6c2
New changelog entries:
* Fix ordering of log file creation in BuildLiveCD.
* Fix permissions in BuildLiveCD when setting up auto directory.
* Switch from --binary-remove-linux to config/binary_rootfs/excludes.
Jonathan Riddell
Colin Watson
Adam Conrad
Oliver Grawert
Evan Dandrea
Jani Monoses