Adding upstream version 0.9.0+20150806.

Signed-off-by: Andrew Lee (李健秋) <ajqlee@debian.org>

.gitignore

@@ -1 +0,0 @@
-build

CMakeLists.txt

@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 2.8.11)
+cmake_minimum_required(VERSION 3.0.2 FATAL_ERROR)
 
 project(lxqt-globalkeys)
 
@@ -11,64 +11,85 @@ if(NOT CMAKE_BUILD_TYPE)
      set(CMAKE_BUILD_TYPE Release)
 endif()
 
-# Set default library installation path
-set(LIB_INSTALL_DIR "lib${LIB_SUFFIX}" CACHE PATH "Installation directory for libraries")
 
 set(CMAKE_INCLUDE_CURRENT_DIR ON)
 set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 set(CMAKE_AUTOMOC ON)
+set(CMAKE_AUTOUIC ON)
+
 find_package(Qt5Widgets REQUIRED)
 find_package(Qt5DBus REQUIRED)
 find_package(Qt5LinguistTools REQUIRED QUIET)
 find_package(lxqt REQUIRED QUIET)
-include(${LXQT_USE_FILE})
+
 
 include(LXQtTranslate)
+include(LXQtCreatePkgConfigFile)
+include(LXQtCompilerSettings NO_POLICY_SCOPE)
 
-# Standard directories for installation
+include(GNUInstallDirs) # Standard directories for installation
-include(GNUInstallDirs)
+include(CMakePackageConfigHelpers)
 
 set(LXQT_GLOBALKEYS_LIBRARY_NAME lxqt-globalkeys)
 set(LXQT_GLOBALKEYS_UI_LIBRARY_NAME lxqt-globalkeys-ui)
-set(LXQT_INSTALL_CMAKE_DIR     ${CMAKE_INSTALL_FULL_LIBDIR}/cmake)
+set(LXQT_INSTALL_CMAKE_DIR     "${CMAKE_INSTALL_DATAROOTDIR}/cmake")
 
 #************************************************
 # Build config.cmake files
 #************************************************
-#set(LXQT_SHARE_DIR ${CMAKE_INSTALL_PREFIX}/share/lxqt)
-#set(LXQT_TRANSLATIONS_DIR ${LXQT_SHARE_DIR}/translations)
-include(cmake/FindInstallConfigPath.cmake)
-
 set(LXQT_GLOBALKEYS_CMAKE_NAME ${LXQT_GLOBALKEYS_LIBRARY_NAME})
 set(LXQT_GLOBALKEYS_UI_CMAKE_NAME ${LXQT_GLOBALKEYS_UI_LIBRARY_NAME})
 
-set(LXQT_GLOBALKEYS_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include/${LXQT_GLOBALKEYS_LIBRARY_NAME}")
+configure_package_config_file(
-configure_file(
     "${CMAKE_CURRENT_SOURCE_DIR}/cmake/lxqt_globalkeys-config.cmake.in"
-    "${CMAKE_CURRENT_BINARY_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}-config.cmake"
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}-config.cmake"
-    @ONLY
+    INSTALL_DESTINATION "${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}"
 )
 
-set(LXQT_GLOBALKEYS_UI_INCLUDE_DIR ${CMAKE_INSTALL_PREFIX}/include/${LXQT_GLOBALKEYS_UI_LIBRARY_NAME})
+configure_package_config_file(
-configure_file(
     "${CMAKE_CURRENT_SOURCE_DIR}/cmake/lxqt_globalkeys_ui-config.cmake.in"
-    "${CMAKE_CURRENT_BINARY_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}-config.cmake"
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}-config.cmake"
-    @ONLY
+    INSTALL_DESTINATION "${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}"
 )
 #************************************************
 # End of build config.cmake
 #************************************************
+
+#************************************************
+# Generate config-version.cmake files
+#************************************************
+write_basic_package_version_file(
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}-config-version.cmake"
+    VERSION ${LXQT_VERSION}
+    COMPATIBILITY AnyNewerVersion
+)
+
+write_basic_package_version_file(
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}-config-version.cmake"
+    VERSION ${LXQT_VERSION}
+    COMPATIBILITY AnyNewerVersion
+)
+#************************************************
+# End of generate config-version.cmake files
+#************************************************
+
 set(LXQT_GLOBALKEYS_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}")
 add_subdirectory(daemon)
 add_subdirectory(config)
 add_subdirectory(client)
 add_subdirectory(ui)
 
-install(FILES ${CMAKE_CURRENT_BINARY_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}-config.cmake DESTINATION ${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME})
+install(FILES
-install(FILES cmake/lxqt_globalkeys_use.cmake DESTINATION ${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME})
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}-config.cmake"
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}-config-version.cmake"
+    DESTINATION "${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}"
+)
 
-install(FILES ${CMAKE_CURRENT_BINARY_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}-config.cmake DESTINATION ${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME})
+install(FILES
-install(FILES cmake/lxqt_globalkeys_ui_use.cmake DESTINATION ${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME})
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}-config.cmake"
+    "${CMAKE_BINARY_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}-config-version.cmake"
+    DESTINATION "${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}"
+)
 
 # building tarball with CPack -------------------------------------------------
 include(InstallRequiredSystemLibraries)

client/CMakeLists.txt

@@ -5,15 +5,8 @@ set(QT_DBUS_PREFIX "org.qtproject")
 
 set(${PROJECT_NAME}_HEADER_NAMESPACE "LXQtGlobalKeys")
 
-include_directories(
-    ${PROJECT_SOURCE_DIR}
-    ${CMAKE_CURRENT_BINARY_DIR}
-)
-
 set(${PROJECT_NAME}_PATH_TO_DAEMON "${LXQT_GLOBALKEYS_SOURCE_DIR}/daemon")
 
-add_definitions(-DSHARED_EXPORT=Q_DECL_EXPORT)
-
 set(${PROJECT_NAME}_SOURCES
     client.cpp
     action.cpp
@@ -21,7 +14,7 @@ set(${PROJECT_NAME}_SOURCES
 
 #
 # WARNING: Changing stuff here implies changing this:
-#           install(FILES ${${PROJECT_NAME}_MAIN_HEADER} DESTINATION include/${PROJECT_NAME} COMPONENT development RENAME "lxqtglobalkeys.h")
+#           install(FILES ${${PROJECT_NAME}_MAIN_HEADER} DESTINATION include/${PROJECT_NAME} COMPONENT Devel RENAME "lxqtglobalkeys.h")
 #
 set(${PROJECT_NAME}_MAIN_HEADER
     lxqt-globalkeys.h
@@ -53,10 +46,10 @@ set(${PROJECT_NAME}_TRANSLATIONS
 )
 
 set(${PROJECT_NAME}_DBUS_ADAPTORS
-    ${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.client.xml
+    "${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.client.xml"
 )
 
-set_source_files_properties(${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.client.xml PROPERTIES
+set_source_files_properties("${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.client.xml" PROPERTIES
     INCLUDE action_p.h
     PARENT_CLASSNAME GlobalKeyShortcut::ActionImpl
     BASENAME org.lxqt.global_key_shortcuts.client
@@ -64,10 +57,10 @@ set_source_files_properties(${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_ke
 )
 
 set(${PROJECT_NAME}_DBUS_INTERFACES
-    ${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.native.xml
+    "${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.native.xml"
 )
 
-set_source_files_properties(${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.native.xml PROPERTIES
+set_source_files_properties("${${PROJECT_NAME}_PATH_TO_DAEMON}/org.lxqt.global_key_shortcuts.native.xml" PROPERTIES
     BASENAME org.lxqt.global_key_shortcuts.native
 )
 
@@ -128,16 +121,15 @@ foreach(DBUS_INTERFACE ${${PROJECT_NAME}_DBUS_INTERFACES})
     get_source_file_property(DBUS_INTERFACE_INCLUDE ${DBUS_INTERFACE} INCLUDE)
     get_source_file_property(DBUS_INTERFACE_CLASSNAME ${DBUS_INTERFACE} CLASSNAME)
     get_source_file_property(DBUS_INTERFACE_NO_NAMESPACE ${DBUS_INTERFACE} NO_NAMESPACE)
-    set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME} PROPERTIES
+    set_source_files_properties("${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}" PROPERTIES
         INCLUDE ${DBUS_INTERFACE_INCLUDE}
         CLASSNAME ${DBUS_INTERFACE_CLASSNAME}
         NO_NAMESPACE ${DBUS_INTERFACE_NO_NAMESPACE}
     )
-    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME} ${DBUS_INTERFACE_BASENAME})
+    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}" ${DBUS_INTERFACE_BASENAME})
 endforeach()
 
 qt5_add_resources(${PROJECT_NAME}_RESOURCE_FILES ${${PROJECT_NAME}_RESOURCES})
-qt5_wrap_ui(${PROJECT_NAME}_FORM_FILES ${${PROJECT_NAME}_FORMS})
 
 set(${PROJECT_NAME}_GENERATED_FILES
     ${${PROJECT_NAME}_FORM_FILES}
@@ -153,13 +145,32 @@ set(${PROJECT_NAME}_ALL_FILES
     ${${PROJECT_NAME}_GENERATED_FILES}
 )
 
+set(${PROJECT_NAME}_PKG_CONFIG_REQUIRES "Qt5Widget, Qt5DBus")
+
 add_library(${PROJECT_NAME} SHARED ${${PROJECT_NAME}_ALL_FILES})
-target_link_libraries(${PROJECT_NAME} Qt5::Widgets Qt5::DBus)
+target_link_libraries(${PROJECT_NAME}
+    PUBLIC
+        Qt5::Widgets
+        Qt5::DBus
+)
 set_target_properties(${PROJECT_NAME}
     PROPERTIES
     VERSION ${LXQT_VERSION}
     SOVERSION ${LXQT_MAJOR_VERSION}
 )
+target_include_directories(${PROJECT_NAME}
+    INTERFACE "$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}/${LXQT_GLOBALKEYS_LIBRARY_NAME}>"
+)
+target_include_directories(${PROJECT_NAME}
+    INTERFACE "$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/include>"
+    INTERFACE "$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}>"
+)
+
+target_compile_definitions(${PROJECT_NAME}
+    PRIVATE "SHARED_EXPORT=Q_DECL_EXPORT"
+)
+
+export(TARGETS ${PROJECT_NAME} FILE "${CMAKE_BINARY_DIR}/${PROJECT_NAME}-targets.cmake")
 
 include(create_portable_headers)
 
@@ -167,11 +178,75 @@ create_portable_headers(${PROJECT_NAME}_PORTABLE_HEADERS
     NAMESPACE "${${PROJECT_NAME}_NAMESPACE}/"
     FILENAMES ${${PROJECT_NAME}_PUBLIC_CLASSES}
 )
-install(TARGETS ${PROJECT_NAME} DESTINATION ${LIB_INSTALL_DIR} COMPONENT runtime)
-install(FILES ${${PROJECT_NAME}_MAIN_HEADER} DESTINATION include/${PROJECT_NAME} COMPONENT development)
-install(FILES ${${PROJECT_NAME}_MAIN_HEADER} DESTINATION include/${PROJECT_NAME} COMPONENT development RENAME "lxqtglobalkeys.h")
-install(FILES ${${PROJECT_NAME}_PORTABLE_HEADERS} DESTINATION include/${PROJECT_NAME}/${${PROJECT_NAME}_HEADER_NAMESPACE} COMPONENT development)
-install(FILES ${${PROJECT_NAME}_PUBLIC_HEADERS} DESTINATION include/${PROJECT_NAME} COMPONENT development)
 
-include(create_pkgconfig_file)
+# Copy public headers for intree building
-create_pkgconfig_file(${PROJECT_NAME} "LXQt global key shortcuts client library")
+foreach(h ${${PROJECT_NAME}_PUBLIC_HEADERS})
+    get_filename_component(bh ${h} NAME)
+    configure_file(${h} "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}/${bh}" COPYONLY)
+endforeach()
+
+foreach(h ${${PROJECT_NAME}_PORTABLE_HEADERS})
+    get_filename_component(bh ${h} NAME)
+    configure_file(${h} "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}/${${PROJECT_NAME}_HEADER_NAMESPACE}/${bh}" COPYONLY)
+endforeach()
+
+configure_file(
+    "${${PROJECT_NAME}_MAIN_HEADER}"
+    "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}/${${PROJECT_NAME}_MAIN_HEADER}"
+    COPYONLY
+)
+
+configure_file(
+    "${${PROJECT_NAME}_MAIN_HEADER}"
+    "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}/lxqtglobalkeys.h"
+    COPYONLY
+)
+
+install(TARGETS
+    ${PROJECT_NAME}
+    DESTINATION "${CMAKE_INSTALL_LIBDIR}"
+    EXPORT ${PROJECT_NAME}-targets
+    COMPONENT Runtime
+)
+
+install(EXPORT
+    ${PROJECT_NAME}-targets
+    DESTINATION "${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_CMAKE_NAME}"
+    COMPONENT Devel
+)
+
+install(FILES
+    ${${PROJECT_NAME}_MAIN_HEADER}
+    DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PROJECT_NAME}"
+    COMPONENT Devel
+)
+
+install(FILES
+    ${${PROJECT_NAME}_MAIN_HEADER}
+    DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PROJECT_NAME}"
+    COMPONENT Devel
+    RENAME "lxqtglobalkeys.h"
+)
+
+install(FILES
+    ${${PROJECT_NAME}_PORTABLE_HEADERS}
+    DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PROJECT_NAME}/${${PROJECT_NAME}_HEADER_NAMESPACE}"
+    COMPONENT Devel
+)
+
+install(FILES
+    ${${PROJECT_NAME}_PUBLIC_HEADERS}
+    DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PROJECT_NAME}"
+    COMPONENT Devel
+)
+
+lxqt_create_pkgconfig_file(
+    PACKAGE_NAME ${PROJECT_NAME}
+    DESCRIPTIVE_NAME ${PROJECT_NAME}
+    DESCRIPTION "LXQt global key shortcuts client library"
+    INCLUDEDIRS ${PROJECT_NAME}
+    LIBS ${PROJECT_NAME}
+    REQUIRES ${${PROJECT_NAME}_PKG_CONFIG_REQUIRES}
+    VERSION ${LXQT_VERSION}
+    INSTALL
+)

client/action.cpp

@@ -41,9 +41,11 @@ ActionImpl::ActionImpl(ClientImpl *client, Action *interface, const QString &pat
     , mInterface(interface)
     , mPath(path)
     , mDescription(description)
+    , mRegistrationPending(false)
 {
     new OrgLxqtActionClientAdaptor(this);
 
+    connect(this, SIGNAL(emitRegistrationFinished()), mInterface, SIGNAL(registrationFinished()));
     connect(this, SIGNAL(emitActivated()), mInterface, SIGNAL(activated()));
     connect(this, SIGNAL(emitShortcutChanged(QString, QString)), mInterface, SIGNAL(shortcutChanged(QString, QString)));
 }
@@ -55,12 +57,18 @@ ActionImpl::~ActionImpl()
 
 QString ActionImpl::changeShortcut(const QString &shortcut)
 {
+    if (mRegistrationPending)
+        return mShortcut;
+
     mShortcut = mClient->changeClientActionShortcut(mPath, shortcut);
     return mShortcut;
 }
 
 bool ActionImpl::changeDescription(const QString &description)
 {
+    if (mRegistrationPending)
+        return false;
+
     bool result = mClient->modifyClientAction(mPath, description);
     if (result)
     {
@@ -99,6 +107,19 @@ bool ActionImpl::isValid() const
     return mValid;
 }
 
+void ActionImpl::setRegistrationPending(bool registrationPending)
+{
+    mRegistrationPending = registrationPending;
+    if (!mRegistrationPending)
+        emit emitRegistrationFinished();
+
+}
+
+bool ActionImpl::isRegistrationPending() const
+{
+    return mRegistrationPending;
+}
+
 void ActionImpl::activated()
 {
     emit emitActivated();

client/action.h

@@ -62,8 +62,10 @@ public:
     QString description() const;
 
     bool isValid() const;
+    bool isRegistrationPending() const;
 
 signals:
+    void registrationFinished();
     void activated();
     void shortcutChanged(const QString &oldShortcut, const QString &newShortcut);
 

client/action_p.h

@@ -60,11 +60,15 @@ public:
     void setValid(bool valid);
     bool isValid() const;
 
+    void setRegistrationPending(bool registrationPending);
+    bool isRegistrationPending() const;
+
 public slots:
     void activated();
     void shortcutChanged(const QString &oldShortcut, const QString &newShortcut);
 
 signals:
+    void emitRegistrationFinished();
     void emitActivated();
     void emitShortcutChanged(const QString &oldShortcut, const QString &newShortcut);
 
@@ -76,6 +80,7 @@ private:
     QString mShortcut;
     QString mDescription;
     bool mValid;
+    bool mRegistrationPending;
 };
 
 }

client/client.cpp

@@ -82,14 +82,11 @@ void ClientImpl::daemonAppeared(const QString &)
     {
         ActionImpl *globalActionImpl = I.value()->impl;
 
-        QDBusPendingReply<QString, qulonglong> reply = mProxy->addClientAction(globalActionImpl->shortcut(), QDBusObjectPath(globalActionImpl->path()), globalActionImpl->description());
+        QDBusPendingCallWatcher* watcher = new QDBusPendingCallWatcher(mProxy->addClientAction(globalActionImpl->shortcut(), QDBusObjectPath(globalActionImpl->path()), globalActionImpl->description()));
-        reply.waitForFinished();
+        connect(watcher, SIGNAL(finished(QDBusPendingCallWatcher *)), this, SLOT(registrationFinished(QDBusPendingCallWatcher *)));
-        globalActionImpl->setValid(!reply.isError() && reply.argumentAt<1>());
+        mPendingRegistrationsActions[watcher] = globalActionImpl;
-
+        mPendingRegistrationsWatchers[globalActionImpl] = watcher;
-        if (globalActionImpl->isValid())
+        globalActionImpl->setRegistrationPending(true);
-        {
-            globalActionImpl->setShortcut(reply.argumentAt<0>());
-        }
     }
     mDaemonPresent = true;
     emit emitDaemonAppeared();
@@ -101,6 +98,29 @@ bool ClientImpl::isDaemonPresent() const
     return mDaemonPresent;
 }
 
+void ClientImpl::registrationFinished(QDBusPendingCallWatcher *watcher)
+{
+    QMap<QDBusPendingCallWatcher*, ActionImpl*>::Iterator I = mPendingRegistrationsActions.find(watcher);
+    if (I != mPendingRegistrationsActions.end())
+    {
+        ActionImpl *globalActionImpl = I.value();
+
+        QDBusPendingReply<QString, qulonglong> reply = *watcher;
+        globalActionImpl->setValid(!reply.isError() && reply.argumentAt<1>());
+
+        if (globalActionImpl->isValid())
+        {
+            globalActionImpl->setShortcut(reply.argumentAt<0>());
+        }
+
+        mPendingRegistrationsWatchers.remove(globalActionImpl);
+        mPendingRegistrationsActions.erase(I);
+        watcher->deleteLater();
+
+        globalActionImpl->setRegistrationPending(false);
+    }
+}
+
 Action *ClientImpl::addClientAction(const QString &shortcut, const QString &path, const QString &description, QObject *parent)
 {
     if (!QRegExp("(/[A-Za-z0-9_]+){2,}").exactMatch(path))
@@ -125,13 +145,11 @@ Action *ClientImpl::addClientAction(const QString &shortcut, const QString &path
 
     if (mDaemonPresent)
     {
-        QDBusPendingReply<QString, qulonglong> reply = mProxy->addClientAction(shortcut, QDBusObjectPath(path), description);
+        QDBusPendingCallWatcher* watcher = new QDBusPendingCallWatcher(mProxy->addClientAction(shortcut, QDBusObjectPath(path), description));
-        reply.waitForFinished();
+        connect(watcher, SIGNAL(finished(QDBusPendingCallWatcher *)), this, SLOT(registrationFinished(QDBusPendingCallWatcher *)));
-        globalActionImpl->setValid(!reply.isError() && reply.argumentAt<1>());
+        mPendingRegistrationsActions[watcher] = globalActionImpl;
-        if (globalActionImpl->isValid())
+        mPendingRegistrationsWatchers[globalActionImpl] = watcher;
-        {
+        globalActionImpl->setRegistrationPending(true);
-            globalActionImpl->setShortcut(reply.argumentAt<0>());
-        }
     }
     else
     {
@@ -204,6 +222,21 @@ bool ClientImpl::removeClientAction(const QString &path)
 
 void ClientImpl::removeAction(ActionImpl *actionImpl)
 {
+    if (actionImpl->isRegistrationPending())
+    {
+        QMap<ActionImpl*, QDBusPendingCallWatcher*>::Iterator I = mPendingRegistrationsWatchers.find(actionImpl);
+        if (I != mPendingRegistrationsWatchers.end())
+        {
+            QDBusPendingCallWatcher *watcher = I.value();
+
+            watcher->disconnect();
+
+            mPendingRegistrationsActions.remove(watcher);
+            mPendingRegistrationsWatchers.erase(I);
+            watcher->deleteLater();
+        }
+    }
+
     QString path = actionImpl->path();
     if (!mActions.contains(path))
     {

client/client_p.h

@@ -81,6 +81,7 @@ public slots:
     void grabShortcutFinished(QDBusPendingCallWatcher *call);
     void daemonDisappeared(const QString &);
     void daemonAppeared(const QString &);
+    void registrationFinished(QDBusPendingCallWatcher *call);
 
 signals:
     void emitShortcutGrabbed(const QString &);
@@ -98,6 +99,9 @@ private:
     QMap<QString, Action*> mActions;
     QDBusServiceWatcher *mServiceWatcher;
     bool mDaemonPresent;
+
+    QMap<QDBusPendingCallWatcher*, ActionImpl*> mPendingRegistrationsActions;
+    QMap<ActionImpl*, QDBusPendingCallWatcher*> mPendingRegistrationsWatchers;
 };
 
 }

cmake/FindInstallConfigPath.cmake

@@ -1,20 +0,0 @@
-# XDG standards expects system-wide configuration files in the /etc/xdg/lxqt location.
-# Unfortunately QSettings we are using internally can be overriden in the Qt compilation
-# time to use different path for system-wide configs. (for example configure ... -sysconfdir /etc/settings ...)
-# This path can be found calling Qt4's qmake:
-#   qmake -query QT_INSTALL_CONFIGURATION
-#
-if(NOT DEFINED LXQT_ETC_XDG_DIR)
-    if(NOT QT_QMAKE_EXECUTABLE)
-        message(FATAL_ERROR "LXQT_ETC_XDG_DIR: qmake not found or wrongly detected (inlude before qt configured?)")
-    endif()
-
-    execute_process(COMMAND ${QT_QMAKE_EXECUTABLE} -query QT_INSTALL_CONFIGURATION
-                        OUTPUT_VARIABLE LXQT_ETC_XDG_DIR
-                        OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    message(STATUS "LXQT_ETC_XDG_DIR autodetected as '${LXQT_ETC_XDG_DIR}'")
-    message(STATUS "You can set it manually with -DLXQT_ETC_XDG_DIR=<value>")
-    message(STATUS "")
-endif ()
-

cmake/create_pkgconfig_file.cmake

@@ -1,33 +0,0 @@
-#
-# Write a pkg-config pc file for given "name" with "decription"
-# Arguments:
-#   name: a library name (withoud "lib" prefix and "so" suffixes
-#   desc: a desription string
-#
-macro (create_pkgconfig_file name desc)
-    set(_pkgfname "${CMAKE_CURRENT_BINARY_DIR}/${name}.pc")
-    #message(STATUS "${name}: writing pkgconfig file ${_pkgfname}")
-
-    file(WRITE "${_pkgfname}"
-            "# file generated by LXQt cmake build\n"
-            "prefix=${CMAKE_INSTALL_PREFIX}\n"
-            "libdir=\${prefix}/lib${LIB_SUFFIX}\n"
-            "includedir=\${prefix}/include\n"
-            "\n"
-            "Name: ${name}\n"
-            "Description: ${desc}\n"
-            "Version: ${LXQT_VERSION}\n"
-            "Libs: -L\${libdir} -l${name}\n"
-            "Cflags: -I\${includedir}\n"
-            "\n"
-    )
-
-    # FreeBSD loves to install files to different locations
-    # http://www.freebsd.org/doc/handbook/dirstructure.html
-    if(${CMAKE_SYSTEM_NAME} STREQUAL "FreeBSD")
-        install(FILES ${_pkgfname} DESTINATION libdata/pkgconfig)
-    else()
-        install(FILES ${_pkgfname} DESTINATION lib${LIB_SUFFIX}/pkgconfig)
-    endif()
-
-endmacro()

cmake/lxqt_globalkeys-config.cmake.in

@@ -3,41 +3,24 @@
 # The module defines the following variables
 #  LXQT_GLOBALKEYS_FOUND         - Set to TRUE if all of the above has been found
 #
-#  LXQT_GLOBALKEYS_INCLUDE_DIR   - The lxqt-globalkeys include directory
-#
-#  LXQT_GLOBALKEYS_INCLUDE_DIRS  - The lxqt-globalkeys include directory
-#
-#  LXQT_GLOBALKEYS_LIBRARY_DIRS  - The lxqt-globalkeys include directory
-#
-#  LXQT_GLOBALKEYS_LIBRARIES     - The libraries needed to use lxqt-globalkeys
-#
-#  LXQT_GLOBALKEYS_USE_FILE      - The variable LXQT_GLOBALKEYS_USE_FILE is set which is the path
-#                        to a CMake file that can be included to compile lxqt-globalkeys
-#                        applications and libraries. It sets up the compilation
-#                        environment for include directories and populates a
-#                        LXQT_GLOBALKEYS_LIBRARIES variable.
-#
-# LXQT_GLOBALKEYS_QT_LIBRARIES   - The Qt libraries needed by lxqt-globalkeys
-#
 # Typical usage:
 #    find_package(lxqt-globalkeys)
-#    include(${LXQT_GLOBALKEYS_USE_FILE})
 #    add_executable(use-lxqt-globalkeys main.cpp)
-#    target_link_libraries(use-qtxdg ${LXQT_GLOBALKEYS_QT_LIBRARIES} ${LXQT_GLOBALKEYS_LIBRARIES})
+#    target_link_libraries(use-lxqt-globalkeys lxqt-globalkeys)
 
-set(LXQT_GLOBALKEYS_INCLUDE_DIR   @LXQT_GLOBALKEYS_INCLUDE_DIR@)
+@PACKAGE_INIT@
-set(LXQT_GLOBALKEYS_LIBRARY       @LXQT_GLOBALKEYS_LIBRARY_NAME@)
 
-set(LXQT_GLOBALKEYS_LIBRARIES     "${LXQT_GLOBALKEYS_LIBRARY}")
+include(CMakeFindDependencyMacro)
-set(LXQT_GLOBALKEYS_INCLUDE_DIRS  "${LXQT_GLOBALKEYS_INCLUDE_DIR}")
-set(LXQT_GLOBALKEYS_LIBRARY_DIRS  @CMAKE_INSTALL_PREFIX@/@LIB_INSTALL_DIR@)
-
-set(LXQT_GLOBALKEYS_USE_FILE      "${CMAKE_CURRENT_LIST_DIR}/lxqt_globalkeys_use.cmake")
-set(LXQT_GLOBALKEYS_FOUND 1)
 
 set(LXQT_GLOBALKEYS_MAJOR_VERSION @LXQT_MAJOR_VERSION@)
 set(LXQT_GLOBALKEYS_MINOR_VERSION @LXQT_MINOR_VERSION@)
 set(LXQT_GLOBALKEYS_PATCH_VERSION @LXQT_PATCH_VERSION@)
 set(LXQT_GLOBALKEYS_VERSION @LXQT_VERSION@)
 
-mark_as_advanced(LXQT_GLOBALKEYS_LIBRARY LXQT_GLOBALKEYS_INCLUDE_DIR)
+find_dependency(Qt5Widgets)
+find_dependency(Qt5DBus)
+
+if (CMAKE_VERSION VERSION_GREATER 2.8.12)
+    cmake_policy(SET CMP0024 OLD)
+endif()
+include("${CMAKE_CURRENT_LIST_DIR}/lxqt-globalkeys-targets.cmake")

cmake/lxqt_globalkeys_ui-config.cmake.in

@@ -3,41 +3,25 @@
 # The module defines the following variables
 #  LXQT_GLOBALKEYS_UI_FOUND         - Set to TRUE if all of the above has been found
 #
-#  LXQT_GLOBALKEYS_UI_INCLUDE_DIR   - The lxqt-globalkeys-ui include directory
-#
-#  LXQT_GLOBALKEYS_UI_INCLUDE_DIRS  - The lxqt-globalkeys-ui include directory
-#
-#  LXQT_GLOBALKEYS_LIBRARY_DIRS  - The lxqt-globalkeys include directory
-#
-#  LXQT_GLOBALKEYS_UI_LIBRARIES     - The libraries needed to use lxqt-globalkeys-ui
-#
-#  LXQT_GLOBALKEYS_UI_USE_FILE      - The variable LXQT_GLOBALKEYS_UI_USE_FILE is set which is the path
-#                        to a CMake file that can be included to compile lxqt-globalkeys-ui
-#                        applications and libraries. It sets up the compilation
-#                        environment for include directories and populates a
-#                        LXQT_GLOBALKEYS_UI_LIBRARIES variable.
-#
-# LXQT_GLOBALKEYS_UI_QT_LIBRARIES   - The Qt libraries needed by lxqt-globalkeys-ui
-#
 # Typical usage:
 #    find_package(lxqt-globalkeys-ui)
-#    include(${LXQT_GLOBALKEYS_UI_USE_FILE})
 #    add_executable(use-lxqt-globalkeys-ui main.cpp)
-#    target_link_libraries(use-qtxdg ${LXQT_GLOBALKEYS_UI_QT_LIBRARIES} ${LXQT_GLOBALKEYS_UI_LIBRARIES})
+#    target_link_libraries(use-lxqt-globalkeys-ui lxqt-globalkeys-ui)
 
-set(LXQT_GLOBALKEYS_UI_INCLUDE_DIR   @LXQT_GLOBALKEYS_UI_INCLUDE_DIR@)
+@PACKAGE_INIT@
-set(LXQT_GLOBALKEYS_UI_LIBRARY       @LXQT_GLOBALKEYS_UI_LIBRARY_NAME@)
 
-set(LXQT_GLOBALKEYS_UI_LIBRARIES     "${LXQT_GLOBALKEYS_UI_LIBRARY}")
+include(CMakeFindDependencyMacro)
-set(LXQT_GLOBALKEYS_UI_INCLUDE_DIRS  "${LXQT_GLOBALKEYS_UI_INCLUDE_DIR}")
-set(LXQT_GLOBALKEYS_UI_LIBRARY_DIRS  @CMAKE_INSTALL_PREFIX@/@LIB_INSTALL_DIR@)
-
-set(LXQT_GLOBALKEYS_UI_USE_FILE      "${CMAKE_CURRENT_LIST_DIR}/lxqt_globalkeys_ui_use.cmake")
-set(LXQT_GLOBALKEYS_UI_FOUND 1)
 
 set(LXQT_GLOBALKEYS_UI_MAJOR_VERSION @LXQT_MAJOR_VERSION@)
 set(LXQT_GLOBALKEYS_UI_MINOR_VERSION @LXQT_MINOR_VERSION@)
 set(LXQT_GLOBALKEYS_UI_PATCH_VERSION @LXQT_PATCH_VERSION@)
 set(LXQT_GLOBALKEYS_UI_VERSION @LXQT_VERSION@)
 
-mark_as_advanced(LXQT_GLOBALKEYS_UI_LIBRARY LXQT_GLOBALKEYS_UI_INCLUDE_DIR)
+find_dependency(Qt5Widgets)
+find_dependency(Qt5DBus)
+find_dependency(lxqt-globalkeys)
+
+if (CMAKE_VERSION VERSION_GREATER 2.8.12)
+    cmake_policy(SET CMP0024 OLD)
+endif()
+include("${CMAKE_CURRENT_LIST_DIR}/lxqt-globalkeys-ui-targets.cmake")

cmake/lxqt_globalkeys_ui_use.cmake

@@ -1,2 +0,0 @@
-include_directories(${LXQT_GLOBALKEYS_UI_INCLUDE_DIRS})
-link_directories(${LXQT_GLOBALKEYS_UI_LIBRARY_DIRS})

cmake/lxqt_globalkeys_use.cmake

@@ -1,2 +0,0 @@
-include_directories(${LXQT_GLOBALKEYS_INCLUDE_DIRS})
-link_directories(${LXQT_GLOBALKEYS_LIBRARY_DIRS})

config/CMakeLists.txt

@@ -7,18 +7,8 @@ endif()
 
 find_package(KF5WindowSystem REQUIRED QUIET)
 
-set(QTX_INCLUDE_DIRS "")
-set(QTX_LIBRARIES Qt5::Widgets Qt5::DBus)
-
 set(QT_DBUS_PREFIX "org.qtproject")
 
-include_directories(
-    "${PROJECT_SOURCE_DIR}"
-    "${CMAKE_CURRENT_BINARY_DIR}"
-    ${QTX_INCLUDE_DIRS}
-    ${LXQT_INCLUDE_DIRS}
-)
-
 set(${PROJECT_NAME}_PATH_TO_DAEMON "${LXQT_GLOBALKEYS_SOURCE_DIR}/daemon")
 
 set(${PROJECT_NAME}_SOURCES
@@ -94,23 +84,22 @@ foreach(DBUS_INTERFACE ${${PROJECT_NAME}_DBUS_INTERFACES})
     get_filename_component(DBUS_INTERFACE_FILENAME ${DBUS_INTERFACE} NAME)
     configure_file(
         ${DBUS_INTERFACE}
-        ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}
+        "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}"
         @ONLY
     )
     get_source_file_property(DBUS_INTERFACE_BASENAME ${DBUS_INTERFACE} BASENAME)
     get_source_file_property(DBUS_INTERFACE_INCLUDE ${DBUS_INTERFACE} INCLUDE)
     get_source_file_property(DBUS_INTERFACE_CLASSNAME ${DBUS_INTERFACE} CLASSNAME)
     get_source_file_property(DBUS_INTERFACE_NO_NAMESPACE ${DBUS_INTERFACE} NO_NAMESPACE)
-    set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME} PROPERTIES
+    set_source_files_properties("${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}" PROPERTIES
         INCLUDE ${DBUS_INTERFACE_INCLUDE}
         CLASSNAME ${DBUS_INTERFACE_CLASSNAME}
         NO_NAMESPACE ${DBUS_INTERFACE_NO_NAMESPACE}
     )
-    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME} ${DBUS_INTERFACE_BASENAME})
+    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}" ${DBUS_INTERFACE_BASENAME})
 endforeach()
 
 qt5_add_resources(${PROJECT_NAME}_RESOURCE_FILES ${${PROJECT_NAME}_RESOURCES})
-qt5_wrap_ui(${PROJECT_NAME}_FORM_FILES ${${PROJECT_NAME}_FORMS})
 
 # Translations **********************************
 lxqt_translate_ts(${PROJECT_NAME}_QM_FILES
@@ -145,7 +134,16 @@ set(${PROJECT_NAME}_ALL_FILES
 )
 
 add_executable(${PROJECT_NAME} ${${PROJECT_NAME}_ALL_FILES})
-target_link_libraries(${PROJECT_NAME} KF5::WindowSystem ${QTX_LIBRARIES} ${LXQT_LIBRARIES})
+target_link_libraries(${PROJECT_NAME} KF5::WindowSystem lxqt)
 
-install(TARGETS ${PROJECT_NAME} RUNTIME DESTINATION bin)
+install(TARGETS
-install(FILES ${${PROJECT_NAME}_DESKTOP_FILES} DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
+    ${PROJECT_NAME}
+    RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
+    COMPONENT Runtime
+)
+
+install(FILES
+    ${${PROJECT_NAME}_DESKTOP_FILES}
+    DESTINATION "${CMAKE_INSTALL_DATAROOTDIR}/applications"
+    COMPONENT Runtime
+)

config/translations/lxqt-config-globalkeyshortcuts_hu.desktop

@@ -0,0 +1,4 @@
+# Translations
+Name[hu]=LxQt gyorsbillentyűk
+Comment[hu]=LXQt általános forróbillentyűinek beállítása
+GenericName[hu]=LXQt gyorsbillentyűk beállítása

config/translations/lxqt-config-globalkeyshortcuts_hu.ts

@@ -0,0 +1,93 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE TS>
+<TS version="2.1" language="hu_HU">
+<context>
+    <name>CommandFinder</name>
+    <message>
+        <source>...</source>
+        <translation>...</translation>
+    </message>
+    <message>
+        <source>Find a command</source>
+        <translation>Parancs keresés</translation>
+    </message>
+</context>
+<context>
+    <name>ShortcutConfigWindow</name>
+    <message>
+        <source>LxQt Shortcut Editor</source>
+        <translation>LXQt forróbillentyű szerkesztés</translation>
+    </message>
+    <message>
+        <source>Description</source>
+        <translation>Leírás</translation>
+    </message>
+    <message>
+        <source>Shortcut</source>
+        <translation>Forróbillentyű</translation>
+    </message>
+    <message>
+        <source>Command</source>
+        <translation>Parancs</translation>
+    </message>
+    <message>
+        <source>Add New</source>
+        <translation>Új</translation>
+    </message>
+    <message>
+        <source>Remove</source>
+        <translation>Törlés</translation>
+    </message>
+    <message>
+        <source>Add Group</source>
+        <translation>Csoport</translation>
+    </message>
+    <message>
+        <source>Reset</source>
+        <translation>Visszavon</translation>
+    </message>
+    <message>
+        <source>Close</source>
+        <translation>Bezár</translation>
+    </message>
+</context>
+<context>
+    <name>ShortcutEditor</name>
+    <message>
+        <source>None</source>
+        <translation>Nincs</translation>
+    </message>
+    <message>
+        <source>Add Shortcut</source>
+        <translation>Forróbillentyű adás</translation>
+    </message>
+    <message>
+        <source>Remove</source>
+        <translation>Törlés</translation>
+    </message>
+    <message>
+        <source>New Group</source>
+        <translation>Új csoport</translation>
+    </message>
+    <message>
+        <source>Reset Changes</source>
+        <translation>Visszavonás</translation>
+    </message>
+    <message>
+        <source>Question</source>
+        <translation>Kérdés</translation>
+    </message>
+    <message>
+        <source>Delete group: %1? (everything inside will be removed altogether)</source>
+        <translation>A %1 csoport törlése? (Minden kapcsolata is törlődik)</translation>
+    </message>
+    <message>
+        <source>Delete %1?</source>
+        <translation>%1 törlése?</translation>
+    </message>
+    <message>
+        <source>Binding for %1 already exists. Replace old one?</source>
+        <translation>A %1 már foglalt. Felváltsuk az újjal?</translation>
+    </message>
+</context>
+</TS>

config/translations/lxqt-config-globalkeyshortcuts_it_IT.desktop

@@ -1,4 +1,3 @@
 # Translations
-Name[it_IT]=Configurazione delle scorciatoie di LxQt
+Name[it_IT]=Scorciatoie globali
-Comment[it_IT]=Configura le scorciatoie globali del desktop LxQt
+Comment[it_IT]=Configura le scorciatoie globali di LXQt 
-GenericName[it_IT]=Configurazione delle scorciatoie globali di LxQt

daemon/CMakeLists.txt

@@ -6,15 +6,10 @@ if(NOT CMAKE_BUILD_TYPE)
 endif()
 
 find_package(X11)
-include_directories(${X11_INCLUDE_DIR})
+include_directories("${X11_INCLUDE_DIR}")
 
 set(QT_DBUS_PREFIX "org.qtproject")
 
-include_directories(
-    ${PROJECT_SOURCE_DIR}
-    ${CMAKE_CURRENT_BINARY_DIR}
-)
-
 set(${PROJECT_NAME}_SOURCES
     main.cpp
     core.cpp
@@ -92,7 +87,7 @@ foreach(DBUS_ADAPTOR ${${PROJECT_NAME}_DBUS_ADAPTORS})
     get_filename_component(DBUS_ADAPTOR_FILENAME ${DBUS_ADAPTOR} NAME)
     configure_file(
         ${DBUS_ADAPTOR}
-        ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME}
+        "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME}"
         @ONLY
     )
     get_source_file_property(DBUS_ADAPTOR_INCLUDE ${DBUS_ADAPTOR} INCLUDE)
@@ -101,12 +96,12 @@ foreach(DBUS_ADAPTOR ${${PROJECT_NAME}_DBUS_ADAPTORS})
     get_source_file_property(DBUS_ADAPTOR_CLASSNAME ${DBUS_ADAPTOR} CLASSNAME)
     if(DBUS_ADAPTOR_BASENAME)
         if(DBUS_ADAPTOR_CLASSNAME)
-            qt5_add_dbus_adaptor(${PROJECT_NAME}_DBUS_ADAPTOR_FILES ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME} ${DBUS_ADAPTOR_INCLUDE} ${DBUS_ADAPTOR_PARENT_CLASSNAME} ${DBUS_ADAPTOR_BASENAME} ${DBUS_ADAPTOR_CLASSNAME})
+            qt5_add_dbus_adaptor(${PROJECT_NAME}_DBUS_ADAPTOR_FILES "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME}" ${DBUS_ADAPTOR_INCLUDE} ${DBUS_ADAPTOR_PARENT_CLASSNAME} ${DBUS_ADAPTOR_BASENAME} ${DBUS_ADAPTOR_CLASSNAME})
         else()
-            qt5_add_dbus_adaptor(${PROJECT_NAME}_DBUS_ADAPTOR_FILES ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME} ${DBUS_ADAPTOR_INCLUDE} ${DBUS_ADAPTOR_PARENT_CLASSNAME} ${DBUS_ADAPTOR_BASENAME})
+            qt5_add_dbus_adaptor(${PROJECT_NAME}_DBUS_ADAPTOR_FILES "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME}" ${DBUS_ADAPTOR_INCLUDE} ${DBUS_ADAPTOR_PARENT_CLASSNAME} ${DBUS_ADAPTOR_BASENAME})
         endif()
     else()
-        qt5_add_dbus_adaptor(${PROJECT_NAME}_DBUS_ADAPTOR_FILES ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME} ${DBUS_ADAPTOR_INCLUDE} ${DBUS_ADAPTOR_PARENT_CLASSNAME})
+        qt5_add_dbus_adaptor(${PROJECT_NAME}_DBUS_ADAPTOR_FILES "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_ADAPTOR_FILENAME}" ${DBUS_ADAPTOR_INCLUDE} ${DBUS_ADAPTOR_PARENT_CLASSNAME})
     endif()
 endforeach()
 
@@ -114,23 +109,22 @@ foreach(DBUS_INTERFACE ${${PROJECT_NAME}_DBUS_INTERFACES})
     get_filename_component(DBUS_INTERFACE_FILENAME ${DBUS_INTERFACE} NAME)
     configure_file(
         ${DBUS_INTERFACE}
-        ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}
+        "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}"
         @ONLY
     )
     get_source_file_property(DBUS_INTERFACE_BASENAME ${DBUS_INTERFACE} BASENAME)
     get_source_file_property(DBUS_INTERFACE_INCLUDE ${DBUS_INTERFACE} INCLUDE)
     get_source_file_property(DBUS_INTERFACE_CLASSNAME ${DBUS_INTERFACE} CLASSNAME)
     get_source_file_property(DBUS_INTERFACE_NO_NAMESPACE ${DBUS_INTERFACE} NO_NAMESPACE)
-    set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME} PROPERTIES
+    set_source_files_properties("${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}" PROPERTIES
         INCLUDE ${DBUS_INTERFACE_INCLUDE}
         CLASSNAME ${DBUS_INTERFACE_CLASSNAME}
         NO_NAMESPACE ${DBUS_INTERFACE_NO_NAMESPACE}
     )
-    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME} ${DBUS_INTERFACE_BASENAME})
+    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}" ${DBUS_INTERFACE_BASENAME})
 endforeach()
 
 qt5_add_resources(${PROJECT_NAME}_RESOURCE_FILES ${${PROJECT_NAME}_RESOURCES})
-qt5_wrap_ui(${PROJECT_NAME}_FORM_FILES ${${PROJECT_NAME}_FORMS})
 
 set(${PROJECT_NAME}_GENERATED_FILES
     ${${PROJECT_NAME}_FORM_FILES}
@@ -147,6 +141,11 @@ set(${PROJECT_NAME}_ALL_FILES
 )
 
 add_executable(${PROJECT_NAME} ${${PROJECT_NAME}_ALL_FILES})
-target_link_libraries(${PROJECT_NAME} ${X11_LIBRARIES} Qt5::Widgets Qt5::DBus)
+target_link_libraries(${PROJECT_NAME} ${X11_LIBRARIES} lxqt Qt5::Widgets Qt5::DBus)
+lxqt_enable_target_exceptions(${PROJECT_NAME} PRIVATE)
 
-install(TARGETS ${PROJECT_NAME} RUNTIME DESTINATION bin)
+install(TARGETS
+    ${PROJECT_NAME}
+    RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
+    COMPONENT Runtime
+)

daemon/core.cpp

@@ -25,8 +25,9 @@
  *
  * END_COMMON_COPYRIGHT_HEADER */
 
-#include <QCoreApplication>
+#include <LXQt/Application>
 
+#include <QScopedArrayPointer>
 #include <QSettings>
 #include <QTimer>
 #include <QDBusConnectionInterface>
@@ -69,14 +70,6 @@ enum
 static Core *s_Core = 0;
 
 
-void unixSignalHandler(int signalNumber)
-{
-    if (s_Core)
-    {
-        s_Core->unixSignalHandler(signalNumber);
-    }
-}
-
 int x11ErrorHandler(Display *display, XErrorEvent *errorEvent)
 {
     if (s_Core)
@@ -411,8 +404,8 @@ Core::Core(bool useSyslog, bool minLogLevelSet, int minLogLevel, const QStringLi
 
         openlog("lxqt-global-action-daemon", LOG_PID, LOG_USER);
 
-        ::signal(SIGTERM, ::unixSignalHandler);
+        connect(lxqtApp, &LxQt::Application::unixSignal, this, &Core::unixSignalHandler);
-        ::signal(SIGINT, ::unixSignalHandler);
+        lxqtApp->listenToUnixSignals(QList<int>() << SIGTERM << SIGINT);
 
 
         if (!QDBusConnection::sessionBus().registerService("org.lxqt.global_key_shortcuts"))
@@ -581,7 +574,7 @@ Core::Core(bool useSyslog, bool minLogLevelSet, int minLogLevel, const QStringLi
                         }
                         if (id)
                         {
-                            mShortcutAndActionById[id].second->setEnabled(enabled);
+                            enableActionNonGuarded(id, enabled);
                         }
 
                         settings.endGroup();
@@ -828,7 +821,7 @@ int Core::x11ErrorHandler(Display */*display*/, XErrorEvent *errorEvent)
 
 bool Core::waitForX11Error(int level, uint timeout)
 {
-    pollfd *fds = new pollfd[1];
+    pollfd fds[1];
     fds[0].fd = mX11ErrorPipe[STDIN_FILENO];
     fds[0].events = POLLIN | POLLERR | POLLHUP;
     if (poll(fds, 1, timeout) < 0)
@@ -1367,7 +1360,7 @@ void Core::run()
 
             default:
             {
-                pollfd *fds = new pollfd[1];
+                pollfd fds[1];
                 fds[0].fd = mX11RequestPipe[STDIN_FILENO];
                 fds[0].events = POLLIN | POLLERR | POLLHUP;
                 if (poll(fds, 1, 0) >= 0)
@@ -1400,17 +1393,16 @@ void Core::run()
                             }
                             if (length)
                             {
-                                char *str = new char[length + 1];
+                                QScopedArrayPointer<char> str(new char[length + 1]);
                                 str[length] = '\0';
-                                if (error_t error = readAll(mX11RequestPipe[STDIN_FILENO], str, length))
+                                if (error_t error = readAll(mX11RequestPipe[STDIN_FILENO], str.data(), length))
                                 {
                                     log(LOG_CRIT, "Cannot read from X11 request pipe: %s", strerror(error));
                                     close(mX11ResponsePipe[STDIN_FILENO]);
                                     mX11EventLoopActive = false;
                                     break;
                                 }
-                                KeySym keySym = XStringToKeysym(str);
+                                KeySym keySym = XStringToKeysym(str.data());
-                                delete[] str;
                                 lockX11Error();
                                 keyCode = XKeysymToKeycode(mDisplay, keySym);
                                 x11Error = checkX11Error();
@@ -1682,11 +1674,14 @@ void Core::serviceDisappeared(const QString &sender)
                 {
                     const QString &shortcut = shortcutAndActionById.value().first;
 
-                    dynamic_cast<ClientAction *>(shortcutAndActionById.value().second)->disappeared();
+                    ClientAction * action = dynamic_cast<ClientAction *>(shortcutAndActionById.value().second);
+                    action->disappeared();
                     mDaemonAdaptor->emit_clientActionSenderChanged(id, QString());
 
                     X11Shortcut X11shortcut = mX11ByShortcut[shortcut];
 
+                    if (action->isEnabled())
+                    {
                         IdsByShortcut::iterator idsByShortcut = mIdsByShortcut.find(shortcut);
                         if (idsByShortcut != mIdsByShortcut.end())
                         {
@@ -1702,6 +1697,19 @@ void Core::serviceDisappeared(const QString &sender)
                             }
                         }
                     }
+                    else
+                    {
+                        IdsByShortcut::iterator idsByShortcut = mDisabledIdsByShortcut.find(shortcut);
+                        if (idsByShortcut != mDisabledIdsByShortcut.end())
+                        {
+                            idsByShortcut.value().remove(id);
+                            if (idsByShortcut.value().isEmpty())
+                            {
+                                mDisabledIdsByShortcut.erase(idsByShortcut);
+                            }
+                        }
+                    }
+                }
             }
             mSenderByClientPath.remove(path);
         }
@@ -1798,17 +1806,15 @@ QString Core::remoteKeycodeToString(KeyCode keyCode)
     }
     if (length)
     {
-        char *str = new char[length + 1];
+        QScopedArrayPointer<char> str(new char[length + 1]);
         str[length] = '\0';
-        if (error_t error = readAll(mX11ResponsePipe[STDIN_FILENO], str, length))
+        if (error_t error = readAll(mX11ResponsePipe[STDIN_FILENO], str.data(), length))
         {
             log(LOG_CRIT, "Cannot read from X11 response pipe: %s", strerror(error));
             qApp->quit();
             return QString();
         }
-        result = str;
+        result = str.data();
-
-        delete[] str;
     }
 
     return result;
@@ -2389,7 +2395,7 @@ void Core::enableClientAction(bool &result, const QDBusObjectPath &path, bool en
 
     qulonglong id = idByNativeClient.value();
 
-    mShortcutAndActionById[id].second->setEnabled(enabled);
+    enableActionNonGuarded(id, enabled);
 
     saveConfig();
 
@@ -2429,24 +2435,75 @@ void Core::isClientActionEnabled(bool &enabled, const QDBusObjectPath &path, con
 }
 
 void Core::enableAction(bool &result, qulonglong id, bool enabled)
+{
+    QMutexLocker lock(&mDataMutex);
+    result = enableActionNonGuarded(id, enabled);
+}
+
+bool Core::enableActionNonGuarded(qulonglong id, bool enabled)
 {
     log(LOG_INFO, "enableAction id:%llu enabled:%s", id, enabled ? "true" : " false");
 
-    QMutexLocker lock(&mDataMutex);
 
     ShortcutAndActionById::iterator shortcutAndActionById = mShortcutAndActionById.find(id);
     if (shortcutAndActionById == mShortcutAndActionById.end())
     {
         log(LOG_WARNING, "No action registered with id #%llu", id);
-        result = false;
+        return false;
-        return;
     }
 
+    BaseAction * action = shortcutAndActionById.value().second;
+    QString const & shortcut = shortcutAndActionById.value().first;
+    if (action->isEnabled() != enabled)
+    {
         shortcutAndActionById.value().second->setEnabled(enabled);
+        if (enabled)
+        {
+            IdsByShortcut::iterator idsByShortcut = mIdsByShortcut.find(shortcut);
+            if (idsByShortcut != mIdsByShortcut.end())
+            {
+                if (idsByShortcut.value().isEmpty())
+                {
+                    if (!remoteXGrabKey(mX11ByShortcut[shortcut]))
+                    {
+                        log(LOG_WARNING, "Cannot grab shortcut '%s'", qPrintable(shortcut));
+                    }
+                }
+            }
+            idsByShortcut = mDisabledIdsByShortcut.find(shortcut);
+            if (idsByShortcut != mDisabledIdsByShortcut.end())
+            {
+                idsByShortcut.value().remove(id);
+                if (idsByShortcut.value().isEmpty())
+                {
+                    mDisabledIdsByShortcut.erase(idsByShortcut);
+                }
+            }
+            mIdsByShortcut[shortcut].insert(id);
+        }
+        else
+        {
+            IdsByShortcut::iterator idsByShortcut = mIdsByShortcut.find(shortcut);
+            if (idsByShortcut != mIdsByShortcut.end())
+            {
+                idsByShortcut.value().remove(id);
+                if (idsByShortcut.value().isEmpty())
+                {
+                    mIdsByShortcut.erase(idsByShortcut);
+
+                    if (!remoteXUngrabKey(mX11ByShortcut[shortcut]))
+                    {
+                        log(LOG_WARNING, "Cannot ungrab shortcut '%s'", qPrintable(shortcut));
+                    }
+                }
+            }
+            mDisabledIdsByShortcut[shortcut].insert(id);
+        }
 
         saveConfig();
+    }
 
-    result = true;
+    return true;
 }
 
 void Core::isActionEnabled(bool &enabled, qulonglong id)
@@ -2539,6 +2596,10 @@ void Core::changeClientActionShortcut(QPair<QString, qulonglong> &result, const
     QString oldShortcut = shortcutAndActionById.value().first;
 
     if (oldShortcut != newShortcut)
+    {
+        BaseAction const * const action = shortcutAndActionById.value().second;
+
+        if (action->isEnabled())
         {
             newShortcut = grabOrReuseKey(X11shortcut, newShortcut);
             if (newShortcut.isEmpty())
@@ -2563,6 +2624,21 @@ void Core::changeClientActionShortcut(QPair<QString, qulonglong> &result, const
             }
 
             mIdsByShortcut[newShortcut].insert(id);
+        }
+        else
+        {
+            IdsByShortcut::iterator idsByShortcut = mDisabledIdsByShortcut.find(oldShortcut);
+            if (idsByShortcut != mDisabledIdsByShortcut.end())
+            {
+                idsByShortcut.value().remove(id);
+                if (idsByShortcut.value().isEmpty())
+                {
+                    mDisabledIdsByShortcut.erase(idsByShortcut);
+                }
+            }
+
+            mDisabledIdsByShortcut[newShortcut].insert(id);
+        }
         shortcutAndActionById.value().first = newShortcut;
     }
 
@@ -2606,6 +2682,10 @@ void Core::changeShortcut(QString &result, const qulonglong &id, const QString &
     QString oldShortcut = shortcutAndActionById.value().first;
 
     if (oldShortcut != newShortcut)
+    {
+        BaseAction const * const action = shortcutAndActionById.value().second;
+
+        if (action->isEnabled())
         {
             newShortcut = grabOrReuseKey(X11shortcut, newShortcut);
             if (newShortcut.isEmpty())
@@ -2630,6 +2710,21 @@ void Core::changeShortcut(QString &result, const qulonglong &id, const QString &
             }
 
             mIdsByShortcut[newShortcut].insert(id);
+        }
+        else
+        {
+            IdsByShortcut::iterator idsByShortcut = mDisabledIdsByShortcut.find(oldShortcut);
+            if (idsByShortcut != mDisabledIdsByShortcut.end())
+            {
+                idsByShortcut.value().remove(id);
+                if (idsByShortcut.value().isEmpty())
+                {
+                    mDisabledIdsByShortcut.erase(idsByShortcut);
+                }
+            }
+
+            mDisabledIdsByShortcut[newShortcut].insert(id);
+        }
         shortcutAndActionById.value().first = newShortcut;
 
         if (!strcmp(shortcutAndActionById.value().second->type(), ClientAction::id()))
@@ -2715,10 +2810,14 @@ void Core::removeClientAction(bool &result, const QDBusObjectPath &path, const Q
 
     X11Shortcut X11shortcut = mX11ByShortcut[shortcut];
 
-    delete shortcutAndActionById.value().second;
+    BaseAction * action = shortcutAndActionById.value().second;
+    const bool enabled = action->isEnabled();
+    delete action;
     mShortcutAndActionById.erase(shortcutAndActionById);
     mIdByClientPath.remove(path);
 
+    if (enabled)
+    {
         IdsByShortcut::iterator idsByShortcut = mIdsByShortcut.find(shortcut);
         if (idsByShortcut != mIdsByShortcut.end())
         {
@@ -2733,6 +2832,19 @@ void Core::removeClientAction(bool &result, const QDBusObjectPath &path, const Q
                 }
             }
         }
+    }
+    else
+    {
+        IdsByShortcut::iterator idsByShortcut = mDisabledIdsByShortcut.find(shortcut);
+        if (idsByShortcut != mDisabledIdsByShortcut.end())
+        {
+            idsByShortcut.value().remove(id);
+            if (idsByShortcut.value().isEmpty())
+            {
+                mDisabledIdsByShortcut.erase(idsByShortcut);
+            }
+        }
+    }
 
     mSenderByClientPath.remove(path);
 
@@ -2791,10 +2903,12 @@ void Core::removeAction(bool &result, const qulonglong &id)
     QString shortcut = shortcutAndActionById.value().first;
 
     X11Shortcut X11shortcut = mX11ByShortcut[shortcut];
-
+    const bool enabled = action->isEnabled();
     delete action;
     mShortcutAndActionById.erase(shortcutAndActionById);
 
+    if (enabled)
+    {
         IdsByShortcut::iterator idsByShortcut = mIdsByShortcut.find(shortcut);
         if (idsByShortcut != mIdsByShortcut.end())
         {
@@ -2803,12 +2917,25 @@ void Core::removeAction(bool &result, const qulonglong &id)
             {
                 mIdsByShortcut.erase(idsByShortcut);
 
-            if (!remoteXUngrabKey(X11shortcut))
+                if (enabled && !remoteXUngrabKey(X11shortcut))
                 {
                     log(LOG_WARNING, "Cannot ungrab shortcut '%s'", qPrintable(shortcut));
                 }
             }
         }
+    }
+    else
+    {
+        IdsByShortcut::iterator idsByShortcut = mDisabledIdsByShortcut.find(shortcut);
+        if (idsByShortcut != mDisabledIdsByShortcut.end())
+        {
+            idsByShortcut.value().remove(id);
+            if (idsByShortcut.value().isEmpty())
+            {
+                mDisabledIdsByShortcut.erase(idsByShortcut);
+            }
+        }
+    }
 
     saveConfig();
 
@@ -2849,8 +2976,11 @@ void Core::deactivateClientAction(bool &result, const QDBusObjectPath &path, con
     ShortcutAndActionById::iterator shortcutAndActionById = mShortcutAndActionById.find(id);
     QString shortcut = shortcutAndActionById.value().first;
 
-    dynamic_cast<ClientAction*>(shortcutAndActionById.value().second)->disappeared();
+    ClientAction * const action = dynamic_cast<ClientAction*>(shortcutAndActionById.value().second);
+    action->disappeared();
 
+    if (action->isEnabled())
+    {
         IdsByShortcut::iterator idsByShortcut = mIdsByShortcut.find(shortcut);
         if (idsByShortcut != mIdsByShortcut.end())
         {
@@ -2865,6 +2995,19 @@ void Core::deactivateClientAction(bool &result, const QDBusObjectPath &path, con
                 }
             }
         }
+    }
+    else
+    {
+        IdsByShortcut::iterator idsByShortcut = mDisabledIdsByShortcut.find(shortcut);
+        if (idsByShortcut != mDisabledIdsByShortcut.end())
+        {
+            idsByShortcut.value().remove(id);
+            if (idsByShortcut.value().isEmpty())
+            {
+                mDisabledIdsByShortcut.erase(idsByShortcut);
+            }
+        }
+    }
 
     mSenderByClientPath.remove(path);
 
@@ -3174,17 +3317,15 @@ void Core::shortcutGrabbed()
         }
         if (length)
         {
-            char *str = new char[length + 1];
+            QScopedArrayPointer<char> str(new char[length + 1]);
             str[length] = '\0';
-            if (error_t error = readAll(mX11ResponsePipe[STDIN_FILENO], str, length))
+            if (error_t error = readAll(mX11ResponsePipe[STDIN_FILENO], str.data(), length))
             {
                 log(LOG_CRIT, "Cannot read from X11 response pipe: %s", strerror(error));
                 qApp->quit();
                 return;
             }
-            shortcut = str;
+            shortcut = str.data();
-
-            delete[] str;
         }
     }
 

daemon/core.h

@@ -150,6 +150,7 @@ private slots:
     void shortcutGrabTimedout();
 
 private:
+    bool enableActionNonGuarded(qulonglong id, bool enabled);
     QPair<QString, qulonglong> addOrRegisterClientAction(const QString &shortcut, const QDBusObjectPath &path, const QString &description, const QString &sender);
     qulonglong registerClientAction(const QString &shortcut, const QDBusObjectPath &path, const QString &description);
     qulonglong registerMethodAction(const QString &shortcut, const QString &service, const QDBusObjectPath &path, const QString &interface, const QString &method, const QString &description);
@@ -218,6 +219,7 @@ private:
     X11ByShortcut mX11ByShortcut;
     ShortcutByX11 mShortcutByX11;
     IdsByShortcut mIdsByShortcut;
+    IdsByShortcut mDisabledIdsByShortcut;
     ShortcutAndActionById mShortcutAndActionById;
     IdByClientPath mIdByClientPath;
     SenderByClientPath mSenderByClientPath; // add: path->sender

daemon/main.cpp

@@ -25,7 +25,7 @@
  *
  * END_COMMON_COPYRIGHT_HEADER */
 
-#include <QCoreApplication>
+#include <LXQt/Application>
 
 #include <QString>
 #include <QStringList>
@@ -230,15 +230,16 @@ int main(int argc, char *argv[])
         }
     }
 
-    int ignoreIt = chdir("/");
+    const char* home = getenv("HOME");
+    int ignoreIt = chdir((home && *home) ? home : "/");
     (void)ignoreIt;
 
-    if (configFiles.empty())
+    if (configFiles.empty() && home && *home)
     {
-        configFiles.push_back(QString::fromLocal8Bit(getenv("HOME")) + "/" DEFAULT_CONFIG);
+        configFiles.push_back(QString::fromLocal8Bit(home) + "/" DEFAULT_CONFIG);
     }
 
-    QCoreApplication app(argc, argv);
+    LxQt::Application app(argc, argv);
 
     Core core(runAsDaemon || useSyslog, minLogLevelSet, minLogLevel, configFiles, multipleActionsBehaviourSet, multipleActionsBehaviour);
 

ui/CMakeLists.txt

@@ -6,14 +6,6 @@ set(QT_DBUS_PREFIX "org.qtproject")
 set(LXQT_GLOBALKEYS_LIBRARY lxqt-globalkeys)
 set(${PROJECT_NAME}_HEADER_NAMESPACE "LXQtGlobalKeysUi")
 
-include_directories(
-    "${PROJECT_SOURCE_DIR}"
-    "${CMAKE_CURRENT_BINARY_DIR}"
-    ${LXQT_INCLUDE_DIRS}
-)
-
-add_definitions(-DSHARED_EXPORT=Q_DECL_EXPORT)
-
 set(${PROJECT_NAME}_SOURCES
     shortcut_selector.cpp
 )
@@ -23,7 +15,7 @@ set(${PROJECT_NAME}_MAIN_HEADER
 
 #
 # WARNING: Changing stuff here implies changing this:
-#install(FILES ${${PROJECT_NAME}_PUBLIC_HEADERS} DESTINATION include/${PROJECT_NAME} COMPONENT development RENAME "shortcutselector.h")
+#install(FILES ${${PROJECT_NAME}_PUBLIC_HEADERS} DESTINATION include/${PROJECT_NAME} COMPONENT Devel RENAME "shortcutselector.h")
 #
 set(${PROJECT_NAME}_PUBLIC_CPP_HEADERS
     shortcut_selector.h
@@ -101,7 +93,7 @@ foreach(DBUS_INTERFACE ${${PROJECT_NAME}_DBUS_INTERFACES})
     get_filename_component(DBUS_INTERFACE_FILENAME ${DBUS_INTERFACE} NAME)
     configure_file(
         ${DBUS_INTERFACE}
-        ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}
+        "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}"
         @ONLY
     )
     get_source_file_property(DBUS_INTERFACE_BASENAME ${DBUS_INTERFACE} BASENAME)
@@ -113,11 +105,10 @@ foreach(DBUS_INTERFACE ${${PROJECT_NAME}_DBUS_INTERFACES})
         CLASSNAME ${DBUS_INTERFACE_CLASSNAME}
         NO_NAMESPACE ${DBUS_INTERFACE_NO_NAMESPACE}
     )
-    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES ${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME} ${DBUS_INTERFACE_BASENAME})
+    qt5_add_dbus_interface(${PROJECT_NAME}_DBUS_INTERFACE_FILES "${CMAKE_CURRENT_BINARY_DIR}/${DBUS_INTERFACE_FILENAME}" ${DBUS_INTERFACE_BASENAME})
 endforeach()
 
 qt5_add_resources(${PROJECT_NAME}_RESOURCE_FILES ${${PROJECT_NAME}_RESOURCES})
-qt5_wrap_ui(${PROJECT_NAME}_FORM_FILES ${${PROJECT_NAME}_FORMS})
 
 set(${PROJECT_NAME}_GENERATED_FILES
     ${${PROJECT_NAME}_FORM_FILES}
@@ -133,8 +124,11 @@ set(${PROJECT_NAME}_ALL_FILES
     ${${PROJECT_NAME}_GENERATED_FILES}
 )
 
+set(${PROJECT_NAME}_PKG_CONFIG_REQUIRES "Qt5Widgets, Qt5DBus, ${LXQT_GLOBALKEYS_LIBRARY}")
+
 add_library(${PROJECT_NAME} SHARED ${${PROJECT_NAME}_ALL_FILES})
 target_link_libraries(${PROJECT_NAME}
+    PUBLIC
         Qt5::Widgets
         Qt5::DBus
         ${LXQT_GLOBALKEYS_LIBRARY}
@@ -144,6 +138,20 @@ set_target_properties(${PROJECT_NAME}
     VERSION ${LXQT_VERSION}
     SOVERSION ${LXQT_MAJOR_VERSION}
 )
+target_include_directories(${PROJECT_NAME}
+    INTERFACE "$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}/${LXQT_GLOBALKEYS_UI_LIBRARY_NAME}>"
+)
+
+target_include_directories(${PROJECT_NAME}
+    INTERFACE "$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/include>"
+    INTERFACE "$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}>"
+)
+
+target_compile_definitions(${PROJECT_NAME}
+    PRIVATE "SHARED_EXPORT=Q_DECL_EXPORT"
+)
+
+export(TARGETS ${PROJECT_NAME} APPEND FILE "${CMAKE_BINARY_DIR}/${PROJECT_NAME}-targets.cmake")
 
 include(create_portable_headers)
 create_portable_headers(${PROJECT_NAME}_PORTABLE_HEADERS
@@ -151,11 +159,62 @@ create_portable_headers(${PROJECT_NAME}_PORTABLE_HEADERS
     FILENAMES ${${PROJECT_NAME}_PUBLIC_CLASSES}
 )
 
-install(TARGETS ${PROJECT_NAME} DESTINATION ${LIB_INSTALL_DIR} COMPONENT runtime)
+# Copy public headers for intree building
-install(FILES ${${PROJECT_NAME}_PUBLIC_HEADERS} DESTINATION include/${PROJECT_NAME} COMPONENT development)
+foreach(h ${${PROJECT_NAME}_PUBLIC_HEADERS})
-install(FILES ${${PROJECT_NAME}_PUBLIC_HEADERS} DESTINATION include/${PROJECT_NAME} COMPONENT development RENAME "shortcutselector.h")
+    get_filename_component(bh ${h} NAME)
-install(FILES ${${PROJECT_NAME}_PORTABLE_HEADERS} DESTINATION include/${PROJECT_NAME}/${${PROJECT_NAME}_HEADER_NAMESPACE} COMPONENT development)
+    configure_file("${h}" "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}/${bh}" COPYONLY)
+endforeach()
 
+foreach(h ${${PROJECT_NAME}_PORTABLE_HEADERS})
+    get_filename_component(bh ${h} NAME)
+    configure_file("${h}" "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}/${${PROJECT_NAME}_HEADER_NAMESPACE}/${bh}" COPYONLY)
+endforeach()
 
-include(create_pkgconfig_file)
+foreach(h ${${PROJECT_NAME}_PUBLIC_HEADERS})
-create_pkgconfig_file(${PROJECT_NAME} "LXQt global key shortcuts GUI support library")
+    get_filename_component(bh ${h} NAME)
+    configure_file("${h}" "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/include/${PROJECT_NAME}/shortcutselector.h" COPYONLY)
+endforeach()
+
+install(TARGETS
+    ${PROJECT_NAME}
+    DESTINATION "${CMAKE_INSTALL_LIBDIR}"
+    EXPORT ${PROJECT_NAME}-targets
+    COMPONENT Runtime
+)
+
+install(EXPORT
+    ${PROJECT_NAME}-targets
+    DESTINATION "${LXQT_INSTALL_CMAKE_DIR}/${LXQT_GLOBALKEYS_UI_CMAKE_NAME}"
+    COMPONENT Devel
+)
+
+install(FILES
+    ${${PROJECT_NAME}_PUBLIC_HEADERS}
+    DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PROJECT_NAME}"
+    COMPONENT Devel
+)
+
+install(FILES
+    ${${PROJECT_NAME}_PUBLIC_HEADERS}
+    DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PROJECT_NAME}"
+    COMPONENT Devel
+    RENAME "shortcutselector.h"
+)
+
+install(FILES
+    ${${PROJECT_NAME}_PORTABLE_HEADERS}
+    DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PROJECT_NAME}/${${PROJECT_NAME}_HEADER_NAMESPACE}"
+    COMPONENT Devel
+)
+
+
+lxqt_create_pkgconfig_file(
+    PACKAGE_NAME ${PROJECT_NAME}
+    DESCRIPTIVE_NAME ${PROJECT_NAME}
+    DESCRIPTION "LXQt global key shortcuts GUI support library"
+    INCLUDEDIRS ${PROJECT_NAME}
+    LIBS ${PROJECT_NAME}
+    REQUIRES ${${PROJECT_NAME}_PKG_CONFIG_REQUIRES}
+    VERSION ${LXQT_VERSION}
+    INSTALL
+)

ui/shortcut_selector.h

@@ -40,7 +40,11 @@ namespace GlobalKeyShortcut
 class Client;
 }
 
-class ShortcutSelector : public QToolButton
+#ifndef SHARED_EXPORT
+#define SHARED_EXPORT Q_DECL_IMPORT
+#endif
+
+class SHARED_EXPORT ShortcutSelector : public QToolButton
 {
     Q_OBJECT
 public: