To open a new tab in firefox press the plus button on the right of the tab bar. To close a tab press the button with an x on the right side of the tab. To view your browsing history press the button that looks like a stack of books with the last one at the end the third item down will show you history. To view your downloaded files press the button that looks like three stacked books with a fourth leaning over -> Downloads.
To open a new tab in firefox press the plus button on the right of the tab bar or press :kbd:`Control + t`. To close a tab press the button with an x on the right side of the tab. To view your browsing history press the button that looks like a stack of books with the last one at the end the third item down will show you history. To view your downloaded files press the button that looks like three stacked books with a fourth leaning over -> Downloads.
To go back to a previous page in firefox press the button pointing to the left. To go forward to a page you have visited before but have now gone back from press the button with the arrow pointing to the right. To download a file directly to your local disk right click on the save file as and then you will get options to save the file where you want.
To go back to a previous page in firefox press the button pointing to the left. To go forward to a page you have visited before but have now gone back from press the button with the arrow pointing to the right. To download a file directly to your local disk right click on the save file as and then you will get options to save the file where you want.
To go to a specific url in the address bar you can type it in the the main bar in the middle. If you have a url in your clipboard you can paste it here or into the address bar right click and paste and go.
To go to a specific url in the address bar you can type it in the the main bar in the middle. If you have a url in your clipboard you can paste it here or into the address bar right click and paste and go.
To zoom in if you find the text on a web page to small press control + +. If you want to zoom out on the text or pictures press control + -. To reset to the original zoom press control + 0.
To zoom in if you find the text on a web page to small press :kbd:`control + +`. If you want to zoom out on the text or pictures press :kbd:`control + -`. To reset to the original zoom press :kbd:`control + 0`.
If you want a menubar for firefox right click the tab bar and click the checkbox for menu bar.
If you want to view your firefox prefrences you can type about:preferences into the address bar. To have your seession restored each time you restart firefox is on the general tab of firefox prefrences is to press restore previous session. The tabs section has a checkbox to open links in new tabs instead of new windows which is checked by default. If you want to switch to new tabs immediately check the When you open a link in new tab, switch to it immediately.
@ -9,11 +9,13 @@ To move between cells press the arrow keys. To enter data into cells type in the
To save your spreadsheet you need to press the button that looks like a floppy disk, press the keyboard shortcut or go to :menuselection:`file --> save` . To open a file press the button that looks like a brown folder and add selct the file you want from the dialog.
To save your spreadsheet you need to press the button that looks like a floppy disk, press the keyboard shortcut or go to :menuselection:`file --> save` . To open a file press the button that looks like a brown folder and add selct the file you want from the dialog.
To copy data you can right click copy, press the button with two pieces of paper or press control + c. To paste data press control control +v, edit paste, right click paste or press the botton that is a clipboard with a piece of paper on it. To cut text press control+x or press the sciors button to cut text.
To copy data you can right click copy, press the button with two pieces of paper or press :kbd:`control + c`. To paste data press control :kbd:`control +v`, :menuselection:`edit --> paste`, right click paste or press the botton that is a clipboard with a piece of paper on it. To cut text press :kbd:`control+x` or press the sciors button to cut text.
To change the size of a row or colum of cells click in between the border of that particular row or column and drag with the mouse to give yourself room.
To change the size of a row or colum of cells click in between the border of that particular row or column and drag with the mouse to give yourself room.
To undo a selection press control +z or press the button with the arrow looping around and pointing to the left.
To undo a selection press :kbd:`control +z` or press the button with the arrow looping around and pointing to the left.
To zoom to view a full page on your spreadsheet in the menu :menuselection:`View --> Zoom --> Entire Page`. To view the whole width of your page on the menu :menuselection:`View --> Zoom --> Page Width`.
Screenshot
Screenshot
----------
----------
@ -26,7 +28,7 @@ Lubuntu ships with version 6.1.1.2 of libreoffice Calc.
How to launch
How to launch
-------------
-------------
To launch libreoffice calc in the menu go to :menuselection:`Office -> Libreoffice Calc` or run
To launch libreoffice calc in the menu go to :menuselection:`Office --> Libreoffice Calc` or run
@ -16,9 +16,11 @@ To open a previous presentation you have been working on press the button that l
To type text into a presentation click in one of the boxes for your theme and type in the text with controls for the text on the right hand side. To insert a picture press the button with what looks like a photograph of a tree and select the file you want to insert.
To type text into a presentation click in one of the boxes for your theme and type in the text with controls for the text on the right hand side. To insert a picture press the button with what looks like a photograph of a tree and select the file you want to insert.
To change the zoom of you presentation :menuselection:`View --> Zoom --> Zoom` to bring up a window to manage your zoom.
On the left there is a panel showing what slides you currently have in left side of the window. To insert a new slide right click on this panel on the left and select new slide. To delete a slide on the left hand slide right click and select delete slide.
On the left there is a panel showing what slides you currently have in left side of the window. To insert a new slide right click on this panel on the left and select new slide. To delete a slide on the left hand slide right click and select delete slide.
To start a slideshow press f5 or the button the looks like a tv with a triangle on it or :menuselection:`slideshow --> start from the first slide.` To exit the slideshow press escape. To get to the next slide of the slideshow click or press the right arrow key. to get to a previous slide in presentation mode press the left arrow key or right click previous.
To start a slideshow press :kbd:`f5` or the button the looks like a tv with a triangle on it or :menuselection:`slideshow --> start from the first slide.` To exit the slideshow press escape. To get to the next slide of the slideshow click or press the right arrow key. to get to a previous slide in presentation mode press the left arrow key or right click previous.
@ -16,25 +16,29 @@ Lubuntu ships with libreoffice writer 6.1.1.2
Useage
Useage
------
------
To use libreoffice writer type what you wish to type into the main part of the window. If you wish to save your data press the icon that looks like a floppy disk or press control + s. To open a previously saved document press the button that looks like a folder or press control plus o. To load or save a file from the menu :menuselection:`File --> Open` to open a file or :menuselection:`File --> Save`. To have save your file as a pdf press the button that is a sheet of paper with curved red lines on it or go :menuselection:`File --> Export` and select the file type as pdf.
To use libreoffice writer type what you wish to type into the main part of the window. If you wish to save your data press the icon that looks like a floppy disk or press :kbd:`control + s`. To open a previously saved document press the button that looks like a folder or press :kbd:`control + o`. To load or save a file from the menu :menuselection:`File --> Open` to open a file or :menuselection:`File --> Save`. To have save your file as a pdf press the button that is a sheet of paper with curved red lines on it or go :menuselection:`File --> Export` and select the file type as pdf.
To change the font size There is a drop down box with a number in it you can type the font size you want in this box or select from the dropdown menu. You can change the font with the drop down box to the left of the font size which you can type and it autocompletes the fonts or select from the drop down menu. To make your text bold you can select the text with the mouse and press the button that looks like **B** or press control + B. To make the font italic press the button that looks like *I* or press control + I after selecting the text or keep typing with it to be italic. To make strikethrough press the button that is a s with a line through it.
To change the font size There is a drop down box with a number in it you can type the font size you want in this box or select from the dropdown menu. You can change the font with the drop down box to the left of the font size which you can type and it autocompletes the fonts or select from the drop down menu. To make your text bold you can select the text with the mouse and press the button that looks like **B** or press :kbd:`control + B`. To make the font italic press the button that looks like *I* or press :kbd:`control + I` after selecting the text or keep typing with it to be italic. To make strikethrough press the button that is a s with a line through it.
To change font color press the button that has a T with a drop on it and a red underline this will bring down several differenent colors you can change your text to a color you want.
To change font color press the button that has a T with a drop on it and a red underline this will bring down several differenent colors you can change your text to a color you want.
To make text superscript press the button with A and a smaller B located above it as if it in superscript. To make text subscript press the button that is an A with a smaller B located slightly below it.
To make text superscript press the button with A and a smaller B located above it as if it in superscript. To make text subscript press the button that is an A with a smaller B located slightly below it.
To check the spelling of your document press the ABC button with a checkmark, from the menu -> tools spelling or press f7. After you are done writing your document you can press the button that looks like a printer to print, press control+ p or :menuselection:`file --> print`. To view your word count of how many words are currently in the document is with nothing slected at the bottom of the libreoffice writer window. If you select text with the mouse you can also see the word count of selection from the same spot.
To check the spelling of your document press the ABC button with a checkmark, from the menu -> tools spelling or press :kbd:`f7`. After you are done writing your document you can press the button that looks like a printer to print, press :kbd:`control+ p` or :menuselection:`file --> print`. To view your word count of how many words are currently in the document is with nothing slected at the bottom of the libreoffice writer window. If you select text with the mouse you can also see the word count of selection from the same spot.
To insert special symbols or characters press the button with the Ω symbol or from the menu :menuselection:`Insert --> Special character`. To insert a page break press control + enter or from the menu :menuselection:`Insert --> Page Break`.
To insert special symbols or characters press the button with the Ω symbol or from the menu :menuselection:`Insert --> Special character`. To insert a page break press :kbd:`control + enter` or from the menu :menuselection:`Insert --> Page Break`.
To undo a mistake you make press control + z or press the yellow arrow pointing to the left. If you accidently undid code redo or press the green arrow pointing to the right.
To undo a mistake you make press :kbd:`control + z` or press the yellow arrow pointing to the left. If you accidently undid code redo or press the green arrow pointing to the right or press :kbd:`control + y`.
To center your text is press the button with the horizontal lines centered or :menuselection:`format --> align --> centered`. To have your text justified to the right press the button with the lines on the right or :menuselection:`format --> align --> right`. To have your text aligned to left press the lines on the left with or :menuselection:`format --> align --> left`. To center justify your text which will add spaces in between words to make it appears at both orders press the button that has solid horizontal lines all of eqaul length to center justify the text.
To center your text is press the button with the horizontal lines centered or :menuselection:`format --> align --> centered`. To have your text justified to the right press the button with the lines on the right or :menuselection:`format --> align --> right`. To have your text aligned to left press the lines on the left with or :menuselection:`format --> align --> left`. To center justify your text which will add spaces in between words to make it appears at both orders press the button that has solid horizontal lines all of eqaul length to center justify the text.
If you want to change your line spacing of your document :menuselection:`Format --> Spacing --> Line spacing: 2`.
To insert an image into your go to :menuselection:`Insert --> Image` to insert an image directly to your word processing document. To move your image around left click on it and drag the image around. To resize the image while keeping the same aspect ratio click on one of the blue boxes around the corner to resize the image.
To insert an image into your go to :menuselection:`Insert --> Image` to insert an image directly to your word processing document. To move your image around left click on it and drag the image around. To resize the image while keeping the same aspect ratio click on one of the blue boxes around the corner to resize the image.
To select all text in the document press control + A or :menuselection:`Edit --> Select All`.
To select all text in the document press :kbd:`control + A` or :menuselection:`Edit --> Select All`.
To zoom for the entire page to be visible :menuselection:`View --> Zoom --> Entire Page`. To zoom so you can see the width of the page and everything is bigger :menuselection:`View --> Zoom ---> Page width`.
To open a pdf file use :menuselection:`File --> Open` from the menu or Ctrl + O on the keyboard. If you have a pdf open use :menuselection:`File --> Open` in new tab from the menu, click the Open in new tab button or press Ctrl + T. To refresh a pdf click the Refresh button or press F5 just like most web browsers. To switch between tabs on the keyboard you can press control control +tab to go the next tab or control shift tab to cycle through your tabs in the opposite direction. At the bottom of the tab menu will be a list of all your tabs you have open with the title of each document.
To open a pdf file use :menuselection:`File --> Open` from the menu or :kbd:`Control + O` on the keyboard. If you have a pdf open use :menuselection:`File --> Open` in new tab from the menu, click the Open in new tab button or press :kbd:`Control + T`. To refresh a pdf click the Refresh button or press :kbd:`F5` just like most web browsers. To switch between tabs on the keyboard you can press control :kbd:`control +tab` to go the next tab or :kbd:`control + shift + tab` to cycle through your tabs in the opposite direction. At the bottom of the tab menu will be a list of all your tabs you have open with the title of each document.
If you want to view a particular page select the box (e.g. page 1/3) and tpye the page number (e.g. page 3/3). To move to the previous and next page use the left and right arrow buttons respectively. There are numerous zoom option, including percentage, page width, page size, continous, and multiple pages.
If you want to view a particular page select the box (e.g. page 1/3) and tpye the page number (e.g. page 3/3). To move to the previous and next page use the left and right arrow buttons respectively. There are numerous zoom option, including percentage, page width, page size, continous, and multiple pages. Another way to jump to a particular page is to press :kbd:`control + j` or :menuselection:`Edit --> Jump to Page`. To go back to page which you have just come from press :kbd:`control + enter` or :menuselection:`Edit --> Jump backward`. To jump forward a page press control + shift + enter or :menuselection:`Edit --> Jump Forward`
qpdfview also includes some very useful docks. To view the outline dock, in the menu select :menuselection:`View --> Docks --> Outline (make sure the button is checked)` or press F6 on the keyboard. It should appear on the left hand side of the pdf with collapsable sections. This is useful in navigating large pdfs. To see a thumbnail of each page :menuselection:`View --> Dock --> Thumbnails` or press f8 to view a thumbnial of each page of the pdf file. If you want to close one of these docks press the X button on the dock to close it.
To select text or an image from qpdfview press :kbd:`control+c` or :menuselection:`Edit --> Copy to clipboard`. Then the cursor will turn into a crosshair and you will be able to expand a box to slect either text or an image and a menu to select copying the text, selecting the text, copying the image, and saving the image to file.
To search through your pdf file you can press control + f or from the menu :menuselection:`edit --> search`. You will get taken to the results and will appear highligheted in yellow to see through the results you can press the down arrow to see results farther in the document and press the up arrow to see results towards the start of the document.
To save your pdf file is to :menuselection:`File --> Save` or you can press :kbd:`Control + s`. You can save the file with a different name with :menuselection:`File --> SAve as`. To save a copy of the document click :menuselection:`File --> Save a copy`.
To make qpdfview fullscreen you can press f11. To enter presentation mode you can press f12 wihch is makes the content of the pdf take up the fullscreen and gives you no menubars. To exit presentation mode you can press f12 again. To advance to the next page in the presentation press the spacebar or the right arrow. To go back a page in presentation press the left arrow.
qpdfview also includes some very useful docks. To view the outline dock, in the menu select :menuselection:`View --> Docks --> Outline (make sure the button is checked)` or press :kbd:`F6` on the keyboard. It should appear on the left hand side of the pdf with collapsable sections. This is useful in navigating large pdfs. To see a thumbnail of each page :menuselection:`View --> Dock --> Thumbnails` or press :kbd:`f8` to view a thumbnial of each page of the pdf file. If you want to close one of these docks click the X button on the dock to close it.
If you have a particularly long pdf file you might want to make a bookmark to find a specific thing easily. To create a bookmark press control +B or :menuselection:`Bookmarks --> Add Bookmark` and give the bookmark a memorable title and description so you can find it in this document again easily. If you later want to remove the bookmark go :menuselection:`bookmarks --> remove bookmark` or press control+ shift+ B.
To view two pages at once like if you want to see a two page spread of an illustration in a pdf of a book press :kbd:`Control + 6` or :menuselection:`View --> Two pages`. To get your view back to normal press :kbd:`Control +6` agian or :menuselection:`View --> Two pages` again.
To jump to the start of a pdf file press the home key or :menuselection:`Edit --> First Page`. To jump to the last page of a pdf file press the end key or :menuselection:`Edit --> Last Page`.
To search through your pdf file you can press :kbd:`control + f` or from the menu :menuselection:`edit --> search`. You will get taken to the results and will appear highligheted in yellow to see through the results you can press the down arrow to see results farther in the document and press the up arrow to see results towards the start of the document.
To make qpdfview fullscreen you can press :kbd:`f11`. To enter presentation mode you can press :kbd:`f12` wihch is makes the content of the pdf take up the fullscreen and gives you no menubars. To exit presentation mode you can press :kbd:`f12` again. To advance to the next page in the presentation press the spacebar or the right arrow. To go back a page in presentation press the left arrow.
To make an annotation press :kbd:`Control +A` or :menuselection:`Edit --> Add annotation`. To view the annotation you have made or edit it again press click on what looks like a sticky note with a pin in it. To remove your annotation right click on the annotation and click remove annotation.
To sleect page width in zoom in qpdfview is a drop down menu with page width to show the width of the page on qpdfview. To view the whole page on qpdfview in this drop down menu select whole page. To return to the original zoom press :kbd:`Control + 0` or :menuselection:`View --> Original size`. To zoom in is press the magnifying glass with a + in it or press :kbd:`Control + +` or :menuselection:`View --> Zoom in`. To zoom out press the magnifying glass button with a - in it or press :kbd:`Control + -` or :menuselection:`View --> Zoom out`. To rotate the file to the left is press :kbd:`Control + Left` or :menuselection:`View --> Rotate Left`. To rotate the file to the right is press :kbd:`Control + Rights` or :menuselection:`View --> Rotate Right`.
If you have a particularly long pdf file you might want to make a bookmark to find a specific thing easily. To create a bookmark press :kbd:`control +b` or :menuselection:`Bookmarks --> Add Bookmark` and give the bookmark a memorable title and description so you can find it in this document again easily. If you later want to remove the bookmark go :menuselection:`bookmarks --> remove bookmark` or press :kbd:`control+ shift+ B`.
To jump to the start of a pdf file press the :kbd:`home` key or :menuselection:`Edit --> First Page`. To jump to the last page of a pdf file press the :kbd:`end` key or :menuselection:`Edit --> Last Page`.
To use lximage use the arrow to the right to view the next file in the folder and the arrow to the left to view the previous folder. To open a new picture press the open button which looks like a blue folder with a piece of paper in it. To save the file as something press the button that looks like a floppy disk.
To use lximage use the arrow to the right to view the next file in the folder and the arrow to the left to view the previous folder. To open a new picture press the open button which looks like a blue folder with a piece of paper in it. To save the file as something press the button that looks like a floppy disk.
If you wish to print a picture after viewing it from the :menuselection:`file --> print` or press control+ p to bring up a print dialog.
If you wish to print a picture after viewing it from the :menuselection:`file --> print` or press :kbd:`control+ p` to bring up a print dialog.
To rotate an image to the right press the circular arrrow that points to the right or go to :menuselection:`edit --> rotate clockwise`. To rotate conterclockwise use the circular arrow pointing to the left or :menuselection:`edit -->rotate conterclockwise`. To zoom in on a picture press the icon with a magnifying glass with a + symobol on it or press control + +. To zoom out press the button of a magnifying glass with a - symbol in it or press control + -.
To rotate an image to the right press the circular arrrow that points to the right or go to :menuselection:`edit --> rotate clockwise`. To rotate conterclockwise use the circular arrow pointing to the left or :menuselection:`edit -->rotate conterclockwise`. To zoom in on a picture press the icon with a magnifying glass with a + symobol on it or press :kbd:`control + +`. To zoom out press the button of a magnifying glass with a - symbol in it or press :kbd:`control + -`.
To view the next picture on your image press the right arrow and conversly to view the previous image press the left arrow. To view thumbnials of the current directory you can toggle thumbnials and thumbnails will show at the buttom with a scrollbar at the bottom of the window to view the whole folder.
To flip your image on the vertical axis :menuselection:`Edit --> Flip Vertically`. To flip your image on the horizontal axis :menuselection:`Edit --> Flip Horizonatally`.
To copy an image to the clipboard you can :menuselection:`Copy to Clipboard`. To paste an image to the clipboard :menuselection:`Paste to Clipboard`.
To view the next picture on your image press the right arrow and conversly to view the previous image press the left arrow. To view thumbnials of the current directory you can toggle thumbnials and thumbnails will show at the buttom with a scrollbar at the bottom of the window to view the whole folder. You can also scroll between different pictures with the mousewheel as well. To jump to the first picture press :kbd:`home` or :menuselection:`Go --> First File`. To jump to the last picture press :kbd:`end` or :menuselection:`Go --> Last File`.
To view the picture entirely at its original size press :menuselection:`View --> Fit` or the button with a veritcial and horizontal arrow and a folded over buttom right corner. To return your image to its original size press the magnifying button with 1:1 inside it or :menuselection:`View --> Original Size`.
To view the picture entirely at its original size press :menuselection:`View --> Fit` or the button with a veritcial and horizontal arrow and a folded over buttom right corner. To return your image to its original size press the magnifying button with 1:1 inside it or :menuselection:`View --> Original Size`.
To view the picture as fullscreen press f11 or :menuselection:`View --> Fullscreen`.
To view the picture as fullscreen press :kbd:`f11` or :menuselection:`View --> Fullscreen`.
Screenshot
Screenshot
----------
----------
@ -33,4 +37,4 @@ To launch lximage from the menu :menuselection:`graphics --> lximage` or run
lximage-qt
lximage-qt
from the command line.
from the command line. The icon for lximage-qt is an orange landscape scene of a sunset.
@ -9,6 +9,8 @@ To use screenshot the whole screen takes a screenshot of your entire screen, cur
To have your titlebar and frame around the window on a current window is a checkbox on the bottom. The include mouse cursor will include your mouse cursor in the screenshot.
To have your titlebar and frame around the window on a current window is a checkbox on the bottom. The include mouse cursor will include your mouse cursor in the screenshot.
After taking your screenshot it will open up in the image viewer and to save it press :kbd:`Control + S` or :menuselection:`File --> Save`.
Screenshot
Screenshot
----------
----------
..image:: screenshot.png
..image:: screenshot.png
@ -24,4 +26,4 @@ To launch screenshot from the menu :menuselection:`Grapics --> Screenshot` or ru
lximage-qt -s
lximage-qt -s
from the command line. Pressing the printscreen key also brings up the screenshot dialog.
from the command line. Pressing the printscreen key also brings up the screenshot dialog. The icon to launch screenshot looks like a camera.
@ -9,13 +9,15 @@ Lubuntu ships with version 2.1.0 of skanlite.
Useage
Useage
------
------
To preview what you want to scan press the preview button and you can make sure the scan is in a good position. With this done you can press the scan button to scan the document after this a dialog will show up asking you were to save what you are scanning.
To preview what you want to scan press the preview button and you can make sure the scan is in a good position. With this done you can press the scan button to scan the document after this a dialog will show up asking you were to save what you are scanning. If you want to cancel your scan midway through the scan click on the red x button to cancel the scan while the scan is in progress.
To change the dpi or dots per inch is the dpi drop down menu for scanner resolution but keep in mind the higher the number of dpi the better the picture quality but the longer it will take to scan. The scan mode changing allows you to select color to select color scanning or gray to only show your scan in gray and not use color ink if you would want to print it out again.
To zoom in press the magnifying glass button with a plus sign conversely to move out press the magnifying glass button with a minus sign. To change your resolution change the scan resolution drop down and select the dots per inch you want to use.
To zoom in press the magnifying glass button with a plus sign conversely to move out press the magnifying glass button with a minus sign. To change your resolution change the scan resolution drop down and select the dots per inch you want to use.
To change the brightness of a scan slide the slider or input an a positive or negative number into the the numeric field. To change constrast slide the slider or input a positive or negative number in the numeric field.
To change the brightness of a scan slide the slider or input an a positive or negative number into the the numeric field. To change constrast slide the slider or input a positive or negative number in the numeric field.
To clear selections that can be automatically selected but canceled with a brown smudge with an x on it.
To select part of a scan you particularly want to save is to click over a preview of a scan and you will drag the selection with the mouse. To clear selections that can be automatically selected but canceled with a brown smudge with an x on it.
If you wish to open a text file press the button that looks like a black and white folder or press control + o to open a file. To open a new file press the button that looks like a piece of paper with a plus sign. To save your file after typing in the main part of the window press the button that looks like a floppy disk or press controlTo save your file after typing in the main part of the window press the button that looks like a floppy disk or press control +s. To reload a file if something else has changed that file in featherpad press the arrow that loops back on itself to reload the page.
If you wish to open a text file press the button that looks like a black and white folder or press :kbd:`control + o` to open a file. To open a new file press the button that looks like a piece of paper with a plus sign. To save your file after typing in the main part of the window press the button that looks like a floppy disk or press controlTo save your file after typing in the main part of the window press the button that looks like a floppy disk or press :kbd:`control +s`. To reload a file if something else has changed that file in featherpad press the arrow that loops back on itself to reload the page.
To type things into your text file the main part of the window similar to a word porcessor. If you are programming with featherpad the file extension will probably automatically select the correct syntax highlighting. To view line numbers of the file press control +l or :menuselection:`options --> line numbers`.
To type things into your text file the main part of the window similar to a word porcessor. If you are programming with featherpad the file extension will probably automatically select the correct syntax highlighting. To view line numbers of the file press :kbd:`control +l` or :menuselection:`options --> line numbers`.
To open a new tab and empty text file press the button with a piece of paper with a plus symbol on it. If you wish to close a tab press the red x button.
To open a new tab and empty text file press the button with a piece of paper with a plus symbol on it. If you wish to close a tab press the red x button.
If you make a mistake and want to undo it press control + z or press the button that looks like a curved arrow pointing towards the left. To redo a change you have undone press the button with a curved arrow pointing towards the right.
If you make a mistake and want to undo it press :kbd:`control + z` or press the button that looks like a curved arrow pointing towards the left. To redo a change you have undone press the button with a curved arrow pointing towards the right.
To search your text file press Control + F or search find from the menu. Then in the bar on the bottom search for the text you want. Press the down arrow to move to the next result and the up arrow to move for the previous result in the text file. To jump to a particular line in a file press control +j or search jump to or the button that looks like >>. Then in the bar at the bottom type in what line you want to jump to. To find and replace text press control +r or :menuselection:`search --> Replace`. Type the text you want to Find in the find field and type what you want to put in with the Replace with field and then press enter to finish the finding and replacing through the whole file.
To search your text file press :kbd:`Control + f` or :menuselection:`search --> find` from the menu. Then in the bar on the bottom search for the text you want. Press the down arrow to move to the next result and the up arrow to move for the previous result in the text file. To jump to a particular line in a file press :kbd:`control +j` or search jump to or the button that looks like >>. Then in the bar at the bottom type in what line you want to jump to. To find and replace text press :kbd:`control +r` or :menuselection:`search --> Replace`. Type the text you want to Find in the find field and type what you want to put in with the Replace with field and then press enter to finish the finding and replacing through the whole file.
To change what font you want select :menuselection:`option --> font` to change your font sizes. To change each font on the on the font level. To change the size type the size you or select it from the drop down menu. To select a font size simply use a font style of italic or oblique.
To change what font you want select :menuselection:`option --> font` to change your font sizes. To change each font on the on the font level. To change the size type the size you or select it from the drop down menu. To select a font size simply use a font style of italic or oblique.
To print a text :menuselection:`file --> Print` or press control + p.
To print a text :menuselection:`file --> Print` or press :kbd:`control + p`.
Screenshot
Screenshot
----------
----------
@ -39,9 +39,9 @@ Lubuntu ships with version 0.9.0 of featherpad.
How to Launch
How to Launch
-------------
-------------
In the menu go to Acessories -> featherpad or run
In the menu go to :menuselection:`Acessories --> featherpad` or run
..code::
..code::
featherpad
featherpad
from the command line.
from the command line. The icon for Featherpad looks like a pad of paper with a feather on it.
@ -19,7 +19,7 @@ To do simple arithmetic click the numbers and then press the sign for addition,
To make a number negative press the button that looks like a +/-. To insert decimals press the decimal point button which looks like . when you get to the part which is less than a whole number. To clear input from Kcalc Press the button with a C on it. To group operations so they happen together use the parenthesis to make things grouped to gether for example 2*(2+3) would give the result of 10 because it would add 2 and 3 and then multiply by two.
To make a number negative press the button that looks like a +/-. To insert decimals press the decimal point button which looks like . when you get to the part which is less than a whole number. To clear input from Kcalc Press the button with a C on it. To group operations so they happen together use the parenthesis to make things grouped to gether for example 2*(2+3) would give the result of 10 because it would add 2 and 3 and then multiply by two.
To copy and answer out of Kcalc press control + c or :menuselection:`edit --> copy` from the menu. To paste a number into Kcalc you can press control + v or :menuselection:`edit --> paste` from the menu. To cut the text from Kcalc press control +x or :menuselection:`edit --> cut` from the menu.
To copy and answer out of Kcalc press :kbd:`control + c` or :menuselection:`edit --> copy` from the menu. To paste a number into Kcalc you can press :kbd:`control + v` or :menuselection:`edit --> paste` from the menu. To cut the text from Kcalc press :kbd:`control +x` or :menuselection:`edit --> cut` from the menu.
Scientific calculator mode advanced fuctionality
Scientific calculator mode advanced fuctionality
------------------------------------------------
------------------------------------------------
@ -38,10 +38,10 @@ Lubuntu ships with version 18.04.3 of Kcalc.
How to launch
How to launch
-------------
-------------
To launch kcalc go to :menuselection:`accessories -> Kcalc` or run
To launch kcalc go to :menuselection:`accessories --> Kcalc` or run
..code::
..code::
kcalc
kcalc
from the command line.
from the command line. The icon for kcalc looks like a box with a + sign a - sign a multipliucation sign and an equals sign.
Along the top to create a new tab in pcmanfm-qt you can use the button with a file and a plus on it to open a new tab or press control +t. The left pointing arrow button is a back button while the right pointing arrow button moves you forward in the directories that you have moved in the file manager. The button for the arrow pointing upward is to go up one level in the directory tree to the so called parent directory. To rename your files right click on the file and click rename.
Along the top to create a new tab in pcmanfm-qt you can use the button with a file and a plus on it to open a new tab or press :kbd:`control +t`. The left pointing arrow button is a back button while the right pointing arrow button moves you forward in the directories that you have moved in the file manager. The button for the arrow pointing upward is to go up one level in the directory tree to the so called parent directory. To rename your files right click on the file and click rename or press :kbd:`f2`.
If you single click on a file you will select it. If you double click on it you will open it in the default program to open that file. If you right click on a file you can select which program to open a file with if you have multiple programs to open it. If you want to selct multiple files you can hold down control and select the files. To copy files select the file right click copy or press control +c. To cut files select them right click cut and or press control + x. After copying or cutting a file you can paste them with right click paste or press control +v.
If you single click on a file you will select it. If you double click on it you will open it in the default program to open that file. If you right click on a file you can select which program to open a file with if you have multiple programs to open it. If you want to selct multiple files you can hold down control and select the files. To copy files select the file right click copy or press :kbd:`control +c`. To cut files select them right click cut and or press :kbd:`control + x`. After copying or cutting a file you can paste them with right click paste or press :kbd:`control +v`.
To connect to a remote server such as a NAS go to the :menuselection:`go --> Connect to server` and authenticate to your remote storage. If you want to plug in removeable storage you can open the storage on the left with devices. This also happens other internal filesystems on your computer. To eject removeable media press the button on the left with a circled up arrow to eject.
To connect to a remote server such as a NAS go to the :menuselection:`go --> Connect to server` and authenticate to your remote storage. If you want to plug in removeable storage you can open the storage on the left with devices. This also happens other internal filesystems on your computer. To eject removeable media press the button on the left with a circled up arrow to eject.
To see hidden files press control +h or go to:menuselection:`view -> show hidden`. To open a terminal in your current folder press f4 or :menuselection:`Tool --> Open terminal` from the menu. To search for files press f3 or :menuselection:`Tool --> search` for files. To view the properties of a file or folder right click on it and select properties from the menu. General will show you the size of the file where the file is and when it was last modified or accessed. The permissions tab will show you who owns the file which if you can't change it will be grayed out and who has permisson to read modify and execute the file.
To see hidden files press :kbd:`control +h` or go to:menuselection:`view -> show hidden`. To open a terminal in your current folder press :kbd:`f4` or :menuselection:`Tool --> Open terminal` from the menu. To search for files press :kbd:`f3` or :menuselection:`Tool --> search` for files. To view the properties of a file or folder right click on it and select properties from the menu. General will show you the size of the file where the file is and when it was last modified or accessed. The permissions tab will show you who owns the file which if you can't change it will be grayed out and who has permisson to read modify and execute the file.
Pcmanfm-qt can actually launch other applications in places Applications and then gets all the tasks in the menu in lxqt-panel.
Pcmanfm-qt can actually launch other applications in places Applications and then gets all the tasks in the menu in lxqt-panel.
To add a bookmark :menuselection:`Bookmarks --> Add to Bookmarks` and it will make a bookmark. To later access this bookmark it will be on the left hand side under bookmarks and under the bookmarks menu.
To add a bookmark :menuselection:`Bookmarks --> Add to Bookmarks` and it will make a bookmark. To later access this bookmark it will be on the left hand side under bookmarks and under the bookmarks menu.
Pcmanfm-Qt has different view modes which can be changed in the view menu. To select a view that has bigger thumbnails to view pictures before deciding to open them :menuselection:`View --> View --> Thumbnail View`. If you want to view lists of move data about something like the file size the time it is modified select detailed list view by :menuselection:`View --> View --> Detailed list view`. If you really want to have see as many files in a small area use the compact view or :menuselection:`View --> View --> Compact View`. To return to the original view of pcmanfm-qt is to :menuselection:`View --> View --> Icon View`.
Screenshot
Screenshot
----------
----------
..image:: pcmanfm-qt.png
..image:: pcmanfm-qt.png
@ -44,4 +46,4 @@ To open PCManFM in your current directory (in terminal), execute
Feel free to append [lxqt-sudo] to run PCManFM-Qt as root.
Feel free to append [lxqt-sudo] to run PCManFM-Qt as root.
You can also go to the Applications menu :menuselection:`Accessories --> PCManFM-Qt File Manager`.
You can also go to the Applications menu :menuselection:`Accessories --> PCManFM-Qt File Manager`. There also is a keyboard shortcut for launching pcmanfm-qt of :kbd:`Super + E`. The icon for pcmanfm-qt looks like a file cabinet drawer with files in it at the top.
@ -6,7 +6,7 @@ Qlipper is a clipboard manager that is included by default on Lubuntu.
Useage
Useage
------
------
To use qlipper it is autostarted in the panel and click on the system tray icon that looks like a clipboard or you can press Control+Alt+v. If you really want an item to always show up right click on the clipboard and press the configure wrench icon click on the sticky items divider and press the add button and add what you want always to be listed in qlipper. To change how many items get displayed in qlipper in total right click on qlipper and configure with the wrench icon and change clipboard entries count to your desired number of entries. To change how many characters show up on qlipper from the same configuration screen change maximum display size.
To use qlipper it is autostarted in the panel and click on the system tray icon that looks like a clipboard or you can press :kbd:`Control+Alt+v`. If you really want an item to always show up right click on the clipboard and press the configure wrench icon click on the sticky items divider and press the add button and add what you want always to be listed in qlipper. To change how many items get displayed in qlipper in total right click on qlipper and configure with the wrench icon and change clipboard entries count to your desired number of entries. To change how many characters show up on qlipper from the same configuration screen change maximum display size. If you want to clear your clipboard history right click on the tray icon and clear clipboard history.
To start a new note right click on the right hand column new note or :menuselection:`Edit --> New Note`. Then enter a title for this note. To open a note double click on that note from the right hand column which will open a new window with your note in it. To input text in the note type in the main body of this window after clicking on it.
To start a new note right click on the right hand column new note or :menuselection:`Edit --> New Note`. Then enter a title for this note. To open a note double click on that note from the right hand column which will open a new window with your note in it. To input text in the note type in the main body of this window after clicking on it.
If you wish to delete a notebook right click on a notebook and delete notebook, or with the notebook highlighted press :kbd:`Control + D`, or :menuselection:`Edit --> Delete notebook`.
To delete a note click on the note and press the button with a page X on it, press :kbd:`Control + Shift + D` or edit :menuselection:`Edit --> Delete note`.
If you make a mistake tpying and want to undo your changes press :kbd:`Control + z` or :menuselection:`Edit --> Undo`. If you wish to paste text into noblenote press :kbd:`Control + v` or :menuselection:`Edit --> Paste`.
to bring back up your note noblenote will leave a notebook icon in the system tray on the lower right hand corner of the panel by default which can bring back up the noblenote window.
to bring back up your note noblenote will leave a notebook icon in the system tray on the lower right hand corner of the panel by default which can bring back up the noblenote window.
@ -5,7 +5,7 @@ VLC is the default media player for Lubuntu that can open both audio and video f
Useage
Useage
------
------
To open media stored locally on your system click media open :menuselection:`media --> Open file` and navigate your local files or press control +o on the keyboard to open files stored locally on your machine. If you wish to open media from somewhere on the internet on :menuselection:`media --> open network stream` or press control + n. To open a whole directory use :menuselection:`media --> Open Directory` or press control +F.
To open media stored locally on your system click media open :menuselection:`media --> Open file` and navigate your local files or press :kbd:`control +o` on the keyboard to open files stored locally on your machine. If you wish to open media from somewhere on the internet on :menuselection:`media --> open network stream` or press :kbd"`control + n`. To open a whole directory use :menuselection:`media --> Open Directory` or press :kbd:`control +F`.
To pause playback of a file press the button that look like two verical lines. To resume playback press the right playback button. To toggle fullscreen press the button which has the four corners of the screen to make it fullscreen and the four screens to have it back into windowed mode.
To pause playback of a file press the button that look like two verical lines. To resume playback press the right playback button. To toggle fullscreen press the button which has the four corners of the screen to make it fullscreen and the four screens to have it back into windowed mode.
@ -17,13 +17,12 @@ To see how long you have been watching the current piece of media counts up abov
To open an equalizier press the button that looks like several physical slider swichtes and on the audio effects equalizer tab press enable on the equalizer. Then to increase or decrease the sound at each frequency up to increase the volcume at that frequency.
To open an equalizier press the button that looks like several physical slider swichtes and on the audio effects equalizer tab press enable on the equalizer. Then to increase or decrease the sound at each frequency up to increase the volcume at that frequency.
To view a playlist of music or videos you can view press the button that is several horizontal lines and then a trianglular play button on it. This will bring up a whole view of your playlist. To add more files to your playlist right click on the bottom of the playlist window and click add file to add an additonal file. To move the playlist to a particular file and to have that play double click that file. To change the view of the playlist right click playlist view mode to the version of the playlist you like the look of the best.
To view a playlist of music or videos you can view press the button that is several horizontal lines and then a trianglular play button on it or press :kbd:`Control + l`. This will bring up a whole view of your playlist. To add more files to your playlist right click on the bottom of the playlist window and click add file to add an additonal file. To move the playlist to a particular file and to have that play double click that file. To change the view of the playlist right click playlist view mode to the version of the playlist you like the look of the best.
To loop the current playlist over and over press the button with an arrow pointing to the right and then another arrow below it pointing to the left.
To loop the current playlist over and over press the button with an arrow pointing to the right and then another arrow below it pointing to the left.
To randomize your playlist press the button with two crossing arrows on it.
To randomize your playlist press the button with two crossing arrows on it.
To speed up playback faster than normal press the + key or use :menuselection:`Playback --> Speed --> Faster`. To slow down playback slower than normal press the - key :menuselection:`Playback --> Speed --> Slower`.
To speed up playback faster than normal press the :kbd:`+` key or use :menuselection:`Playback --> Speed --> Faster`. To slow down playback slower than normal press the :kbd:`-` key :menuselection:`Playback --> Speed --> Slower`.
@ -5,7 +5,8 @@ qterminal is the default terminal of Lubuntu that also has a drop down version.
Useage
Useage
------
------
To open a new tab go to the file menu -> new tab or press control shift t with the button that looks like a +. To close a tab press the X button near the right hand side of the tab. If you want to switch between tabs click on the different click on that tab or press the left and right arrows in the upper right corner on the tabbar. Another way to switch between tabs is control + page up or control plus page down. If you want to copy text from the temrinal press control + shift + c to copy text. If you wish to paste text into the terminal you can control + shift + v however you should be really careful it is not a malicious command and shows the command you are pasting in. If you want to open a new terminal window Control+ Shift+ N or go :menuselection:`file --> new window`.
To open a new tab go to the :menuselection:`file --> new tab` or press :kbd:`control + shift + t` or click the button that looks like a +. To close a tab press the X button near the right hand side of the tab. If you want to switch between tabs click on the different click on that tab or press the left and right arrows in the upper right corner on the tabbar. Another way to switch between tabs is :kbd:`control + page up` or :kbd:`control + page down`. If you want to copy text from the temrinal press :kbd:`control + shift + c` to copy text. If you wish to paste text into the terminal you can :kbd:`control + shift + v` however you should be really careful it is not a malicious command and shows the command you are pasting in. If you want to open a new terminal window :kbd:`Control+ Shift+ N` or go :menuselection:`file --> new window`.
If you want to connect to a network on nm-tray left click the icon in the system tray. If you have a wired connection with DHCP it should connect automatically. If you want to disconnect your from a network under active connections left click to disconnect. To connect to wifi left click on the nm-tray applet and connect the wifi name applet and then enter the password for the wifi.
If you want to connect to a network on nm-tray left click the icon in the system tray. If you have a wired connection with DHCP it should connect automatically. If you want to disconnect your from a network under active connections left click to disconnect. To connect to wifi left click on the nm-tray applet and connect the wifi name applet and then enter the password for the wifi.
After connecting to a wifi your known connections will by left clicking on nm-tray of wifi connections under known connections. The list of active connections are networks you are currently connected to. The list of wifi networks is listed under wifi networks you are connected to.
After connecting to a wifi your known connections will by left clicking on nm-tray of wifi connections under known connections. The list of active connections are networks you are currently connected to. The list of wifi networks is listed under wifi networks you are connected to.
To get information on your current connection to the network your can right click on nm-tray to connection information to get info on your current Ip address connection speed and driver in use for the connection.
@ -9,10 +9,14 @@ Lubuntu ships with version 1.10.18 of qps.
Useage
Useage
------
------
To see your memory useage in qps look at the bar that says MEM. The bar for CPU useage shows CPU useage with a bar graph with useage with a bar graphc for cpu useage. The Uptime in the top bar shows how long your computer has been running.
To see your memory useage in qps look at the bar that says MEM. The bar for CPU useage shows CPU useage with a bar graph with useage with a bar graphc for cpu useage. The Uptime in the top bar shows how long your computer has been running. A blue bar showing file input output shows graph in blue. Above this there is a green graph that shows your CPu useage as a graph.
To sort your processes by memory click on the mem tab. To have your processes sorted by CPU percentage press the button CPU% To have your processes sorted by CPU%. To sort by the command line of each process you can press the command line.
To sort your processes by memory click on the mem tab. To have your processes sorted by CPU percentage press the button CPU% To have your processes sorted by CPU%. To sort by the command line of each process you can press the command line.
To change the update period is to :menuselection:`Option --> Update Period`. To change your font :menuselection:`Option --> Prefrences` or put an appearance with the font and font size.
To search for a particular process you can type your type into the search bar right above a particular process right above it. To terminate a process right click on it and select terminate or press :kbd:`delete`. To kill a process move the mouse over it right click and select kill or press :kbd:`Alt + K`.
@ -14,7 +14,9 @@ If you use a single monitor you can change your single monitor resolution on the
If you want to rotate a monitor on the advanced tab from the menu labeled rotation choose the way you want to rotate the monitor with inverted being upsdie down. Below you can also choose the refresh rate of monitor from the drop down menu to choose how fast your monitor refreshes.
If you want to rotate a monitor on the advanced tab from the menu labeled rotation choose the way you want to rotate the monitor with inverted being upsdie down. Below you can also choose the refresh rate of monitor from the drop down menu to choose how fast your monitor refreshes.
To display info on your monitor click the info tab and read that info.
To display info on your monitor click the info tab and read that info. The fields explained will be the NAme of the monitor the serial numberthe size of the display and the serial number.
To save your monitor settings press the save button and a pop up will show that your have your settings ok for you and press yes. The saved setting will save with a name for your time. If you want to apply your saved settings press the settings button with the wrench and screwdriver. To choose your saved settings press the apply button and your settings will be applied. To give your saved settings a meaninful name you can press the rename button with a name for what you want and can remember what it is. If you want to delete theese setting later press the delete button.
With multiple monitors you can in the set position you can drag the different screen around drag the two monitors around. The fast menu extended view sets you to set extended showing different things on different monitors. Selecting a unified view shows the same thing on both screens. First only shows up the first screen while second only shows only the second.
With multiple monitors you can in the set position you can drag the different screen around drag the two monitors around. The fast menu extended view sets you to set extended showing different things on different monitors. Selecting a unified view shows the same thing on both screens. First only shows up the first screen while second only shows only the second.
@ -15,7 +15,9 @@ The appearance tab lets you change where the buttons are so for is you want and
The font tab changes the font of your window titlebars you can select several different fonts for different conditions of the window. To change the style of the font you can under the style make the font inactive. For example if you have trouble telling which window you are in you can make the font italic for the titlebar of inactive windows to make it even more obvious.
The font tab changes the font of your window titlebars you can select several different fonts for different conditions of the window. To change the style of the font you can under the style make the font inactive. For example if you have trouble telling which window you are in you can make the font italic for the titlebar of inactive windows to make it even more obvious.
The mouse tab use the focus follow mouse tab is if you move the mouse over the window it will automatically focus on that window.
The move and resize tab lets you change settings for moving and resizing windows. The update window contents when reisizing redraws the whole window when resizing it. Having it off will have a drawn solid color until you stop resizing it. The drag threshold distance changes the minimum number of pixels to drag a window. The switch desktops when moving a window past the edge of a the screen lets you drag a window past the edge to switch desktops. The field for time lets you cahnge the amount of time to wait before moving beyond the edge of the desktop to another virtual desktop.
The mouse tab use the focus follow mouse tab is if you move the mouse over the window it will automatically focus on that window. The titlebar drop down of doubleclicking on the titlebar what option fo to shade or maiximize the window or custom actions which lubuntu has set to maximize.
On the desktop tab to change number of desktops press the up arrow to add an additional desktop or the down arrow to reduce the number of virtual desktops. When switching desktops there is a checkbox to show a notification and a field for how many miliseconds to show that notification for.
On the desktop tab to change number of desktops press the up arrow to add an additional desktop or the down arrow to reduce the number of virtual desktops. When switching desktops there is a checkbox to show a notification and a field for how many miliseconds to show that notification for.
LXQt power management watches your battery, laptop lid, and idleness on the screen. Each one of the checkbox is to battery laptop lid and idleness is a checkbox to enable or disable each. When you add when power is low select what you want to do suspend shutodwn hibernate or something. The lid watcher lets you choose to suspend or shut off your computer when the lid is closed on battery or on AC.
LXQt power management watches your battery, laptop lid, and idleness on the screen. Each one of the checkbox is to battery laptop lid and idleness is a checkbox to enable or disable each. When you add when power is low select what you want to do suspend shutodwn hibernate or something. The lid watcher lets you choose to suspend or shut off your computer when the lid is closed on battery or on AC.
On a laptop power management should show a + with a ring around it represeneting your current battery charge on your laptop when it is charging with a full green circle meaning you are fully charged in the system tray. If your battery is discharging you will see a - sybmol at the center of the circle. If you hover the mouse cursor over this it will show the percent of charge as a percentage and whether the battery is charging or discharging. When your battery is fully charged it will turn into a black circle.
@ -9,7 +9,9 @@ To change the window manager used by LXQt, on the basic settings tab use the dro
The checkbox for ask confirmation for leaving session gives you a simple yes no dialog to amke sure you really want to leave so you do not lose your work uncheck it if you do not want this and find this dialog annoying. The lock screen before suspending /hibrenating locks your screen before suspending and hibernating and is checked by default unchecking this will leave this so the screen is not unlocked after suspending or hibernating.
The checkbox for ask confirmation for leaving session gives you a simple yes no dialog to amke sure you really want to leave so you do not lose your work uncheck it if you do not want this and find this dialog annoying. The lock screen before suspending /hibrenating locks your screen before suspending and hibernating and is checked by default unchecking this will leave this so the screen is not unlocked after suspending or hibernating.
The auto-start applications lets you choose which applications to auto-start like managers for print queues. All of these are check-boxes to start various programs. You can start a program at startup by adding it here. Click the add button, give the process a name e.g. "Terminal drop down" and type in the appropriate terminal command e.g. "terminal -d"
The autostart applications lets you choose which applications to autostart like managers for print queues. All of these are check-boxes to start various programs. You can start a program at startup by adding it here. Click the add button, give the process a name e.g. "Terminal drop down" and type in the appropriate terminal command e.g. "terminal -d"
If you want to undo changes you have done press the reset button with brown smudge with an X and reset on it.
To create a new useage create a new user enter your password to make sure it is really you enter the users name and username then enter the new password twice by hand. To change the users permission click account type and enter your password and select desktop user to not give permission to change the system or admin to change system settings.
To create a new useage create a new user enter your password to make sure it is really you enter the users name and username then enter the new password twice by hand. To change the users permission click account type and enter your password and select desktop user to not give permission to change the system or admin to change system settings.
To change your users password you can press on the button with a key and enter the new password and enter new password and then use a password to authenticate that you have permission to do this.
@ -10,12 +10,18 @@ Lubuntu ships with version 0.4.0 of Window effects.
Useage
Useage
------
------
To toggle enable client side shadows press the Enable client side shadows checkbox.
To toggle enable client side shadows press the Enable client side shadows checkbox. The checkbox for Aviod drawing shadows on dock/panel windows will stop drawing shadows on the panel. The label for color lets you change the color of your shadows. The field for blur radius for shadows changes how big to blur the shadows. The left offset for shadows is how far to move the shadows to the left with a larger number makes the shadow appear farther to the right. The top offset for shadows the larger the number farther down the shadow appears below the window. The field for translucany of for shadows is how opaque or clear to make the shadows 1 is opqaque shadows and 0 is clear.
The opacity tab is for transparency settings. Setting Opacity to 1.00 makes it opaque while 0 makes it entirely clear. Menus, inactive windows, active windows titlebars and borders all can have their opacity changed indepently.
The opacity tab is for transparency settings. Setting Opacity to 1.00 makes it opaque while 0 makes it entirely clear. Menus, inactive windows, active windows titlebars and borders all can have their opacity changed indepently.
Fading windows can have some differences. There is a checkbox for fading window during opactity changes so if the opacity changes it will smoothly fade. With this settings windows will fade in and out when opened and closed unless you don't them to which you can press the Avoid fade in out when windows opening and closing.
Fading windows can have some differences. There is a checkbox for fading window during opactity changes so if the opacity changes it will smoothly fade. With this settings windows will fade in and out when opened and closed unless you don't them to which you can press the Avoid fade in out when windows opening and closing.
To have your settings applied you will need to press the apply button. If you want to cancel your changes press the cancel button.
Screenshot
----------
..image:: window_effects.png
How to Launch
How to Launch
-------------
-------------
To launch window effects from the menu :menuselection:`Preferences --> LXQt Settings --> Window effects` or run
To launch window effects from the menu :menuselection:`Preferences --> LXQt Settings --> Window effects` or run
@ -5,7 +5,7 @@ Pritners allows you to configure your printer and show your print queue.
Useage
Useage
------
------
To view your print queue right click on the printer and right click view print queue and if a job is held you can restart it.
To view your print queue right click on the printer and right click view print queue or with the printer slected press :kbd:`Control+F`and if a job is held you can restart it. To view the properties of printer or make changes with :menuselection:`Printer --> Properties`.
@ -17,10 +17,17 @@ To change the useage Qt widget will change the buttons and tooblbars look on lub
The icons theme changes desktop icons on your computer and if you click on the icon theme which is previewed on horizontal rows.
The icons theme changes desktop icons on your computer and if you click on the icon theme which is previewed on horizontal rows.
The tab for LXQt theme lets you change how the panel and notifictions appear.
To change the font size that desktop applications use choose the font tab and use the point size and enter in the size you want or use the up and down arrows to increase or decrease font size respectively. To change the default font there is a drop down box for font name that you can type the font name you or select from the drop down menu. The checkbox for antialias and font hinting for fonts lets you also set antialiased fonts which are enabled for easier screen viewing. The DPI sets the resolution of your screen or dots per inch.
To change the font size that desktop applications use choose the font tab and use the point size and enter in the size you want or use the up and down arrows to increase or decrease font size respectively. To change the default font there is a drop down box for font name that you can type the font name you or select from the drop down menu. The checkbox for antialias and font hinting for fonts lets you also set antialiased fonts which are enabled for easier screen viewing. The DPI sets the resolution of your screen or dots per inch.
The cursor theme lets you change how the cursor looks with two themes installed by default but more available in the package repositories.
The cursor theme lets you change how the cursor looks with two themes installed by default but more available in the package repositories.
If you want to reset your changes you will need to click the reset button to revert your changes to how they were before.
How to launch
How to launch
-------------
-------------
To launch appearnce in the menu :menuselection:`Preferences --> Lxqt settings --> appearance`. Another way is to press the Appearance button from LXQt configuration center or run
To launch appearnce in the menu :menuselection:`Preferences --> Lxqt settings --> appearance`. Another way is to press the Appearance button from LXQt configuration center or run
If you want to toggle synchronizing the time of network press the radio button of Enable network time synchronization button. To change the timezone of your computer press the timezone gear and select your time zone from the long list.
If you want to toggle synchronizing the time of network press the radio button of Enable network time synchronization button. To change the timezone of your computer press the timezone gear and select your time zone from the long list.
If you do not wish to synchronize your clock via network time protocol. Once you want to be able to change your time locally you will be able to change it in the time put will type your time in the time in the time by typing a new time in.
@ -10,7 +10,7 @@ Lubuntu ships with 0.13.0 of Desktop.
Useage
Useage
------
------
To change the desktop background you can either type the path of the file you can type in Wallpaper image file or use browse to bring up a dialog to choose which the desktop.
To change the desktop background you can either type the path of the file you can type in Wallpaper image file or use browse to bring up a dialog to choose which the desktop. The drop down of wallpaper mode lets you change how the image you select for a wallpaper changes. If you want an image to have multiple copies of a smaller image select tile image from the drop down. If you do not want an image and just a solid color select fill with background color only.
The drop down menu for icon size lets you choose a different size of desktop icons you can chooose a size that looks good on your screen.
The drop down menu for icon size lets you choose a different size of desktop icons you can chooose a size that looks good on your screen.
@ -5,7 +5,7 @@ Desktop notifications are the settings for your desktop notifactions such as whe
Useage
Useage
------
------
To change where Desktop notifications appear on your screen click the button that appears on the portion of your screen where you want them with the outline being your window under the basic settings tab. To change duration of desktop notifications there is up and down to add or reduce the number of seconds to show notifications for the default is 10 seconds. The sizes width lets you choose how wide to make notifications.
To change where Desktop notifications appear on your screen click the button that appears on the portion of your screen where you want them with the outline being your window under the basic settings tab. To change duration of desktop notifications there is up and down to add or reduce the number of seconds to show notifications for the default is 10 seconds. The sizes width lets you choose how wide to make notifications. The spacing field changes how far to place the notification from each other.
To search for which file extenstion you want to change to open in another program you can search in the top box for that file format. On the left is really long list of all mimetype that you can change but searching for a particular one will be much faster. Once you find the filetype you want to change on the top right it tells you what kind of file that mimetype is and shows the extensions. The current default is shown on the lower right with a change button that brings up a menu for you to change it to something else.
To search for which file extenstion you want to change to open in another program you can search in the top box for that file format. On the left is really long list of all mimetype that you can change but searching for a particular one will be much faster. Once you find the filetype you want to change on the top right it tells you what kind of file that mimetype is and shows the extensions. The current default is shown on the lower right with a change button that brings up a menu for you to change it to something else.
To reset your changes press the reset button if you don't want to keep your buttons.
Discover allows you to install and remove programs and utilities. It has a simplistic interface making it easy to navigate and use.
Discover allows you to install and remove programs and utilities. It has a simplistic interface making it easy to navigate and use. Discover however only shows GUI application packages so if you are looking for GUI command line packages please use muon instead.
Usage
Usage
------
------
Discover allows you to search for applications by using the search box. Clicking on a program will give you a description of it. When installing or removing software, you will be prompted for your password. You can also browse through different categories on the left clicking on the different categories.i To move back from a category or search press the back button which functions similar to the back button in a web browser.
Discover allows you to search for applications by using the search box. Clicking on a program will give you a description of it. When installing or removing software, you will be prompted for your password. You can also browse through different categories on the left clicking on the different categories. To move back from a category or search press the back button which functions similar to the back button in a web browser. In the results after selecting your program you are looking at you can select a screenshot and get a bigger view of the screenshot click on the screenshot.
To search for programs in discover type in the search bar in the upper left or press :kbd:`Control + F`.
Discover allows you to update software using the Updates tab located on the bottom of the left column. You can click the button to "check for updates" manually.
Discover allows you to update software using the Updates tab located on the bottom of the left column. You can click the button to "check for updates" manually.
@ -12,6 +14,8 @@ To remove software use the Installed tab. You can browse your installed packages
In the upper right corner of discover you can have a Sort category to sort your search results by name, rating, size, and release date.
In the upper right corner of discover you can have a Sort category to sort your search results by name, rating, size, and release date.
@ -9,7 +9,11 @@ To update your packages press the gear button with a clockwise pointed arrow. If
To search for a program to install type into the bar at the top that says search. If you find something you want to install you can right click and then mark for installation. When the package you want to install has additional dependencies will show up if you think twice about wanting to install you can click the cancel button to not pull in all those dependeices or press ok to continue looking for software to install. To apply your changes you can press the green checkbox button that says apply changes and you will end up entering your password to confirm you want to install and then the package will be installed.
To search for a program to install type into the bar at the top that says search. If you find something you want to install you can right click and then mark for installation. When the package you want to install has additional dependencies will show up if you think twice about wanting to install you can click the cancel button to not pull in all those dependeices or press ok to continue looking for software to install. To apply your changes you can press the green checkbox button that says apply changes and you will end up entering your password to confirm you want to install and then the package will be installed.
If you want to see your history of package updates and installed from the menu -> view -> history or press control + h.
When you find your package you want to install on the bottom half of the screen there is a bar of tabs. The detail tab has a description of the package you are currently selected. The Technical Details will show you where the package comes from what category it is and what the installed size would be and what size it takes to download the package. The depenedncies tab shows you what other packages are needed by the package you wish to install.
If you want to see your history of package updates and installed from the :menuselection:`menu --> view --> history` or press :kbd:`control + h`.
To check for updates in muon press :kbd:`Control + R` or the gear button with an arrow or :menuselection:`Edit --> Check for Updates`.
@ -5,7 +5,7 @@ LXQt Panel is the bar situated at the bottom of your screen by default. The pane
Usage
Usage
------
------
The application menu allows you to browse and search through available programs; a keyboard shortcut is conveniently available for this. The desktop switcher allows you to switch to another virtual desktop, allowing you to keep your workspace organized. The quick launch bar allows you to conveniently launch your file explorer (PCManFM) and web browser (Firefox). To add a program to quick launch open the menu and find it there and drag it down onto the panel.
The application menu allows you to browse and search through available programs; a keyboard shortcut is conveniently available for this and is set to :kbd:`Alt +F1` by default. The desktop switcher allows you to switch to another virtual desktop, allowing you to keep your workspace organized. The quick launch bar allows you to conveniently launch your file explorer (PCManFM) and web browser (Firefox). To add a program to quick launch open the menu and find it there and drag it down onto the panel.
..image:: menu_search.png
..image:: menu_search.png
@ -14,7 +14,7 @@ The taskbar lists the windows you currently have open. To bring one of these win
..image:: multiple_tasks.png
..image:: multiple_tasks.png
In the system tray there there are multiple widgets. With the volume applet you can change the volume by using the mouse-wheel with the mouse over the speaker icon left click the speaker icon and drag the volume up and down and toggle mute with the button at the bottom. To the far right is a clock, you can click the clock to bring up a pop up calendar window.
In the system tray there there are multiple widgets. With the volume applet you can change the volume by using the mouse-wheel with the mouse over the speaker icon left click the speaker icon and drag the volume up and down and toggle mute with the button at the bottom or middle click on the volume applet. To the far right is a clock, you can click the clock to bring up a pop up calendar window.
..image:: system_tray.png
..image:: system_tray.png
@ -30,7 +30,15 @@ To change to a custom font color press the color button checkbox. Press the drop
The checkbox for override icon theme lets you choose a non system default icon theme for lxqt-panel. The dropdown then lets you see what that icon theme from the dropdown list. If you do not like your changes to the system you can press the reset button to reset changing to before trying to customize the panel.
The checkbox for override icon theme lets you choose a non system default icon theme for lxqt-panel. The dropdown then lets you see what that icon theme from the dropdown list. If you do not like your changes to the system you can press the reset button to reset changing to before trying to customize the panel.
To add a new widget click on the widget on the panel configuration screen and press the + button and select the widget you want to add some of which are not on the panel by default. To move an applet down on the order of presentation press the down arrow while the up arrow moves the applet up on the order of presentation. To remove an applet you do not want you can press the - button.
To add a new widget click on the widget on the panel configuration screen and press the + button and select the widget you want to add some of which are not on the panel by default. To move an applet down on the order of presentation press the down arrow while the up arrow moves the applet up on the order of presentation. To remove an applet you do not want you can press the - button. The wrench button has the settings for certain but not all of the applets in the panel for example the application menu and task manager are customizeable but quick launch and show desktop do not.
To configure options for your application menu right click on the menu configure application menu or from the panel configuration dialog with the widget selected for application menu click on the wrench button. The checkbox for icon lets you choose a custom icon to use in your menu if you want one and then the use the folder button to browse for the path of the custom file you want for your menu. The checkbox for menu text lets you add text that can be anything you want to your menu. To change the shortcut to open the menu from the default :kbd:`Alt + f1` you can press the button for keyboard shortcut and a countdown will begin a countdown and press the button.
To change options for your task manager or taskbar open the panel configuration dialog select taskmanager taskbar and click the wrench button. The checkbox for show only windows from desktop will only show windows from a certain desktop and will have a drop down that will default to the current desktop but can also be shown. If you want to close windows on a middle click there is a checkbox to turn that on and off. The window grouping button will group multiple windows of the same program into a group of windows. The checkbox for show popup on mouse hover will allow you to hover the mouse over the window group to show them off. Turning the checkbox for window grouping will show each window as its own item on the taskbar.
To change the look of your taskbar in the same window as above the appearance section the button style will change whetehre to show only the icon or the icon only for only the icons. To show window and the text label of the program press text and icon. Icons only will work best with a panel aligned to the left or right. To have only the text and no icons slecet only text. To change the maximum width of a button change the maximum button width which is measured in pixels to how wide on maximum a button could be.
To change the settings on your clock right click on the clock and then configure world clock. The format drop down menu allows you to change how the clock shows. To sleect a short format allows you to have a preselected short format which shows a 12 hour format and am just telling you what time it is. Selecting long from the menu will show you the time with seconds and the time zone. To have a customizeale clock message select custom and then checkboxes to show seconds, pad the hours with zeros or to use a 12 hour format. The time zone checkbox will show your your time zone. The position of says where to put the time zone on the clock.
@ -7,7 +7,7 @@ Runner allows you to search for and launch applications and commands in the LXQt
Usage
Usage
------
------
To search for a program, press Alt + F2 and start typing a command. The search results will show below, similar to address bar behavior in browsers. All installed applications can be launched this way and lxqt-runner can configured to store a history of recent programs.
To search for a program, press :kbd:`Alt + F2` and start typing a command. The search results will show below, similar to address bar behavior in browsers. All installed applications can be launched this way and lxqt-runner can configured to store a history of recent programs.
Configuration
Configuration
@ -26,7 +26,7 @@ Screenshot
How to launch
How to launch
-------------
-------------
Runner should be running in the background and Alt + F2 should. If you need to manually start it for some reason run
Runner should be running in the background and :kbd:`Alt + F2` should bring it forward to launch an application. If you need to manually start it for some reason run
In the top-right corner of a windows a few commands allow you basic controls of the window. Starting from left to right
In the top-right corner of a windows a few commands allow you basic controls of the window. Starting from left to right
- Iconify (-) hides/minimizes the window making it only appear on the task bar of the Panel. It can be recalled by clicking on the application on the task bar, or cycling through open windows with (ALT + Tab)
- Iconify (-) hides/minimizes the window making it only appear on the task bar of the Panel. It can be recalled by clicking on the application on the task bar, or cycling through open windows with :kbd:`ALT + Tab`
- Maximize reshapes the window to fix the entire screen.
- Maximize reshapes the window to fix the entire screen.
- Close (x) attempts to end the window and probably the program.
- Close (x) attempts to end the window and probably the program.
@ -27,9 +27,10 @@ Right clicking on the title bar and left clicking on the icon located at the top
Useful keyboard shortcuts
Useful keyboard shortcuts
-------------------------
-------------------------
- Closing a window (Alt + F4)
- Closing a window :kbd:`Alt + F4`
- Switching through windows (Hold Alt + hit Tab)
- Switching through windows :kbd:`Hold Alt + hit Tab`
- Resizing windows, Super (windows key) + directional arrows.
Lubuntu 18.10 allows you to move through the menus of with only the keyboard instead of having to use the mouse. Looking at the menus there is an underlined with a letter. To open that menu with a for example ofter the file menu can be opened with :kbd:`Alt + F`. One other thing to notice is that with :kbd:`Alt + underlined character`.
Once you have the menu opened you can use the up and down arrow keys to move up and down in a menu. If the menu has :menuselection:`-->` to the right you can press :kbd:`Right arrow` to expand into a submenu.
If you run a hypervisor on your system putting a different mouse cursor for both the host and the guest can let you tell them apart. If you want to install many more colors you can search the repositories for cursor or if you just want many different colors install the oxygen-cursor-theme-extra package.
If you run a hypervisor on your system putting a different mouse cursor for both the host and the guest can let you tell them apart. If you want to install many more colors you can search the repositories for cursor or if you just want many different colors install the oxygen-cursor-theme-extra package.
If you select text on X11 you can do what is middle click paste the selected text with the middle mouse button by clicking down on the scroll wheel.
apt-ghetto
6 years ago
committed by
GitHub
