@ -20,7 +20,7 @@ You can see your disk usage for each partition graphically with the bars at the
On the side pane to the left you can switch between each different drive on the left with the name of each device. Another way to switch which device you are managing partitions on use :menuselection:`Device --> Select Current Device`.
On the side pane to the left you can switch between each different drive on the left with the name of each device. Another way to switch which device you are managing partitions on use :menuselection:`Device --> Select Current Device`.
To delete a partition left click on a partition to select it press :kbd:`Delete`, :menuselection:`Partition --> Delete`, or right click and select :menuselection:`Delete`. To add a new partition in unallocated space right click on the To view statistical information on a partition select the partition :menuselection:`Partition --> Properties` or right click on that partition :menuselection:`Properites`. To resize or move a partition press :kbd:`Control+R`, :menuselection:`Partition --> Resize/Move`, or right click on the partition and select :menuselection:`Resize/Move`. On the bottom of the window a list of :guilabel:`Pending Operations` to be applied to your drives. If you want to delete a partition on a hard drive and overwrite the data on that partition :menuselection:`Partition --> Shred` or :kbd:`Shift+Delete`. However shredding solid state drives is not recommended as it may not fully scrub the data and may marginally wear out your drive.
To delete a partition left click on a partition to select it press :kbd:`Delete`, :menuselection:`Partition --> Delete`, or right click and select :menuselection:`Delete`. To add a new partition in unallocated space right click on the To view statistical information on a partition select the partition :menuselection:`Partition --> Properties` or right click on that partition :menuselection:`Properties`. To resize or move a partition press :kbd:`Control+R`, :menuselection:`Partition --> Resize/Move`, or right click on the partition and select :menuselection:`Resize/Move`. On the bottom of the window a list of :guilabel:`Pending Operations` to be applied to your drives. If you want to delete a partition on a hard drive and overwrite the data on that partition :menuselection:`Partition --> Shred` or :kbd:`Shift+Delete`. However shredding solid state drives is not recommended as it may not fully scrub the data and may marginally wear out your drive.
To change your partitions you will need to apply your changes later press the :guilabel:`Apply` button or :menuselection:`Edit --> Apply`. After pressing Apply a dialog will come up asking you to confirm and check this is what you want to do and then press :guilabel:`Apply Pending Operations` to apply these changes. To go back from this point press the :guilabel:`Cancel` button. To undo your your changes to your partitions press :kbd:`Control+Z`, the :guilabel:`Undo` button, or :menuselection:`Edit --> Undo`. To clear your operations that have yet to been applied :menuselection:`Edit --> Clear`.
To change your partitions you will need to apply your changes later press the :guilabel:`Apply` button or :menuselection:`Edit --> Apply`. After pressing Apply a dialog will come up asking you to confirm and check this is what you want to do and then press :guilabel:`Apply Pending Operations` to apply these changes. To go back from this point press the :guilabel:`Cancel` button. To undo your your changes to your partitions press :kbd:`Control+Z`, the :guilabel:`Undo` button, or :menuselection:`Edit --> Undo`. To clear your operations that have yet to been applied :menuselection:`Edit --> Clear`.
@ -28,13 +28,13 @@ If you have say a new solid state drive that is not formatted you first need to
To change a mount point of a drive internally for your machine to have it start mounted access to it always :menuselection:`Partition --> Edit Mount Point` or :menuselection:`Edit Mount Point`. This will popup a new window to choose the path where to mount this partition enter it in the :guilabel:`Path` field. Below there are many :guilabel:`Options` for how to mount things. To actually cause this to be mounted press the :guilabel:`OK` button. To cancel mounting this partition press the :guilabel:`Cancel` button. Once this happens you will get a dialog asking if you really want to do this as it changes the file in etc/fstab. To really go through with changing this press the :guilabel:`Save changes` button. To not save these changes press the :guilabel:`Cancel` button. After you have done this you can right click on this drive and select :guilabel:`Mount` to mount it immediately. Once saved in /etc/fstab your drive will be saved and mounted at this point every time. However if you want to edit a mount point you will need to unmount the partition first and you can do this from right clicking and selecting :guilabel:`Unmount`.
To change a mount point of a drive internally for your machine to have it start mounted access to it always :menuselection:`Partition --> Edit Mount Point` or :menuselection:`Edit Mount Point`. This will popup a new window to choose the path where to mount this partition enter it in the :guilabel:`Path` field. Below there are many :guilabel:`Options` for how to mount things. To actually cause this to be mounted press the :guilabel:`OK` button. To cancel mounting this partition press the :guilabel:`Cancel` button. Once this happens you will get a dialog asking if you really want to do this as it changes the file in etc/fstab. To really go through with changing this press the :guilabel:`Save changes` button. To not save these changes press the :guilabel:`Cancel` button. After you have done this you can right click on this drive and select :guilabel:`Mount` to mount it immediately. Once saved in /etc/fstab your drive will be saved and mounted at this point every time. However if you want to edit a mount point you will need to unmount the partition first and you can do this from right clicking and selecting :guilabel:`Unmount`.
To view information of a partition on your drive double click on it. On the top a bar code on the top shows how full the parition is. To see what kind of file system it is in the :guilabel:`File system` field. To see a label on your filesystem look at the :guilabel:`Label` field. To see where that partition is mounted is in the :guilabel:`Mount point` field. To see what partition type you use in the :guilabel:`Partition type` field. To see the size of the parition is in the :guilabel:`Size` field. To see the available size read the :guilabel:`Avialalbe` field. To see how much is used of your partition see the :guilabel:`Used` label.
To view information of a partition on your drive double click on it. On the top a bar code on the top shows how full the partition is. To see what kind of file system it is in the :guilabel:`File system` field. To see a label on your filesystem look at the :guilabel:`Label` field. To see where that partition is mounted is in the :guilabel:`Mount point` field. To see what partition type you use in the :guilabel:`Partition type` field. To see the size of the partition is in the :guilabel:`Size` field. To see the available size read the :guilabel:`Avialalbe` field. To see how much is used of your partition see the :guilabel:`Used` label.
..image:: kde-partition-partionstats.png
..image:: kde-partition-partionstats.png
If you have multiple drives on your system :menuselection:`Device --> Select Current Device --> Desired Disk`. To view information on the current drive such as what type of partition table or Logical size and smart status :menuselection:`Device --> Properties`. If you do not really see all your devices or current status press :kbd:`F5` or :menuselection:`Tools --> Refresh Devices`.
If you have multiple drives on your system :menuselection:`Device --> Select Current Device --> Desired Disk`. To view information on the current drive such as what type of partition table or Logical size and smart status :menuselection:`Device --> Properties`. If you do not really see all your devices or current status press :kbd:`F5` or :menuselection:`Tools --> Refresh Devices`.
If you want to quit KDE Partition manager press :kbd:`Control+Q`.
If you want to quit KDE Partition Manager press :kbd:`Control+Q`.
Screenshot
Screenshot
-----------
-----------
@ -56,7 +56,7 @@ from the command line. The icon for KDE Partition Manager is a red hard drive.
Customizing
Customizing
-----------
-----------
To toggle showing a statusbar that shows pending operations check/uncheck the :menuselection:`Settings --> Show Statusbar` checkbox in the menu. To toggle showing your devices side pane check/uncheck the :menuselection:`Settings --> Panels Shown --> Devices`. To toggle showing information about the currently selected partition check/uncheck the :menuselection:`Settings --> Panels Shown --> Infromation` checkbox in the menu. To toggle showing log output of check/uncheck the :menuselection:`Settings --> Panels Show --> Log Output` checkbox.
To toggle showing a statusbar that shows pending operations check/uncheck the :menuselection:`Settings --> Show Statusbar` checkbox in the menu. To toggle showing your devices side pane check/uncheck the :menuselection:`Settings --> Panels Shown --> Devices`. To toggle showing information about the currently selected partition check/uncheck the :menuselection:`Settings --> Panels Shown --> Information` checkbox in the menu. To toggle showing log output of check/uncheck the :menuselection:`Settings --> Panels Show --> Log Output` checkbox.
To customize settings for KDE Partition Manager press :kbd:`Control+Shift+,` or :menuselection:`Settings --> Configure KDE Partition Manager`. The :guilabel:`General` tab has settings for aligning partitions and defaults for partitions. To change where your sectors on your disc align to use the :guilabel:`Sector alignment` field. To change which messages to log you can change with :guilabel:`Hide messages below` to hide lower level messages to be logged. To choose your default file system use the :guilabel:`Default file system` drop down menu. To change whether to overwrite shredded data with zeros or random data use the buttons to the right of :guilabel:`Overwrite with` group of buttons.
To customize settings for KDE Partition Manager press :kbd:`Control+Shift+,` or :menuselection:`Settings --> Configure KDE Partition Manager`. The :guilabel:`General` tab has settings for aligning partitions and defaults for partitions. To change where your sectors on your disc align to use the :guilabel:`Sector alignment` field. To change which messages to log you can change with :guilabel:`Hide messages below` to hide lower level messages to be logged. To choose your default file system use the :guilabel:`Default file system` drop down menu. To change whether to overwrite shredded data with zeros or random data use the buttons to the right of :guilabel:`Overwrite with` group of buttons.
