Fix merging and finish release for 25.04

README.md

@@ -9,7 +9,7 @@ The documentation is powered by [Sphinx](http://www.sphinx-doc.org/en/stable/) a
 Run the following command to install the needed dependencies:
 
 ```bash
-sudo apt install python3-pip python3-sphinx latexmk texlive texlive-formats-extra python3-sphinx-rtd-theme python3-sphinx-bootstrap-theme
+sudo apt install python3-sphinx latexmk texlive texlive-formats-extra python3-sphinx-rtd-theme python3-sphinx-bootstrap-theme
 ```
 
 You can see the options for building the documentation by running `make help`. You can make the html version by running `make html`. You can make a pdf version of the lubuntu manual with `make latexpdf`. If you just want to check for warnings or errors building run `make dummy`.

source/1/1.1/retrieving_the_image.rst

@@ -2,7 +2,7 @@ Chapter 1.1 Retrieving the image
 =================================
 
 
-Before you install Lubuntu, you need to retrieve the correct image. Lubuntu supports AMD64 CPU types also known as 64-bit with a new version every six months (supported for nine months), and every two years being a long term support release (supported for three years). Lubuntu 24.04 is a Long Term Support release supported until 2027. Lubuntu 24.10 is supported until July 2025.
+Before you install Lubuntu, you need to retrieve the correct image. Lubuntu supports AMD64 CPU types also known as 64-bit with a new version every six months (supported for nine months), and every two years being a long term support release (supported for three years). Lubuntu 24.04 is a Long Term Support release supported until 2027. Lubuntu 25.04 is supported until January  2026.
 
 
 LTS vs. Regular Releases
@@ -14,7 +14,7 @@ For users looking to try new features every six months at the expense of the sup
 
 **It is extremely important that if you choose this path, you upgrade to each successive regular release shortly after it comes out.** If you are not comfortable doing this, you should consider using the LTS release instead.
 
-About four months after a new LTS release comes and every 6 months thereafter an **LTS Point Release** is realeased to support new hardware and fewer updates to download with the longer support term of an LTS realease. LTS point releases are released every August and Feburary. Each LTS point release is called 24.04.1 is the first point release for the 24.04 point release.
+About four months after a new LTS release comes and every 6 months thereafter an **LTS Point Release** is released to support new hardware and fewer updates to download with the longer support term of an LTS release. LTS point releases are released every August and February. Each LTS point release is called 24.04.1 is the first point release for the 24.04 point release.
 
 Ways to download the image
 ---------------------------
@@ -44,7 +44,8 @@ To verify the image, run this from the command line:
 .. code:: 
 
 
- sha256sum lubuntu-24.10-desktop-amd64.iso
+ sha256sum lubuntu-25.04-desktop-amd64.iso
+
 
 
 and then carefully check that the output matches 
@@ -52,7 +53,7 @@ and then carefully check that the output matches
 .. code::
 
 
-  5c9c3f03ea12566ecec008aef97afa997854674a1a0421d400cf48d819fd953c *lubuntu-24.10-desktop-amd64.iso
+  da49827ab8bce6b78214d6fd44c4334a5194e5c87534906e4f272492de4fd14e *lubuntu-25.04-desktop-amd64.iso
 
 
 Downloading the image via BitTorrent
@@ -89,7 +90,7 @@ To download the image using zsync run
 .. code::
 
 
-   zsync https://cdimage.ubuntu.com/lubuntu/releases/oracular/release/lubuntu-24.10-desktop-amd64.iso.zsync
+   zsync https://cdimage.ubuntu.com/lubuntu/releases/25.04/release/lubuntu-25.04-desktop-amd64.iso.zsync
 
    
 **You have now downloaded the image successfully. Please continue to Chapter 1.2.**

source/1/1.3/installation.rst

@@ -9,11 +9,11 @@ At the start of the boot process, a GRUB splash screen will be shown. To install
 
 .. image::  grubsplash.png
 
-The next screen will present a choice between :guilabel:`Try Lubuntu`, which will give you a live session to run Lubuntu as you see fit, or run the installer directly with :guilabel:`Install Lubuntu`. Above this there is a field to select which language you want to install in the :guilabel:`Select Your Language` drop down. To get this screen in your language, select one then press the :guilabel:`Confirm` button. If you need more advanced network settings to install Lubuntu than just connecting to Wi-Fi use the :guilabel:`Try Lubuntu` choice. If choose :guilabel:`Install Lubuntu` the installer will start right away and install in your language. At the bottom of your screen if you are connected to the internet automatically like with an ethernet cable it will say :guilabel:`Connected` at the bottom. If you are not connected to the internet at the bottom it will say :guilabel:`Not Connected`.
+The next screen will present a choice between :guilabel:`Try Lubuntu`, which will give you a live session to run Lubuntu as you see fit, or run the installer directly with :guilabel:`Install Lubuntu`. Above this there is a field to select which language you want to install in the :guilabel:`Select Your Language` drop down. To get this screen in your language, select one then press the :guilabel:`Confirm` button. If you need more advanced network settings to install Lubuntu than just connecting to Wi-Fi use the :guilabel:`Try Lubuntu` choice. If choose :guilabel:`Install Lubuntu` the installer will start right away and install in your language. At the bottom of your screen if you are connected to the internet automatically like with an Ethernet cable it will say :guilabel:`Connected` at the bottom. If you are not connected to the internet at the bottom it will say :guilabel:`Not Connected`.
 
 .. image:: installer-prompt.png
 
-Once you have booted into the live session, feel free to explore Lubuntu and make sure all your hardware works. Once you are ready to install Lubuntu, double click the icon in the top-left corner of the desktop :guilabel:`Install Lubuntu 24.10` or :menuselection:`System Tools --> Install Lubuntu 24.10`.
+Once you have booted into the live session, feel free to explore Lubuntu and make sure all your hardware works. Once you are ready to install Lubuntu, double click the icon in the top-left corner of the desktop :guilabel:`Install Lubuntu 25.04` or :menuselection:`System Tools --> Install Lubuntu 25.04`.
 
 .. image:: live_session.png
 
@@ -42,7 +42,7 @@ Customize
 
 Next will bring a choice of what applications to install, additional third party drivers, or to install updates with the installation. To choose to install all applications and the list of the third party applications choose :guilabel:`Full Installation`. To choose the normal applications included in Lubuntu select the :guilabel:`Normal Installation` button. To choose a minimal installation of just the desktop environment select the :guilabel:`Minimal Installation` button. To install updates while installing check the :guilabel:`Download and install updates following installation` checkbox. To install third party and maybe proprietary drivers check the :guilabel:`Install third-party software for graphics, WiFi hardware, and additional media formats` checkbox.
 
-Pick which particular additional applications you wish to install there are checkboxes for each program under :guilabel:`Install additional third party packages`. To install Element for encrypted Matrix chat check the :guilabel:`Element` checkbox. To install the Thunderbird email and calendering client check the :guilabel:`Thunderbird checkbox`. To install virt-manager to manage running virtual machines on Lubuntu check the :guilabel:`Virtual Machine Manager` checkbox. To make digital art check the checkbox for :guilabel:`Krita`.
+Pick which particular additional applications you wish to install there are checkboxes for each program under :guilabel:`Install additional third party packages`. To install Element for encrypted Matrix chat check the :guilabel:`Element` checkbox. To install the Thunderbird email and calendering client check the :guilabel:`Thunderbird checkbox`.
 
 To go to the next part of installation press the :guilabel:`Next` button. To go to selecting your keyboard again press the :guilabel:`Back` button.
 
@@ -71,7 +71,7 @@ To move back to Selecting your keyboard layout press the :guilabel:`Back` button
 
 User Setup
 ----------
-The user setup section creates a user profile, consisting of typing your name into the :guilabel:`What is your name?` field. Next type your username in the :guilabel:`What name do you want to use to log in?`. Put what you want your hostname of your computer to be in the :guilabel:`what is the name of this computer?` field. The last thing you need to enter is your password in the :guilabel:`Choose a password to keep your account safe`.  Enter your password twice to make sure you have not mistyped it. If a name can actually be used as a username or hostname a green checkmark will appear to the right of it if you cannot a red x will appear. Pressing the :guilabel:`Next` button will give you a summary screen, showing you the settings before the install begins. Once you have checked the summary click the :guilabel:`Install` button to begin the installation. 
+The user setup section creates a user profile, consisting of typing your name into the :guilabel:`What is your name?` field. Next type your username in the :guilabel:`What name do you want to use to log in?`. Put what you want your hostname of your computer to be in the :guilabel:`what is the name of this computer?` field. The last thing you need to enter is your password in the :guilabel:`Choose a password to keep your account safe`. Enter your password twice to make sure you have not mistyped it. To the right of your password will have an x if your passwords don't match. If you have a weak password to the right will have an orange triangle saying why your password is weak. Passwords less than 8 characters, containing a sequence like 1234, or based off a simple dictionary word like testing1 are considered weak. If a name can actually be used as a username or hostname a green checkmark will appear to the right of it if you cannot a red x will appear. Pressing the :guilabel:`Next` button will give you a summary screen, showing you the settings before the install begins. Once you have checked the summary click the :guilabel:`Install` button to begin the installation. 
 
 .. image::  user_setup.png
 
@@ -151,7 +151,7 @@ Then a summary screen shows what settings are for your users. To actually begin
 Oem User Setup
 --------------
 
-To setup your user setup for an OEM preinstalled system :menuselection:`System Tools ---> Finish OEM prepartion`. Then you will be asked if you want to finish OEM setup and then a wizard will be run next boot. Then press :guilabel:`Yes` to confirm this. Then you will need to reboot to run the user setup.
+To setup your user setup for an OEM preinstalled system :menuselection:`System Tools --> Finish OEM preparation`. Then you will be asked if you want to finish OEM setup and then a wizard will be run next boot. Then press :guilabel:`Yes` to confirm this. Then you will need to reboot to run the user setup.
 
 The first section of user setup will ask you what language to continue in at the very bottom. To go to the next part of Lubuntu setup press the :guilabel:`Next` button.
 

source/2/2.1/2.1.1/firefox.rst

@@ -121,7 +121,7 @@ To change how Firefox deals with websites wanting permissions for Location, Came
 
 Version
 ----------
-Lubuntu currently ships with the latest version of Firefox, Firefox 129.
+Lubuntu currently ships with the latest version of Firefox, Firefox 134.
 
 
 How to Launch

source/2/2.1/2.1.3/Quassel_IRC.rst

@@ -1,114 +0,0 @@
-Chapter 2.1.3 Quassel IRC
-=========================
-
-Quassel IRC is Lubuntu's default modern, cross-platform, distributed chat client. Quassel aims to bring a pleasurable, comfortable chatting experience to all major platforms (including Linux®, Windows®, and MacOS® as well as Android smartphones), making communication with your peers not only convenient, but also ubiquitously available. 
-
-Features:
- - Remember Channels, Servers, and queries
- - SASL authentication
- - Notifications, including sounds
- - Aliases
- - Ignore lists
-
-Usage
-------
-To chat on IRC you need to connect to a server and join a channel. This can be done with the join button or by typing "/join [channel]". To send a query or private message directly to someone type "/query" username or right click on the user list and select :menuselection:`Start Query`. After starting a query you can get back to this conversation by viewing the user with a human shaped icon on the left side pane to continue the conversation later. If you wish to view older messages just scroll up with the mousewheel or the scrollbar to the right. Scroll down to view newer messages.
-
-To see all the nicknames of someone in a channel are located in a sidebar labeled :guilabel:`Nicks`. The lists of all channels you are in is labeled :guilabel:`All chats`. To switch between different channels left click on the channel name.
-
-.. image:: quasselwizard.png
-
-To add the Lubuntu IRC chat network click :menuselection:`File --> Networks --> Configure_Networks`. To add a new network click the :guilabel:`+Add` button. To connect to a common public network :guilabel:`Use preset` dropdown, select :guilabel:`irc.libera.chat:6667`, :guilabel:`irc.libera.chat:6697` for encrypted irc, or any other server you want to join and then press :guilabel:`OK`. To change a name of an IRC network press the :guilabel:`Rename` button type the new name in and press :guilabel:`OK`.
-
-To join a channel simple type :kbd:`/join 1` (where 1 is the channel name), right click the network and select :menuselection:`Join Channel` or use the :guilabel:`Join` button. To join support channel for lubuntu type :kbd:`/join #lubuntu`. To leave a channel right click on the channel name on the right hand side and select :menuselection:`Part` from the context menu or type :kbd:`/part channelname`. If you want to join the channel again after leaving it right click on the channel and select :menuselection:`Join`. To have your chat be hidden until you rejoin it again right click on the channel and select :menuselection:`Hide Chats(s) Temporarily`. To hide the chat forever right click on the channel and select :menuselection:`Hide Chats(s) Permanently`.
-
-To hide all people joining or leaving a chat right click on the channel list :menuselection:`Hide Events --> Joins/Parts/Quits`. To only hide people joining right click on the list of channel list :menuselection:`Hide Events --> Joins`. To hide people parting the channel right click on the channel list :menuselection:`Hide Events --> Parts`. To hide people quitting the channel right click on the channel list :menuselection:`Hide Events --> Quits`. To hide people changing their nickname :menuselection:`Hide Events --> Name Changes`. To hide when someone changes the topic of a channel :menuselection:`Hide Events --> Topic Changes`. To hide people changing the mode of a channel right click on the list of channels :menuselection:`Hide Events --> Mode Changes`. To hide when Quassel tells you it is tomorrow right click on the list of channels :menuselection:`Events --> Day Changes`. However while hiding events may result in less busy traffic it can leave you trying to communicate with people no longer on IRC. To view these events again simply uncheck the checkbox for that event.
-
-.. image:: channel-list-context.png
-
-If you want to disconnect from a particular server if you have connected to it right click on the server name and select :menuselection:`Disconnect`. If you are disconnected from a server and want to connect to it right click on it and select :menuselection:`Connect`. To collapse a servers list of channels you can left click on the arrow next to the server name and click it again to uncollapse the list of channels. To change your settings for a server right click on a server name and select :menuselection:`Configure`.
-
-To toggle showing checkboxes in front of each chat right click on a server or channel and check the checkbox for :menuselection:`Show/Hide Chats` to bring a giant list of checkboxes. To hide a chat this way uncheck the checkbox in front of that channel or query. To go back and actually hide some chats right click on the channel or server and unchceck :menuselection:`Show/Hide Chats`.
-
-To state you are taking an action in IRC you can type :kbd:`/me` at the start of you typing to have say \*nick does something. To change your nickname on IRC type :kbd:`/nick newname` to change you name to newname.
-
-To leave all servers and disconnect press the :guilabel:`Disconnect` button in the top toolbar. If you have multiple servers configured to disconnect from one press the downward pointed arrow and select the server you want to disconnect from. To connect to the servers again press the :guilabel:`Connect` button. To connect to a specific server press the downward pointing arrow and select the server you want to connect to.
-
-To switch between multiple channels left click on the channels on the left hand side. If a different channel has has new text in it the channel name will appear in blue. If a channel has a green name a user has joined of left. You also can switch between multiple channels with :kbd:`Alt + up arrow` to move up or :kbd:`Alt + Down arrow` to move down. To go to the next active chat press :kbd:`Alt + Right` or to go to the previous active chat :kbd:`Alt + Left`. To jump to a hot chat press :kbd:`Meta +A`.
-
-In Quassel if someone says your name you are said to be highlighted which in Quassel will make a sound and in a goldenrod color over the line of text with your name on it. The notification will also be shown on your desktop if you are in another window. Also at midnight Quassel will tell you when midnight and the date of the new day.
-
-If you want to enable automatically spell checking your input right click on the input bar and select :menuselection:`Auto Spell Check`. To change your language for spellcheck right click in the input bar and select :menuselection:`Spell Checking language`. If you make a mistake when typing in your input you can press :kbd:`Control+Z` or right click on the input bar and select :menuselection:`Undo`. To redo typing and action press :kbd:`Control+Shift+Z` or :menuselection:`Redo`. To clear the text you input right click the input bar and select :menuselection:`Clear`.
-
-To zoom in to get to your chat more right click and select :menuselection:`Zoom In`. To zoom out in Quassel press :kbd:`Control+-` or right click and select :menuselection:`Zoom Out`. To go back to your original size right click Quassel and select :menuselection:`Actual Size`.
-
-To use SASL authentication to autologin to an account no matter which nickname you want to use :menuselection:`File --> Networks --> Configure networks` to bring up a network configuration dialog. Click on the autoidentify tab and press the checkbox for :guilabel:`Use SASL Authentication`. Enter your username on the IRC network in the :guilabel:`Account` text field. Input your password into the :guilabel:`Password` field so that you know how to auto identify. You can also autoidentify without  using SASL by clicking the Top checkbox. Nickserv is a sensible default for what the services is but it may be different on different servers and put your password in where you autoidentify.
-
-If you want to have settings for automatic reconnecting :menuselection:`File --> Network --> Configure network` and select the :guilabel:`Connection` tab. The checkbox  :guilabel:`Automatic Reconnect` will automatically rejoin chats if you get disconnected. The :guilabel:`Wait` field shows how long to between the retries between each try. The checkbox for :guilabel:`Rejoin all channels after reconnect` lets you rejoin all of your channels without having to manual rejoin each. The :guilabel:`Number of retries` is how many times to retry to connect before stopping. To have an unlimited number of retries click the :guilabel:`Unlimited` number of checkboxes.
-
-.. image:: quassel_irc.png
-
-To ignore a really annoying user you can on the nicks bar on the right hand side right click on the user :menuselection:`Ignore` and then select how to ignore that user. If you realize you want to talk to them again Right click the same username and uncheck the checkbox for the ignore rule you created.
-
-To type a message to an entire channel type into the bar at the bottom and press enter. To complete typing someone's nickname press the :kbd:`Tab` key to complete their name. To paste text into the channel such as a link press :kbd:`Control + V` or right click :menuselection:`Paste`. If you see a hyperlink in chat you can left click on the link to open in your webbrowser or you can copy the link by right clicking on it and :menuselection:`Copy Link Address`.
-
-To close the list of nicknames or channels press the X button or :menuselection:`View --> Nicks`. To reopen the view of nicks :menuselection:`View --> Nicks`. To close the list of all chats press the X button to close a list of all channel and private messages you are in. To reopen it press the :menuselection:`View --> Chat lists --> All chats`.
-
-To make your chat full screen :menuselection:`View --> Full Screen Mode` or :kbd:`Control + Shift +F`. Press the keyboard shortcut or use the menu again to get out of fullscreen. If you want to quit Quassel press :kbd:`Control+Q` or right click on the system tray and select :menuselection:`Quit`.
-
-Customizing
------------
-To change your preferences for Quassel press :kbd:`F7` or :menuselection:`Settings --> Configure Quassel`. To change how Quassel appears use the :guilabel:`Interface` tab. To choose a language for your chat change the :guilabel:`Language` drop down menu. To change the client style for the widget of Quassel choose a widget style from the :guilabel:`Widget style` drop down menu.  To change which icon theme you use for Quassel use the :guilabel:`Fallback icon theme` drop down menu and to have it replace your system icon theme press the :guilabel:`Override system theme`.To toggle showing tray icon check/uncheck the :guilabel:`Show system tray icon` checkbox. If you want to be able to close the Quassel window and still have Quassel running in the system tray to bring it back up check the :guilabel:`Hide to tray on close button`.
-
-.. image:: quassel-pref-interface.png
-
-The :guilabel:`Chat View` tab has settings for colors timestamps and hyperlinks. To change how the time before each message appear check the :guilabel:`Custom timestamp format` checkbox and type hh for hours mm for both minutes or ss for seconds. To toggle showing brackets around everyone's nicknames check the :guilabel:`Show brackets around sender names`. To chose a custom chat window font press the :guilabel:`Custom chat window font` checkbox and then press the :guilabel:`Choose` button to choose a new font. To toggle previews of hyperlinks in chat check/uncheck the :guilabel:`Show previews of webpages on URL hover`. To toggle a red horizontal line when switch chats to show where you left off check/uncheck the :guilabel:`Set marker line automatically when switching chats`. To toggle a red horizontal line to show where left off when you switch windows check/uncheck the :guilabel:`Set marker line automatically when Quassel loses focus` checkbox.
-
-.. image:: quasselpref.png
-
-To change your colors of chat use the :guilabel:`Chat View Colors` tab. To toggle if you want colored text press/unpress the :guilabel:`Allow colored text` checkbox. To change the Colors of your user interface on Quassel check the :guilabel:`Custom Colors` checkbox. Then there are many buttons for each different kind of message which you can press the button that all bring up the specific color for that kind of message. To change the colors of nicknames for different people sending messages check the :guilabel:`Use Sender Coloring` checkbox.
-
-.. image:: chat-view-colors.png 
-
-The :guilabel:`Chat & Nick Lists` has settings for the lists of nickname lists. The :guilabel:`Custom font` checkbox lets you chose a custom font on the lists of nicks and the :guilabel:`Choose` button lets you choose the font you want. The :guilabel:`Display topic in tooltip` shows the channel topic in a tooltip if you move the mouse over it. If you want to be able to switch channels from the mouse wheel check the :guilabel:`Mouse wheel changes selected chat` checkbox. The checkbox :guilabel:`Use Custom Colors` enables the settings for different colors for the different channels. The buttons next to :guilabel:`Standard`, :guilabel:`Inactive`, :guilabel:`Highlight`, or :guilabel:`Other activity` all change what color the channel appears when you are in a list of channels. The :guilabel:`Custom Nick List colors` checkbox lets you change the color of nicks in the list. The :guilabel:`Online` button changes the color of nicks of online users. The :guilabel:`Away` button changes the color of nicks of Away users.  
-
-.. image:: quasel-chat-nick-list.png
-
-The :guilabel:`Input widget` has settings for what you tab to type into channels or private messages. The :guilabel:`Custom Font` checkbox has a thing to activate your own custom font for just input and press the :guilabel:`Choose` button to the font. To have per chat history check the :guilabel:`Enable per chat History` checkbox. The checkbox :guilabel:`Show nick selector` puts a widget in the lower left corner of the window to select different nicks. The checkbox :guilabel:`Show style buttons` shows buttons that style your text hidden in an arrow under an arrow. To enable line wrapping when you type a long line in the input box check the :guilabel:`Line Wrapping`  checkbox. To enable multiple line editing if you have a really long thing you want to type into the IRC channel check the :guilabel:`Multi-Line Editing` checkbox. To edit the largest number of lines shown change the :guilabel:`Show at most X lines` field. To have a scrollbar on inputting text if long enough check the :guilabel:`Enable scrollbars` checkbox. After tab completing someone's nick if you want something after it in the :guilabel:`Completion suffix` field. To add a space after tab completing someone's nick automatically check the :guilabel:`Add space after nick when completing mid-sentence` checkbox.
-
-.. image:: quassel-input-widget.png
-
-To change how Quassel displays the topic of each channel use the :guilabel:`Topic Widget` tab. To use a custom font for your topic check the :guilabel:`Custom font` checkbox and to choose a different font press the :guilabel:`Choose` button. To choose to resize to fit the topic check the :guilabel:`Resize dynamically to fit contents`. To only do this when you hove over the topic check the :guilabel:`On hover only` checkbox.
-
-To view settings for spellcheck use the :guilabel:`Spell Checking` tab. To change the default language for you spell check use the :guilabel:`Default language` drop down menu. To toggle autodetecting language check the :guilabel:`Enable autodetection of language` checkbox. To have Automatic check spelling by default check the :guilabel:`Automatic spell checking enabled by default` checkbox. To have spell check not spellcheck on words starting with capital letters check the :guilabel:`Skip all uppercase words` checkbox. To not spellcheck two words right next to each other check the :guilabel:`Skip run-together words` checkbox. To add words to be the dictionary type in the :guilabel:`Ignored Words` field and then press the :guilabel:`Add` button. To remove a word from your dictionary left click on it and press the :guilabel:`Remove` button.
-
-.. image:: quassel-spellcheck.png 
-
-To have additional settings on highlights like when someone says your name in a channel and it appears in a different color use the :guilabel:`Highlights` tab. To add other words or names to highlight you can press the :guilabel:`Add` button. To change what you want a name or word to be highlighted double click on the :guilabel:`Name` column. To toggle enabling being highlighted by the name check or uncheck the checkbox in the :guilabel:`Enabled` column. To make being highlighted case sensitive check the checkbox in the checkbox in the :guilabel:`CS` column. To use a regular expression for the rule to highlight check the checkbox in the :guilabel:`RegEx` column. To remove this highlight rule press the :guilabel:`Remove` button.
-
-.. image:: quassel-pref-highlights.png
-
-To change your settings Quassel getting and displaying backlogs can be set from :guilabel:`Backlog Fetching` tab. To change modes of backlog fetching to unread messages or a fixed number per chat use the :guilabel:`Backlog request method` drop down menu. If you choose a fixed amount you can change the :guilabel:`Initial backlog amount` to change how many lines you get. If you change the amount unread messages choose the :guilabel:`Limit` to get that many unread messages and then the :guilabel:`Additional Messages` will be shown for context.
-
-To change your settings on your notifications :menuselection:`Settings --> Notifications`. You can also get to this from the :guilabel:`Notifications` tab from the notifications tab. To select which event to change your settings left click on :guilabel:`Private message when focused`, :guilabel:`Highlight`, :guilabel:`Highlight When Focused`, or :guilabel:`Private Message`. If you do not know what highlight is it is when someone mentions your name in a channel. The checkbox :guilabel:`Play a Sound` allows you to to toggle playing a sound in the context. The checkbox :guilabel:`Show message in a popup` creates a popup notification when someone else mentions you. The :guilabel:`Log to file` puts the message in a file. The :guilabel:`Mark taskbar entry` makes the taskbar entry appear highlighted. To change what to do with the tray icon when you are highlighted by Quassel check the :guilabel:`Alert tray icon` and then select what you want to happen to the tray icon.
-
-.. image:: notificationsettings.png  
-
-To change your shortcut :menuselection:`Settings --> Configure Shortcuts`. To see what shortcut does look at the :guilabel:`Action` column in the table. To see what keyboard shortcut to press see the :guilabel:`Shortcut` column. To set a second keyboard shortcut to do something use the :guilabel:`Alternate` column.  To switch to a custom keyboard shortcut left click on the action in the action column press the :guilabel:`Custom` and then press the button to the right and input your keyboard shortcut. To restore your keyboard shortcuts to the defaults press the :guilabel:`Defaults` bottom at the bottom. To not make your changes for keyboard shortcuts press the :guilabel:`Cancel` button. To apply your changes to keyboard shortcuts and close the window press the :guilabel:`OK` button.
-
-.. image:: quassel-shortcut-keys.png
-
-Version
--------
-Lubuntu ships with version 1:0.14.1 of Quassel IRC.
-
-
-How to Launch
--------------
-To launch Quassel from the menu go to :menuselection:`Internet --> Quassel IRC` or type 
-
-.. code:: 
-
- quassel 
- 
-in the terminal. The icon for Quassel looks like a blue circle with a white crescent on it.

source/2/2.1/Internet_Applications.rst

@@ -9,5 +9,4 @@ This chapter documents how to use webbrowsers, IRC, and torrent clients.
 
    2.1.1/firefox
    2.1.2/qtransmission
-   2.1.3/Quassel_IRC
+   
-

source/2/2.2/2.2.1/libreoffice.rst

@@ -32,7 +32,7 @@ Screenshot
 
 Version
 -------
-Lubuntu ships with version 24.8.0 of LibreOffice.
+Lubuntu ships with version 25.2.2 of LibreOffice.
 
 How to Launch
 -------------

source/2/2.2/2.2.2/libreoffice_calc.rst

@@ -79,7 +79,7 @@ The :guilabel:`Chart Elements` tab controls labels and displaying legends on you
 
 Version
 -------
-Lubuntu ships with version 24.8.0 of LibreOffice Calc.
+Lubuntu ships with version 25.2.2 of LibreOffice Calc.
 
 How to Launch
 -------------

source/2/2.2/2.2.3/libreoffice_draw.rst

@@ -63,7 +63,7 @@ To print a drawing press :kbd:`Control+P` or :menuselection:`File --> Print`. To
 
 Version
 -------
-Lubuntu ships with version 24.8.0 of LibreOffice Draw.
+Lubuntu ships with version 25.2.2 of LibreOffice Draw.
 
 How to Launch
 -------------

source/2/2.2/2.2.4/libreoffice_impress.rst

@@ -124,7 +124,7 @@ To bring up custom settings for your settings :menuselection:`Slide Show --> Sli
 
 Version
 -------
- Lubuntu ships with version 24.8.0 of LibreOffice Impress.
+ Lubuntu ships with version 25.2.2 of LibreOffice Impress.
 
 How To Launch
 -------------

source/2/2.2/2.2.5/libreoffice_math.rst

@@ -31,7 +31,7 @@ To quit LibreOffice Math press :kbd:`Control+Q`.
 
 Version
 -------
-Lubuntu ships with Version 24.8.0 of LibreOffice Math.
+Lubuntu ships with Version 25.2.2 of LibreOffice Math.
 
 How to Launch
 -------------

source/2/2.2/2.2.6/libreoffice_writer.rst

@@ -144,7 +144,7 @@ To see statistics on your document use the :guilabel:`Statistics` tab. To see ho
 
 Version
 -------
-Lubuntu ships with LibreOffice Writer version 24.8.0
+Lubuntu ships with LibreOffice Writer version 25.2.2
 
 How to Launch
 -------------

source/2/2.3/2.3.1/lximage-qt.rst

@@ -68,7 +68,7 @@ The :guilabel:`Shortcuts` tab has settings for changing keyboard shortcuts in LX
 
 Version
 -------
-Lubuntu ships with version 2.0.1 or LXImage-Qt. 
+Lubuntu ships with version 2.1.1 or LXImage-Qt. 
 
 How to Launch
 -------------

source/2/2.3/2.3.3/Skanlite.rst

@@ -9,23 +9,26 @@ To preview what you want to scan press the :guilabel:`Preview` button and you ca
 
 If your scanner is not detected a you will get a device saying "Sorry no devices detected" while having a button for :guilabel:`Reload devices list` to try and find your scanner again. If you want to cancel press the :guilabel:`Cancel` button.
 
+.. image:: skanlite.png
+
 To change the dpi or dots per inch is the dpi drop down menu for :guilabel:`Scan resolution` but keep in mind the higher the number of dpi the better the picture quality but the longer it will take to scan. Changing the :guilabel:`Scan mode` allows you to select color to select color scanning or gray to only show your scan in gray and not use color ink if you would want to print it out again.  
 
 To zoom in press the magnifying glass button with a plus sign conversely to move out press the magnifying glass button with a minus sign. To change your resolution change the scan resolution drop down and select the dots per inch you want to use.
 
-To change the brightness of a scan slide the :guilabel:`Brightness` slider or input a positive or negative number into the numeric field. To change contrast slide the :guilabel:`Contrast` slider or input a positive or negative number in the numeric field. To toggle inverting your colors on the scan check/uncheck the :guilabel:`Invert colors` Checkbox. 
+To change brightness, contrast or even invert colors use the :guilabel:`Advanced Options` tab. To change the brightness of a scan slide the :guilabel:`Brightness` slider or input a positive or negative number into the numeric field. To change contrast slide the :guilabel:`Contrast` slider or input a positive or negative number in the numeric field. To toggle inverting your colors on the scan check/uncheck the :guilabel:`Invert colors` Checkbox. To change the delay between scans in a batch scans when scanning in batch mode use the :guilabel:`batch mode delay time` field.
 
-To select part of a scan you particularly want to save is to click over a preview of a scan and you will drag the selection with the mouse. To clear selections that can be automatically selected but canceled with a brown smudge with an x on it. If you want to zoom to your selection right click :guilabel:`Zoom to selection`. If you want to zoom to fit the whole entire page right click :guilabel:`Zoom to fit`. 
+.. image:: skanlite-advanced.png
+
+To select part of a scan you particularly want to save is to click over a preview of a scan and you will drag the selection with the mouse. To clear selections that can be automatically selected but canceled by press the :guilabel:`leftward pointing arrow with an x` on it. If you want to zoom to your selection right click :guilabel:`Zoom to selection`. If you want to zoom to fit the whole entire page right click :guilabel:`Zoom to fit`. To zoom in the scan preview press the :guilabel:`+` button.To zoom out from the scan preview press the :guilabel:`-` button.
 
 To change to your specific options for your scanner use the :guilabel:`Scanner Specific Options` tab.
 
 Version
 -------
-Lubuntu ships with version 23.08.3 of Skanlite.
+Lubuntu ships with version 24.12.3 of Skanlite.
+
+
 
-Screenshot
-----------
-.. image:: skanlite.png
 
 How to Launch
 -------------
@@ -39,6 +42,8 @@ from the command line. The icon for Skanlite looks like a scanner bed with a bar
 
 Customizing
 -----------
-To customize your settings for Skanlite press the :guilabel:`Settings` button. To choose where to save your scans enter the path in the :guilabel:`Save Location` field or press the button to the right. To ask what to save what you are scanning change the :guilabel:`Save mode` menu :menuselection:`Open the save dialog for every image`. To ask for each scan in the :guilabel:`Save Mode` menu select :menuselection:`Open the save dialog for first image only` selection. To choose the default save name and format enter in the :guilabel:`Name & Format` filed with a drop down menu for scan format. To choose what quality to save your quality check the :guilabel:`Specify save quality` checkbox. Then drag the slider or percentage to change the quality. To change the Dots per inch resolution when previewing check the :guilabel:`Set preview resolution` checkbox and then change field to the right side. To not automatically crop the selection check the :guilabel:`Disable automatic selections` checkbox. To get the scanner back to its default values press the :guilabel:`Revert scanner options to default values`.
+To customize your settings for Skanlite press the :guilabel:`Configure` button. To choose where to save your scans enter the path in the :guilabel:`Save Location` field or press the button to the right to open a file picker. To ask what to save what you are scanning change the :guilabel:`Save mode` menu :menuselection:`Open the save dialog for every image`. To ask for each scan in the :guilabel:`Save Mode` menu select :menuselection:`Open the save dialog for first image only` selection. To choose the default save name and format enter in the :guilabel:`Name & Format` filed with a drop down menu for what filetype to save your scans. To choose what quality to save your quality check the :guilabel:`Specify save quality` checkbox and select the quality in the field to the right. Then drag the slider or percentage to change the quality.
+
+To change the Dots per inch resolution when previewing check the :guilabel:`Set preview resolution` checkbox and then change field to the right side. To not automatically crop the selection check the :guilabel:`Disable automatic selections` checkbox. To get the scanner back to its default values press the :guilabel:`Revert scanner options to default values`.
 
 .. image:: skanlite-pref.png

source/2/2.4/2.4.1/lxqt-archiver.rst

@@ -15,7 +15,7 @@ To create a new archive press :menuselection:`File --> New` or press :kbd:`Contr
 
 To navigate to a folder inside of an archive double click on it in the center of the window or double click on the left side pane. To move back up in a directory double click on the folder :guilabel:`..`. To select all files press :kbd:`Control + A` or :menuselection:`Edit --> Select All`.
 
-To reload the view of the archive press :kbd:`F5` or :menuselection:`View --> Reload`. To view the whole directory tree press :kbd:`Control+ Shift + E` or :menuselection:`View --> Expand`. To view just the top level of directory tree press :kbd:`Control + Shift + C` or :menuselection:`View --> Collapse`. To search for files press :kbd:`Control +F` or :menuselection:`View --> Filter`. Type what you want to search for in the textbox at the bottom. To hide searching press :kbd:`Control+F` or :menuselection:`View --> Filter` again.
+To reload the view of the archive press :kbd:`F5` or :menuselection:`View --> Reload`. To view the whole directory tree press :kbd:`Control+ Shift + E` or :menuselection:`View --> Expand`. To view just the top level of directory tree press :kbd:`Control + Shift + C` or :menuselection:`View --> Collapse`. To search for files press :kbd:`Control +F` or :menuselection:`View --> Filter`. Type what you want to search for in the textbox at the bottom. To clear search press the :guilabel:`rightward pointing arrow with an x in it`. To hide searching press :kbd:`Control+F` or :menuselection:`View --> Filter` again.
 
 .. image:: lxqt-archiver.png
 
@@ -25,7 +25,7 @@ To close LXQt File Archiver press :kbd:`Control+Q`.
 
 Version
 -------
-Lubuntu ships with version 1.0.0 of LXQt File Archiver.
+Lubuntu ships with version 1.1.0 of LXQt File Archiver.
 
 How To Launch
 -------------

source/2/2.4/2.4.2/Featherpad.rst

@@ -76,7 +76,7 @@ To open a spell check window press :kbd:`F2` or :menuselection:`Edit --> Check S
 
 .. image:: Featherpad-spellcheck.png
 
-To view what words you have added to your dictionary :menuselection:`Edit --> User Dictionary`. To get spellcheck to work the first time you will need to select a language to run on :guilabel:`Hunspell dictionary path` on the :guilabel:`Text` tab of FeatherPad preferences.
+To view what words you have added to your dictionary :menuselection:`Edit --> User Dictionary`. You can enter many words in here if you wish to add many new words to your custom dictionary all at once or move another dictionary file to this one to migrate to a new install. To get spellcheck to work the first time you will need to select a language to run on :guilabel:`Hunspell dictionary path` on the :guilabel:`Text` tab of FeatherPad preferences.
 
 Saving Sessions
 ---------------
@@ -86,7 +86,7 @@ To open all the files if you work on several together in a session press :kbd:`C
 
 Customizing
 ------------
-To view the preferences for FeatherPad press :kbd:`control +Shift +P` or :menuselection:`Options --> Preferences`. To change settings on how  FeatherPad handles the window use the :guilabel:`Window` tab. To have FeatherPad be the same size as when you last closed it check the :guilabel:`Remember window size on Closing` checkbox. If you choose for FeatherPad not to remember size you can change :guilabel:`Start with this size` field for height and width to start FeatherPad. To have FeatherPad appear on the same position it was when FeatherPad was closed check the :guilabel:`Remember window position on closing` checkbox. To start with the side-pane on FeatherPad check the :guilabel:`Start with side-pane mode`. To hide the toolbar you can press the :guilabel:`Do not show toolbar` checkbox. To not show the menubar by default check the :guilabel:`Do not show menubar` checkbox. To show the window title on the mneubar check the :guilabel:`Show window title on menubar` checkbox. To turn of keyboard shortcuts with the :kbd:`Alt` keys for navigating menus check the :guilabel:`Disable menubar accelarators` checkbox. To use your system icons when possible check the :guilabel:`Use system icons when possible` checkbox. To have the searchbar hidden by default check the :guilabel:`Hide search bar by default` checkbox. To have the same search history across all tabs use the :guilabel:`Use a shared search history` checkbox. To show where your cursor is on the statusbar at the bottom check the :guilabel:`Show cursor position on status bar`.
+To view the preferences for FeatherPad press :kbd:`control +Shift +P` or :menuselection:`Options --> Preferences`. To change settings on how  FeatherPad handles the window use the :guilabel:`Window` tab. To have FeatherPad be the same size as when you last closed it check the :guilabel:`Remember window size on Closing` checkbox. If you choose for FeatherPad not to remember size you can change :guilabel:`Start with this size` field for height and width to start FeatherPad. To have FeatherPad appear on the same position it was when FeatherPad was closed check the :guilabel:`Remember window position on closing` checkbox. To start with the side-pane on FeatherPad check the :guilabel:`Start with side-pane mode`. To hide the toolbar you can press the :guilabel:`Do not show toolbar` checkbox. To not show the menubar by default check the :guilabel:`Do not show menubar` checkbox. To show the window title on the menubar check the :guilabel:`Show window title on menubar` checkbox. To turn of keyboard shortcuts with the :kbd:`Alt` keys for navigating menus check the :guilabel:`Disable menubar accelerators` checkbox. To use your system icons when possible check the :guilabel:`Use system icons when possible` checkbox. To have the searchbar hidden by default check the :guilabel:`Hide search bar by default` checkbox. To have the same search history across all tabs use the :guilabel:`Use a shared search history` checkbox. To show where your cursor is on the statusbar at the bottom check the :guilabel:`Show cursor position on status bar`.
 
 The :guilabel:`Tab position` menu moves where the tab around on the screen. To hide the tabbar with only one tab check the :guilabel:`Do not show a single tab` checkbox. To have the window close after closing the last tab check the :guilabel:`Close window on closing its last tab`. To have FeatherPad open a new window when you are on a different virtual desktop check the :guilabel:`Always open in separate windows` checkbox. The checkbox :guilabel:`Native file dialog` uses the systems file dialog to integrate with the system.
 
@@ -114,7 +114,7 @@ To change what colors you use in syntax highlighting use the :guilabel:`Syntax C
 
 Version 
 -------
-Lubuntu ships with version 1.5.1 of FeatherPad. 
+Lubuntu ships with version 1.6.0 of FeatherPad. 
 
 How to Launch
 -------------

source/2/2.4/2.4.3/Kcalc.rst

@@ -1,106 +0,0 @@
-Chapter 2.4.3 KCalc
-===================
-
-KCalc is the default scientific calculator application for Lubuntu.
-
-Features:
-
- - Trigonometric functions
- - Factorials
- - Built in mathematical and scientific constants.
- - Memory
- - Copy and paste
-
-Usage
-------
-To do simple arithmetic click the number buttons or type them on your keyboard and then press the sign for addition, multiplication, subtraction,  or division. You can also type in the numbers and press :guilabel:`+` for addition, :guilabel:`-` for subtraction, :guilabel:`x` for multiplication and the division symbol for division. To view the answer press the button that is an :guilabel:`=`. To enter a percentage press :kbd:`%` or left click :guilabel:`%`. To view a summary of each button you can mouse over to get a verbal description of the button. If you make a mistake entering in a number you can press the :kbd:`Backspace` key.
- 
-.. image:: Kcalc.png
-
-To make a number negative press the button that looks like a :guilabel:`+/-`. To insert decimals press the decimal point button which looks like a :guilabel:`.` when you get to the part which is less than a whole number. To clear input from KCalc before the last operator press the button with a :guilabel:`C` on it. To clear all input from KCalc press the :guilabel:`AC` button. To group operations so they happen together use the parenthesis to make things grouped together for example 2*(2+3) would give the result of 10 because it would add 2 and 3 and then multiply by two. You can also press the :guilabel:`(` or :guilabel:`)` buttons to make parenthesis to change the order of operations.
-
-To undo an operation press :kbd:`Control+Z` or :menuselection:`Edit --> Undo`. To redo an operation press :kbd:`Control+Shift+Z` or :menuselection:`Edit --> Redo`. 
-
-To copy and answer out of KCalc press :kbd:`control + c` or :menuselection:`Edit --> Copy` from the menu. To paste a number into KCalc you can press :kbd:`control + v` or :menuselection:`Edit --> Paste` from the menu. To cut the text from KCalc press :kbd:`control +x` or :menuselection:`Edit --> Cut` from the menu.
-
-To view your history what you have calculated in KCalc press :kbd:`Control+h` or :menuselection:`Settings --> Show History`. To hide your history do the same thing again. You can select text with the mouse in KCalc and then right click select :menuselection:`Copy` or press :kbd:`Control+C` to copy what you have previously calculated. To select all of the history press :kbd:`Control+A` or right click :menuselection:`Select All`.
-
-.. image:: kcalc-history.png
-
-To get a main toolbar right click on the main menus and select :menuselection:`Main Toolbar`.
-
-To quit KCalc press :kbd:`Control+Q`.
-
-Scientific calculator mode advanced functionality
--------------------------------------------------
-
-If you want even more functionality of KCalc there is also scientific mode which is accessed from :menuselection:`Settings --> Science Mode` radio button. The button :guilabel:`1/x` takes takes 1 and divides it by the number currently on the calculator also known as taking the reciprocal. The :guilabel:`x!` button read x factorial will take the number X you entered and multiple each number going down to 1 for example 5! would multiply 5*4*3*2*1.
-
-The x :superscript:`2` button will multiply x by itself or square x. The button with x :superscript:`y` will take x the number you have in will exponentiate x to the power of y. The x :superscript:`3` button will cube the result or raise it to the third power. The x 10 :superscript:`y` will end up multiplying x by 10 to the power of y so for example to multiply 5 by 10 to the power of 3 entering in will give the answer of 5,000.
-
-To change the unit that angles are measured in for trigonometric units in KCalc. Degrees take 360 to form a full circle while, 2Π radians form a full circle and 400 gradians form a full circle. The radio button :guilabel:`Deg` is to select Degrees as the unit for angles, :guilabel:`Rad` selects radian as the unit of measurement of angles and :guilabel:`Grad` selects Gradians as the unit of measurement for angles. The :guilabel:`Sin` button takes what you have as the input and takes the trigonometric sine function of that value measured in the unit for angles you have selected. The :guilabel:`Cos` button takes the cosine of the value in the unit of angle you have selected. The :guilabel:`Tan` button takes the tangent of the angle in the current units.
-
-.. image:: kcalc-scientific.png
-
-If you make a mistake entering a long input into KCalc press the button that looks like a leftward pointing arrow button to correct your mistake just like pressing :kbd:`Backspace`.
-
-To have a log with the base of 10 type the number you want to take the log of then press the :guilabel:`Log` button. To take a log based off e, the natural logarithm, type the number you want to take the logarithm of then press the :guilabel:`Ln` button.
-
-The Scientific mode also brings in a menu for many different predetermined constants under the :menuselection:`Constants`. If you want a button for  constants check the :menuselection:`Settings --> Constants Buttons` checkbox. To input the first constant press the :guilabel:`C1` button for the first constant and so on for the other constants.
- 
-To store a value in memory press the :guilabel:`M+` Button. To retrieve a value from memory press the :guilabel:`MR` button. To clear a value from memory press the :guilabel:`MC` button.
-
-Numerical System mode
----------------------
-To switch the calculator into number system mode :menuselection:`Settings --> Numeral System Mode`. The numerical system mode lets you change your numerical base instead of say the default base 10. To switch to a binary calculations click the :guilabel:`Bin` radio button. To switch the Octal or base 8 format click the :guilabel:`Oct` radio button. To switch to a hexadecimal format or base 16 format click the :guilabel:`Hexadecimal` radio button. For numbers greater than 10 for hexadecimal press the :guilabel:`A`-:guilabel:`F` buttons standing in for numbers 10-15 in base 10. When you are in number that are not part of a numerical base the button will get grayed out. To switch back to decimal or base 10 press the :guilabel:`Dec` radio button.   
-
-.. image:: kcalcnummode.png
-
-If you type a number into in your numerical base you will see the underneath the buttons will show what that number is in that numerical base. To be able to change each the bits use for each operation select :menuselection:`Settings --> Show bit edit`. Then to see which bits are shown will be below what you enter into the calculator and above the numerical bases. Each number you enter will in binary have a black square if it has a 1 in binary representation for that digit and a white square if it is zero. To flip a bit simply left click on it.
-
-To perform a bitwise and on the binary numbers which takes both the 1s for both numbers enter one number press the :guilabel:`AND` button and then enter your second number. To get which number either number has in each bit, a bitwsie or, enter your first number press the :guilabel:`OR` button and then enter your second number. To choose the bits that are exclusively different, a bitwise exclusive or, enter one number press the :guilabel:`XOR` button and then enter your second number. To shift the bits of a number to the left on a number press the :guilabel:`Lsh` button and then the number of bits you want to shift over. To shift a number of bits to the right press the :guilabel:`Rsh` button and then the number of bits you wish to shift over. To flip all the bits of a number press the :guilabel:`Cmp` to take a ones' complement.
-
-
-Statistic Mode
-----------------
-To enter Statistic mode :menuselection:`Settings --> Statistic Mode`. To enter multiple entries of data press the :guilabel:`Dat` button to enter data. To show how many pieces of data you have entered press the :guilabel:`N`. To view the mean or average of all the data press the :guilabel:`Mea` button. To view the standard deviation of the data press the :guilabel:`σ` with a subscript n button. To view the median of the data press the :guilabel:`Med` button. To clear the statistical memory press the :guilabel:`CSt` button. 
-
-.. image:: kcalcstatistic.png
-
-Customizing
------------
-To open configuration for KCalc press :kbd:`Control+Shift+ ,` or :menuselection:`Settings --> Configure KCalc`. To view your settings for precision or digit grouping use the :guilabel:`General` tab. To change the maximum number of digits change the :guilabel:`Maximum number of digits` field. To have KCalc set decimal precision to only a certain number of places after the decimal place check the :guilabel:`Set decimal precision` checkbox and select the number of digits after the decimal place. If you ant to show the result in the window title check the :guilabel:`Show result in window title` checkbox. To have KCalc group digits together check the :guilabel:`Group digits` checkbox. To change how many digits to group in different numerical bases change the field for each numerical base.
-
-To cancel and not apply your changes press the :guilabel:`Cancel` button along the bottom. To apply your changes and not exit from this window press the :guilabel:`Apply` button. To restore the settings to your defaults press the :guilabel:`Restore Defaults` button. To apply your changes if any and close this window press the :guilabel:`OK` button.
-
-.. image:: kcalcpref.png
-
-The :guilabel:`Font` tab has settings to change settings with your fonts. To choose the font for your buttons on your calculator :guilabel:`Button font` and press the :guilabel:`Pencil` button to the font for the buttons on your calculator. To change the font for the display of the calculator. :guilabel:`Display font` will change how the and the :guilabel:`Pencil` button. To change what font will be used for displaying KCalc history change the :guilabel:`History font` field.
-
-.. image:: kcalc-font-screenshot.png
-
-The :guilabel:`Colors` tab has the colors of your user interface. To change your foreground color will change how the display or the number in the interface is the color next to :guilabel:`Foreground` color area to select. To change the background color of your display choose a different color on the :guilabel:`Background` button. To change the background color of the function buttons press the button next to :guilabel:`Functions`. To a change the color of the function button press button next to :guilabel:`Statistical functions`. To change the background color for hexadecimal functions :guilabel:`Hexadecimals`. To change the backgrounds of the numbers buttons press the button next to  :guilabel:`Numbers`. To change the background of the memory keys press the button next to :guilabel:`Memory`. To change the background of operations press the button next to :guilabel:`Operations`.
-
-.. image:: kcalc-colors.png
-
-To change your settings for :guilabel:`Constants` use the constants tab. To input a constant you have in the field to the left is the name of the constant on the field to the left. The filed in the center is where you put the value of the constant. To select from predefined constants press on the :guilabel:`Predefined` to bring up a menu of predefined constants.
-
-.. image:: kcalc-constants.png
-
-To customize your shortcuts for KCalc :menuselection:`Settings --> Keyboard Shortcuts` or press :kbd:`Control + Alt + ,`. To see what your shortcut does read the :guilabel:`Action` column. To see what keys to press the shortcut is in the :guilabel:`Shortcut` column. To see or set a second shortcut to see what activates this is in the :guilabel:`Alternate` column. To change your shortcuts press the :guilabel:`Custom` button and then left click on it and input the shortcut you want. To reset your shortcuts to default press the :guilabel:`Restore Defaults` button. To not make your changes to the shortcuts you made press the :guilabel:`Cancel` button. To use your new shortcuts as a calculator press the :guilabel:`OK` button.
-
-.. image:: kcalc-shortcuts.png
-
-Version
--------
-Lubuntu ships with version 24.08.0 of KCalc.
-
-How to Launch
--------------
-To launch KCalc go to :menuselection:`Accessories --> KCalc` or run
-
-.. code::
-
-   kcalc
- 
-from the command line. The icon for KCalc looks like a box with a + sign a - sign a multiplication sign and an equals sign. If your computer has a calculator key you can press :kbd:`Calculator`.

source/2/2.4/2.4.3/Qalculate.rst

@@ -0,0 +1,137 @@
+Chapter 2.4.3 Qalculate!
+========================
+
+Qalculate! is the default calculator shipped in Lubuntu since 25.04.
+
+Usage
+-----
+To do simple arithmetic computations type the numbers into the field just below the toolbar. To start a calculation press :kbd:`enter` or press the :guilabel:`=` button. To add multiple numbers press :kbd:`+` or click the :guilabel:`+` button. To subtract two numbers press :kbd:`-` or click :guilabel:`-`. To multiply two numbers press :kbd:`*` or click :guilabel:`x`. To divide two numbers press :kbd:`/` or click the :guilabel:`/` button. To input decimals into Qalculate! type :kbd:`.` as the decimal point or click :guilabel:`.` To input the last answer you calculated click the :guilabel:`ANS` button. To delete the last character you typed press :kbd:`backspace` or click the :guilabel:`trash can` button. To clear all you have inputted left click the :guilabel:`Leftward pointing arrow with an x` button or press :kbd:`Escape`. To start doing an operation first use a parenthesis to do an operation first :kbd:`(` or click :guilabel:`(`. To close the operation you want to do first in order of operations use a close parenthesis so press :kbd:`)` or left click on :guilabel:`)`. To have both an open and close parentheses click the :guilabel:`(x)` button. If you have an error in your syntax an orange triangle will show up. To get more information on what your error is mouseover the orange triangle. To get more information on a button you can also mouseover that button.
+
+.. image:: qalculate-mainwindow.png
+
+Below where you type in calculations is a history of your previous calculations. To go back in your history press the :kbd:`Down arrow` key. To go one step forward in your history press the :kbd:`Up arrow` key. To move the cursor one character to the left press the :kbd:`left arrow` key or left click the :guilabel:`left arrow`. To move the cursor one arrow to the right press the :kbd:`right arrow` key or left click the :guilabel:`right arrow` key. To move the cursor to the end press the :kbd:`End` key or right click the :guilabel:`right arrow` button. To move the cursor to the start press the :kbd:`Home` key or right click the :guilabel:`left arrow` button.
+
+To copy text from Qalculate! select the text and press :kbd:`Control + C` or right click and select :menuselection:`Copy`. To cut the text from Qalculate! press :kbd:`Control +X` or right click and select :menuselection:`Cut`. To past text press :kbd:`Control +V` or right click and select :menuselection:`Paste`.
+
+To store a value in calculator memory left click the :guilabel:`MS` button. To later get the same value out of the calculator left click the :guilabel:`MR` button. To clear the memory stored in the calculator press the :guilabel:`MC` button.
+
+To view only Text for the toolbar menus right click on the toolbar and select :menuselection:`Text Only`. To have text beside icons on the toolbar menus right click on the toolbar and select :menuselection:`Text Beside Icons`. To have a text underneath icons on the toolbar menus right click on the toolbar and select :menuselection:`Text under icons`. To switch back to only showing icons on the toolbar menus right click and select :menuselection:`Icons Only`. To toggle showing the toolbar right click on the toolbar and check/uncheck :menuselection:`Show Toolbar`.
+
+.. image:: qalculate-text-under-icons.png
+
+To take the reminder when dividing something you can type :kbd:`%` or left click :guilabel:`1` between two numbers like :kbd:`9%2` to get the remainder of 9/2. You can also type :kbd:`%` or left click :guilabel:`%` after a number as a percent of a number.  To insert the number π left click on the :guilabel:`π` button. To add e the base of the natural logarithm left type :kbd:`e`, left click :kbd:`EXP`, or left click the :guilabel:`e` button. You also can use e a shorthand for scientific notation by typing :kbd:`e`, left click :guilabel:`EXP`, or left clicking the :guilabel:`e` button for example:kbd:`6e2` to mean 6 \*10^2. To input i the square root of negative 1 the imaginary number type :kbd:`i` or left click the :guilabel:`i`.
+
+To bring up a percent calculator your can left click on the arrow next to :guilabel:`%` and select :menuselection:`Percent Calculation Tool` or left click on the three bars to the right and select :menuselection:`Percent Calculation Tool`. Enter the first value in the :guilabel:`Value 1` field. Enter the second value in the :guilabel:`Value 2` field. Then you can see below your values the changes, percent change 1 to 2 and then the percentage of each number compared to each other. If you want to clear the values you have entered left click on the :guilabel:`Clear` button.
+
+.. image:: qalculate-percentage.png
+
+To view dates in many different calendars left click on the :guilabel:`three bars` on the right and select :menuselection:`Calendar Conversion`. To view a periodic table left click on the :guilabel:`three bars` on the right and select :menuselection:`Periodic Table`. To view a list of keyboard shortcuts left click on the :guilabel:`three bars` on the right and select :menuselection:`Keyboard shortcuts`.
+
+To force a minimum number of decimal points after the result left click on the left most :guilabel:`two sliders` button and enter how many numbers after the decimal point in :menuselection:`Min decimals`. To have a maximum number after the decimal point left click on the left most :guilabel:`Two sliders` in the :menuselection:`Max decimals` field. 
+
+To test an test if two things are equal you can type :kbd:`=` between two expressions or left click :guilabel:`x=` and then get true or false on if there is equality. To test if something is not equal long left click on :menuselection:`x= --> ≠` or type in :kbd:`≠` between two expressions. To test if one expression is less than the other expression type in :kbd:`<` or long left click on :menuselection:`x= --> <` between two expression. To test if another expression is less than or equal type in :kbd:`≤` or long left click on :menuselection:`x= --> ≤` between two expressions. To test if one expression is greater than another type :kbd:`>` or long click on :menuselection:`x= --> >` between two expressions. To test if one expression is greater than or equal to another type :kbd:`≥` or long left click on :menuselection:`x= --> ≥`. Many of these get their own button on the algebra keypad which can be switched to with the menu with 10 points :menuselection:`Keypad --> Algebra`.
+
+To select the general keypad left click the 10 numbers :menuselection:`Keypad --> General`. To switch to a programming Keypad left click the 10 numbers :menuselection:`Keypad --> Programming`. To switch to an Algebra keypad left click the 10 dots :menuselection:`Keypad --> Algebra`. To have a custom keypad left click the 10 digits :menuselection:`Keypad --> Custom`. To add something to your custom keypad right click on an empty button. To toggle having no keypad press :kbd:`Control +K` or left click :menuselection:`Keypad --> None`. To hide the numberpad buttons uncheck the :menuselection:`Keypad --> Always show numberpad`. To just have the numberpad when not always shown select :menuselection:`Keypad --> Numberpad`.
+
+To have Qalculate! solve an equation type :kbd:`Solve()` or long click on :menuselection:`x= --> Solve Equation`. 
+
+Trigonometry
+-------------
+Qalculate! offers many different trigonometric functions. When using these functions having the correct angle unit is important to have the angle unit set correctly or else you will get the wrong answer. To set the angle unit to degrees left click the left most button with two sliders and select :menuselection:`Degrees` in which 360 degrees make one full circle. To set the angle unit to radians in which 2π radians make one full circle left click the left most button on the toolbar and select :menuselection:`Radians`. To have the angle unit set to Gradians in which 400 gradians make a full circle left the leftmost button on the toolbar and select :menuselection:`Gradians`.
+
+To take the sine function of something left click the :guilabel:`sin` button or type :kbd:`sin()`. To take the inverse sine function of something right click the :guilabel:`sin` button or type :kbd:`arcsin()`. To take the cosine of something left click the :guilabel:`cos` button or type :kbd:`cos()`. To take the tangent function of something left click on the :guilabel:`tan` button or type :kbd:`tan()`. To take the inverse tangent right click on the :guilabel:`tan` button or type :kbd:`arctan()`.
+
+
+Exponents and Roots
+-------------------
+To exponentiate a base number to a power left click x :sup:`y` or type :kbd:`^`. To square a number right click x :sup:`y` or type :kbd:`sq()` around what you want to square. To raise e to a power middle click x :sup:`y` or type :kbd:`exp()` around what power you want to raise e to. To take the square root of something left click the :guilabel:`√` button or insert a :kbd:`√` character. To take the cube root of something right click the :guilabel:`√` button or type :kbd:`cbrt()`. To take the nth root of something middle click on the :guilabel:`√` button or type :kbd:`root( , )` where the first thing is what you are taking the root of and the second is which root to take.
+
+To take a natural logarithm left click on the :guilabel:`ln` button or type in :kbd:`ln()`. To take a  logarithm on base 10 right click on the :guilabel:`ln()` button or type in :kbd:`log10()`. To take a logarithm with base n middle click on :guilabel:`ln` and then input your base.
+
+Combinatorics
+-------------
+to take take a factorial of an integer type :kbd:`x!` after it or left click the :guilabel:`!` button. To take the number of permutations right click on the :guilabel:`x!` or type :kbd:`perm()`. To take the number of combinations fo something middle click on :guilabel:`x!` or type :kbd:`comb()`.
+
+Summation/Products
+------------------
+To take a sum of several numbers left click the :guilabel:`Σ` button, type :kbd:`Σ()`, or type :kbd:`sum()`. To take the product of several things right click the :guilabel:`Σ` button, type :kbd:`Π()`, or type :kbd:`product()`.
+
+
+Saving Variables
+----------------
+To save a new variable in Qalculate! press :kbd:`Control +S` or left click the :guilabel:`floppy disk` icon and a window will popup. Type a name for your variable in the :guilabel:`Name` field. The :guilabel:`Required` tab is for required fields for your variable. Type what you want your variable to be equal too in the :guilabel:`Value` field. To add additional description to your variable use the :guilabel:`Description` tab. Choose which category to put this variable in in :guilabel:`Category`. To give a descriptive name to your variable type that in :guilabel:`Descriptive name`. To toggle hiding a variable check/uncheck the :guilabel:`Hide variable` checkbox. To add more description to your variable type that in the :guilabel:`Description` field.
+
+Functions
+---------
+To bring up an extensive list of functions left click the :guilabel:`fx` button or press :kbd:`Control + F`. On the left hand side of the window is a :guilabel:`Category` column and to choose functions from that category left click on the category name. To see a list of the actual function are under the :guilabel:`Function` column. To insert a function into the main window left click the :guilabel:`Insert` button. To calculate an answer in a popup left click the :guilabel:`Calculate` button. To search for a function type in the magnifying glass field. To save a function in your favorites check the :guilabel:`Favorite` checkbox.
+
+.. image:: qalculate-functions.png
+
+Units
+-----
+To have a large list of many different units you can open by pressing :kbd:`control +U` or left click on the :guilabel:`ruler` button. Under the left column labeled :guilabel:`Category` and left click on a category to select that category of unit. To search for a unit type in the :guilabel:`Magnifying glass` button. To select a unit left click on it on the right column. To insert the unit left click on the :guilabel:`Insert` button. To add a unit to your favorites check the :guilabel:`Favorite` checkbox. To convert between units enter the number in the bottom of the window and then type how many units to convert from in the second from the bottom field and then select the bottom right field what to convert to will show the  converted result.
+
+.. image:: qalculate-units.png
+
+Qalculate also does many operations with fractions. To input 1/2 into something you can middle click on the :guilabel:`2` button. Similarly to input 1/3 middle click on :guilabel:`3` and for 1/4 middle click on :guilabel:`4` and so on. Qalculate will also simplify fractions if you type them in so if you type in 4/16 Qalculate! will reduce it to 1/4 and then also provide a decimal answer with a :guilabel:`=` sign for an exact value or an :guilabel:`≈` for an approximate solution if not exact. Qalculate! will also let you add, subtract, multiply, divide, or more advanced fractions with fractions and still show the result as fractions.
+
+Plotting
+--------
+To plot functions in Qalculate! press :kbd:`Control + P` or left click on the :guilabel:`graph` button.  The :guilabel:`Data` tab will have info on what you want values to plot. To give your name to a function to plot enter that in the :guilabel:`Title` field. Type what you want to plot in the :guilabel:`Expression` field. To change what each variable is called change the :guilabel:`X variable` field. To change what style to draw the plot change the :guilabel:`Style` drop down. To change how to smooth your plot use the :guilabel:`Smoothing` drop down. To add another function to be plotted left click the :guilabel:`Add` button. To have the plot redrawn with your changes left click the :guilabel:`Apply` button. To remove something you want to plot left click the :guilabel:`Remove` button. On the bottom of this window is a list of everything you have to plot. The title of what you are plotting is listed in the :guilabel:`Title` column. The formula for what you are plotting is in the :guilabel:`Expression` column.
+
+.. image:: qalculate-plot-data.png
+
+To change what values to take in the functions use the :guilabel:`Function Range` tab. To change what the lowest value for x to plot enter :guilabel:`Minimum x value` field. To change the highest value to plot use the :guilabel:`Maximum x value`. To change how many points to plot change the :guilabel:`Sampling rate` field. To only show the real part of functions uncheck the :guilabel:`Show real and imaginary parts` checkbox. To apply changes you make to your plot left click the :guilabel:`Apply` button.
+
+.. image:: qalculate-plot-function-range.png
+
+The :guilabel:`Appearance` tab changes how the plot you make will appear. To have a title for your plot type in the :guilabel:`Title` field. To choose to display a grid for your plot check the :guilabel:`Display grid` checkbox. To have a full border around your plot check the :guilabel:`Display full border` checkbox. To choose a lowest value to show on the y axis check the :guilabel:`Minimum y value` checkbox and select the minimum value you want to show. To have a logarithmic scale on the x axis check the :guilabel:`Logarithmic x scale` checkbox and then to the right input the logarithmic base. To have logarithmic scale on the y axis check the :guilabel:`Logarithmic y scale` checkbox and input the logarithmic base to the right. To put an label on your x axis type it in the :guilabel:`x-axis label` field. To have a label on your y axis type in in the :guilabel:`y-axis label` field. To change the width of your line change the :guilabel:`Line width` field. To change where to place the legend use the :guilabel:`Legend placement` drop down. To have your changes applied left click the :guilabel:`Apply` button. 
+
+.. image:: qalculate-plot-appearance.png
+
+.. image:: qalculate-plot-result.png
+
+Number Bases
+------------
+To view numbers in something other than the default base 10 press :kbd:`Control +B` or left click the :guilabel:`0110` button. This will show the result in Binary, Octal, Deciamal, and Hexadecimal with the different digits of each numerical base. To hide numerical bases press :kbd:`Control+B` again or left click :guilabel:`0110`. 
+
+To change what number base the answer is displayed in left click left most :guilabel:`slider button` and select the number base you want under :menuselection:`Result Base`. To change what numerical base to input expressions in left click the left most :guilabel:`slider button` and select a base under :menuselection:`Expression Base`.
+
+The programming keypad as menubutton for hexadecimal A-F and number base switching which can get by the 10 point icon :menuselection:`Keypad --> Programming`.
+
+Version
+-------
+Lubuntu ships with version 5.5.1 of Qalculate!
+
+How to Launch
+-------------
+To launch Qalculate! :menuselection:`Accessories --> Qalculate! (Qt)` or run 
+
+.. code :: 
+
+  qualculate-qt
+ 
+from the command line.
+
+Customizing
+-----------
+To open the preferences dialog for Qalculate! left click on the three bars :menuselection:`Menu --> Preferences`. To change settings on how Qalculate! appears use the :guilabel:`Look & Feel` tab. To not use the system language check the :guilabel:`Ignore system language` checkbox and select the language in the :guilabel:`Language` menu. To allow multiple Qalculate! instances check the :guilabel:`Allow multiple instances` checkbox. To clear the history of Qalculate! on exit check the :guilabel:`Clear history on exit` checkbox. To change the maximum number of lines of history saved change the :guilabel:`Max history lines saved` field. To close Qalculate with the escape key check the :guilabel:`Close application with escape key` checkbox. To not use keyboard keys for Reverse Polish Notation uncheck the :guilabel:`Use keys for RPN` checkbox. To have the :kbd:`^` key be used for a bitwise XOR check the :guilabel:`Use caret for bitwise XOR` checkbox. To start Qalculate always on top of other windows check the :guilabel:`Keep above other windows` checkbox. To preserve the height of history in your window check the :guilabel:`Preserve history height` checkbox.
+
+To change what to show in the window title use the :guilabel:`Window title` menu. To change what to show on tooltips use the :guilabel:`Tooltips` menu. To change what Qt style to show in Qalculate! use the :guilabel:`Style` menu. To enable dark mode on Qalculate! check the :guilabel:`Dark mode` checkbox. To disable cursor blinking check the :guilabel:`Disable cursor blinking` checkbox. To not colorize the result uncheck the :guilabel:`Colorize result` checkbox. To not format the result uncheck the :guilabel:`Format result` checkbox. To use a custom font for the result check the :guilabel:`Custom result font` checkbox and then click the button on the right to select a font. To have a custom font for your expression check the :guilabel:`Custom expression font` checkbox and then click the button to the right to select the font. To have a custom font for your keypad check the :guilabel:`Custom keypad font` checkbox and then click the button on the right to choose your font. To choose a custom font for the rest of the application use the :guilabel:`Custom application font` checkbox and then press the button on the right to change the font.
+
+.. image:: qalculate-lookfeel.png
+
+To have settings for how to format numbers use the :guilabel:`Numbers and Operators` tab. To output two complement in either binary or hexidecimal check the :guilabel:`Binary` checkbox or :guilabel:`Hexidecimal` checkbox next to :guilabel:`Two's complement output`. To change what input two's complement expects check the :guilabel:`Binary` or :guilabel:`Hexadecimal` checkbox next to :guilabel:`Two complement input`. To change what bits to put in binary change the :guilabel:`binary bits` menu. To use lower case letters check the :guilabel:`Use lower case letters in non-decimal numbers` checkbox. To use special symbols for base 12 numbers check the :guilabel:`Use special duodecimal symbols` checkbox. To use a dot as a multiplication sign check the :guilabel:`Use dot as multiplication sign` checkbox.To use the unicode division slash check the :guilabel:`Use Unicode division slash in output` checkbox. To have logical operators spelled out in words check the :guilabel:`Spell out logical operators` checkbox. To display scientific notation with E instead of 10^n check the :guilabel:`Use E-notation instead of 10^n` checkbox. 
+
+To switch imaginary units to j check the :guilabel:`Use j as imaginary unit` checkbox. To use a comma as a decimal separator check the :guilabel:`Use comma as decimal separator` checkbox. To ignore commas in number check the :guilabel:`Ignore comma in numbers` checkbox. To indicate repeating decimals check the :guilabel:`Indicate repeating decimals` checkbox. To have what you copy be unformated ASCII check the :guilabel:`Copy unformatted ASCII by default` checkbox. To change how to group digits change the :guilabel:`Digit grouping` menu. To automatically group digits when inputting them check the :guilabel:`Automatically group digits in input` checkbox. To change how to display intervals change the :guilabel:`Interval display` menu. To change how to round numbers change the :guilabel:`Rounding` menu. To change what form complex numbers take use the :guilabel:`Complex number form` menu.
+
+.. image:: qalculate-numops.png
+
+To change your settings with Units and Currencies use the :guilabel:`Units & Currencies` tab. To disable units uncheck the :guilabel:`Enable units` checkbox. To not abbreviate names uncheck the :guilabel:`Abbreviate names` checkbox. To use binary prefixes for information units check the :guilabel:`Use binary prefixes for information units` checkbox. To change how to automatically convert units use the :guilabel:`Automatic unit conversion` menu. To convert to mixed units check the :guilabel:`Convert to mixed units` checkbox. To use automatic unit prefixes use the :guilabel:`Automatic unit prefixes` menu. To use SI prefixes for everything check the :guilabel:`Enable all SI-prefixes` checkbox. To enable prefixes in unit denominators check the :guilabel:`Enable denominator prefixes` checkbox. To enable units when using physical constants check the :guilabel:`Enable units in physical constants` checkbox. To copy text without the units check the :guilabel:`Copy unformatted ASCII without units` checkbox. To change how to calculate Temperature use the :guilabel:`Temperature calculation` menu. To change when to update exchange rates change the :guilabel:`Exchange rates updates` field.
+
+.. image:: qalculate-unitscurrency.png
+
+To change how Qalculate! parsing things use the :guilabel:`Parsing & Calculation` tab. To choose where to store expression status use the :guilabel:`Expression status` menu. To change how long it takes a tooltip to display change the :guilabel:`Status tooltip delay` menu. To change how long to delay calculating as you type use the :guilabel:`Calculate as you type delay` field. To change if you want to display parsed entries in the history change the :guilabel:`Expression in history` menu. To change in history the expression after calculation use the :guilabel:`Expression after calculation` menu. To automatically copy the result of your calculations check the :guilabel:`Automatically copy result` checkbox. To change the parsing mode use the :guilabel:`Parsing mode` menu. To use simplified percentage calculation use the :guilabel:`Simplified percentage calculation` checkbox. To read precision check the :guilabel:`Read precision` checkbox. To use concise uncertainty input use the :guilabel:`Allow concise uncertainty input` checkbox. To limit implicit multiplication check the :guilabel:`Limit implicit multiplication` checkbox. To interpret any unrecognized symbol as a variable check the :guilabel:`Interpret unrecognized symbols as variables` checkbox. To change how to calculate interval change the :guilabel:`Interval calculation` menu. To factor your answers check the :guilabel:`Factorize result` checkbox. 
+
+
+.. image:: qalculate-parsinngcalc.png

source/2/2.4/2.4.4/pcmanfm-qt.rst

@@ -44,7 +44,7 @@ To select all files in a directory is to press :kbd:`Control+ A`, :menuselection
 
 .. image:: bulk-rename.png
 
-To connect to a remote server such as a NAS go to the :menuselection:`Go -->  Connect to server` and authenticate to your remote storage. If you want to plug in removable storage you can open the storage on the left sidebar with devices. To switch to the removable media left click on the device in the side pane. This also applies to other internal filesystems on your computer. To eject removable media press the button on the left with a circled up arrow to eject. On the side pane you can right click to open a place in a new tab by right clicking :menuselection:`Open in New Tab` on the side pane.
+To connect to a remote server such as a NAS go to the :menuselection:`Go -->  Connect to server` and authenticate to your remote storage. If you want to plug in removable storage you can open the storage on the left sidebar with devices. To switch to the removable media left click on the device in the side pane. This also applies to other internal filesystems on your computer. If you are mounting an encrpyed drive you will need to enter your passphrase to unlock the drive. To eject removable media press the button on the left with a circled up arrow to eject. On the side pane you can right click to open a place in a new tab by right clicking :menuselection:`Open in New Tab` on the side pane.
 
 .. image:: pcmanfm-qt-connect-server.png 
 
@@ -189,7 +189,7 @@ The :guilabel:`Advanced` tab shows integration with other programs and advanced
 
 Version
 -------
-Lubuntu currently ships with 2.0.0 of PCManFM-Qt. 
+Lubuntu currently ships with 2.1.0 of PCManFM-Qt. 
 
 How to Launch
 -------------

source/2/2.4/2.4.6/noblenote.rst

@@ -37,7 +37,7 @@ Screenshots
 
 Version
 -------
-Lubuntu ships with version 1.2.0 of nobleNote.
+Lubuntu ships with version 1.4.0 of nobleNote.
 
 How to Launch
 -------------

source/2/2.4/2.4.7/QtPass.rst

@@ -43,7 +43,7 @@ To change profile settings on QtPass use the :guilabel:`Profile` tab. To create
 
 Version
 -------
-Lubuntu ships with version 1.2.3 of QtPass.
+Lubuntu ships with version 1.4.0 of QtPass.
 
 How to Launch
 -------------

source/2/2.4/2.4.9/SDDM-Configuration.rst

@@ -11,7 +11,7 @@ To change SDDM settings with autologin use the :guilabel:`Autologin` tab. To hav
 
 To save your changes for SDDM-Configuration use the :guilabel:`Save` button. After pressing the :guilabel:`Save` button you will need to enter your password as this changes the login screen for all users. To undo your changes press the :guilabel:`Reset` button.
 
-The :guilabel:`General` tab has settings for turning off, rebooting, and keyboard input. To change what command to shut down your system use the :guilabel:`Halt command` field. To change what command to restart your system use the :guilabel:`Reboot command` field. To choose an input method module like an onscreen keyboard to be selectable on your login screen enter it in the :guilabel:`Input method module` screen. To change which state numlock is in when you login use the :guilabel:`Initial Numlock state` drop down.
+The :guilabel:`General` tab has settings for turning off, rebooting, and keyboard input. To change what command to shut down your system use the :guilabel:`Halt command` field. To change what command to restart your system use the :guilabel:`Reboot command` field. To choose an input method module like an onscreen keyboard to be selectable on your login screen enter it in the :guilabel:`Input method module` screen. To not have an onscreen keyboard make this field empty. To change which state numlock is in when you login use the :guilabel:`Initial Numlock state` drop down.
 
 .. image:: sddm-general.png
 

source/2/2.4/Accessories.rst

@@ -9,7 +9,7 @@ This chapter documents accessories on your system.
 
   2.4.1/lxqt-archiver
   2.4.2/Featherpad
-  2.4.3/Kcalc
+  2.4.3/Qalculate
   2.4.4/pcmanfm-qt
   2.4.5/Qlipper
   2.4.6/noblenote

source/2/2.5/2.5.2/vlc.rst

@@ -97,6 +97,14 @@ To save or convert a file in VLC press :kbd:`Control+R` or :menuselection:`Media
 
 To change what file format to convert to use the :guilabel:`Profile` drop down menu. To choose what file name to save your file use the :guilabel:`Browse` button. To start converting the file press the :guilabel:`Start` button. 
 
+Webcams
+------- 
+To open your webcam in VLC press :kbd:`Control +C` or :menuselection:`Media --> Open Capture Device` to pop up a dialog to select your webcam. Then select your webcam in :guilabel:`Video device name` which can default to something like /dev/video0. To start showing your webcam click :guilabel:`Play`. To choose what video standard for your deice use the :guilabel:`Video standard` drop down. To have more options on video settings press the :guilabel:`Advanced options` button.
+
+.. image:: vlc-webcams.png
+
+To take a still picture of your webcam then :menuselection:`Video --> Take Snapshot`. To record a video from your webcam once you can see everything looks good select :menuselection:`Playback --> Record`. 
+
 Customizing
 -----------
 To view your preferences of VLC press :kbd:`control +P` or :menuselection:`Tools --> Preferences`. To change how VLC looks and what buttons it has use the :guilabel:`Interface` tab. To choose to use a custom skin for VLC press the :guilabel:`Use custom skin` radio button and then press :guilabel:`Choose` to find your custom skin. To toggle showing buttons for pausing, changing tracks and the volume control check/uncheck the :guilabel:`Show controls in full screen mode` checkbox. To have the video display in its own window uncheck the :guilabel:`Integrate video in interface` checkbox. To start VLC in a minimal view mode check the :guilabel:`Start in minimal view mode` checkbox. To have VLC pause playback when the VLC window is minimized check the :guilabel:`Pause playback when minimized` checkbox. To toggle showing an icon in the system tray check/uncheck the :guilabel:`Show systray icon` checkbox. To change VLC showing a popup when the media changes like when having multiple files in a playlist change the :guilabel:`Show media change popup` menu. The :guilabel:`Force window style` changes the way VLC windows are drawn if you want a custom layout for just VLC. To allow only one window of VLC check the :guilabel:`Allow only one instance` checkbox. If you have only one instance check the :guilabel:`Enqueue items into playlist in one instance mode` checkbox to add new files to play at the end of the playlist.  To have VLC continue playback of files changes change the :guilabel:`Continue playback?` menu and select :menuselection:`Always` to always playback or ask to ask for playback.

source/3/3.1/3.1.1/htop.rst

@@ -42,7 +42,7 @@ To change what columns end up showing select :guilabel:`Columns` on the setup me
 
 Version
 -------
-Lubuntu ships with version 3.3.0 of htop. 
+Lubuntu ships with version 3.4.0 of htop. 
 
 How to launch
 -------------