lxqt session advanced

CONTRIBUTING.md

@@ -10,7 +10,7 @@ Before starting, you need a few tools.
  - A modern, Debian-based Linux distribution
   - Debian Buster (10.0) and onwards
   - Ubuntu 20.04 LTS and onwards
-  - A text editor with syntax highlighting and spell checking
+  - A text editor with syntax highlighting, word wrap, and spell checking
   - A screenshot tool
  - The following packages from your Linux distribution's repository:
   - `git`

README.md

@@ -9,7 +9,7 @@ The documentation is powered by [Sphinx](http://www.sphinx-doc.org/en/stable/) a
 Run the following command to install the needed dependencies:
 
 ```bash
-sudo apt install python3-pip python3-sphinx latexmk texlive texlive-formats-extra python3-sphinx-rtd-theme python3-sphinx-bootstrap-theme
+sudo apt install python3-sphinx latexmk texlive texlive-formats-extra python3-sphinx-rtd-theme python3-sphinx-bootstrap-theme
 ```
 
 You can see the options for building the documentation by running `make help`. You can make the html version by running `make html`. You can make a pdf version of the lubuntu manual with `make latexpdf`. If you just want to check for warnings or errors building run `make dummy`.

source/1/1.1/retrieving_the_image.rst

@@ -1,31 +1,18 @@
 Chapter 1.1 Retrieving the image
 =================================
 
-
-
-
-Before you install Lubuntu, you need to retrieve the correct image. Lubuntu supports AMD64 CPU types also known as 64-bit with a new version every six months (supported for nine months), and every two years being a long term support release (supported for three years). Lubuntu 24.04 is a Long Term Support release supported until 2027.
-
-
+Before you install Lubuntu, you need to retrieve the correct image. Lubuntu supports AMD64 CPU types also known as 64-bit with a new version every six months (supported for nine months), and every two years being a long term support release (supported for three years). Lubuntu 24.04 is a Long Term Support release supported until 2027. Lubuntu 25.10 is supported until January 2026.
 
 LTS vs. Regular Releases
 ------------------------
 
-
-
-Lubuntu offers two types of releases. The **Long Term Support** release, or the **LTS**, is the release recommended for most users. It is supported for three years after the release date and does not contain new features. Throughout the course of the cycle, the Ubuntu Kernel Team will deliver **Hardware Enablement** updates, or **HWE** updates, to Lubuntu via Linux kernel updates. Previously, Lubuntu used **LXDE** but since 18.10 it has used the **LXQt**. Lubuntu 20.04 is the First **Long Term Support** release which uses the more modern **LXQt** desktop environment. 
-
-Lubuntu offers two types of releases. The **Long Term Support** release, or the **LTS**, is the release recommended for most users. It is supported for three years after the release date and does not contain new features. Throughout the course of the cycle, the Ubuntu Kernel Team will deliver **Hardware Enablement** updates, or **HWE** updates, to Lubuntu via Linux kernel updates. Previously, Lubuntu used **LXDE** but since 18.10 it has used **LXQt**. Lubuntu 20.04 is the First **Long Term Support** release which uses the more modern **LXQt** desktop environment. 
-
 Lubuntu offers two types of releases. The **Long Term Support** release, or the **LTS**, is the release recommended for most users. It is supported for three years after the release date and does not contain new features. Throughout the course of the cycle, the Ubuntu Kernel Team will deliver **Hardware Enablement** updates, or **HWE** updates, to Lubuntu via Linux kernel updates. Previously, Lubuntu used **LXDE** but since 18.10 it has used **LXQt**. Lubuntu 20.04 was the First **Long Term Support** release which uses the more modern **LXQt** desktop environment. 
 
-
-
 For users looking to try new features every six months at the expense of the support cycle length, Lubuntu offers **interim releases**, or **regular releases**. These releases, while they are considered stable, are testing grounds for major, new features which will be rolled into the LTS release. Users of the regular releases are typically enthusiasts and somewhat more experienced users looking for a fresher experience.
 
 **It is extremely important that if you choose this path, you upgrade to each successive regular release shortly after it comes out.** If you are not comfortable doing this, you should consider using the LTS release instead.
 
-About four months after a new LTS release comes and every 6 months thereafter an **LTS Point Release** is realeased to support new hardware and fewer updates to download with the longer support term of an LTS realease. LTS point releases are released every August and Feburary. Each LTS point release is called 24.04.1 is the first point release for the 24.04 point release.
+About four months after a new LTS release comes and every 6 months thereafter an **LTS Point Release** is released to support new hardware and fewer updates to download with the longer support term of an LTS release. LTS point releases are released every August and February. Each LTS point release is called 24.04.1 is the first point release for the 24.04 point release.
 
 Ways to download the image
 ---------------------------
@@ -54,16 +41,13 @@ To verify the image, run this from the command line:
 
 .. code:: 
 
-
- sha256sum lubuntu-24.04.3-desktop-amd64.iso
-
+ sha256sum lubuntu-25.04-desktop-amd64.iso
 
 and then carefully check that the output matches 
 
 .. code::
 
-  d1c502297205db97e2f1195f9e5a1a86c7a9754dfd4758b96f41e384eb233aab *lubuntu-24.04.3-desktop-amd64.iso
-
+  da49827ab8bce6b78214d6fd44c4334a5194e5c87534906e4f272492de4fd14e *lubuntu-25.04-desktop-amd64.iso
 
 Downloading the image via BitTorrent
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -98,9 +82,6 @@ To download the image using zsync run
  
 .. code::
 
-
-
-   zsync https://cdimage.ubuntu.com/lubuntu/releases/24.04.3/release/lubuntu-24.04.3-desktop-amd64.iso.zsync
-
+   zsync https://cdimage.ubuntu.com/lubuntu/releases/25.04/release/lubuntu-25.04-desktop-amd64.iso.zsync
    
 **You have now downloaded the image successfully. Please continue to Chapter 1.2.**

source/1/1.3/installation.rst

@@ -7,14 +7,13 @@ Starting the installer
 
 At the start of the boot process, a GRUB splash screen will be shown. To install select :menuselection:`Try or Install Lubuntu`. If you have a problematic graphics card, select :menuselection:`Lubuntu (safe graphics)` (for example, some NVIDIA cards will need this.) To test your RAM, select :menuselection:`Test memory`.
 
-
 .. image::  grubsplash.png
 
-The next screen will present a choice between :guilabel:`Try Lubuntu`, which will give you a live session to run Lubuntu as you see fit, or run the installer directly with :guilabel:`Install Lubuntu`. Above this there is a field to select which language you want to install in the :guilabel:`Select Your Language` drop down. To get this screen in your language, select one then press the :guilabel:`Confirm` button. If you need more advanced network settings to install Lubuntu than just connecting to Wi-Fi use the :guilabel:`Try Lubuntu` choice. If choose :guilabel:`Install Lubuntu` the installer will start right away and install in your language. At the bottom of your screen if you are connected to the internet automatically like with an ethernet cable it will say :guilabel:`Connected` at the bottom. If you are not connected to the internet at the bottom it will say :guilabel:`Not Connected`.
+The next screen will present a choice between :guilabel:`Try Lubuntu`, which will give you a live session to run Lubuntu as you see fit, or run the installer directly with :guilabel:`Install Lubuntu`. Above this there is a field to select which language you want to install in the :guilabel:`Select Your Language` drop down. To get this screen in your language, select one then press the :guilabel:`Confirm` button. If you need more advanced network settings to install Lubuntu than just connecting to Wi-Fi use the :guilabel:`Try Lubuntu` choice. If choose :guilabel:`Install Lubuntu` the installer will start right away and install in your language. At the bottom of your screen if you are connected to the internet automatically like with an Ethernet cable it will say :guilabel:`Connected` at the bottom. If you are not connected to the internet at the bottom it will say :guilabel:`Not Connected`.
 
 .. image:: installer-prompt.png
 
-Once you have booted into the live session, feel free to explore Lubuntu and make sure all your hardware works. Once you are ready to install Lubuntu, double click the icon in the top-left corner of the desktop :guilabel:`Install Lubuntu 24.04 LTS` or :menuselection:`System Tools --> Install Lubuntu 24.04 LTS`.
+Once you have booted into the live session, feel free to explore Lubuntu and make sure all your hardware works. Once you are ready to install Lubuntu, double click the icon in the top-left corner of the desktop :guilabel:`Install Lubuntu 25.10` or :menuselection:`System Tools --> Install Lubuntu 25.10`.
 
 .. image:: live_session.png
 
@@ -24,7 +23,7 @@ You will be taken to the Lubuntu installer Welcome screen. You can change the in
 .. image:: welcome_installer.png
 
 
-Selecting Your location
+Selecting Your Location
 -----------------------
 
 The next screen will show you a map of the world where you can choose your location. Your location will be used to set your time zone and download server. To see what region you have chosen use the :guilabel:`Region` drop down menu. The :guilabel:`Zone` field should have a major city with the same time as you. If you want to get to the your time zone manually faster you can type in the name of a big city in the same time zone. Towards the bottom you can to change your system language by pressing the upper :guilabel:`Change` button. To change the how numbers and dates appear on your system press the lower :guilabel:`Change` button. To switch certain keys on your keyboard use the :guilabel:`Switch Keyboard` drop down. To move to the next step once again press the :guilabel:`Next` button. To move back to selecting your language to change your language press the :guilabel:`Back` button.
@@ -43,13 +42,13 @@ Customize
 
 Next will bring a choice of what applications to install, additional third party drivers, or to install updates with the installation. To choose to install all applications and the list of the third party applications choose :guilabel:`Full Installation`. To choose the normal applications included in Lubuntu select the :guilabel:`Normal Installation` button. To choose a minimal installation of just the desktop environment select the :guilabel:`Minimal Installation` button. To install updates while installing check the :guilabel:`Download and install updates following installation` checkbox. To install third party and maybe proprietary drivers check the :guilabel:`Install third-party software for graphics, WiFi hardware, and additional media formats` checkbox.
 
-Pick which particular additional applications you wish to install there are checkboxes for each program under :guilabel:`Install additional third party packages`. To install Element for encrypted Matrix chat check the :guilabel:`Element` checkbox. To install the Thunderbird email and calendering client check the :guilabel:`Thunderbird checkbox`. To install virt-manager to manage running virtual machines on Lubuntu check the :guilabel:`Virtual Machine Manager` checkbox. To make digital art check the checkbox for :guilabel:`Krita`.
+Pick which particular additional applications you wish to install there are checkboxes for each program under :guilabel:`Install additional third party packages`. To install Element for encrypted Matrix chat check the :guilabel:`Element` checkbox. To install the Thunderbird email and calendering client check the :guilabel:`Thunderbird checkbox`. To install the Virtual Machine Manager for running virtual machines check the :guilabel:`Virtual Machine Manager` checkbox. To install Krita to make digital art check the :guilabel:`Krita` checkbox.
 
 To go to the next part of installation press the :guilabel:`Next` button. To go to selecting your keyboard again press the :guilabel:`Back` button.
 
 .. image:: customizing.png
 
-Setting up partitions
+Setting Up Partitions
 ---------------------
 
 If all you want is Lubuntu on your machine, you can select the :guilabel:`Erase disk` button. This will format the disk and **delete all data on the disk**,  which is why having your data backed up before this point is extremely important. If you choose to do this you can continue on to user setup. To change the storage device to install Lubuntu on use the :guilabel:`Select Storage device` drop down menu. To see whether you are installing in uefi or bios mode is shown in the top left corner of this window. To choose to use a swap file under :guilabel:`Erase disk` keep :menuselection:`Swap to file` or to not use swap choose :menuselection:`No Swap`. To choose which filesystem to use the drop down on the right to choose which filesystem you want to use. If you want to encrypt your drive press the :guilabel:`Encrypt system` checkbox and then you will need to enter the encryption passphrase twice to make sure you have it typed in correctly. It is strongly advised to write down this passphrase and keep it somewhere safe. 
@@ -72,7 +71,7 @@ To move back to Selecting your keyboard layout press the :guilabel:`Back` button
 
 User Setup
 ----------
-The user setup section creates a user profile, consisting of typing your name into the :guilabel:`What is your name?` field. Next type your username in the :guilabel:`What name do you want to use to log in?`. Put what you want your hostname of your computer to be in the :guilabel:`what is the name of this computer?` field. The last thing you need to enter is your password in the :guilabel:`Choose a password to keep your account safe`.  Enter your password twice to make sure you have not mistyped it. If a name can actually be used as a username or hostname a green checkmark will appear to the right of it if you cannot a red x will appear. Pressing the :guilabel:`Next` button will give you a summary screen, showing you the settings before the install begins. Once you have checked the summary click the :guilabel:`Install` button to begin the installation. 
+The user setup section creates a user profile, consisting of typing your name into the :guilabel:`What is your name?` field. Next type your username in the :guilabel:`What name do you want to use to log in?`. Put what you want your hostname of your computer to be in the :guilabel:`what is the name of this computer?` field. The last thing you need to enter is your password in the :guilabel:`Choose a password to keep your account safe`. Enter your password twice to make sure you have not mistyped it. To the right of your password will have an x if your passwords don't match. If you have a weak password to the right will have an orange triangle saying why your password is weak. Passwords less than 8 characters, containing a sequence like 1234, or based off a simple dictionary word like testing1 are considered weak. If a name can actually be used as a username or hostname a green checkmark will appear to the right of it if you cannot a red x will appear. Pressing the :guilabel:`Next` button will give you a summary screen, showing you the settings before the install begins. Once you have checked the summary click the :guilabel:`Install` button to begin the installation. 
 
 .. image::  user_setup.png
 
@@ -82,7 +81,7 @@ The summary screen shows what settings will be installed and you can double chec
 
 The Install
 -----------
-The Lubuntu installer provides some useful information while the installer is running. On the bottom of the window is a progress bar. On the right end of the progress bar is the percentage of the installation complete. To see command line output of the install press the :guilabel:`Magnifying glass` button. Once Lubuntu is installed you have a checkbox :guilabel:`Reboot now` after your Lubuntu is installed and is now finished. There is a slideshow while you install and to move to the next slide left click and to move to the previous slide right click.
+The Lubuntu installer provides some useful information while the installer is running. On the bottom of the window is a progress bar. On the right end of the progress bar is the percentage of the installation complete. To see command line output of the install press the :guilabel:`Toggle log` button. Once Lubuntu is installed you have a checkbox :guilabel:`Reboot now` after your Lubuntu is installed and is now finished. There is a slideshow while you install and to move to the next slide left click and to move to the previous slide right click.
 
 .. image:: installer_screen.png
 
@@ -91,14 +90,25 @@ Rebooting into the finished install
 
 After the install is finished you will need to reboot your system into your new install. If you want to continue using the live system but end the installer uncheck the :guilabel:`Reboot now` checkbox. To close the installer press the :guilabel:`Done` button. After this your computer will reboot and you should remove your install media.
 
-Manual partitioning
+Install Alongside
+-----------------
+To choose to shrink your current partition to install Lubuntu alongside a currently existing install so you can boot into both of them select :guilabel:`Install alongside`. The :guilabel:`Current` bar graph shows how much space is currently taken up by a partition. The :guilabel:`After` section shows how much space will be used by both installs.  To change how much space each partition will end up using slide the center back and forth to distribute space between both installs. If you want to encrypt your install check the :guilabel:`Encrypt system` checkbox.
+
+
+.. image:: install_alongside.png
+
+Replace a Partition
+-------------------
+To replace a partition select :guilabel:`Replace a partition` on the :guilabel:`Partitions` tab. To select which filesystem to install Lubuntu on choose on the drop down under :guilabel:`Replace a partition`. To select which drive to install on choose in the :guilabel:`Select storage device` menu. To encrypt your Lubuntu install check the :guilabel:`Encrypt system` checkbox. To look at your current layout of partitions you have look at the :guilabel:`Current` bar graph.  To see what each partition is listed below the graph. To select which partition to replace left click on the partition on the :guilabel:`Current` graph. To see the what partitions will be used after the install read the :guilabel:`After` field. To see the size and filesystem of all partitions view the :guilabel:`After` bar graph. To see where Lubuntu will boot from is also on the bottom. To continue installing press :guilabel:`Next`.
+
+.. image:: replacing_partition.png
+
+Manual Partitioning
 -----------------------
 .. Warning::
-
-
    Trying to use nonlinux filesystems such as NTFS or FAT as your root filesystem will result in a broken system.
 
-If you wish to manual set up partitions, as an advanced option you will have to choose which file-system you want. A file-system controls how your files are accessed at lower levels on the disk. If you are booting your computer in UEFI mode a more modern firmware compared to BIOS you will need to create an EFI system partition (see `efi system partition Wikipedia <https://en.wikipedia.org/wiki/EFI_System_partition>`_ for more detail). To create this partition you will need a FAT32 file-system with the ESP flag to be mounted at /boot/efi/ under the mount point. You will also need a root (/) file-system, several file-systems included for Lubuntu are Ext4, XFS, and Btrfs. Lubuntu 22.04 has bug with installing BTRFS and `This guide on Lubuntu discourse <https://discourse.lubuntu.me/t/getting-lubuntu-22-04-to-install-with-btrfs/3273>`_
+If you wish to manual set up partitions, as an advanced option you will have to choose which file-system you want. A file-system controls how your files are accessed at lower levels on the disk. If you are booting your computer in UEFI mode a more modern firmware compared to BIOS you will need to create an EFI system partition (see `efi system partition Wikipedia <https://en.wikipedia.org/wiki/EFI_System_partition>`_ for more detail). To create this partition you will need a FAT32 file-system with the ESP flag to be mounted at /boot/efi/ under the mount point. You will also need a root (/) file-system, several file-systems included for Lubuntu are Ext4, XFS, and Btrfs. Lubuntu 22.04 has bug with installing BTRFS and `This guide on Lubuntu discourse <https://discourse.lubuntu.me/t/getting-lubuntu-22-04-to-install-with-btrfs/3273/>`_
 
 .. image:: manpartitioning.png
 
@@ -113,7 +123,9 @@ You can create partition by clicking the :guilabel:`Create` button which will br
 
 .. image::  manpartition-create.png
 
-To go back on all your changes to the previous state press the :guilabel:`Revert All Changes` button. To change what device your computer will boot off of you will need to use the :guilabel:`Install boot loader on` drop down menu to select which disc to boot off of. 
+Lubuntu's bootloader grub does not support creating an encrypted / partition without a separate unencrypted /boot partition. If you create a separate /home partition will be where you save all your user documents photos and videos so make sure if you create one it has enough space for your personal files. All partitions created do not be on the same drive so you can for example put /home on its own drive to give you lots of space and then put / where all of your system and programs will be launched from. A good example of a sensible way to use manual partitioning is if you have a solid state disk and a hard drive in a computer, put the / partition on the solid state drive for faster program launches and /home on the hard drive for more space for your files. 
+
+To go back on all your changes to the previous state press the :guilabel:`Revert All Changes` button in the top right. To change what device your computer will boot off of you will need to use the :guilabel:`Install boot loader on` drop down menu to select which disc to boot off of. 
 
 In the center of the manual partitioning window shows you what name of the partition is. What type of filesystem is displayed in the :guilabel:`File System` column. To see where your partition is mounted are shown in the :guilabel:`Mount Point` column. The size of the system is shown in the :guilabel:`Size` Column.
 
@@ -123,7 +135,7 @@ The top of the manual partitioning window shows a visual bar showing size of you
 OEM Installs
 ------------
 
-To install Lubuntu in an OEM mode for distributing to someone else on the grub boot splash select :menuselection:`OEM install (for manufacturers)` or from the panel menu :menuselection:`System Tools --> Install Lubuntu 24.04 LTS (OEM mode)`. Then you will be asked if you are sure you want to install in OEM mode and to actually install in OEM mode press the :guilabel:`Yes` button. Then the installer will say have a welcome screen that will say it is in OEM mode will show up. To change what language to use for installation use the drop down bar under :guilabel:`OEM installation mode`. To move to the next step of installation press the :guilabel:`Next` button.
+To install Lubuntu in an OEM mode for distributing to someone else on the grub boot splash select :menuselection:`OEM install (for manufacturers)` or from the panel menu :menuselection:`System Tools --> Install Lubuntu 24.10 (OEM mode)`. Then you will be asked if you are sure you want to install in OEM mode and to actually install in OEM mode press the :guilabel:`Yes` button. Then the installer will say have a welcome screen that will say it is in OEM mode will show up. To change what language to use for installation use the drop down bar under :guilabel:`OEM installation mode`. To move to the next step of installation press the :guilabel:`Next` button.
 
 .. image:: oem-install-welcome.png
 
@@ -137,7 +149,7 @@ Then a summary screen shows what settings are for your users. To actually begin
 Oem User Setup
 --------------
 
-To setup your user setup for an OEM preinstalled system :menuselection:`System Tools ---> Finish OEM prepartion`. Then you will be asked if you want to finish OEM setup and then a wizard will be run next boot. Then press :guilabel:`Yes` to confirm this. Then you will need to reboot to run the user setup.
+To setup your user setup for an OEM preinstalled system :menuselection:`System Tools --> Finish OEM preparation`. Then you will be asked if you want to finish OEM setup and then a wizard will be run next boot. Then press :guilabel:`Yes` to confirm this. Then you will need to reboot to run the user setup.
 
 The first section of user setup will ask you what language to continue in at the very bottom. To go to the next part of Lubuntu setup press the :guilabel:`Next` button.
 

source/2/2.1/2.1.1/firefox.rst

@@ -26,10 +26,8 @@ Usage
 ------
 To open a new tab in Firefox press the :guilabel:`+` button on the right of the tab bar, right click the tab bar :menuselection:`New tab`, or press :kbd:`Control + t`. To close a tab press the button with an :guilabel:`x` on the right side of the tab or press :kbd:`Control +W`. To Open a new window in browsing press :kbd:`Control +N`. To view your browsing history press the hamburger menu :menuselection:`Library --> History` or press :kbd:`Control +H`. When you have the history sidebar you can search through your history where it says :guilabel:`Search History`. To change how to sort your history click the :guilabel:`View` label and select how you want to search your history. To view your downloaded files press the button that looks like three stacked books with a fourth leaning over :menuselection:`--> Downloads`.
 
-
 To click on a hyperlink left click on it. To open a link in a new tab right click on the link :menuselection:`Open Link in New Tab`. To open a link in a new window right click and select :menuselection:`Open Link in New Window`. To open a link in a private session right click :menuselection:`Open Link in New Private Window`. To copy the link you have right click and select :menuselection:`Copy Link`.
 
-
 To go back to a previous page in Firefox press the button pointing to the left or press :kbd:`Alt + Left arrow`. To open the page you were previously browsing in a new tab middle click the back button. To go forward to a page you have visited before but have now gone back from press the button with the arrow pointing to the right or :kbd:`Alt + Right arrow`. Middle click on the forward button to open the page you went back from in a new tab. To download a file directly to your local disk right click :menuselection:`Save Link As` file as and then you will get a dialog box to show where to save it. To save an image to your computer right click the image and select :menuselection:`Save Image As`. 
 
 When you are downloading something a circle will show up showing progress of the download. The more shown in blue the more of the file has been downloaded. To view what you are downloading press the left click the circled graph showing what you have downloaded. Then you can see how much data has been downloaded, time remaining to download, and how big a file it is and a bar graph of the status of different files downloading. To pause downloading a file right click and select :menuselection:`Pause`. To then continue downloading again right click and select :menuselection:`Resume`. To cancel the download press the :guilabel:`X` button on the right hand side of this menu. When the download if finished it will show you a blue arrow pointing down that is underlined. After you have downloaded something it will return to gray. 
@@ -42,7 +40,7 @@ To open PCManFM-Qt in the folder where you downloaded things right click and sel
 
 To have a list of all of your tabs press the downward pointing arrowhead button. To close a tab from this list press the :guilabel:`x` button. To restore your session when first opening a Firefox press :guilabel:`Restore Session` or press the downward pointing arrow and select :guilabel:`Restore Session`. To switch the view of your tabs if you have more than on the screen press the right ward pointed arrowhead to move the visible part of the tab bar to the right. To move the visible part of the tab bar to the left press the leftward pointed arrowhead. To move a tab to where you want it left click the tab and drag it to the position you want the tab. To search through all your tabs you can click on the downward pointed arrow and select :menuselection:`Search Tabs`. 
 
-To view extensions to Firefox press the :guilabel:`puzzle piece` button in the top right corner, press :kbd:`Control + shift +A`, :menuselection:`Hamburger menu --> Add on and themes`, or type about:addons into the address bar.
+To view extensions to Firefox press the :guilabel:`puzzle piece` button in the top right corner, press :kbd:`Control + shift +A`, :menuselection:`Hamburger menu --> Add on and themes`, or type about:addons into the address bar. To view extensions use the :guilabel:`Extensions` tab. To  change your themes  on Firefox left click the :guilabel:`Themes` tab. To have settings for plugins left click on the :guilabel:`Plugins` tab. To change settins   with your langauges use the :guilabel:`Languages` tab.
 
 To scroll down using the keyboard press :kbd:`Page Down`. To scroll up the page with the keyboard press :kbd:`Page Up`. To scroll all the way back up to the top press the :kbd:`Home` key. To move all the way to the bottom of the page press the :kbd:`End` key.
 
@@ -58,7 +56,7 @@ In the top left hand corner there is a :guilabel:`Folder` button that on the tab
 
 To copy text in Firefox select it with the mouse and press :kbd:`Control +C` or right click on it and select :menuselection:`Copy`. To paste text into Firefox press :kbd:`Control+ V` or right click  and select :menuselection:`Paste`. To cut text in Firefox select the text and press :kbd:`Control+X` or right click and select :menuselection:`Cut`. To select all of the text on a page press :kbd:`Control+ A` or right click and select :menuselection:`Select All`.
 
-To view info on your webpage press :kbd:`Control+ I`. To take a screenshot of a webpage right click and select :menuselection:`Take Screenshot`. Then select the part of the webpage you want by left clicking and dragging to select which part of the webpage to take a picture of. To save your screenshot press the :guilabel:`Download` button. To copy the screenshot to a clipboard press the :guilabel:`Copy` button. To cancel taking the screenshot press the :guilabel:`Cancel` button or press :kbd:`Escape`. To take a screenshot of the whole webpage press the :guilabel:`Save full page` button. To save the visible portion of the page press the :guilabel:`Save visible` button.
+To view info on your webpage press :kbd:`Control+ I`. To take a screenshot of a webpage right click and select :menuselection:`Take Screenshot`. Then select the part of the webpage you want by left clicking and dragging to select which part of the webpage to take a picture of. To change the size of the screenshot click on a circle and drag to the desired size. To save your screenshot press the :guilabel:`Download` button. To copy the screenshot to a clipboard press the :guilabel:`Copy` button. To cancel taking the screenshot press the :guilabel:`Cancel` button, the :guilabel:`x` button that appears after selecting an area, or press :kbd:`Escape`. To take a screenshot of the whole webpage press the :guilabel:`Save full page` button. To save the visible portion of the page press the :guilabel:`Save visible` button.
 
 .. image:: screenshot-taking.png
 
@@ -78,6 +76,14 @@ To search for a word in a webpage press :kbd:`Control+F` and then type what you
 
 Firefox offers to save passwords of websites with a popup when you enter in a password and press :guilabel:`Save`. This will have Firefox remember the password so you do not have to remember it. Firefox however stores these in your browser and you can access them from the three bars :menuselection:`Passwords`. To search what sites you have saved logins for type in the :guilabel:`Search Logins` bar at the top. On the left hand side bar lists each saved login for each site and to get to one login left click on the site. Once on a login click the :guilabel:`Copy` button to copy the password to login to a site. To view a password of what you have saved click the :guilabel:`eyeball` button which will show your saved passwords. To hide your password again press the :guilabel:`crossed out eyeball`. To stop storing a login in Firefox press the :guilabel:`Remove` button. To change a saved password you can press the :guilabel:`Edit` button.
 
+IF you have trouble reading a webpage you may want to use reader view. To enter reader view left click on the :guilabel:`paper with lines on it` button to the right of the address bar. This will take out background of the page and sidebars with less things on the page. To Exit reader view press the :guilabel:`x` button to the left of the main text of the page or press the :guilabel:`paper with lines on it` button on the right of the address bar again. 
+
+To change settings with your text in reader view press the :guilabel:`Aa` button on the left sidebar. To change increase text size press the :guilabel:`+` button and conversely press the :guilabel:`-` button. To choose what kind of font to read use the :guilabel:`Font` menu. To choose which weight of font to use use the :guilabel:`Font weight` menu. To change how much width of the screen to take up layout use the :guilabel:`Content width` slider. To change the space between lines change the :guilabel:`Line spacing` slider.
+
+To choose a theme for how to view text in reader view use the :guilabel:`Theme` on the sidebar to the left. The default subtab lets you choose either an :guilabel:`Auto`, :guilabel:`Dark`, :guilabel:`Contrast`, :guilabel:`Light`, :guilabel:`Sepia`, or :guilabel:`Gray` theme by left clicking on the theme. To use a custom theme use the :guilabel:`Custom`tab. To choose the color of your text left click on the :guilabel:`Text` box. To change the background color of your text left click the :guilabel:`Background` menu. To choose which color for unvisited links use the :guilabel:`Unvisited links` menu. To change the color of visited links change the :guilabel:`Visited links` menu. To change what color to highlight text to be read aloud :guilabel:`Highlighter for read aloud` menu. To reset your custom theme to default press :guilabel:`Reset defaults`.
+
+To read text on your webpage aloud use the :guilabel:`read aloud` tab on the left sidebar. To start reading text aloud press the :guilabel:`Play` button. To repeat what is being read press the :guilabel:`back `button with the left pointing arrow. To skip to the next paragraph press the right pointing arrowing or :guilabel:`forward` button. To slow down how fast text is read move the slider towards the :guilabel:`tortoise`. To speed up the rate of the text being read move it towards the :guilabel:`rabbit`. To change which voice you to read text in use the :guilabel:`voice` drop down menu.
+
 Customizing
 -----------
 
@@ -115,9 +121,7 @@ To change how Firefox deals with websites wanting permissions for Location, Came
 
 Version
 ----------
-
-Lubuntu currently ships with the latest version of Firefox, Firefox 123.
-
+Lubuntu currently ships with the latest version of Firefox, Firefox 139.
 
 
 How to Launch
@@ -135,7 +139,5 @@ from the terminal to run Firefox. You can also have Firefox directly open this m
 
    firefox https://manual.lubuntu.me
    
-
 You can also launch Firefox from the quick launch by left clicking on the Firefox icon. The icon for Firefox looks like a globe with a red fox circling around it. Yet another way to launch Firefox is to press the browser button on your keyboard.
 
-

source/2/2.1/2.1.3/Quassel_IRC.rst

@@ -1,116 +0,0 @@
-Chapter 2.1.3 Quassel IRC
-=========================
-
-Quassel IRC is Lubuntu's default modern, cross-platform, distributed chat client. Quassel aims to bring a pleasurable, comfortable chatting experience to all major platforms (including Linux®, Windows®, and MacOS® as well as Android smartphones), making communication with your peers not only convenient, but also ubiquitously available. 
-
-Features:
- - Remember Channels, Servers, and queries
- - SASL authentication
- - Notifications, including sounds
- - Aliases
- - Ignore lists
-
-Usage
-------
-To chat on IRC you need to connect to a server and join a channel. This can be done with the join button or by typing "/join [channel]". To send a query or private message directly to someone type "/query" username or right click on the user list and select :menuselection:`Start Query`. After starting a query you can get back to this conversation by viewing the user with a human shaped icon on the left side pane to continue the conversation later. If you wish to view older messages just scroll up with the mousewheel or the scrollbar to the right. Scroll down to view newer messages.
-
-To see all the nicknames of someone in a channel are located in a sidebar labeled :guilabel:`Nicks`. The lists of all channels you are in is labeled :guilabel:`All chats`. To switch between different channels left click on the channel name.
-
-.. image:: quasselwizard.png
-
-To add the Lubuntu IRC chat network click :menuselection:`File --> Networks --> Configure_Networks`. To add a new network click the :guilabel:`+Add` button. To connect to a common public network :guilabel:`Use preset` dropdown, select :guilabel:`Lubuntu IRC` or any other server you want to join and then press :guilabel:`OK`. To change a name of an IRC network press the :guilabel:`Rename` button type the new name in and press :guilabel:`OK`.
-
-
-To join a channel simple type :kbd:`/join 1` (where 1 is the channel name), right click the network and select :menuselection:`Join Channel` or use the :guilabel:`Join` button. To leave a channel right click on the channel name on the right hand side and select :menuselection:`Part` from the context menu or type :kbd:`/part channelname`. If you want to join the channel again after leaving it right click on the channel and select :menuselection:`Join`. To have your chat be hidden until you rejoin it again right click on the channel and select :menuselection:`Hide Chats(s) Temporarily`. To hide the chat forever right click on the channel and select :menuselection:`Hide Chats(s) Permanently`.
-
-To hide all people joining or leaving a chat right click on the channel list :menuselection:`Hide Events --> Joins/Parts/Quits`. To only hide people joining right click on the list of channel list :menuselection:`Hide Events --> Joins`. To hide people parting the channel right click on the channel list :menuselection:`Hide Events --> Parts`. To hide people quitting the channel right click on the channel list :menuselection:`Hide Events --> Quits`. To hide people changing their nickname :menuselection:`Hide Events --> Name Changes`. To hide when someone changes the topic of a channel :menuselection:`Hide Events --> Topic Changes`. To hide people changing the mode of a channel right click on the list of channels :menuselection:`Hide Events --> Mode Changes`. To hide when Quassel tells you it is tomorrow right click on the list of channels :menuselection:`Events --> Day Changes`. However while hiding events may result in less busy traffic it can leave you trying to communicate with people no longer on IRC. To view these events again simply uncheck the checkbox for that event.
-
-
-.. image:: channel-list-context.png
-
-If you want to disconnect from a particular server if you have connected to it right click on the server name and select :menuselection:`Disconnect`. If you are disconnected from a server and want to connect to it right click on it and select :menuselection:`Connect`. To collapse a servers list of channels you can left click on the arrow next to the server name and click it again to uncollapse the list of channels. To change your settings for a server right click on a server name and select :menuselection:`Configure`.
-
-To toggle showing checkboxes in front of each chat right click on a server or channel and check the checkbox for :menuselection:`Show/Hide Chats` to bring a giant list of checkboxes. To hide a chat this way uncheck the checkbox in front of that channel or query. To go back and actually hide some chats right click on the channel or server and unchceck :menuselection:`Show/Hide Chats`.
-
-To state you are taking an action in IRC you can type :kbd:`/me` at the start of you typing to have say \*nick does something. To change your nickname on IRC type :kbd:`/nick newname` to change you name to newname.
-
-To leave all servers and disconnect press the :guilabel:`Disconnect` button in the top toolbar. If you have multiple servers configured to disconnect from one press the downward pointed arrow and select the server you want to disconnect from. To connect to the servers again press the :guilabel:`Connect` button. To connect to a specific server press the downward pointing arrow and select the server you want to connect to.
-
-To switch between multiple channels left click on the channels on the left hand side. If a different channel has has new text in it the channel name will appear in blue. If a channel has a green name a user has joined of left. You also can switch between multiple channels with :kbd:`Alt + up arrow` to move up or :kbd:`Alt + Down arrow` to move down. To go to the next active chat press :kbd:`Alt + Right` or to go to the previous active chat :kbd:`Alt + Left`. To jump to a hot chat press :kbd:`Meta +A`.
-
-In Quassel if someone says your name you are said to be highlighted which in Quassel will make a sound and in a goldenrod color over the line of text with your name on it. The notification will also be shown on your desktop if you are in another window. Also at midnight Quassel will tell you when midnight and the date of the new day.
-
-If you want to enable automatically spell checking your input right click on the input bar and select :menuselection:`Auto Spell Check`. To change your language for spellcheck right click in the input bar and select :menuselection:`Spell Checking language`. If you make a mistake when typing in your input you can press :kbd:`Control+Z` or right click on the input bar and select :menuselection:`Undo`. To redo typing and action press :kbd:`Control+Shift+Z` or :menuselection:`Redo`. To clear the text you input right click the input bar and select :menuselection:`Clear`.
-
-To zoom in to get to your chat more right click and select :menuselection:`Zoom In`. To zoom out in Quassel press :kbd:`Control+-` or right click and select :menuselection:`Zoom Out`. To go back to your original size right click Quassel and select :menuselection:`Actual Size`.
-
-To use SASL authentication to autologin to an account no matter which nickname you want to use :menuselection:`File --> Networks --> Configure networks` to bring up a network configuration dialog. Click on the autoidentify tab and press the checkbox for :guilabel:`Use SASL Authentication`. Enter your username on the IRC network in the :guilabel:`Account` text field. Input your password into the :guilabel:`Password` field so that you know how to auto identify. You can also autoidentify without  using SASL by clicking the Top checkbox. Nickserv is a sensible default for what the services is but it may be different on different servers and put your password in where you autoidentify.
-
-If you want to have settings for automatic reconnecting :menuselection:`File --> Network --> Configure network` and select the :guilabel:`Connection` tab. The checkbox  :guilabel:`Automatic Reconnect` will automatically rejoin chats if you get disconnected. The :guilabel:`Wait` field shows how long to between the retries between each try. The checkbox for :guilabel:`Rejoin all channels after reconnect` lets you rejoin all of your channels without having to manual rejoin each. The :guilabel:`Number of retries` is how many times to retry to connect before stopping. To have an unlimited number of retries click the :guilabel:`Unlimited` number of checkboxes.
-
-.. image:: quassel_irc.png
-
-To ignore a really annoying user you can on the nicks bar on the right hand side right click on the user :menuselection:`Ignore` and then select how to ignore that user. If you realize you want to talk to them again Right click the same username and uncheck the checkbox for the ignore rule you created.
-
-To type a message to an entire channel type into the bar at the bottom and press enter. To complete typing someone's nickname press the :kbd:`Tab` key to complete their name. To paste text into the channel such as a link press :kbd:`Control + V` or right click :menuselection:`Paste`. If you see a hyperlink in chat you can left click on the link to open in your webbrowser or you can copy the link by right clicking on it and :menuselection:`Copy Link Address`.
-
-To close the list of nicknames or channels press the X button or :menuselection:`View --> Nicks`. To reopen the view of nicks :menuselection:`View --> Nicks`. To close the list of all chats press the X button to close a list of all channel and private messages you are in. To reopen it press the :menuselection:`View --> Chat lists --> All chats`.
-
-To make your chat full screen :menuselection:`View --> Full Screen Mode` or :kbd:`Control + Shift +F`. Press the keyboard shortcut or use the menu again to get out of fullscreen. If you want to quit Quassel press :kbd:`Control+Q` or right click on the system tray and select :menuselection:`Quit`.
-
-Customizing
------------
-To change your preferences for Quassel press :kbd:`F7` or :menuselection:`Settings --> Configure Quassel`. To change how Quassel appears use the :guilabel:`Interface` tab. To choose a language for your chat change the :guilabel:`Language` drop down menu. To change the client style for the widget of Quassel choose a widget style from the :guilabel:`Widget style` drop down menu.  To change which icon theme you use for Quassel use the :guilabel:`Fallback icon theme` drop down menu and to have it replace your system icon theme press the :guilabel:`Override system theme`.To toggle showing tray icon check/uncheck the :guilabel:`Show system tray icon` checkbox. If you want to be able to close the Quassel window and still have Quassel running in the system tray to bring it back up check the :guilabel:`Hide to tray on close button`.
-
-.. image:: quassel-pref-interface.png
-
-The :guilabel:`Chat View` tab has settings for colors timestamps and hyperlinks. To change how the time before each message appear check the :guilabel:`Custom timestamp format` checkbox and type hh for hours mm for both minutes or ss for seconds. To toggle showing brackets around everyone's nicknames check the :guilabel:`Show brackets around sender names`. To chose a custom chat window font press the :guilabel:`Custom chat window font` checkbox and then press the :guilabel:`Choose` button to choose a new font. To toggle previews of hyperlinks in chat check/uncheck the :guilabel:`Show previews of webpages on URL hover`. To toggle a red horizontal line when switch chats to show where you left off check/uncheck the :guilabel:`Set marker line automatically when switching chats`. To toggle a red horizontal line to show where left off when you switch windows check/uncheck the :guilabel:`Set marker line automatically when Quassel loses focus` checkbox.
-
-.. image:: quasselpref.png
-
-To change your colors of chat use the :guilabel:`Chat View Colors` tab. To toggle if you want colored text press/unpress the :guilabel:`Allow colored text` checkbox. To change the Colors of your user interface on Quassel check the :guilabel:`Custom Colors` checkbox. Then there are many buttons for each different kind of message which you can press the button that all bring up the specific color for that kind of message. To change the colors of nicknames for different people sending messages check the :guilabel:`Use Sender Coloring` checkbox.
-
-.. image:: chat-view-colors.png 
-
-The :guilabel:`Chat & Nick Lists` has settings for the lists of nickname lists. The :guilabel:`Custom font` checkbox lets you chose a custom font on the lists of nicks and the :guilabel:`Choose` button lets you choose the font you want. The :guilabel:`Display topic in tooltip` shows the channel topic in a tooltip if you move the mouse over it. If you want to be able to switch channels from the mouse wheel check the :guilabel:`Mouse wheel changes selected chat` checkbox. The checkbox :guilabel:`Use Custom Colors` enables the settings for different colors for the different channels. The buttons next to :guilabel:`Standard`, :guilabel:`Inactive`, :guilabel:`Highlight`, or :guilabel:`Other activity` all change what color the channel appears when you are in a list of channels. The :guilabel:`Custom Nick List colors` checkbox lets you change the color of nicks in the list. The :guilabel:`Online` button changes the color of nicks of online users. The :guilabel:`Away` button changes the color of nicks of Away users.  
-
-.. image:: quasel-chat-nick-list.png
-
-The :guilabel:`Input widget` has settings for what you tab to type into channels or private messages. The :guilabel:`Custom Font` checkbox has a thing to activate your own custom font for just input and press the :guilabel:`Choose` button to the font. To have per chat history check the :guilabel:`Enable per chat History` checkbox. The checkbox :guilabel:`Show nick selector` puts a widget in the lower left corner of the window to select different nicks. The checkbox :guilabel:`Show style buttons` shows buttons that style your text hidden in an arrow under an arrow. To enable line wrapping when you type a long line in the input box check the :guilabel:`Line Wrapping`  checkbox. To enable multiple line editing if you have a really long thing you want to type into the IRC channel check the :guilabel:`Multi-Line Editing` checkbox. To edit the largest number of lines shown change the :guilabel:`Show at most X lines` field. To have a scrollbar on inputting text if long enough check the :guilabel:`Enable scrollbars` checkbox. After tab completing someone's nick if you want something after it in the :guilabel:`Completion suffix` field. To add a space after tab completing someone's nick automatically check the :guilabel:`Add space after nick when completing mid-sentence` checkbox.
-
-.. image:: quassel-input-widget.png
-
-To change how Quassel displays the topic of each channel use the :guilabel:`Topic Widget` tab. To use a custom font for your topic check the :guilabel:`Custom font` checkbox and to choose a different font press the :guilabel:`Choose` button. To choose to resize to fit the topic check the :guilabel:`Resize dynamically to fit contents`. To only do this when you hove over the topic check the :guilabel:`On hover only` checkbox.
-
-To view settings for spellcheck use the :guilabel:`Spell Checking` tab. To change the default language for you spell check use the :guilabel:`Default language` drop down menu. To toggle autodetecting language check the :guilabel:`Enable autodetection of language` checkbox. To have Automatic check spelling by default check the :guilabel:`Automatic spell checking enabled by default` checkbox. To have spell check not spellcheck on words starting with capital letters check the :guilabel:`Skip all uppercase words` checkbox. To not spellcheck two words right next to each other check the :guilabel:`Skip run-together words` checkbox. To add words to be the dictionary type in the :guilabel:`Ignored Words` field and then press the :guilabel:`Add` button. To remove a word from your dictionary left click on it and press the :guilabel:`Remove` button.
-
-.. image:: quassel-spellcheck.png 
-
-To have additional settings on highlights like when someone says your name in a channel and it appears in a different color use the :guilabel:`Highlights` tab. To add other words or names to highlight you can press the :guilabel:`Add` button. To change what you want a name or word to be highlighted double click on the :guilabel:`Name` column. To toggle enabling being highlighted by the name check or uncheck the checkbox in the :guilabel:`Enabled` column. To make being highlighted case sensitive check the checkbox in the checkbox in the :guilabel:`CS` column. To use a regular expression for the rule to highlight check the checkbox in the :guilabel:`RegEx` column. To remove this highlight rule press the :guilabel:`Remove` button.
-
-.. image:: quassel-pref-highlights.png
-
-To change your settings Quassel getting and displaying backlogs can be set from :guilabel:`Backlog Fetching` tab. To change modes of backlog fetching to unread messages or a fixed number per chat use the :guilabel:`Backlog request method` drop down menu. If you choose a fixed amount you can change the :guilabel:`Initial backlog amount` to change how many lines you get. If you change the amount unread messages choose the :guilabel:`Limit` to get that many unread messages and then the :guilabel:`Additional Messages` will be shown for context.
-
-To change your settings on your notifications :menuselection:`Settings --> Notifications`. You can also get to this from the :guilabel:`Notifications` tab from the notifications tab. To select which event to change your settings left click on :guilabel:`Private message when focused`, :guilabel:`Highlight`, :guilabel:`Highlight When Focused`, or :guilabel:`Private Message`. If you do not know what highlight is it is when someone mentions your name in a channel. The checkbox :guilabel:`Play a Sound` allows you to to toggle playing a sound in the context. The checkbox :guilabel:`Show message in a popup` creates a popup notification when someone else mentions you. The :guilabel:`Log to file` puts the message in a file. The :guilabel:`Mark taskbar entry` makes the taskbar entry appear highlighted. To change what to do with the tray icon when you are highlighted by Quassel check the :guilabel:`Alert tray icon` and then select what you want to happen to the tray icon.
-
-.. image:: notificationsettings.png  
-
-To change your shortcut :menuselection:`Settings --> Configure Shortcuts`. To see what shortcut does look at the :guilabel:`Action` column in the table. To see what keyboard shortcut to press see the :guilabel:`Shortcut` column. To set a second keyboard shortcut to do something use the :guilabel:`Alternate` column.  To switch to a custom keyboard shortcut left click on the action in the action column press the :guilabel:`Custom` and then press the button to the right and input your keyboard shortcut. To restore your keyboard shortcuts to the defaults press the :guilabel:`Defaults` bottom at the bottom. To not make your changes for keyboard shortcuts press the :guilabel:`Cancel` button. To apply your changes to keyboard shortcuts and close the window press the :guilabel:`OK` button.
-
-.. image:: quassel-shortcut-keys.png
-
-Version
--------
-Lubuntu ships with version 1:0.14.1 of Quassel IRC.
-
-
-How to Launch
--------------
-To launch Quassel from the menu go to :menuselection:`Internet --> Quassel IRC` or type 
-
-.. code:: 
-
- quassel 
- 
-in the terminal. The icon for Quassel looks like a blue circle with a white crescent on it.

source/2/2.1/Internet_Applications.rst

@@ -9,5 +9,4 @@ This chapter documents how to use webbrowsers, IRC, and torrent clients.
 
    2.1.1/firefox
    2.1.2/qtransmission
-   2.1.3/Quassel_IRC
    

source/2/2.2/2.2.1/libreoffice.rst

@@ -23,9 +23,7 @@ from the command line to stop crashes at document recovery.
 
 If you are about to close a document without saving it in LibreOffice a dialog will popup asking :guilabel:`Save changes to document before closing?`. If you do not want to save what you were working on press the :guilabel:`Don't Save` button. To not quit LibreOffice press the :guilabel:`Cancel` button. To Save the document to not lose your work press the :guilabel:`Save` button.
 
-
-On non-English Lubuntu 22.04 installations there is a bug with Libreoffice not being localized see `here <https://discourse.lubuntu.me/t/using-a-language-other-than-english-heres-how-to-get-libreoffice-in-your-language/3269/>`_ for a workaround.
-
+On non-English Lubuntu 22.04 installations there is a bug with LibreOffice not being localized see `here <https://discourse.lubuntu.me/t/using-a-language-other-than-english-heres-how-to-get-libreoffice-in-your-language/3269/>`_ for a workaround.
 
 Screenshot
 ----------
@@ -33,7 +31,7 @@ Screenshot
 
 Version
 -------
-Lubuntu ships with version 7.6.4 of LibreOffice.
+Lubuntu ships with version 25.8.0 of LibreOffice.
 
 How to Launch
 -------------

source/2/2.2/2.2.2/libreoffice_calc.rst

@@ -57,12 +57,16 @@ To format your cells for a number with two decimal places press :kbd:`Control+Sh
 
 To toggle hiding the formula bar :menuselection:`View --> Formula Bar`. To toggle viewing the status bar at the bottom :menuselection:`View --> Status Bar`. To toggle showing the headers that show what each cell is like a4 :menuselection:`View --> View Headers`. To toggle viewing gridlines :menuselection:`View --> View Grid Lines`.
 
-To add a new spreadsheet quickly at the end press the :guilabel:`+` button at the bottom. To switch between different sheets left click on the sheet name at the bottom bar. To delete a sheet you added right click on it :menuselection:` Delete Sheet` and then confirm you are deleting that sheet. To rename a sheet right click on the sheets name and :menuselection:`Rename Sheet`. To see which sheet you are on it will be underlinded at the bottom bar and also say how many sheets along the bottom bar.
+To add a new spreadsheet quickly at the end press the :guilabel:`+` button at the bottom. To switch between different sheets left click on the sheet name at the bottom bar. To delete a sheet you added right click on it :menuselection:` Delete Sheet` and then confirm you are deleting that sheet. To rename a sheet right click on the sheets name and :menuselection:`Rename Sheet`. To see which sheet you are on it will be underlined at the bottom bar and also say how many sheets along the bottom bar.
 
 To insert a comment press :kbd:`Control + Alt +C` or :menuselection:`Insert --> Comment`. To then type the comment in the yellow popup. To toggle viewing your comments :menuselection:`View -->  Comments`.
 
 To quit LibreOffice Calc press :kbd:`Control+Q`.
 
+To  open a  print  preview of your spreadsheet press :kbd:`Control+ Shift + O` or  :menuselection:`File --> Print Preview`. To preview your  spreadsheet in a web browser :menuselection:`File --> Preview in Web Browser`.
+
+To print  your spreadsheet press :kbd:`Control +P` or :menuselection:`File --> Print`. To choose which printer use the :guilabel:`Printer` drop down. To choose how many pages to print use the :guilabel:`Pages` field. To change the number of copies you print change the  :guilabel:`Number of Copies` field. To select a  paper size use the :guilabel:`Paper size` drop  down. To change which orientation for your paper use the :guilabel:`Orientation` drop down. To actually print  press the  :guilabel:`Print`  button.
+
 Charts
 ------
 To get to the dialog of how to insert a chart :menuselection:`Insert --> Chart`. The first selection is to choose a :guilabel:`Column`, :guilabel:`Bar`, :guilabel:`Pie`, :guilabel:`Area`, :guilabel:`Line`, :guilabel:`XY(Scatter)`, :guilabel:`Bubble`, :guilabel:`Net`, :guilabel:`Stock`, or  :guilabel:`Column and Line` chart. To change the subtype of graph click the picture of a chart that looks like the type you want. To switch to the next step of making a graph press the :guilabel:`Next` button.
@@ -79,7 +83,7 @@ The :guilabel:`Chart Elements` tab controls labels and displaying legends on you
 
 Version
 -------
-Lubuntu ships with version 7.6.4 of LibreOffice Calc.
+Lubuntu ships with version 25.8.0 of LibreOffice Calc.
 
 How to Launch
 -------------

source/2/2.2/2.2.3/libreoffice_draw.rst

@@ -63,7 +63,7 @@ To print a drawing press :kbd:`Control+P` or :menuselection:`File --> Print`. To
 
 Version
 -------
-Lubuntu ships with version 7.6.4 of LibreOffice Draw.
+Lubuntu ships with version 25.8.0 of LibreOffice Draw.
 
 How to Launch
 -------------

source/2/2.2/2.2.4/libreoffice_impress.rst

@@ -118,13 +118,13 @@ Slideshows/Presentations
 ------------------------
 To start a slideshow press :kbd:`f5` or the button the looks like a TV with a triangle on it or :menuselection:`Slide Show --> Start from First Slide.` To start a slideshow from the current slide press :kbd:`Shift + f5` or :menuselection:`Slide Show --> Start from current slide`. To exit the slideshow press :kbd:`escape`. To get to the next slide of the slideshow  left click or press the :kbd:`right arrow key`. to get to a previous slide in presentation mode press the :kbd:`left arrow key` or right click previous. To move back to your first slide press the :kbd:`Home` key. To move to your last slide press the :kbd:`End` key.
 
-To bring up custom settings for your settings :menuselection:`Slide Show --> Slide Show Settings`. To change the presentation to in a window press the :guilabel:`In a window` button. To have the slideshow or presentation repeat afterwards press the :guilabel:`Loop and repeat after:`. To switch back to the default of having your presentation be fullscreen press the :guilabel:`Full screen` button. To change options on your presentation are under the :guilabel:`Options` heading. To toggle showing the mouse pointer check/uncheck the :guilabel:`Mouse pointer visible` checkbox. To toggle allowing animations check/uncheck the :guilabel:`Animations allowed` checkbox. To toggle changing slides by clicking with the mouse check/uncheck the :guilabel:`Change slides by clicking on background` checkbox. To toggle the presentation always on top check/uncheck the :guilabel:`Presentation always on top` checkbox. To change which screen or projector impress is presenting to change the :guilabel:`Presentation display` field.
+To bring up custom settings for your settings :menuselection:`Slide Show --> Slide Show Settings`. To change the presentation to in a window press the :guilabel:`In a window` button. To have the slideshow or presentation repeat afterwards press the :guilabel:`Loop and repeat after:`. To switch back to the default of having your presentation be fullscreen press the :guilabel:`Full screen` button. To change options on your presentation are under the :guilabel:`Options` heading. To toggle showing the mouse pointer check/uncheck the :guilabel:`Mouse pointer visible` checkbox. To toggle allowing animations check/uncheck the :guilabel:`Animations allowed` checkbox. To toggle changing slides by clicking with the mouse check/uncheck the :guilabel:`Change slides by clicking on background` checkbox. To toggle the presentation always on top check/uncheck the :guilabel:`Presentation always on top` checkbox. To change which screen or projector impress is presenting to change the :guilabel:`Presentation display` field. To choose what to have either fullscreen, windowed or none at all use the :guilabel:`Presenter console` drop down. 
   
 .. image:: slideshowprop.png
 
 Version
 -------
- Lubuntu ships with version 7.6.4 of LibreOffice Impress.
+ Lubuntu ships with version 25.8.0 of LibreOffice Impress.
 
 How To Launch
 -------------

source/2/2.2/2.2.5/libreoffice_math.rst

@@ -31,7 +31,7 @@ To quit LibreOffice Math press :kbd:`Control+Q`.
 
 Version
 -------
-Lubuntu ships with Version 7.6.4 of LibreOffice Math.
+Lubuntu ships with Version 25.8.0 of LibreOffice Math.
 
 How to Launch
 -------------

source/2/2.2/2.2.6/libreoffice_writer.rst

@@ -46,6 +46,8 @@ To check the spelling of your document press the ABC button with a checkmark, fr
 
 .. image:: lowriter-spellcheck.png
 
+To preview your document in a  web browser :menuselection:` File --> Preview in Web Browser`.
+
 To view how your document looks before printing it :menuselection:`File --> Print preview` or :kbd:`Control +Shift +O`. To get back to editing your document press the same thing again or click the close preview button. After you are done writing your document you can press the button that looks like a printer to print, press :kbd:`control+ p` or :menuselection:`File --> Print`. To toggle the preview on or off check/uncheck the :guilabel:`Preview` checkbox. To the left of the print dialog will have a preview on the left hand side. Below the preview there is a range of different pages showing which page you are previewing and how many pages the document you are printing is showing. To select which printer to use use the :guilabel:`Printer` drop down menu. To choose which pages to print there are buttons under :guilabel:`Range and Copies` heading.  To change which side to print on change the :guilabel:`Paper sides` field. To change how many copies you are printing change the :guilabel:`Number of copies` field. To print in reverse order check the :guilabel:`Print in reverse order` checkbox. To change what paper size you are printing change the :guilabel:`Paper size` field. To change which direction the words are printed on the paper use the :guilabel:`Orientation` field. To change how many pages per sheet you print use the :guilabel:`Pages per sheet` field. To which order the pages are printed change the :guilabel:`Order` field. To preview which order the different pages are ordered to the right see the number of the page on the screen towards the bottom right of the print dialog. To draw a border around multiple pages check the :guilabel:`Draw a border around each page` checkbox.
 
 .. image:: lowriter-print.png
@@ -144,7 +146,7 @@ To see statistics on your document use the :guilabel:`Statistics` tab. To see ho
 
 Version
 -------
-Lubuntu ships with LibreOffice Writer version 7.6.4
+Lubuntu ships with LibreOffice Writer version 25.8.0
 
 How to Launch
 -------------

source/2/2.2/2.2.7/Okular.rst

@@ -1,80 +0,0 @@
-Chapter 2.2.7 Okular
-====================
-Okular is the PDF viewer for Lubuntu 24.04 
-
-Usage
------
-To move the area shown on the screen down press :kbd:`Down arrow` and conversely to move it up use :kbd:`Up arrow`. You can also use the scrollwheel on your mouse to easily move up and down. To go to the next page press :kbd:`right arrow`, :menuselection:`Go --> Next Page`, or press press the downward pointing arrow on the toolbar. To go to the previous page press :kbd:`Up arrow`, :menuselection:`Go --> Previous Page`, or the upward pointing arrow on the toolbar. To see what page you are in is in a box between the button for next and previous page on the toolbar. To the right of this box it shows what page this is :guilabel:`of` the total number of pages of the document. To switch to a particular page type in the box in the center of the toolbar, press :kbd:`control +G`, or :menuselection:`Go --> Go to Page`.
-
-When you first open Okular you can open a file with the :guilabel:`Open Document` button, :menuselection:`File --> Open`, or press :kbd:`Control + O`. If you have a recently opened document it will appear on the right under :guilabel:`Recent Documents` on first opening Okular or :menuselection:`File --> Open Recent`. To clear your recent documents click the :guilabel:`Forget All` button when you first open Okular or :menuselection:`File --> Clear List`. Open Recent -->  To reload your file if something is changed press :kbd:`F5` or :menuselection:`File --> Reload`. To save a PDF :menuselection:`File --> Save` or press :kbd:`Control +S`. To save a file with a separate name :menuselection:`File --> Save As` or press :kbd:`Control + Shift +S`. To print your document press :kbd:`Control + P` or :menuselection:`File --> Print`.  To see info on your file :menuselection:`File --> Properties` or press :kbd:`Alt + Enter`.
-
-.. image:: Okular-first-open.png
-
-To zoom out press the :guilabel:`-` button on the toolbar, press :kbd:`Control + -`, or :menuselection:`View --> Zoom Out`. To zoom in press the :guilabel:`+` button on the toolbar, press :kbd:`Control + +`, or :menuselection:`View --> Zoom in`. To zoom to have the page zoom to have the width fill the whole window :menuselection:` View --> Fit width` or select :menuselection:`Fit Width` next to the :guilabel:`+` and :guilabel:`-`. To zoom to see a full page :menuselection:`View --> Fit Page` or select :menuselection:`Fit Page` next to the :guilabel:`+` and :guilabel:`-` button. To zoom to 100%  :menuselection:`View --> Zoom to 100%`, press :kbd:`Control +0`, or select :menuselection:`100%` on the bar next to the :guilabel:`+` and :guilabel:`-` buttons.
-
-To view pages facing each other like an open book select from :guilabel:`View Mode` :menuselection:`Facing Pages` or :menuselection:`View --> View Mode --> Facing Pages`. To see an open book view with the first page centered select :menuselection:`Facing Pages(center first page)` from :guilabel:`View Mode` or :menuselection:`View --> View Mode --> Facing Pages(center first page)`. To view multiple pages at once select :menuselection:`Overview` from :guilabel:`View Mode` or :menuselection:`View --> View Mode --> Overview`. To switch back to viewing one page select :menuselection:`Single Page` from :guilabel:`View Mode` or :menuselection:`View --> View Mode --> Single Page`. To choose to only view whole pages at once and not scroll to the top and bottom of a page uncheck :menuselection:`View --> View Mode --> Continuous`. To rotate your view to the left :menuselection:`View --> Orientation --> Rotate left`. To rotate your view to the right :menuselection:`View --> Orientation --> Rotate right`. To make your view back to how it was at the start :menuselection:`View --> Orientation --> Original Orientation`. To have a fullscreen view press :kbd:`Control+ Shift+ F` or :menuselection:`View --> Full Screen Mode`.
-
-To have a zoomed in view of your document without margins check the :guilabel:`View --> Trim View --> Trim Margins`. To have your view trimmed to where you select :menuselection:`View --> Trim View --> Trim to Selection`.
-
-To select Text press :kbd:`Control + 4`, :menuselection:`Tools --> Text Selection`, or select :menuselection:`Text selection` from the right of the toolbar. To select an area press :kbd:`Control + 3`, :menuselection:`Tools --> Area Selection`, or select :menuselection:`Area Selection` for the right of the toolbar. To select tables press :kbd:` Control + 5`, :menuselection:`Tools --> Table Selection`, or select :menuselection:`Table Selection` from the right of the toolbar. To switch back to moving the view with mouse :menuselection:`Tools --> Browse`, press :kbd:`Control + 1`, or press the :guilabel:`Browse` button on the toolbar. 
-
-To highlight something in yellow press :kbd:`1` or select :menuselection:`Yellow highlighter` from the drop down of the far right of the toolbar. To highlight in green press :kbd:`2` or select :menuselection:`Green Highlighter` from the menu on the far right of the toolbar. To underline something press :kbd:`3` or select :menuselection:`Underline` from the toolbar on the right. To insert a text note into your file press :kbd:`4` or select :menuselection:`Insert Text` from the menu on the right of the toolbar. Then you can click where you want the note and a window will popup you enter your text into. To insert a note inline and not have it be over text making it illegible press :kbd:`5` or select :guilabel:`Inline Note` from the right of the toolbar. Then left click on where you want the note and type the note in the yellow pop up. To have a pop up note press :kbd:`6` or select pop up note from the toolbar on the right. The left click where you want the note and type in the note as you want.
-
-.. image:: Okular-annotation.png
-
-To undo an annotation press :kbd:`Control +Z` or :menuselection:`Edit --> Undo`. To redo something you undid press :kbd:`Control + Shift +Z` or :menuselection:`Edit --> Redo`. To select all press :kbd:`Control + A` or :menuselection:`Edit --> Select All`. To select all text on a current page :menuselection:`Edit --> Select All Text on Current Page`. To copy something you have selected press :kbd:`Control + C` or :menuselection:`Edit --> Copy`.
-
-On the left side of the window Okular has a sidebar. The leftmost tab has thumbnails of the pages of your document. The shaded part of the thumbnail shows the part of the page that is displayed. At the bottom of the thumbnail is a page number. To switch to a page with the sidebar left click on that page. The middle tab of the sidebar shows annotation. To search through your annotations look into :guilabel:`Search` bar. To have the page shown in the tree of what press the leftmost button on the bottom that looks like a page. To show who made the comment press the button that looks like a person. To jump to an annotation simply left click on it. To open all annotation press the downward pointing arrow on the bottom right. To collapse all annotations press the upward pointing arrow. The third tab of the sidebar shows your bookmarks. To hide bookmarks for other files uncheck :guilabel:`Show for all Documents` checkbox. To search your bookmarks enter in the :guilabel:`Bookmarks` bar. To open your bookmark double left click on it. To add a bookmark left click on the :guilabel:`Add Bookmark` button on the bottom. To remove a bookmark on the bottom left click on the :guilabel:`Remove Bookmark` button. The rightmost tab only shows up if your document has it is a Contents tab. To search through your contents type in the :guilabel:`Search` bar. To go to the part of the section of the table of contents simply left click on it. 
-
-To search through your document press :kbd:`Control + F` or :menuselection:`Edit --> Find`. To type in the bar in the bottom what you want to search for. To get to the next result press :kbd:`F3`, the :guilabel:`Find` button on the bottom, or :menuselection:`Edit --> Find Next`. To go to your previous search result press :kbd:`Shift + F3`, the :guilabel:`Previous` button on the bottom, or :menuselection:` Edit --> Find Previous`. To make searching case sensitive press the :guilabel:`Options` button and check the :menuselection:`Case sensitive` checkbox. To start searching at your current page left click on the :guilabel:`Options` button and check the :menuselection:`From current page` checkbox. To start searching as you type press the :guilabel:`Options` button and check the :menuselection:`Find as you type` checkbox. To close find press the :guilabel:`x` button.
-
-.. image:: okular-find.png
-
-To go all the way to the beginning press :kbd:`Control + Home` or :menuselection:`Go --> Beginning of Document`. To go all the way to the end of the document :kbd:`Control + End` or :menuselection:`Go --> End of Document`. To go back after changing pages :menuselection:`Go --> Back`. 
-
-Then to go forward from where you were :menuselection:`Go --> Forward`. To show a magnifier for Okular press :kbd:`Control +6` or :menuselection:`Tools --> Magnifier`. Then left click over where you want to have magnified. To zoom on a particular area press :kbd:`Control+6` or :menuselection:`Tools --> Zoom`. The left click and select which area you want to zoom in on. To zoom back out right click.
-
-To switch to a presentation view press :kbd:`Control + Shift + P` or :menuselection:`View --> Presentation`. To get out of presentation mode press :kbd:`Escape` or move the mouse to the top right corner and left click the quit button. To go forward a slide press :kbd:`Right arrow` or scrolling down with the mousewheel. To go to the previous slide press :kbd:`Left arrow` or scrolling up with the mousewheel. To go to the first slide press :kbd:`Home` and the last slide by pressing :kbd:`End`. 
-
-To view a toolbar on your presentation move the mouse to the top of the screen. The toolbar can go to the previous slide with the left pointing arrow and the next slide with the right pointing arrow. To go to a particular slide type the page number in the box. To autoadvance slides press the play button. To pause autoadvancing slide press the pause button. To draw on your presentation left click on the color you want to draw with left click on that color and then left click to draw using the mouse. To erase your drawing press the eraser button. To entirely erase a drawing press the trash can button. To show which screen to display the presentation on press the screen button and select your screen.
-
-Version
--------
-Lubuntu ships with version 23.08.4 of Okular.
-
-How to Launch
--------------
-
-To launch Okular :menuselection:`Internet --> Okular` or run 
-
-.. code::
-
-   okular
-   
-from the command line.
-
-Customizing
------------
-To Configure Okular press :kbd:`Control + Shift + ,` or :menuselection:`Settings --> Configure Okular`. The :guilabel:`General` tab has settings for files and how to display things. To use smooth scrolling check the :guilabel:`Use smooth scrolling` checkbox. To hide scrollbars on Okular uncheck the :guilabel:`Show scrollbars` checkbox. To have clicking on thumbnails of a page link to that page check the :guilabel:`Link the thumbnails with the page` checkbox. To hide the hints and info messages uncheck the :guilabel:`Show hints and info messages` checkbox. To have notifications about embedded files forms or signatures check the :guilabel:`Notify about embedded files, forms, or signatures` checkbox. To show the document title in the window titlebar check the :guilabel:`Display document title in titlebar if available` checkbox. To choose what to do when you don't have a document title use the :guilabel:`When not displaying document title` drop down menu. To choose a custom background color check the :guilabel:`Use custom background color` checkbox. Then left click on the to the right to pick your background color.
-
-.. image:: Okular-config-general.png
-
-To have tabs for opening new files check the :guilabel:`Open new files in tabs`. checkbox. To switch to an existing tab if the file is already open check the :guilabel:`Switch to existing tab if file is already open` checkbox. To not obey DRM limitations uncheck the :guilabel:`Obey DRM limitations` checkbox. To reload a file if the file changes check the :guilabel:`Reload on file change` checkbox. To display right to left text check the :guilabel:`Right to left reading direction` checkbox. To not load in continuous view by default uncheck the :guilabel:`Open in continuous mode by default` checkbox. To choose your default zoom change the :guilabel:`Default zoom` field.
-
-The :guilabel:`Accessibility` tab has settings making this easier to read. To draw borders around links check the :guilabel:`Draw borders around links` checkbox. To change how the colors appear check the :guilabel:`Change colors` checkbox. To change how the colors appear use the :guilabel:`Color mode` menu.
-
-.. image:: Okular-accessibility.png
-
-To change how Okular performs use the :guilabel:`Performance` tab. To use less CPU uncheck the :guilabel:`Enable transparency effects` checkbox. To change how much memory Okular uses change the :guilabel:`Memory usage` menu. To enable text antialiasing for Okular check the :guilabel:`Enable text antialias` checkbox. To have antialiasing on the graphics check the :guilabel:`Enable graphics antialias` checkbox. To have font hinting in the text check the :guilabel:`Enable text hinting` checkbox.
-
-.. image:: Okular-performance.png
-
-To have settings for your presentation use the :guilabel:`Presentation` tab. To have your slides advance automatically check the :guilabel:`Advance automatically` checkbox. To change soon to change slides change the drop down to the right of :guilabel:`Advance automatically`. To choose the color of your background choose from the :guilabel:`Background color` field. To change the transition of Okular use the :guilabel:`Default transition` menu. To choose which screen to present on by default use the :guilabel:`Preferred Screen` menu. 
-
-.. image:: Okular-Presentation.png
-
-To change settings for Annotations in Okular sue the :guilabel:`Annotations` tab. To switch how many things to be on the annotations toolbar use the :guilabel:`Annotation toolbar` menu. To change your name for annotations change the :guilabel:`Author` field. To make a custom new annotation press the :guilabel:`Add button`. To change an existing annotation press the :guilabel:`Edit` button. To delete and annotation press the :guilabel:`Remove` button. To move an annotation down press the :guilabel:`Move Down` button. To move an annotation back up press the :guilabel:`Move Up` button.
-
-.. image:: Okular-annotations-pref.png
-
-

source/2/2.2/2.2.7/qpdfview.rst

@@ -0,0 +1,121 @@
+Chapter 2.2.7 qpdfview
+======================
+
+qpdfview is the default PDF viewer for Lubuntu.
+
+Features:
+ - Tabs
+ - Presentation mode
+ - Zoom to entire page/ page width
+ - Rotating pages
+ - Outline, properties, thumbnail, and bookmark docks
+ - Printing support
+ - Annotation and highlighting 
+ - Bookmarks
+ - Customizable keyboard shortcuts
+ - Viewing postscript files
+
+Usage
+------
+To open a PDF file use :menuselection:`File --> Open` or press :kbd:`Control + O` on the keyboard. If you have a PDF open use :menuselection:`File --> Open in new tab` from the menu, click the Open in new tab button or press :kbd:`Control + T`. To refresh a PDF click the Refresh button, :menuselection:`File --> Refresh`, or press :kbd:`F5` just like most web browsers. To switch between tabs on the keyboard you can press control :kbd:`control + tab` or :menuselection:`Tabs --> Next Tab` to go the next tab or :kbd:`control + shift + tab` or :menuselection:`Tabs --> Previous Tab` to cycle through your tabs in the opposite direction. At the bottom of the tab menu will be a list of all your tabs you have open with the title of each document. To close the tab press the red X button on the tab or press :kbd:`Control +W`. To close all tabs on qpdfview press :kbd:`Control + Shift +W`. To restore the most recently closed tabs press :kbd:`Alt+Shift+W` or :menuselection:`Restore most recently closed tab`. To view a menu with your recently closed tab :menuselection:`Tabs --> Recently Closed` and select the file you want. To see a list of all your tabs in a menu they are at the bottom of the :menuselection:`Tabs` menu.
+
+If you want a second copy of a PDF file open right click on the tab and :menuselection:`Open copy in new tab`. If you want a copy of the current PDF on the tab and select :menuselection:`Open copy in new window`. To open your file manager in the current directory right click on the tab and :menuselection:`Open containing folder`. To one PDF file on the left and another on the right click on the tab bar and select :menuselection:`Split view horizontally` and then select the PDF you want to open beside the other tab. To have one PDF file on top of another right click and select :menuselection:`Split view vertically` and select which PDF you want one of top of the other. To switch between which PDF you are able to change pages of simply move the mouse over that PDF. To close go back to only one PDF file per tab right click on the tab and select :menuselection:`Close current view`.
+
+To close all tabs right click on the tab bar and :menuselection:`Close all tabs`. To Close all tabs but that one you right click on right click on a tab and :menuselection:`Close all tabs but this one`. To close all tabs to the right of the one you right click right click on a tab and :menuselection:`Close all tabs to right`. To close all tabs to the left right click on a tab and :menuselection:`Close all tabs to left`. To reorder your tabs left click and drag the tab where you want it in the order.
+
+.. image:: qpdfview-tab-context.png
+
+If you want to view a particular page select the box (e.g. page 1/3) in towards the top left corner and type the page number (e.g. page 3/3). To move to the previous and next page press the :kbd:`left arrow` and :kbd:`right arrow` buttons respectively. Scrolling with the mousewheel past the end or beginning of a page will also change the page. Another way to move to the next page is to press :kbd:`spacebar` or :menuselection:`Edit --> Next page`. Another way to go to the previous page is pressing :kbd:`Backspace` or :menuselection:`Edit --> Previous page`.  Another way to jump to a particular page is to press :kbd:`control + j` or :menuselection:`Edit --> Jump to page`. To go back to page which you have just come from press :kbd:`control + enter` or :menuselection:`Edit --> Jump backward`. To jump forward a page press :kbd:`control + shift + enter` or :menuselection:`Edit --> Jump forward`. To move to the last page of the PDF press the :kbd:`End` key or :menuselection:`Edit --> Last Page`. To move to the first page of the PDF press the :kbd:`Home` key or :menuselection:`Edit --> First page`.
+
+To select text or an image from qpdfview press :kbd:`control+c` or :menuselection:`Edit --> Copy to clipboard`. Then the cursor will turn into a crosshair and you will be able to expand a box to select either text or an image and a menu to select copying the text, selecting the text, copying the image, or saving the image to file. Another way to copy text is to press :kbd:`Shift + Left Click`.
+
+To save your PDF file is to :menuselection:`File --> Save` or you can press :kbd:`Control + s`. You can save the file with a different name with :menuselection:`File --> Save as`. To save a copy of the document click :menuselection:`File --> Save a copy`. If the next time you want to open a PDF to a specific page as first page right click :menuselection:`Set first page`. :menuselection:` If you want to quit qpdfview press :kbd:`Control+Q`.
+
+To view both the bottom of one page and the top of another page press :kbd:`Control+7` or :menuselection:`View --> Continuous`. To view two pages at once like if you want to see a two page spread of an illustration in a PDF of a book press :kbd:`Control + 6` or :menuselection:`View --> Two pages`. To get your view back to normal press :kbd:`Control +6` again or :menuselection:`View --> Two pages` again. To view the first page as a separate title page and then two pages side by side press :kbd:`Control+5` or :menuselection:`View --> Two pages with title page`. To toggle the view of three pages at a time press :kbd:`Control +4` or :menuselection:`View --> Multiple pages`. To view right to left languages on qpdfview press :kbd:`Control +Shift +R` or :menuselection:`View --> Right to left`. To view the fonts embedded in the PDF :menuselection:`View --> Fonts`.
+
+To search through your PDF file you can press :kbd:`control + f` or from the menu :menuselection:`Edit --> Search`. You will get taken to the results and will appear highlighted in yellow to see through the results you can press the down arrow, right click :menuselection:`Find next`, or press :kbd:`F3` to see results farther in the document and press the upward pointed arrow button, right click :menuselection:`Find previous`, or press :kbd:`Shift +F3` to see results towards the start of the document. To exit the search dialog press :kbd:`Escape`, the :guilabel:`Octagon button`, right click :menuselection:`Cancel search`, or :menuselection:`Edit --> Cancel search`. If you want searches to match case check the :guilabel:`Match case` checkbox. To match entire words check the :guilabel:`Whole words` checkbox. To highlight all matches of words check the :guilabel:`Highlight all` checkbox.
+
+.. image:: qpdfview-search-bar.png
+
+To make qpdfview fullscreen you can press :kbd:`f11` or :menuselection:`View --> Fullscreen`.
+
+To make an annotation press :kbd:`Control +A` or :menuselection:`Edit --> Add annotation`. To view the annotation you have made or edit it again press click on what looks like a sticky note with a pin in it. To remove your annotation right click on the annotation and click :menuselection:`Remove annotation`. If you just want to highlight something right click on the text and select :menuselection:`Add highlight` text.
+
+To select page width in zoom in qpdfview is a drop down menu with page width to show the width of the page on qpdfview, :menuselection:`View --> Fit to page width`, or press :kbd:`Control +9`. To view the whole page on qpdfview in this drop down menu select whole page, :menuselection:`View --> fit to page size`, or press :kbd:`Control + 8`. To return to the original zoom press :kbd:`Control + 0` or :menuselection:`View --> Original size`. To zoom in is press the magnifying glass with a + in it or press :kbd:`Control + +` or :menuselection:`View --> Zoom in`. To zoom out press the magnifying glass button with a - in it or press :kbd:`Control + -` or :menuselection:`View --> Zoom out`. To rotate the file to the left is press :kbd:`Control + Left arrow` or :menuselection:`View --> Rotate Left`. To rotate the file to the right is press :kbd:`Control + Right arrow` or :menuselection:`View --> Rotate Right`. Another way to rotate is to hold :kbd:`Shift` and then use the mousewheel. Another way to zoom with the scrollwheel is to hold :kbd:`Control` and zoom with the mousewheel.
+
+To view a list of all tabs you have open you can select them by the title of the PDF by the bottom of the :guilabel:`Tabs` menu.
+
+If you have a particularly long PDF file you might want to make a bookmark to find a specific thing easily. To create a bookmark press :kbd:`control +b` or  :menuselection:`Bookmarks -->  Add Bookmark` and give the bookmark a memorable title and description so you can find it in this document again easily. If you later want to remove the bookmark go :menuselection:`Bookmarks --> Remove bookmark` or press :kbd:`control+ shift+ B`.
+
+Screenshot
+----------
+.. image:: qpdfview.png
+
+Docks
+-----
+qpdfview also includes some very useful docks. To view the outline dock, in the menu select :menuselection:`View --> Docks --> Outline (make sure the button is checked)` or press :kbd:`F6` on the keyboard. It should appear on the left hand side of the PDF with collapsible sections and to expand or collapse each section left click on the :menuselection:`-->`. To go to a particular part of the outline double click on that part of the outline. To see the entire outline right click on the outline and select :menuselection:`Expand all`. To have your outline back to the original state right click on it and select :menuselection:`Collapse all`. This is useful in navigating large PDFs.
+
+.. image:: qpdfview-outline.png
+
+To view properties of your PDF file press :kbd:`F7` or :menuselection:`View --> Docks --> Properties`. To see a thumbnail of each page :menuselection:`View --> Dock --> Thumbnails` or press :kbd:`F8` to view a thumbnail of each page of the PDF file. If you want to close one of these docks click the X button on the dock to close it. To detach a dock to its own floating window press the diamond button to detach it. To get the dock back to where it was press the diamond button again.
+
+.. image:: properties-dock.png
+
+Presentation
+-------------
+To enter presentation mode you can press :kbd:`f12` or :menuselection:`View --> Presentation` which makes the content of the PDF take up the fullscreen and gives you no menubars or toolbars. To exit presentation mode you can press :kbd:`f12` again. To advance to the next page in the presentation press the :kbd:`spacebar` or the :kbd:`right arrow`. To go back a page in presentation press the :kbd:`left arrow`. To exit the presentation press :kbd:`escape`. To go to the first page of the presentation press the :kbd:`Home` key. To go to the last page of the presentation press the :kbd:`End` key.
+
+Printing
+--------
+
+To print your PDF press :kbd:`Control + P` or :menuselection:`File --> Print`. To change what printer you use use the :guilabel:`Name` drop down to select the name of the printer. To see more options press the :guilabel:`Options >>` button to see more options when you print. To select which pages to print use the :guilabel:`Pages from` button and then the fields for the first page to print and then the last page to print. To change what pages you print and type the page number in use the :guilabel:`Pages` field. To print your current page press the :guilabel:`Current Page` button. To change how many copies you print change the :guilabel:`Copies` field.
+
+.. image:: qpdfview-print.png
+
+If you are printing the PDF in black and white you can however  toggle previewing  the file in black and white by pressing :kbd:`Control + U` or :menuselection:`View --> Convert to grayscale`. To invert the colors of your PDF press :kbd:`Control +I` or :menuselection:`View --> Invert Colors`. To trim the margins off your PDF file press :kbd:`control +Shift +U` or :menuselection:`View --> Trim margins`. If you want to turn off changed colors or trimmed margins off press or use the menu in the same thing again.
+
+Customizing
+-----------
+To add your own settings to qpdfview you can get to a settings window with :menuselection:`Edit --> Settings`. To change how qpdfview uses links or manages tabs left click on the :guilabel:`Behavior` tab. The checkbox :guilabel:`Open URL` allows you to turn on or off Opening URLs or links within qpdfview. The :guilabel:`Auto-refresh` checkbox reloads the PDF whenever the file changes which is useful for authoring PDF files. To have qpdfview keep track of recently check the :guilabel:`Track recently used` checkbox. To keep track of recently closed documents check the :guilabel:`Keep recently closed` checkbox. To open the tabs you had open last time with qpdfview the next time you open the program check the :guilabel:`Restore tabs` checkbox. To restore bookmarks after qpdfview is closed check the :guilabel:`Restore bookmarks` checkbox. To have per file settings restored each time you open qpdfview check the :guilabel:`Restore per-file settings` checkbox. To change the page in the main view in addition with the presentation check the :guilabel:`Synchronize presentation` checkbox. To change what screen you use for presentations change the :guilabel:`Presentation Screen` field to the number of the screen you want to use.  To have your outline dock follow what section you  are viewing check the :guilabel:`Synchronize outline view` checkbox. If you want to scroll once to change an entire page check the :guilabel:`Minimal scrolling` checkbox. To change the color of highlights type a hex number for a color or select one from the :guilabel:`Highlight Color` drop down menu.
+
+.. image:: qpdfviewprefrences.png
+
+If you want to reset these settings to the defaults is to press the :guilabel:`Defaults` button. If you just want defaults on the current tab you can press the :guilabel:`Defaults on current tab` button. If you want to return to viewing your PDF with the same settings press the :guilabel:`OK` button. If you wish to discard your changes press the :guilabel:`Cancel` button.
+
+To deal with settings on graphics press press on the :guilabel:`Graphics` tab. To toggle having a small decoration showing where different pages are check the :guilabel:`Decorate pages` checkbox. To toggle having a red border around hyperlinks check the :guilabel:`Decorate links` checkbox. To toggle having a blue borders around fillable forms in a PDF check the :guilabel:`Decorate form fields` checkbox. The settings for paper color will has a drop down menu for previewing what it is like printing on colored paper. The checkbox :guilabel:`Prefetch` will preload pages not directly viewed by the PDF viewer not directly on the screen however this will use more resources. The drop down for :guilabel:`Cache size` will increase loading speed but will use more resources. The :guilabel:`Prefetch` checkbox loads pages before you view them. The :guilabel:`Prefetch distance` tells you how many pages away from where you are to load. The field for :guilabel:`Presentation background color` sets the color of the background for presentations. The :guilabel:`Cache size` menu increases the size of the cache which will apply more system resources to run heavy PDFs with hundreds of pages of full color artwork.
+
+.. image:: qpdfview-graphics.png
+ 
+The :guilabel:`PDF` subtab of the graphics tab has settings for font and paper color for viewing PDF files. To antialias images check the :guilabel:`Antialiasing` checkbox. To antialias text check the :guilabel:`Text antialiasing` checkbox. To use font hinting to view text easier to view change the :guilabel:`Text hinting` menu to Reduced or full. To not change the background color with change the :guilabel:`Ignore paper color` checkbox. To change how qpdfview draws thin lines change the :guilabel:`Thin line mode` drop down menu. 
+
+.. image:: Graphic_PDF_subtab.png
+
+The :guilabel:`PS` subtab manages how Postscript files appear on the screen. To change how many bits are used for antialiasing graphics change the :guilabel:`Graphics antialias bits` field. To change the number of bits of text antialiasing change :guilabel:`Text antialiasing bits` field.
+
+.. image:: graphics-postscript.png
+
+To change the interface settings click on the :guilabel:`Interface` tab. If you want the tabs to be spread out press the spread tabs checkbox. The :guilabel:`Tab position` changes where the tabbar on the window. The :guilabel:`Tab visibility` menu can be set to as needed, always or never which will show or hide the tabbar. The checkbox for :guilabel:`New tab next to current tab` opens new tabs next to the current one. The field :guilabel:`Recently used count` lets you set the maximum number of files to keep around in recently used. The :guilabel:`Spread tabs` checkbox spreads the tabs to take up the whole tab bar and they get smaller the more tabs you open. To have qpdfview close when the last tab in qpdfview is closed check the :guilabel:`Exit after last tab` checkbox. To change the number of recently used PDF files in the menu change the :guilabel:`Recently used count` field. To change how many recently closed tabs of PDFs are shown change the :guilabel:`Recently closed count` field. To toggle showing the current page in the window title check the :guilabel:`Current page in window title`.
+
+.. image:: qpdfview-interface.png
+
+The :guilabel:`Shortcuts` tab provides the ability to customize keyboard shortcuts. The :guilabel:`Action` column is what each keyboard shortcut does. The :guilabel:`Key sequence` column shows the keyboard shortcut. Double click in the key sequence column and type in your desired keyboard shortcut to change the keyboard shortcut.
+
+.. image:: qpdfview-shortcuts.png
+
+The :guilabel:`Modifiers` tab allows you to change settings with the mouse and certain keyboard shortcuts in combination with the mouse. To change what keyboard shortcut to hold down while you hold down your mousewheel to zoom use the :guilabel:`Zoom` drop down menu. To change what keyboard key to hold down before using the mousewheel use the :guilabel:`Rotate` key. To change what key to press when you copy text to the clipboard when also pressing a mouse button use the :guilabel:`Copy to Clipboard` drop down menu. To switch which key you press when left clicking to add an annotation use the :guilabel:`Add annotation` drop down menu. To change what what you press to while left clicking to zoom to a selection change the :guilabel:`Zoom to Selection` drop down menu.
+
+.. image:: qpdfview-modifiers.png
+
+Version
+-------
+Lubuntu ships with version 0.5.0 of qpdfview.
+
+How to Launch
+-------------
+To launch qpdfview go to the Menu :menuselection:`Office --> qpdfview` or run 
+
+.. code:: 
+
+   qpdfview 
+
+from the command line. The icon for qpdfview looks like an eye with a blue background.

source/2/2.2/Office_Applications.rst

@@ -13,4 +13,4 @@ This chapter documents office applications including the LibreOffice office suit
   2.2.4/libreoffice_impress
   2.2.5/libreoffice_math
   2.2.6/libreoffice_writer
-  2.2.7/Okular
+  2.2.7/qpdfview

source/2/2.3/2.3.1/lximage-qt.rst

@@ -7,13 +7,9 @@ Usage
 ------
 To open a picture press :menuselection:`File --> Open File`, :kbd:`Control + O`, or press the button that looks like an upward pointing arrow. To open a directory full of images press :kbd:`Control+D` or :menuselection:`File --> Open Directory`. If you do not like the picture press :kbd:`Del` or :menuselection:`File --> Delete`. To open a new window of LXImage press :kbd:`Control +N` or :menuselection:`File --> New Window`. To view the properties of your image by :menuselection:`File --> File Properties`. To view your recently viewed pictures :menuselection:`File --> Recently Opened Files`. To clear your recently opened files :menuselection:`Files --> Recently Opened --> Clear`. To reload your file after you save it again press :kbd:`Control +R`, press the circular arrow button, or :menuselection:`File --> Reload file`.
 
-If you want to upload a picture to share it online press :menuselection:`Edit --> Upload` and a new window will pop up with a drop down menu to show where to upload the picture to. To actually upload the file press :guilabel:`Start`. The URL of the image will then show up from after it is finished uploading. You can then copy the URL by selecting the   text and then pressing :kbd:`Control+C`.
-
-.. image:: lximage_upload.png
-
-
 To have LXImage open the next file in a folder press :kbd:`Right arrow` and to view the previous image press the :kbd:`Left arrow`. To open an entire directory :menuselection:`File --> Open Directory` or press :kbd:`Control +D`. To save the file as something press :kbd:`Control+Shift+S`, the downward pointed arrow with an I on it, or :menuselection:`File --> Save As`. To save the file with the same file name press :kbd:`Control+S` or :menuselection:`File -->Save`. To rename a file press :kbd:`F2` or :menuselection:`Edit --> Rename`.
 
+.. image:: LXImage.png
 
 If you wish to print a picture after viewing it from the :menuselection:`File --> Pint` or press :kbd:`control+ p` to bring up a print dialog. To change the printer change the :guilabel:`Name` field. To toggle viewing more options for printing press the :guilabel:`Options` button. To change how many copies of an image you want to print change the :guilabel:`Copies` field. To collate the pages to print check the :guilabel:`Collate` checkbox. To reverse the order printed check the :guilabel:`Reverse` button. To exit the window with a keyboard shortcut press the :kbd:`Escape` key.
 
@@ -37,17 +33,14 @@ To view the next picture on your image press the :kbd:`right arrow`, right click
 
 To view thumbnails of the current directory you can toggle thumbnails by pressing :kbd:`T` or :menuselection:`View --> Show Thumbnails` and thumbnails will show at the bottom with a scrollbar at the bottom of the window to view the whole folder. To open the thumbnail of a picture in a another program such as one to edit that picture right click :menuselection:`Open With` and select the program you want to edit with or you can do this by :menuselection:`File --> Open With`. To rename an image after viewing it right click on the thumbnail select :menuselection:`Rename` and type the filename for the picture you want. To move a file to the trash can right click on it and select :menuselection:`Move to Trash`.
 
-
 .. image:: lximage-thumb.png
 
 To view the picture entirely press :menuselection:`View --> Fit` or the button with a vertical and horizontal arrow and a folded over bottom right corner. To return your image to its original size  :menuselection:`View --> Original Size` or press the :guilabel:`1` toolbar button. To show an outline around the image press :kbd:`O` or :menuselection:`View --> Show Outline`. To toggle showing information about the settings on the camera :menuselection:`View --> Show EXIF Data`. 
 
-
 To view the picture as fullscreen press :kbd:`f11`, right click :menuselection:`Fullscreen`, double click on the image, or :menuselection:`View --> Fullscreen`. To exit fullscreen double click the image, press :kbd:`F11`, or right click :menuselection:`Fullscreen` again. To have a slideshow of you pictures in your current folder :menuselection:`View --> Slideshow` or right click and select :menuselection:`Slide Show`. Once you start the slideshow on the toolbar a play pause button will appear on the toolbar or you can stop the slideshow by right clicking and selecting :menuselection:`Slide Show`.
 
 To close LXImage press :kbd:`Control+w` or :menuselection:`File --> Close`. 
 
-
 Annotations
 ------------
 To show annotations controls :menuselection:`View --> Annotations Toolbar` or right click and select :menuselection:`Annotations Toolbar`. To edit your images with LXImage there are several buttons on the right hand side of the toolbar. To draw and arrow press the button that looks like an arrow click once where you want the arrow to start and then drag the direction you want the arrow to point and click it where you want the arrowhead to be. To draw a hollow rectangle left click on the button with a hollow rectangle and click and drag to the size of the rectangle you want. To draw a hollow circle annotation press the button that looks like a hollow circle. To draw numbers on your pictures press the :guilabel:`3` button. To stop drawing annotations press the button with a circle with a slash through it.
@@ -59,7 +52,6 @@ Customizing
 
 To change preferences in LXImage :menuselection:`Edit --> Preferences`. The :guilabel:`General` tab has settings for recent files, thumbnails, and trash. To cancel your changes press the :guilabel:`Cancel` button. To not generate thumbnails for really large images change the :guilabel:`Thumbnailer size limit` field. To change how big thumbnails to use change the :guilabel:`Thumbnail image dimensions` field. To apply your settings and exit the preference dialog by pressing the :guilabel:`OK` button.
 
-
 .. image:: lximage-prefrences.png
 
 The :guilabel:`Window` tab manages how the window appears. To show the thumbnails dock by default check the :guilabel:`Show thumbnails dock by default` checkbox and choose where it is to the right. To show metadata about your pictures by default check the :guilabel:`Show Exif data dock by default` checkbox. To toggle showing the menubar check/uncheck the :guilabel:`Show menubar by default` checkbox. To toggle showing the main toolbar check/uncheck the :guilabel:`Show main toolbar by default` checkbox. To show the annotations toolbar by default check the :guilabel:`Show annotations toolbar by default`.
@@ -76,7 +68,7 @@ The :guilabel:`Shortcuts` tab has settings for changing keyboard shortcuts in LX
 
 Version
 -------
-Lubuntu ships with version 1.40 or LXImage-Qt. 
+Lubuntu ships with version 2.2.0 or LXImage-Qt. 
 
 How to Launch
 -------------

source/2/2.3/2.3.2/screengrab.rst

@@ -7,7 +7,7 @@ Usage
 -----
 To take a new screenshot press the button with a piece of paper with a :guilabel:`+` on it or press :kbd:`Control+N`. After doing this a preview will appear in the center of the window. If you want to save this screenshot press the save :guilabel:`downward pointing arrow` or press :kbd:`Control+S`. To copy your screenshot to a clipboard press the button with two pieces of paper or press :kbd:`Control+C`. To edit your screenshot in an image editor :menuselection:`Edit in` and select the program you want to use to edit or double click on the image to open it in an editor. To quit ScreenGrab press :kbd:`Escape` or press the button to the right with a door and a rightward pointed arrow.
 
-To change what mode to select what are of the screen to take a screenshot from change the :guilabel:`Type` drop down menu. The options in the :guilabel:`Type` menu are :menuselection:`Full screen` to take a picture of everything on all of your screens. From the :guilabel:`Type` menu select :menuselection:`Window` to select your last window. To change how long to delay before taking the screenshot change the :guilabel:`Delay` field. To include the mouse pointer in your screenshot check the :guilabel:`Include mouse pointer` checkbox. To not have titlebars of the window check the the :guilabel:`No window decoration` checkbox. To more precisely select which exact pixel you want to select when selecting an area of the screen check the :guilabel:`Zoom area around mouse` checkbox.
+To change what mode to select what are of the screen to take a screenshot from change the :guilabel:`Type` drop down menu. The options in the :guilabel:`Type` menu are :menuselection:`Full screen` to take a picture of everything on all of your screens. From the :guilabel:`Type` menu select :menuselection:`Window` to select your last window. To choose the last area of the screen you selected select :menuselection:`Last Selected Area` from :guilabel:`Type` menu. To change how long to delay before taking the screenshot change the :guilabel:`Delay` field. To include the mouse pointer in your screenshot check the :guilabel:`Include mouse pointer` checkbox. To not have titlebars of the window check the the :guilabel:`No window decoration` checkbox. To more precisely select which exact pixel you want to select when selecting an area of the screen check the :guilabel:`Zoom area around mouse` checkbox.
 
 To take a screenshot where you select the screen with the mouse double click to get a where you currently have selected. To select at where there is a change in the image right click after sizing screen area to have ScreenGrab autoselect where to take the edge of the screenshot. To see how many pixels your screenshot will be when selecting a screen area it will show in the lower right hand corner of the screen.
 
@@ -21,7 +21,7 @@ Screenshot
 
 Version
 -------
-Lubuntu ships with version 2.7.0 of ScreenGrab.
+Lubuntu ships with version 3.0.0 of ScreenGrab.
 
 How to Launch
 -------------
@@ -35,19 +35,17 @@ The icon for ScreenGrab looks like a teal camera shutter with a white layer on t
 
 Customizing
 -----------
-
 To change your settings on ScreenGrab press the :guilabel:`gear` button or press :kbd:`Control +P`. The :guilabel:`Main` tab has settings for saving your screenshot and image quality. To change where ScreenGrab saves files by default change the :guilabel:`Default save directory` field or press :guilabel:`Browse` button to pop up a dialog to choose where to save. To change the default file name for your screenshots change the :guilabel:`Name` field. To change what format to save as by default change the :guilabel:`Format` drop down menu. To choose to copy the file name to the clipboard change the :guilabel:`Copy file name to the clipboard when saving` menu. If you are saving a JPEG image you can change the image quality with the :guilabel:`Image quality` slider.
 
-
 .. image:: ScreenGrab-Main.png
 
 To restore your options to default press the :guilabel:`Restore Defaults` button. To cancel making changes press the :guilabel:`Cancel` button. To save your changes press the :guilabel:`Save` button.
 
-To change your settings on multiple windows and automatically saving use the :guilabel:`Advanced` tab. To automatically insert a time and date in the file name check the :guilabel:`Insert current date and time in file name` checkbox. To change how this date appears enter the date in the :guilabel:`Template` field that only shows if you insert the date and time. To automatically save each screenshot check the :guilabel:`Autosave screenshot` checkbox. To save the first screenshot check the :guilabel:`Save first screenshot` checkbox that only shows if you are autosaving screenshots. To allow more than one ScreenGrab window check the :guilabel:`Allow multiple instances of ScreenGrab` checkbox. To allow editing in a different image viewer check the :guilabel:`Enable external viewer` checkbox. To have selection autoselect an edge like of a window check the :guilabel:`Fit to edges inside selected area by right clicking` checkbox.
+To change your settings on multiple windows and automatically saving use the :guilabel:`Advanced` tab. To automatically insert a time and date in the file name check the :guilabel:`Insert current date and time in file name` checkbox. To change how this date appears enter the date in the :guilabel:`Template` field that only shows if you insert the date and time. To automatically save each screenshot check the :guilabel:`Autosave screenshot` checkbox. To save the first screenshot check the :guilabel:`Save first screenshot` checkbox that only shows if you are autosaving screenshots. To allow more than one ScreenGrab window check the :guilabel:`Allow multiple instances of ScreenGrab` checkbox. To allow editing in a different image viewer check the :guilabel:`Enable external viewer` checkbox. To have selection autoselect an edge like of a window check the :guilabel:`Fit to edges inside selected area by right clicking` checkbox. To add a notification on saving and copying check the :guilabel:`Notify on saving and copying` checkbox. To change how long to show the notification use the :guilabel:`Duration` field.
 
 .. image:: ScreenGrab-advanced.png
 
-To changes with how ScreenGrab shows in the system tray use the :guilabel:`System tray` tab. To toggle showing ScreenGrab in the system tray check/uncheck the :guilabel:`Show ScreenGrab in the system tray` checkbox. To change when ScreenGrab shows notifications change the :guilabel:`Tray messages` field. To change how long to display tray messages change the :guilabel:`Time to display tray messages` field. To not close ScreenGrab when closing the window but keep it in the system tray check the :guilabel:`Minimize to tray when closing` checkbox.
+To changes with how ScreenGrab shows in the system tray use the :guilabel:`System tray` tab. To toggle showing ScreenGrab in the system tray check/uncheck the :guilabel:`Show ScreenGrab in the system tray` checkbox. To not close ScreenGrab when closing the window but keep it in the system tray check the :guilabel:`Minimize to tray when closing` checkbox.
 
 .. image:: ScreenGrab-systray.png
 

source/2/2.3/2.3.3/Skanlite.rst

@@ -9,23 +9,24 @@ To preview what you want to scan press the :guilabel:`Preview` button and you ca
 
 If your scanner is not detected a you will get a device saying "Sorry no devices detected" while having a button for :guilabel:`Reload devices list` to try and find your scanner again. If you want to cancel press the :guilabel:`Cancel` button.
 
-To change the dpi or dots per inch is the dpi drop down menu for :guilabel:`Scan resolution` but keep in mind the higher the number of dpi the better the picture quality but the longer it will take to scan. Changing the :guilabel:`Scan mode` allows you to select color to select color scanning or gray to only show your scan in gray and not use color ink if you would want to print it out again.  
+.. image:: skanlite.png
 
-To zoom in press the magnifying glass button with a plus sign conversely to move out press the magnifying glass button with a minus sign. To change your resolution change the scan resolution drop down and select the dots per inch you want to use.
+To change the dpi or dots per inch is the dpi drop down menu for :guilabel:`Scan resolution` but keep in mind the higher the number of dpi the better the picture quality but the longer it will take to scan. Changing the :guilabel:`Scan mode` allows you to select color to select color scanning or gray to only show your scan in gray and not use color ink if you would want to print it out again. To select a specific paper size to scan use the :guilabel:`Scan Area Size` drop down menu. To choose a width of your scan change the :guilabel:`Width` field. To change the Height of your area to scan change the :guilabel:`Height` field. To add an offset on the x axis use :guilabel:`X offset` field. To change the offset of the y axis use the :guilabel:`Y Offset` field.
 
-To change the brightness of a scan slide the :guilabel:`Brightness` slider or input a positive or negative number into the numeric field. To change contrast slide the :guilabel:`Contrast` slider or input a positive or negative number in the numeric field. To toggle inverting your colors on the scan check/uncheck the :guilabel:`Invert colors` Checkbox. 
+To zoom in press the magnifying glass button with a plus sign conversely to move out press the magnifying glass button with a minus sign. To clear a selection of area to scan left click the :guilabel:`leftward pointing arrow with an x` button.
 
-To select part of a scan you particularly want to save is to click over a preview of a scan and you will drag the selection with the mouse. To clear selections that can be automatically selected but canceled with a brown smudge with an x on it. If you want to zoom to your selection right click :guilabel:`Zoom to selection`. If you want to zoom to fit the whole entire page right click :guilabel:`Zoom to fit`. 
+To change brightness, contrast or even invert colors use the :guilabel:`Advanced Options` tab. To change the brightness of a scan slide the :guilabel:`Brightness` slider or input a positive or negative number into the numeric field. To change contrast slide the :guilabel:`Contrast` slider or input a positive or negative number in the numeric field. To toggle inverting your colors on the scan check/uncheck the :guilabel:`Invert colors` Checkbox. To change the delay between scans in a batch scans when scanning in batch mode use the :guilabel:`batch mode delay time` field.
+
+.. image:: skanlite-advanced.png
+
+To select part of a scan you particularly want to save is to click over a preview of a scan and you will drag the selection with the mouse. To clear selections that can be automatically selected but canceled by press the :guilabel:`leftward pointing arrow with an x` on it. If you want to zoom to your selection right click :guilabel:`Zoom to selection`. If you want to zoom to fit the whole entire page right click :guilabel:`Zoom to fit`. To zoom in the scan preview press the :guilabel:`+` button.To zoom out from the scan preview press the :guilabel:`-` button.
 
 To change to your specific options for your scanner use the :guilabel:`Scanner Specific Options` tab.
 
 Version
 -------
-Lubuntu ships with version 23.08.3 of Skanlite.
+Lubuntu ships with version 25.07.9 of Skanlite.
 
-Screenshot
-----------
-.. image:: skanlite.png
 
 How to Launch
 -------------
@@ -39,6 +40,8 @@ from the command line. The icon for Skanlite looks like a scanner bed with a bar
 
 Customizing
 -----------
-To customize your settings for Skanlite press the :guilabel:`Settings` button. To choose where to save your scans enter the path in the :guilabel:`Save Location` field or press the button to the right. To ask what to save what you are scanning change the :guilabel:`Save mode` menu :menuselection:`Open the save dialog for every image`. To ask for each scan in the :guilabel:`Save Mode` menu select :menuselection:`Open the save dialog for first image only` selection. To choose the default save name and format enter in the :guilabel:`Name & Format` filed with a drop down menu for scan format. To choose what quality to save your quality check the :guilabel:`Specify save quality` checkbox. Then drag the slider or percentage to change the quality. To change the Dots per inch resolution when previewing check the :guilabel:`Set preview resolution` checkbox and then change field to the right side. To not automatically crop the selection check the :guilabel:`Disable automatic selections` checkbox. To get the scanner back to its default values press the :guilabel:`Revert scanner options to default values`.
+To customize your settings for Skanlite press the :guilabel:`Configure` button. To choose where to save your scans enter the path in the :guilabel:`Save Location` field or press the button to the right to open a file picker. To ask what to save what you are scanning change the :guilabel:`Save mode` menu :menuselection:`Open the save dialog for every image`. To ask for each scan in the :guilabel:`Save Mode` menu select :menuselection:`Open the save dialog for first image only` selection. To choose the default save name and format enter in the :guilabel:`Name & Format` filed with a drop down menu for what filetype to save your scans. To choose what quality to save your quality check the :guilabel:`Specify save quality` checkbox and select the quality in the field to the right. Then drag the slider or percentage to change the quality.
+
+To change the Dots per inch resolution when previewing check the :guilabel:`Set preview resolution` checkbox and then change field to the right side. To not automatically crop the selection check the :guilabel:`Disable automatic selections` checkbox. To get the scanner back to its default values press the :guilabel:`Revert scanner options to default values`.
 
 .. image:: skanlite-pref.png

source/2/2.4/2.4.1/lxqt-archiver.rst

@@ -15,7 +15,7 @@ To create a new archive press :menuselection:`File --> New` or press :kbd:`Contr
 
 To navigate to a folder inside of an archive double click on it in the center of the window or double click on the left side pane. To move back up in a directory double click on the folder :guilabel:`..`. To select all files press :kbd:`Control + A` or :menuselection:`Edit --> Select All`.
 
-To reload the view of the archive press :kbd:`F5` or :menuselection:`View --> Reload`. To view the whole directory tree press :kbd:`Control+ Shift + E` or :menuselection:`View --> Expand`. To view just the top level of directory tree press :kbd:`Control + Shift + C` or :menuselection:`View --> Collapse`. To search for files press :kbd:`Control +F` or :menuselection:`View --> Filter`. Type what you want to search for in the textbox at the bottom. To hide searching press :kbd:`Control+F` or :menuselection:`View --> Filter` again.
+To reload the view of the archive press :kbd:`F5` or :menuselection:`View --> Reload`. To view the whole directory tree press :kbd:`Control+ Shift + E` or :menuselection:`View --> Expand`. To view just the top level of directory tree press :kbd:`Control + Shift + C` or :menuselection:`View --> Collapse`. To search for files press :kbd:`Control +F` or :menuselection:`View --> Filter`. Type what you want to search for in the textbox at the bottom. To clear search press the :guilabel:`rightward pointing arrow with an x in it`. To hide searching press :kbd:`Control+F` or :menuselection:`View --> Filter` again.
 
 .. image:: lxqt-archiver.png
 
@@ -25,7 +25,7 @@ To close LXQt File Archiver press :kbd:`Control+Q`.
 
 Version
 -------
-Lubuntu ships with version 0.9.1 of LXQt File Archiver.
+Lubuntu ships with version 1.2.0 of LXQt File Archiver.
 
 How To Launch
 -------------