Update lxqt-sudo screenshot

CONTRIBUTING.md

@@ -10,7 +10,7 @@ Before starting, you need a few tools.
  - A modern, Debian-based Linux distribution
   - Debian Buster (10.0) and onwards
   - Ubuntu 20.04 LTS and onwards
-  - A text editor with syntax highlighting and spell checking
+  - A text editor with syntax highlighting, word wrap, and spell checking
   - A screenshot tool
  - The following packages from your Linux distribution's repository:
   - `git`

source/1/1.1/retrieving_the_image.rst

@@ -41,13 +41,13 @@ To verify the image, run this from the command line:
 
 .. code:: 
 
- sha256sum lubuntu-24.04-desktop-amd64.iso
+ sha256sum lubuntu-24.10-desktop-amd64.iso
 
 and then carefully check that the output matches 
 
 .. code::
 
-  f7ed99b368e00ab7f3fa2c05cefd912f43fc19a8ab9d4d241432d7d9e97e3491 *lubuntu-24.04-desktop-amd64.iso
+  5c9c3f03ea12566ecec008aef97afa997854674a1a0421d400cf48d819fd953c *lubuntu-24.10-desktop-amd64.iso
 
 Downloading the image via BitTorrent
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -82,6 +82,6 @@ To download the image using zsync run
  
 .. code::
 
-   zsync http://cdimage.ubuntu.com/lubuntu/releases/24.04/release/lubuntu-24.04-desktop-amd64.iso.zsync
+   zsync https://cdimage.ubuntu.com/lubuntu/releases/oracular/release/lubuntu-24.10-desktop-amd64.iso.zsync
    
 **You have now downloaded the image successfully. Please continue to Chapter 1.2.**

source/2/2.1/2.1.1/firefox.rst

@@ -76,6 +76,14 @@ To search for a word in a webpage press :kbd:`Control+F` and then type what you
 
 Firefox offers to save passwords of websites with a popup when you enter in a password and press :guilabel:`Save`. This will have Firefox remember the password so you do not have to remember it. Firefox however stores these in your browser and you can access them from the three bars :menuselection:`Passwords`. To search what sites you have saved logins for type in the :guilabel:`Search Logins` bar at the top. On the left hand side bar lists each saved login for each site and to get to one login left click on the site. Once on a login click the :guilabel:`Copy` button to copy the password to login to a site. To view a password of what you have saved click the :guilabel:`eyeball` button which will show your saved passwords. To hide your password again press the :guilabel:`crossed out eyeball`. To stop storing a login in Firefox press the :guilabel:`Remove` button. To change a saved password you can press the :guilabel:`Edit` button.
 
+IF you have trouble reading a webpage you may want to use reader view. To enter reader view left click on the :guilabel:`paper with lines on it` button to the right of the address bar. This will take out background of the page and sidebars with less things on the page. To Exit reader view press the :guilabel:`x` button to the left of the main text of the page or press the :guilabel:`paper with lines on it` button on the right of the address bar again. 
+
+To change settings with your text in reader view press the :guilabel:`Aa` button on the left sidebar. To change increase text size press the :guilabel:`+` button and conversely press the :guilabel:`-` button. To choose what kind of font to read use the :guilabel:`Font` menu. To choose which weight of font to use use the :guilabel:`Font weight` menu. To change how much width of the screen to take up layout use the :guilabel:`Content width` slider. To change the space between lines change the :guilabel:`Line spacing` slider.
+
+To choose a theme for how to view text in reader view use the :guilabel:`Theme` on the sidebar to the left. The default subtab lets you choose either an :guilabel:`Auto`, :guilabel:`Dark`, :guilabel:`Contrast`, :guilabel:`Light`, :guilabel:`Sepia`, or :guilabel:`Gray` theme by left clicking on the theme. To use a custom theme use the :guilabel:`Custom`tab. To choose the color of your text left click on the :guilabel:`Text` box. To change the background color of your text left click the :guilabel:`Background` menu. To choose which color for unvisited links use the :guilabel:`Unvisited links` menu. To change the color of visited links change the :guilabel:`Visited links` menu. To change what color to highlight text to be read aloud :guilabel:`Highlighter for read aloud` menu. To reset your custom theme to default press :guilabel:`Reset defaults`.
+
+To read text on your webpage aloud use the :guilabel:`read aloud` tab on the left sidebar. To start reading text aloud press the :guilabel:`Play` button. To repeat what is being read press the :guilabel:`back `button with the left pointing arrow. To skip to the next paragraph press the right pointing arrowing or :guilabel:`forward` button. To slow down how fast text is read move the slider towards the :guilabel:`tortoise`. To speed up the rate of the text being read move it towards the :guilabel:`rabbit`. To change which voice you to read text in use the :guilabel:`voice` drop down menu.
+
 Customizing
 -----------
 
@@ -113,7 +121,7 @@ To change how Firefox deals with websites wanting permissions for Location, Came
 
 Version
 ----------
-Lubuntu currently ships with the latest version of Firefox, Firefox 123.
+Lubuntu currently ships with the latest version of Firefox, Firefox 129.
 
 
 How to Launch

source/2/2.1/2.1.3/Quassel_IRC.rst

@@ -18,9 +18,9 @@ To see all the nicknames of someone in a channel are located in a sidebar labele
 
 .. image:: quasselwizard.png
 
-To add the Lubuntu IRC chat network click :menuselection:`File --> Networks --> Configure_Networks`. To add a new network click the :guilabel:`+Add` button. To connect to a common public network :guilabel:`Use preset` dropdown, select :guilabel:`Lubuntu IRC` or any other server you want to join and then press :guilabel:`OK`. To change a name of an IRC network press the :guilabel:`Rename` button type the new name in and press :guilabel:`OK`.
+To add the Lubuntu IRC chat network click :menuselection:`File --> Networks --> Configure_Networks`. To add a new network click the :guilabel:`+Add` button. To connect to a common public network :guilabel:`Use preset` dropdown, select :guilabel:`irc.libera.chat:6667`, :guilabel:`irc.libera.chat:6697` for encrypted irc, or any other server you want to join and then press :guilabel:`OK`. To change a name of an IRC network press the :guilabel:`Rename` button type the new name in and press :guilabel:`OK`.
 
-To join a channel simple type :kbd:`/join 1` (where 1 is the channel name), right click the network and select :menuselection:`Join Channel` or use the :guilabel:`Join` button. To leave a channel right click on the channel name on the right hand side and select :menuselection:`Part` from the context menu or type :kbd:`/part channelname`. If you want to join the channel again after leaving it right click on the channel and select :menuselection:`Join`. To have your chat be hidden until you rejoin it again right click on the channel and select :menuselection:`Hide Chats(s) Temporarily`. To hide the chat forever right click on the channel and select :menuselection:`Hide Chats(s) Permanently`.
+To join a channel simple type :kbd:`/join 1` (where 1 is the channel name), right click the network and select :menuselection:`Join Channel` or use the :guilabel:`Join` button. To join support channel for lubuntu type :kbd:`/join #lubuntu`. To leave a channel right click on the channel name on the right hand side and select :menuselection:`Part` from the context menu or type :kbd:`/part channelname`. If you want to join the channel again after leaving it right click on the channel and select :menuselection:`Join`. To have your chat be hidden until you rejoin it again right click on the channel and select :menuselection:`Hide Chats(s) Temporarily`. To hide the chat forever right click on the channel and select :menuselection:`Hide Chats(s) Permanently`.
 
 To hide all people joining or leaving a chat right click on the channel list :menuselection:`Hide Events --> Joins/Parts/Quits`. To only hide people joining right click on the list of channel list :menuselection:`Hide Events --> Joins`. To hide people parting the channel right click on the channel list :menuselection:`Hide Events --> Parts`. To hide people quitting the channel right click on the channel list :menuselection:`Hide Events --> Quits`. To hide people changing their nickname :menuselection:`Hide Events --> Name Changes`. To hide when someone changes the topic of a channel :menuselection:`Hide Events --> Topic Changes`. To hide people changing the mode of a channel right click on the list of channels :menuselection:`Hide Events --> Mode Changes`. To hide when Quassel tells you it is tomorrow right click on the list of channels :menuselection:`Events --> Day Changes`. However while hiding events may result in less busy traffic it can leave you trying to communicate with people no longer on IRC. To view these events again simply uncheck the checkbox for that event.
 

source/2/2.2/2.2.1/libreoffice.rst

@@ -31,7 +31,7 @@ Screenshot
 
 Version
 -------
-Lubuntu ships with version 24.2.4 of LibreOffice.
+Lubuntu ships with version 24.8.0 of LibreOffice.
 
 How to Launch
 -------------

source/2/2.2/2.2.2/libreoffice_calc.rst

@@ -79,7 +79,7 @@ The :guilabel:`Chart Elements` tab controls labels and displaying legends on you
 
 Version
 -------
-Lubuntu ships with version 24.2.4 of LibreOffice Calc.
+Lubuntu ships with version 24.8.0 of LibreOffice Calc.
 
 How to Launch
 -------------

source/2/2.2/2.2.3/libreoffice_draw.rst

@@ -63,7 +63,7 @@ To print a drawing press :kbd:`Control+P` or :menuselection:`File --> Print`. To
 
 Version
 -------
-Lubuntu ships with version 24.2.4 of LibreOffice Draw.
+Lubuntu ships with version 24.8.0 of LibreOffice Draw.
 
 How to Launch
 -------------

source/2/2.2/2.2.4/libreoffice_impress.rst

@@ -124,7 +124,7 @@ To bring up custom settings for your settings :menuselection:`Slide Show --> Sli
 
 Version
 -------
- Lubuntu ships with version 24.2.4 of LibreOffice Impress.
+ Lubuntu ships with version 24.8.0 of LibreOffice Impress.
 
 How To Launch
 -------------

source/2/2.2/2.2.5/libreoffice_math.rst

@@ -31,7 +31,7 @@ To quit LibreOffice Math press :kbd:`Control+Q`.
 
 Version
 -------
-Lubuntu ships with Version 24.2.4 of LibreOffice Math.
+Lubuntu ships with Version 24.8.0 of LibreOffice Math.
 
 How to Launch
 -------------

source/2/2.2/2.2.6/libreoffice_writer.rst

@@ -144,7 +144,7 @@ To see statistics on your document use the :guilabel:`Statistics` tab. To see ho
 
 Version
 -------
-Lubuntu ships with LibreOffice Writer version 24.2.4.1
+Lubuntu ships with LibreOffice Writer version 24.8.0
 
 How to Launch
 -------------

source/2/2.2/2.2.7/Okular.rst

@@ -1,80 +0,0 @@
-Chapter 2.2.7 Okular
-====================
-Okular is the PDF viewer for Lubuntu 24.04 
-
-Usage
------
-To move the area shown on the screen down press :kbd:`Down arrow` and conversely to move it up use :kbd:`Up arrow`. You can also use the scrollwheel on your mouse to easily move up and down. To go to the next page press :kbd:`right arrow`, :menuselection:`Go --> Next Page`, or press press the downward pointing arrow on the toolbar. To go to the previous page press :kbd:`Up arrow`, :menuselection:`Go --> Previous Page`, or the upward pointing arrow on the toolbar. To see what page you are in is in a box between the button for next and previous page on the toolbar. To the right of this box it shows what page this is :guilabel:`of` the total number of pages of the document. To switch to a particular page type in the box in the center of the toolbar, press :kbd:`control +G`, or :menuselection:`Go --> Go to Page`.
-
-When you first open Okular you can open a file with the :guilabel:`Open Document` button, :menuselection:`File --> Open`, or press :kbd:`Control + O`. If you have a recently opened document it will appear on the right under :guilabel:`Recent Documents` on first opening Okular or :menuselection:`File --> Open Recent`. To clear your recent documents click the :guilabel:`Forget All` button when you first open Okular or :menuselection:`File --> Clear List`. Open Recent -->  To reload your file if something is changed press :kbd:`F5` or :menuselection:`File --> Reload`. To save a PDF :menuselection:`File --> Save` or press :kbd:`Control +S`. To save a file with a separate name :menuselection:`File --> Save As` or press :kbd:`Control + Shift +S`. To print your document press :kbd:`Control + P` or :menuselection:`File --> Print`.  To see info on your file :menuselection:`File --> Properties` or press :kbd:`Alt + Enter`.
-
-.. image:: Okular-first-open.png
-
-To zoom out press the :guilabel:`-` button on the toolbar, press :kbd:`Control + -`, or :menuselection:`View --> Zoom Out`. To zoom in press the :guilabel:`+` button on the toolbar, press :kbd:`Control + +`, or :menuselection:`View --> Zoom in`. To zoom to have the page zoom to have the width fill the whole window :menuselection:` View --> Fit width` or select :menuselection:`Fit Width` next to the :guilabel:`+` and :guilabel:`-`. To zoom to see a full page :menuselection:`View --> Fit Page` or select :menuselection:`Fit Page` next to the :guilabel:`+` and :guilabel:`-` button. To zoom to 100%  :menuselection:`View --> Zoom to 100%`, press :kbd:`Control +0`, or select :menuselection:`100%` on the bar next to the :guilabel:`+` and :guilabel:`-` buttons.
-
-To view pages facing each other like an open book select from :guilabel:`View Mode` :menuselection:`Facing Pages` or :menuselection:`View --> View Mode --> Facing Pages`. To see an open book view with the first page centered select :menuselection:`Facing Pages(center first page)` from :guilabel:`View Mode` or :menuselection:`View --> View Mode --> Facing Pages(center first page)`. To view multiple pages at once select :menuselection:`Overview` from :guilabel:`View Mode` or :menuselection:`View --> View Mode --> Overview`. To switch back to viewing one page select :menuselection:`Single Page` from :guilabel:`View Mode` or :menuselection:`View --> View Mode --> Single Page`. To choose to only view whole pages at once and not scroll to the top and bottom of a page uncheck :menuselection:`View --> View Mode --> Continuous`. To rotate your view to the left :menuselection:`View --> Orientation --> Rotate left`. To rotate your view to the right :menuselection:`View --> Orientation --> Rotate right`. To make your view back to how it was at the start :menuselection:`View --> Orientation --> Original Orientation`. To have a fullscreen view press :kbd:`Control+ Shift+ F` or :menuselection:`View --> Full Screen Mode`.
-
-To have a zoomed in view of your document without margins check the :guilabel:`View --> Trim View --> Trim Margins`. To have your view trimmed to where you select :menuselection:`View --> Trim View --> Trim to Selection`.
-
-To select Text press :kbd:`Control + 4`, :menuselection:`Tools --> Text Selection`, or select :menuselection:`Text selection` from the right of the toolbar. To select an area press :kbd:`Control + 3`, :menuselection:`Tools --> Area Selection`, or select :menuselection:`Area Selection` for the right of the toolbar. To select tables press :kbd:` Control + 5`, :menuselection:`Tools --> Table Selection`, or select :menuselection:`Table Selection` from the right of the toolbar. To switch back to moving the view with mouse :menuselection:`Tools --> Browse`, press :kbd:`Control + 1`, or press the :guilabel:`Browse` button on the toolbar. 
-
-To highlight something in yellow press :kbd:`1` or select :menuselection:`Yellow highlighter` from the drop down of the far right of the toolbar. To highlight in green press :kbd:`2` or select :menuselection:`Green Highlighter` from the menu on the far right of the toolbar. To underline something press :kbd:`3` or select :menuselection:`Underline` from the toolbar on the right. To insert a text note into your file press :kbd:`4` or select :menuselection:`Insert Text` from the menu on the right of the toolbar. Then you can click where you want the note and a window will popup you enter your text into. To insert a note inline and not have it be over text making it illegible press :kbd:`5` or select :guilabel:`Inline Note` from the right of the toolbar. Then left click on where you want the note and type the note in the yellow pop up. To have a pop up note press :kbd:`6` or select pop up note from the toolbar on the right. The left click where you want the note and type in the note as you want.
-
-.. image:: Okular-annotation.png
-
-To undo an annotation press :kbd:`Control +Z` or :menuselection:`Edit --> Undo`. To redo something you undid press :kbd:`Control + Shift +Z` or :menuselection:`Edit --> Redo`. To select all press :kbd:`Control + A` or :menuselection:`Edit --> Select All`. To select all text on a current page :menuselection:`Edit --> Select All Text on Current Page`. To copy something you have selected press :kbd:`Control + C` or :menuselection:`Edit --> Copy`.
-
-On the left side of the window Okular has a sidebar. The leftmost tab has thumbnails of the pages of your document. The shaded part of the thumbnail shows the part of the page that is displayed. At the bottom of the thumbnail is a page number. To switch to a page with the sidebar left click on that page. The middle tab of the sidebar shows annotation. To search through your annotations look into :guilabel:`Search` bar. To have the page shown in the tree of what press the leftmost button on the bottom that looks like a page. To show who made the comment press the button that looks like a person. To jump to an annotation simply left click on it. To open all annotation press the downward pointing arrow on the bottom right. To collapse all annotations press the upward pointing arrow. The third tab of the sidebar shows your bookmarks. To hide bookmarks for other files uncheck :guilabel:`Show for all Documents` checkbox. To search your bookmarks enter in the :guilabel:`Bookmarks` bar. To open your bookmark double left click on it. To add a bookmark left click on the :guilabel:`Add Bookmark` button on the bottom. To remove a bookmark on the bottom left click on the :guilabel:`Remove Bookmark` button. The rightmost tab only shows up if your document has it is a Contents tab. To search through your contents type in the :guilabel:`Search` bar. To go to the part of the section of the table of contents simply left click on it. 
-
-To search through your document press :kbd:`Control + F` or :menuselection:`Edit --> Find`. To type in the bar in the bottom what you want to search for. To get to the next result press :kbd:`F3`, the :guilabel:`Find` button on the bottom, or :menuselection:`Edit --> Find Next`. To go to your previous search result press :kbd:`Shift + F3`, the :guilabel:`Previous` button on the bottom, or :menuselection:` Edit --> Find Previous`. To make searching case sensitive press the :guilabel:`Options` button and check the :menuselection:`Case sensitive` checkbox. To start searching at your current page left click on the :guilabel:`Options` button and check the :menuselection:`From current page` checkbox. To start searching as you type press the :guilabel:`Options` button and check the :menuselection:`Find as you type` checkbox. To close find press the :guilabel:`x` button.
-
-.. image:: okular-find.png
-
-To go all the way to the beginning press :kbd:`Control + Home` or :menuselection:`Go --> Beginning of Document`. To go all the way to the end of the document :kbd:`Control + End` or :menuselection:`Go --> End of Document`. To go back after changing pages :menuselection:`Go --> Back`. 
-
-Then to go forward from where you were :menuselection:`Go --> Forward`. To show a magnifier for Okular press :kbd:`Control +6` or :menuselection:`Tools --> Magnifier`. Then left click over where you want to have magnified. To zoom on a particular area press :kbd:`Control+6` or :menuselection:`Tools --> Zoom`. The left click and select which area you want to zoom in on. To zoom back out right click.
-
-To switch to a presentation view press :kbd:`Control + Shift + P` or :menuselection:`View --> Presentation`. To get out of presentation mode press :kbd:`Escape` or move the mouse to the top right corner and left click the quit button. To go forward a slide press :kbd:`Right arrow` or scrolling down with the mousewheel. To go to the previous slide press :kbd:`Left arrow` or scrolling up with the mousewheel. To go to the first slide press :kbd:`Home` and the last slide by pressing :kbd:`End`. 
-
-To view a toolbar on your presentation move the mouse to the top of the screen. The toolbar can go to the previous slide with the left pointing arrow and the next slide with the right pointing arrow. To go to a particular slide type the page number in the box. To autoadvance slides press the play button. To pause autoadvancing slide press the pause button. To draw on your presentation left click on the color you want to draw with left click on that color and then left click to draw using the mouse. To erase your drawing press the eraser button. To entirely erase a drawing press the trash can button. To show which screen to display the presentation on press the screen button and select your screen.
-
-Version
--------
-Lubuntu ships with version 23.08.4 of Okular.
-
-How to Launch
--------------
-
-To launch Okular :menuselection:`Internet --> Okular` or run 
-
-.. code::
-
-   okular
-   
-from the command line.
-
-Customizing
------------
-To Configure Okular press :kbd:`Control + Shift + ,` or :menuselection:`Settings --> Configure Okular`. The :guilabel:`General` tab has settings for files and how to display things. To use smooth scrolling check the :guilabel:`Use smooth scrolling` checkbox. To hide scrollbars on Okular uncheck the :guilabel:`Show scrollbars` checkbox. To have clicking on thumbnails of a page link to that page check the :guilabel:`Link the thumbnails with the page` checkbox. To hide the hints and info messages uncheck the :guilabel:`Show hints and info messages` checkbox. To have notifications about embedded files forms or signatures check the :guilabel:`Notify about embedded files, forms, or signatures` checkbox. To show the document title in the window titlebar check the :guilabel:`Display document title in titlebar if available` checkbox. To choose what to do when you don't have a document title use the :guilabel:`When not displaying document title` drop down menu. To choose a custom background color check the :guilabel:`Use custom background color` checkbox. Then left click on the to the right to pick your background color.
-
-.. image:: Okular-config-general.png
-
-To have tabs for opening new files check the :guilabel:`Open new files in tabs`. checkbox. To switch to an existing tab if the file is already open check the :guilabel:`Switch to existing tab if file is already open` checkbox. To not obey DRM limitations uncheck the :guilabel:`Obey DRM limitations` checkbox. To reload a file if the file changes check the :guilabel:`Reload on file change` checkbox. To display right to left text check the :guilabel:`Right to left reading direction` checkbox. To not load in continuous view by default uncheck the :guilabel:`Open in continuous mode by default` checkbox. To choose your default zoom change the :guilabel:`Default zoom` field.
-
-The :guilabel:`Accessibility` tab has settings making this easier to read. To draw borders around links check the :guilabel:`Draw borders around links` checkbox. To change how the colors appear check the :guilabel:`Change colors` checkbox. To change how the colors appear use the :guilabel:`Color mode` menu.
-
-.. image:: Okular-accessibility.png
-
-To change how Okular performs use the :guilabel:`Performance` tab. To use less CPU uncheck the :guilabel:`Enable transparency effects` checkbox. To change how much memory Okular uses change the :guilabel:`Memory usage` menu. To enable text antialiasing for Okular check the :guilabel:`Enable text antialias` checkbox. To have antialiasing on the graphics check the :guilabel:`Enable graphics antialias` checkbox. To have font hinting in the text check the :guilabel:`Enable text hinting` checkbox.
-
-.. image:: Okular-performance.png
-
-To have settings for your presentation use the :guilabel:`Presentation` tab. To have your slides advance automatically check the :guilabel:`Advance automatically` checkbox. To change soon to change slides change the drop down to the right of :guilabel:`Advance automatically`. To choose the color of your background choose from the :guilabel:`Background color` field. To change the transition of Okular use the :guilabel:`Default transition` menu. To choose which screen to present on by default use the :guilabel:`Preferred Screen` menu. 
-
-.. image:: Okular-Presentation.png
-
-To change settings for Annotations in Okular sue the :guilabel:`Annotations` tab. To switch how many things to be on the annotations toolbar use the :guilabel:`Annotation toolbar` menu. To change your name for annotations change the :guilabel:`Author` field. To make a custom new annotation press the :guilabel:`Add button`. To change an existing annotation press the :guilabel:`Edit` button. To delete and annotation press the :guilabel:`Remove` button. To move an annotation down press the :guilabel:`Move Down` button. To move an annotation back up press the :guilabel:`Move Up` button.
-
-.. image:: Okular-annotations-pref.png
-
-

source/2/2.2/2.2.7/qpdfview.rst

@@ -0,0 +1,121 @@
+Chapter 2.2.7 qpdfview
+======================
+
+qpdfview is the default PDF viewer for Lubuntu.
+
+Features:
+ - Tabs
+ - Presentation mode
+ - Zoom to entire page/ page width
+ - Rotating pages
+ - Outline, properties, thumbnail, and bookmark docks
+ - Printing support
+ - Annotation and highlighting 
+ - Bookmarks
+ - Customizable keyboard shortcuts
+ - Viewing postscript files
+
+Usage
+------
+To open a PDF file use :menuselection:`File --> Open` or press :kbd:`Control + O` on the keyboard. If you have a PDF open use :menuselection:`File --> Open in new tab` from the menu, click the Open in new tab button or press :kbd:`Control + T`. To refresh a PDF click the Refresh button, :menuselection:`File --> Refresh`, or press :kbd:`F5` just like most web browsers. To switch between tabs on the keyboard you can press control :kbd:`control + tab` or :menuselection:`Tabs --> Next Tab` to go the next tab or :kbd:`control + shift + tab` or :menuselection:`Tabs --> Previous Tab` to cycle through your tabs in the opposite direction. At the bottom of the tab menu will be a list of all your tabs you have open with the title of each document. To close the tab press the red X button on the tab or press :kbd:`Control +W`. To close all tabs on qpdfview press :kbd:`Control + Shift +W`. To restore the most recently closed tabs press :kbd:`Alt+Shift+W` or :menuselection:`Restore most recently closed tab`. To view a menu with your recently closed tab :menuselection:`Tabs --> Recently Closed` and select the file you want. To see a list of all your tabs in a menu they are at the bottom of the :menuselection:`Tabs` menu.
+
+If you want a second copy of a PDF file open right click on the tab and :menuselection:`Open copy in new tab`. If you want a copy of the current PDF on the tab and select :menuselection:`Open copy in new window`. To open your file manager in the current directory right click on the tab and :menuselection:`Open containing folder`. To one PDF file on the left and another on the right click on the tab bar and select :menuselection:`Split view horizontally` and then select the PDF you want to open beside the other tab. To have one PDF file on top of another right click and select :menuselection:`Split view vertically` and select which PDF you want one of top of the other. To switch between which PDF you are able to change pages of simply move the mouse over that PDF. To close go back to only one PDF file per tab right click on the tab and select :menuselection:`Close current view`.
+
+To close all tabs right click on the tab bar and :menuselection:`Close all tabs`. To Close all tabs but that one you right click on right click on a tab and :menuselection:`Close all tabs but this one`. To close all tabs to the right of the one you right click right click on a tab and :menuselection:`Close all tabs to right`. To close all tabs to the left right click on a tab and :menuselection:`Close all tabs to left`. To reorder your tabs left click and drag the tab where you want it in the order.
+
+.. image:: qpdfview-tab-context.png
+
+If you want to view a particular page select the box (e.g. page 1/3) in towards the top left corner and type the page number (e.g. page 3/3). To move to the previous and next page press the :kbd:`left arrow` and :kbd:`right arrow` buttons respectively. Scrolling with the mousewheel past the end or beginning of a page will also change the page. Another way to move to the next page is to press :kbd:`spacebar` or :menuselection:`Edit --> Next page`. Another way to go to the previous page is pressing :kbd:`Backspace` or :menuselection:`Edit --> Previous page`.  Another way to jump to a particular page is to press :kbd:`control + j` or :menuselection:`Edit --> Jump to page`. To go back to page which you have just come from press :kbd:`control + enter` or :menuselection:`Edit --> Jump backward`. To jump forward a page press :kbd:`control + shift + enter` or :menuselection:`Edit --> Jump forward`. To move to the last page of the PDF press the :kbd:`End` key or :menuselection:`Edit --> Last Page`. To move to the first page of the PDF press the :kbd:`Home` key or :menuselection:`Edit --> First page`.
+
+To select text or an image from qpdfview press :kbd:`control+c` or :menuselection:`Edit --> Copy to clipboard`. Then the cursor will turn into a crosshair and you will be able to expand a box to select either text or an image and a menu to select copying the text, selecting the text, copying the image, or saving the image to file. Another way to copy text is to press :kbd:`Shift + Left Click`.
+
+To save your PDF file is to :menuselection:`File --> Save` or you can press :kbd:`Control + s`. You can save the file with a different name with :menuselection:`File --> Save as`. To save a copy of the document click :menuselection:`File --> Save a copy`. If the next time you want to open a PDF to a specific page as first page right click :menuselection:`Set first page`. :menuselection:` If you want to quit qpdfview press :kbd:`Control+Q`.
+
+To view both the bottom of one page and the top of another page press :kbd:`Control+7` or :menuselection:`View --> Continuous`. To view two pages at once like if you want to see a two page spread of an illustration in a PDF of a book press :kbd:`Control + 6` or :menuselection:`View --> Two pages`. To get your view back to normal press :kbd:`Control +6` again or :menuselection:`View --> Two pages` again. To view the first page as a separate title page and then two pages side by side press :kbd:`Control+5` or :menuselection:`View --> Two pages with title page`. To toggle the view of three pages at a time press :kbd:`Control +4` or :menuselection:`View --> Multiple pages`. To view right to left languages on qpdfview press :kbd:`Control +Shift +R` or :menuselection:`View --> Right to left`. To view the fonts embedded in the PDF :menuselection:`View --> Fonts`.
+
+To search through your PDF file you can press :kbd:`control + f` or from the menu :menuselection:`Edit --> Search`. You will get taken to the results and will appear highlighted in yellow to see through the results you can press the down arrow, right click :menuselection:`Find next`, or press :kbd:`F3` to see results farther in the document and press the upward pointed arrow button, right click :menuselection:`Find previous`, or press :kbd:`Shift +F3` to see results towards the start of the document. To exit the search dialog press :kbd:`Escape`, the :guilabel:`Octagon button`, right click :menuselection:`Cancel search`, or :menuselection:`Edit --> Cancel search`. If you want searches to match case check the :guilabel:`Match case` checkbox. To match entire words check the :guilabel:`Whole words` checkbox. To highlight all matches of words check the :guilabel:`Highlight all` checkbox.
+
+.. image:: qpdfview-search-bar.png
+
+To make qpdfview fullscreen you can press :kbd:`f11` or :menuselection:`View --> Fullscreen`.
+
+To make an annotation press :kbd:`Control +A` or :menuselection:`Edit --> Add annotation`. To view the annotation you have made or edit it again press click on what looks like a sticky note with a pin in it. To remove your annotation right click on the annotation and click :menuselection:`Remove annotation`. If you just want to highlight something right click on the text and select :menuselection:`Add highlight` text.
+
+To select page width in zoom in qpdfview is a drop down menu with page width to show the width of the page on qpdfview, :menuselection:`View --> Fit to page width`, or press :kbd:`Control +9`. To view the whole page on qpdfview in this drop down menu select whole page, :menuselection:`View --> fit to page size`, or press :kbd:`Control + 8`. To return to the original zoom press :kbd:`Control + 0` or :menuselection:`View --> Original size`. To zoom in is press the magnifying glass with a + in it or press :kbd:`Control + +` or :menuselection:`View --> Zoom in`. To zoom out press the magnifying glass button with a - in it or press :kbd:`Control + -` or :menuselection:`View --> Zoom out`. To rotate the file to the left is press :kbd:`Control + Left arrow` or :menuselection:`View --> Rotate Left`. To rotate the file to the right is press :kbd:`Control + Right arrow` or :menuselection:`View --> Rotate Right`. Another way to rotate is to hold :kbd:`Shift` and then use the mousewheel. Another way to zoom with the scrollwheel is to hold :kbd:`Control` and zoom with the mousewheel.
+
+To view a list of all tabs you have open you can select them by the title of the PDF by the bottom of the :guilabel:`Tabs` menu.
+
+If you have a particularly long PDF file you might want to make a bookmark to find a specific thing easily. To create a bookmark press :kbd:`control +b` or  :menuselection:`Bookmarks -->  Add Bookmark` and give the bookmark a memorable title and description so you can find it in this document again easily. If you later want to remove the bookmark go :menuselection:`Bookmarks --> Remove bookmark` or press :kbd:`control+ shift+ B`.
+
+Screenshot
+----------
+.. image:: qpdfview.png
+
+Docks
+-----
+qpdfview also includes some very useful docks. To view the outline dock, in the menu select :menuselection:`View --> Docks --> Outline (make sure the button is checked)` or press :kbd:`F6` on the keyboard. It should appear on the left hand side of the PDF with collapsible sections and to expand or collapse each section left click on the :menuselection:`-->`. To go to a particular part of the outline double click on that part of the outline. To see the entire outline right click on the outline and select :menuselection:`Expand all`. To have your outline back to the original state right click on it and select :menuselection:`Collapse all`. This is useful in navigating large PDFs.
+
+.. image:: qpdfview-outline.png
+
+To view properties of your PDF file press :kbd:`F7` or :menuselection:`View --> Docks --> Properties`. To see a thumbnail of each page :menuselection:`View --> Dock --> Thumbnails` or press :kbd:`F8` to view a thumbnail of each page of the PDF file. If you want to close one of these docks click the X button on the dock to close it. To detach a dock to its own floating window press the diamond button to detach it. To get the dock back to where it was press the diamond button again.
+
+.. image:: properties-dock.png
+
+Presentation
+-------------
+To enter presentation mode you can press :kbd:`f12` or :menuselection:`View --> Presentation` which makes the content of the PDF take up the fullscreen and gives you no menubars or toolbars. To exit presentation mode you can press :kbd:`f12` again. To advance to the next page in the presentation press the :kbd:`spacebar` or the :kbd:`right arrow`. To go back a page in presentation press the :kbd:`left arrow`. To exit the presentation press :kbd:`escape`. To go to the first page of the presentation press the :kbd:`Home` key. To go to the last page of the presentation press the :kbd:`End` key.
+
+Printing
+--------
+
+To print your PDF press :kbd:`Control + P` or :menuselection:`File --> Print`. To change what printer you use use the :guilabel:`Name` drop down to select the name of the printer. To see more options press the :guilabel:`Options >>` button to see more options when you print. To select which pages to print use the :guilabel:`Pages from` button and then the fields for the first page to print and then the last page to print. To change what pages you print and type the page number in use the :guilabel:`Pages` field. To print your current page press the :guilabel:`Current Page` button. To change how many copies you print change the :guilabel:`Copies` field.
+
+.. image:: qpdfview-print.png
+
+If you are printing the PDF in black and white you can however  toggle previewing  the file in black and white by pressing :kbd:`Control + U` or :menuselection:`View --> Convert to grayscale`. To invert the colors of your PDF press :kbd:`Control +I` or :menuselection:`View --> Invert Colors`. To trim the margins off your PDF file press :kbd:`control +Shift +U` or :menuselection:`View --> Trim margins`. If you want to turn off changed colors or trimmed margins off press or use the menu in the same thing again.
+
+Customizing
+-----------
+To add your own settings to qpdfview you can get to a settings window with :menuselection:`Edit --> Settings`. To change how qpdfview uses links or manages tabs left click on the :guilabel:`Behavior` tab. The checkbox :guilabel:`Open URL` allows you to turn on or off Opening URLs or links within qpdfview. The :guilabel:`Auto-refresh` checkbox reloads the PDF whenever the file changes which is useful for authoring PDF files. To have qpdfview keep track of recently check the :guilabel:`Track recently used` checkbox. To keep track of recently closed documents check the :guilabel:`Keep recently closed` checkbox. To open the tabs you had open last time with qpdfview the next time you open the program check the :guilabel:`Restore tabs` checkbox. To restore bookmarks after qpdfview is closed check the :guilabel:`Restore bookmarks` checkbox. To have per file settings restored each time you open qpdfview check the :guilabel:`Restore per-file settings` checkbox. To change the page in the main view in addition with the presentation check the :guilabel:`Synchronize presentation` checkbox. To change what screen you use for presentations change the :guilabel:`Presentation Screen` field to the number of the screen you want to use.  To have your outline dock follow what section you  are viewing check the :guilabel:`Synchronize outline view` checkbox. If you want to scroll once to change an entire page check the :guilabel:`Minimal scrolling` checkbox. To change the color of highlights type a hex number for a color or select one from the :guilabel:`Highlight Color` drop down menu.
+
+.. image:: qpdfviewprefrences.png
+
+If you want to reset these settings to the defaults is to press the :guilabel:`Defaults` button. If you just want defaults on the current tab you can press the :guilabel:`Defaults on current tab` button. If you want to return to viewing your PDF with the same settings press the :guilabel:`OK` button. If you wish to discard your changes press the :guilabel:`Cancel` button.
+
+To deal with settings on graphics press press on the :guilabel:`Graphics` tab. To toggle having a small decoration showing where different pages are check the :guilabel:`Decorate pages` checkbox. To toggle having a red border around hyperlinks check the :guilabel:`Decorate links` checkbox. To toggle having a blue borders around fillable forms in a PDF check the :guilabel:`Decorate form fields` checkbox. The settings for paper color will has a drop down menu for previewing what it is like printing on colored paper. The checkbox :guilabel:`Prefetch` will preload pages not directly viewed by the PDF viewer not directly on the screen however this will use more resources. The drop down for :guilabel:`Cache size` will increase loading speed but will use more resources. The :guilabel:`Prefetch` checkbox loads pages before you view them. The :guilabel:`Prefetch distance` tells you how many pages away from where you are to load. The field for :guilabel:`Presentation background color` sets the color of the background for presentations. The :guilabel:`Cache size` menu increases the size of the cache which will apply more system resources to run heavy PDFs with hundreds of pages of full color artwork.
+
+.. image:: qpdfview-graphics.png
+ 
+The :guilabel:`PDF` subtab of the graphics tab has settings for font and paper color for viewing PDF files. To antialias images check the :guilabel:`Antialiasing` checkbox. To antialias text check the :guilabel:`Text antialiasing` checkbox. To use font hinting to view text easier to view change the :guilabel:`Text hinting` menu to Reduced or full. To not change the background color with change the :guilabel:`Ignore paper color` checkbox. To change how qpdfview draws thin lines change the :guilabel:`Thin line mode` drop down menu. 
+
+.. image:: Graphic_PDF_subtab.png
+
+The :guilabel:`PS` subtab manages how Postscript files appear on the screen. To change how many bits are used for antialiasing graphics change the :guilabel:`Graphics antialias bits` field. To change the number of bits of text antialiasing change :guilabel:`Text antialiasing bits` field.
+
+.. image:: graphics-postscript.png
+
+To change the interface settings click on the :guilabel:`Interface` tab. If you want the tabs to be spread out press the spread tabs checkbox. The :guilabel:`Tab position` changes where the tabbar on the window. The :guilabel:`Tab visibility` menu can be set to as needed, always or never which will show or hide the tabbar. The checkbox for :guilabel:`New tab next to current tab` opens new tabs next to the current one. The field :guilabel:`Recently used count` lets you set the maximum number of files to keep around in recently used. The :guilabel:`Spread tabs` checkbox spreads the tabs to take up the whole tab bar and they get smaller the more tabs you open. To have qpdfview close when the last tab in qpdfview is closed check the :guilabel:`Exit after last tab` checkbox. To change the number of recently used PDF files in the menu change the :guilabel:`Recently used count` field. To change how many recently closed tabs of PDFs are shown change the :guilabel:`Recently closed count` field. To toggle showing the current page in the window title check the :guilabel:`Current page in window title`.
+
+.. image:: qpdfview-interface.png
+
+The :guilabel:`Shortcuts` tab provides the ability to customize keyboard shortcuts. The :guilabel:`Action` column is what each keyboard shortcut does. The :guilabel:`Key sequence` column shows the keyboard shortcut. Double click in the key sequence column and type in your desired keyboard shortcut to change the keyboard shortcut.
+
+.. image:: qpdfview-shortcuts.png
+
+The :guilabel:`Modifiers` tab allows you to change settings with the mouse and certain keyboard shortcuts in combination with the mouse. To change what keyboard shortcut to hold down while you hold down your mousewheel to zoom use the :guilabel:`Zoom` drop down menu. To change what keyboard key to hold down before using the mousewheel use the :guilabel:`Rotate` key. To change what key to press when you copy text to the clipboard when also pressing a mouse button use the :guilabel:`Copy to Clipboard` drop down menu. To switch which key you press when left clicking to add an annotation use the :guilabel:`Add annotation` drop down menu. To change what what you press to while left clicking to zoom to a selection change the :guilabel:`Zoom to Selection` drop down menu.
+
+.. image:: qpdfview-modifiers.png
+
+Version
+-------
+Lubuntu ships with version 0.5.0 of qpdfview.
+
+How to Launch
+-------------
+To launch qpdfview go to the Menu :menuselection:`Office --> qpdfview` or run 
+
+.. code:: 
+
+   qpdfview 
+
+from the command line. The icon for qpdfview looks like an eye with a blue background.

source/2/2.2/Office_Applications.rst

@@ -13,4 +13,4 @@ This chapter documents office applications including the LibreOffice office suit
   2.2.4/libreoffice_impress
   2.2.5/libreoffice_math
   2.2.6/libreoffice_writer
-  2.2.7/Okular
+  2.2.7/qpdfview

source/2/2.3/2.3.1/lximage-qt.rst

@@ -68,7 +68,7 @@ The :guilabel:`Shortcuts` tab has settings for changing keyboard shortcuts in LX
 
 Version
 -------
-Lubuntu ships with version 1.40 or LXImage-Qt. 
+Lubuntu ships with version 2.0.1 or LXImage-Qt. 
 
 How to Launch
 -------------

source/2/2.3/2.3.2/screengrab.rst

@@ -21,7 +21,7 @@ Screenshot
 
 Version
 -------
-Lubuntu ships with version 2.7.0 of ScreenGrab.
+Lubuntu ships with version 2.8.0 of ScreenGrab.
 
 How to Launch
 -------------

source/2/2.4/2.4.1/lxqt-archiver.rst

@@ -25,7 +25,7 @@ To close LXQt File Archiver press :kbd:`Control+Q`.
 
 Version
 -------
-Lubuntu ships with version 0.9.1 of LXQt File Archiver.
+Lubuntu ships with version 1.0.0 of LXQt File Archiver.
 
 How To Launch
 -------------

source/2/2.4/2.4.10/Kvantum-Manager.rst

@@ -0,0 +1,51 @@
+Chapter 2.4.10 Kvantum Manager
+===============================
+
+Kvantum Manager customizes your Qt style.
+
+Usage
+-----
+The :guilabel:`Install/ Update Theme` lets you install an external theme and use it. To select a folder for this theme press the :guilabel:`Select a Kvantum theme folder` or type the path in the bar next to this. To install the theme press the :guilabel:`Install this theme` button. 
+
+.. image:: kvantum-install-update-theme.png
+
+To preview the way the current theme looks press :guilabel:`Preview` button. After this a window will let you interact with all the different elements in your theme in several tabs to see how different window elements will look. To view interactive help about something press the :guilabel:`Help`. To Quit Kvantum manager press the :guilabel:`Quit` button.
+
+To change your theme use the :guilabel:`Change/Delete Theme` tab. To select a theme you can search for one by name typing next to :guilabel:`Select a theme` or press the drop down button to select this theme. Then to apply it press the :guilabel:`Use this theme` button. To delete a theme press the :guilabel:`Delete this theme` button.
+
+.. image:: change-delete-theme.png
+
+To change settings for your current theme use the :guilabel:`Configure Active Theme` tab. To change small things about your theme use the :guilabel:`Hacks` subtab. To have Dolphin be transparent add :guilabel:`Transparent Dolphin view` checkbox. To have the side pane of pcmanfm-qt be transparent use the :guilabel:`Transparent sidepane for PCManFm-Qt` checkbox. To have PCManFM-qt be transparent check the :guilabel:`Transparent view for PCManFM-Qt` checkbox. To blur transparent windows check the :guilabel:`Blur explicitly translucent windows` checkbox. To not blur inactive windows check the :guilabel:`No blurring for inactive windows` checkbox. To have Kvantum make dark themes for applications that don't want to use a dark theme check the :guilabel:`Respect dark themes` checkbox. To make grabbing grips as big as possible check the :guilabel:`Force size grips` checkbox. To jump your scrolling with a middle click check the :guilabel:`Scroll jump with middle click` checkbox. 
+
+.. image:: hacks-subtbab.png
+
+To use a normal weight font for push buttons check the :guilabel:`Normal font for default push buttons` checkbox. To not use icon on push buttons check the :guilabel:`Iconless push buttons` checkbox. To not use icon for menus check the :guilabel:`Iconless menus` checkbox. To style only the top toolbar check the :guilabel:`Single top toolbar checkbox`. To not tint icons when you select them check the :guilabel:`No selection tint` checkbox. To center text in form check the :guilabel:`Centered form layouts` checkbox. To avoid bugs with scaling a non integer amount and transparency check the :guilabel:`Disable translucency with non-integer scaling` checkbox. To change how much to tint icons when you mouseover them change the :guilabel:`Tint label icons on mouseover by` field. To change how opaque to make disabled icons change the :guilabel:`Opacity of disabled icons` field. To change the size of the LXQt main menu icon size use the :guilabel:`LXQt main menu icon size` field.
+
+To change composting settings use the :guilabel:`Composting & General Look` tab. To disable compositing use the :guilabel:`Disable composite effects` checkbox. To blur menus and tooltips use the :guilabel:`Blurring for menus and tooltips` checkboxes. To choose the radius of blurring on menus use the :guilabel:`Menu` field. To choose how much to blur tooltips use the :guilabel:`Tooltip` field. To have menus without shadows and use the :guilabel:`Shadowless menus and tooltips` checkbox. To choose to have windows be translucent use the :guilabel:`Translucent windows` checkbox. To choose to have certain windows opaque list them separated with commas in :guilabel:`Opaque apps` field. To choose how much to reduce windows by use :guilabel:`Reduce window opacity by` field. To choose how transparent to make menus use the :guilabel:`Reduce menu opacity by` field. To choose to blur translucent windows use the :guilabel:`Blurring for translucent windows` checkbox. To have a fading animation if the state of something changes on mouseover check the :guilabel:`Animation for state change under mouse` checkbox. To have inactive windows appear the same as your active windows check the :guilabel:`Ignore inactive state` checkbox. To always show scrollbars uncheck the :guilabel:`Transient scrollbars` checkbox. To change which contrast in ui elements use the :guilabel:`Contrast` field. To change how much color intensity on each ui change the :guilabel:`Intensity` field. To change how saturated colors on ui are change the :guilabel:`Saturation` field.
+
+.. image:: compositing-general-subtab.png
+
+To choose the sizes for various part of user interfaces and how long for things to delay use the :guilabel:`Size & Delays` subtab. To change the size of small icons use :guilabel:`Small icon` field. To change the size of large icons use the :guilabel:`Large icon` field. to change the size of button icons use the :guilabel:`Button icon` field. To change the size of toolbar icons use the :guilabel:`Toolbar icon` field. To change how much spacing on the layout use the :guilabel:`Layout spacing` field. To changes the margins of layout use the :guilabel:`Layout margin` field. To choose how much to have a submenu overlap with the parent menu use the :guilabel:`Submenu overlap` field. To choose how big to make a spin button change the :guilabel:`Spin button width` field. To choose the minimum length of a scrollbar change the :guilabel:`Minimum scrollbar length` field. To choose how long to delay adding a tooltip change the :guilabel:`Tooltip delay` field. To choose how long to delay showing a submenu use the :guilabel:`Submenu delay` field. 
+
+.. image:: sizes-delay-subtab.png
+
+The :guilabel:`Miscellaneous` tab has other settings for how applications appear. To have + and - buttons be drawn inline check the :guilabel:`Inline spin indicators` checkbox. To have + and - buttons be shown vertically check the :guilabel:`Vertical spin indicators`. To have your combo boxes be editable inline check the :guilabel:`Editable combo as line edit` checkbox. To have combo popups be shown as menus check the :guilabel:`Combo popup as menu` checkbox. To have combo boxes be a list of radio buttons uncheck :guilabel:`non-checkable combo menu` checkbox. To choose to have tabs aligned to the left by default check the :guilabel:`Left aligned tabs` checkbox. To have inactive tabs have no borders check the :guilabel:`Join inactive tabs` checkbox. To hide arrows on scrollbars check the :guilabel:`No arrows for scrollbars` checkbox. To draw scrollbars inside frames check the :guilabel:`Scrollbars inside frames` checkbox. To hide a rectangle showing where you are currently focusing with the mouse check the :guilabel:`Remove focus rectangles` checkbox. To have large menus be scrollable check the :guilabel:`scrollable menus` checkbox.
+
+.. image:: misc-subtab.png
+ 
+To group labels above frame check the :guilabel:`Group-box label above frame` checkbox. To fill rectangles when you highlight something check the :guilabel:`Fill rubber band rectangles` checkbox. To turn off mouse tracking for menus uncheck the :guilabel:`Mouse tracking for menubars` checkbox. To have the menubar and toolbar drawn together check the :guilabel:`Merge menubar with toolbar` checkbox. To group buttons on your toolbar check the :guilabel:`Group toolbar buttons` checkbox. To have your menu shortcuts with you can press with alt check the :guilabel:`Underline shortcuts with Alt` checkbox. To choose what to do when you click use the :guilabel:`Click behavior` menu. To choose how applications without a style change the :guilabel:`Toolbutton style` menu. To have a dialog buttons are laid out use the :guilabel:`Dialog button layout` drop down. To choose where you can drag items from use the :guilabel:`Drag from` drop down menus. To allow dragging things from buttons check the :guilabel:`Allow dragging from buttons` checkbox.
+ 
+To save your changes to your theme press the :guilabel:`Save` button. To change back to how your application themes were before press the :guilabel:`Restore` button.
+
+To choose to launch a particular application in a certain theme use the :guilabel:`Application Themes` tab. To choose which theme to launch a particular application in select the theme under :guilabel:`Installed Theme`. Then list which applications you want the theme to be in in the :guilabel:`Application(s)` field. To clear what applications you have in a list press the :guilabel:`Remove List` button. To save your current list of applications to be launched with a theme press the :guilabel:`Save` button.
+
+.. image:: application-themes.png
+
+Version
+-------
+Lubuntu ships with version 1.1.2 of Kvantum Manager.
+
+How to Launch
+--------------
+
+To launch Kvantum Manager from the menu :menuselection:`Accessories --> Kvantum Manager` or :menuselection:`Preferences --> LXQt Settings --> Kvantum Manager`. You also can launch Kvantum Manager from clicking :guilabel:`Kvantum Manager` from LXQt configuration center.

source/2/2.4/2.4.2/Featherpad.rst

@@ -33,7 +33,7 @@ If you have multiple copies of the same file open in FeatherPad it will be open
 
 To make text in FeatherPad bigger press :kbd:`Control+ +` or hold :kbd:`Control` and move the mousewheel up. To make text in FeatherPad smaller press :kbd:`Control+ -` or hold :kbd:`Control` and move the mousewheel down. To reset the zoom press :kbd:`Control+ 0`.
 
-If you want to close all tabs to the left right click on the tab bar :menuselection:`Close Previous Tabs`. To close all tabs to the right right click on the tab bar :menuselection:`Close Next Tabs`. To only leave open the tab you right clicked on right click and select :menuselection:`Close Other Tabs`. To copy the file name right click on the tab bar and select :menuselection:`Copy File Name`. To copy the path to the file you have open right click on the tab bar and select :menuselection:`Copy File Path`. To reorder your tabs left click and drag the tab to where you want it. To open the folder the file is in a fire manager right click and select :menuselection:`Open Containing Folder`.
+To see how many tabs you have open right click on a tab and then will show :menuselection:` x pages` on the menu. If you want to close all tabs to the left right click on the tab bar :menuselection:`Close Previous Tabs`. To close all tabs to the right right click on the tab bar :menuselection:`Close Next Tabs`. To only leave open the tab you right clicked on right click and select :menuselection:`Close Other Tabs`. To copy the file name right click on the tab bar and select :menuselection:`Copy File Name`. To copy the path to the file you have open right click on the tab bar and select :menuselection:`Copy File Path`. To reorder your tabs left click and drag the tab to where you want it. To open the folder the file is in a fire manager right click and select :menuselection:`Open Containing Folder`.
 
 .. image:: featherpad-tab-context.png
 
@@ -114,7 +114,7 @@ To change what colors you use in syntax highlighting use the :guilabel:`Syntax C
 
 Version 
 -------
-Lubuntu ships with version 1.4.1 of FeatherPad. 
+Lubuntu ships with version 1.5.1 of FeatherPad. 
 
 How to Launch
 -------------

source/2/2.4/2.4.3/Kcalc.rst

@@ -93,7 +93,7 @@ To customize your shortcuts for KCalc :menuselection:`Settings --> Keyboard Shor
 
 Version
 -------
-Lubuntu ships with version 23.08.4 of KCalc.
+Lubuntu ships with version 24.08.0 of KCalc.
 
 How to Launch
 -------------

source/2/2.4/2.4.4/pcmanfm-qt.rst

@@ -21,7 +21,7 @@ If you double click on a folder you open that folder in PCManFM-Qt and it shows
 Along the top to create a new tab in PCManFM-Qt you can use the button with a file and a plus on it to open a new tab or press :kbd:`control +t`. You also can double click on the tab bar to open a new tab. The left pointing arrow button is a back button while the right pointing arrow button moves you forward in the directories that you have moved in the file manager. Another way to go back and forward is :kbd:`Alt + Left arrow` or :menuselection:`Go --> Go Back` and another way to go forward is :kbd:`Alt + Right Arrow` or :menuselection:`Go --> Go Forward`. The button for the arrow pointing upward is to go up one level in the directory tree to the so called parent directory or press :kbd:`Alt+Up arrow`, press :kbd:`Backspace`, or :menuselection:`Go --> Go Up`. To rename your files right click on the file and click :menuselection:`Rename`, :menuselection:`Edit --> Rename`, or press :kbd:`f2`.
 
 
-To close a tab click on the :guilabel:`x` button on the tab bar, press :kbd:`Control +W`, or from the menu :menuselection:`File --> Close Tab`. To close tabs to the left right click on the tab bar and select :menuselection:`Close previous tabs`.  To close all tabs to the right of this tab :menuselection:`Close next tabs`. To close all tabs but the current one right click on the tab bar and :menuselection:`Close other tabs`.
+To close a tab click on the :guilabel:`x` button on the tab bar, press :kbd:`Control +W`, or from the menu :menuselection:`File --> Close Tab`. To close tabs to the left right click on the tab bar and select :menuselection:`Close previous tabs`.  To close all tabs to the right of this tab :menuselection:`Close next tabs`. To close all tabs but the current one right click on the tab bar and :menuselection:`Close other tabs`. To preserve settings for a folder of a tab check the :menuselection:`Preserve Settings for this Folder` checkbox. To preserve settings for a folder and all folders in this folder check the :menuselection:`Preserve Settings Recursively from Here` checkbox. To remove settings from deleted folders select :menuselection:`Remove Settings of Nonexistant folders`. 
 
 .. image:: pcmanfm-tab-context.png
 
@@ -189,7 +189,7 @@ The :guilabel:`Advanced` tab shows integration with other programs and advanced
 
 Version
 -------
-Lubuntu currently ships with 1.4.1 of PCManFM-Qt. 
+Lubuntu currently ships with 2.0.0 of PCManFM-Qt. 
 
 How to Launch
 -------------