# SOME DESCRIPTIVE TITLE. # Copyright (C) 2016-2018, Lubuntu Team. This work is licensed under a # Creative Commons Attribution 4.0 International License # This file is distributed under the same license as the Lubuntu Manual # package. # FIRST AUTHOR , 2018. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: Lubuntu Manual 18.10\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-07-26 14:54-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Generated-By: Babel 2.8.0\n" #: ../../source/2/2.2/2.2.6/qpdfview.rst:2 msgid "Chapter 2.2.6 qpdfview" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:4 msgid "qpdfview is the default PDF viewer for Lubuntu." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:16 msgid "Features:" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:7 msgid "Tabs" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:8 msgid "Presentation mode" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:9 msgid "Zoom to entire page/ page width" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:10 msgid "Rotating pages" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:11 msgid "Outline, properties, thumbnail, and bookmark docks" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:12 msgid "Printing support" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:13 msgid "Annotation and highlighting" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:14 msgid "Bookmarks" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:15 msgid "Customizable keyboard shortcuts" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:16 msgid "Viewing postscript files" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:19 msgid "Usage" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:20 msgid "" "To open a PDF file use :menuselection:`File --> Open` from the menu or " "press :kbd:`Control + O` on the keyboard. If you have a PDF open use " ":menuselection:`File --> Open` in new tab from the menu, click the Open " "in new tab button or press :kbd:`Control + T`. To refresh a PDF click the" " Refresh button, :menuselection:`File --> Refresh`, or press :kbd:`F5` " "just like most web browsers. To switch between tabs on the keyboard you " "can press control :kbd:`control + tab` or :menuselection:`Tabs --> Next " "Tab` to go the next tab or :kbd:`control + shift + tab` or " ":menuselection:`Tabs --> Previous Tab` to cycle through your tabs in the " "opposite direction. At the bottom of the tab menu will be a list of all " "your tabs you have open with the title of each document. To close the tab" " press the red X button on the tab or press :kbd:`Control +W`. To close " "all tabs on qpdfview press :kbd:`Control + Shift +W`. To restore the most" " recently closed tabs press :kbd:`Alt+Shift+W` or :menuselection:`Restore" " most recently closed tab`. To view a menu with your recently closed tab " ":menuselection:`Tabs --> Recently Closed` and select the file you want. " "To see a list of all your tabs in a menu they are at the bottom of the " ":menuselection:`Tabs` menu." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:22 msgid "" "If you want a second copy of a PDF file open right click on the tab and " ":menuselection:`Open Copy in new tab`. If you want a copy of the current " "PDF on the tab and select :menuselection:`Open Copy in new window`. To " "open your file manager in the current directory right click on the tab " "and :menuselection:`Open Containing Folder`. To close all tabs right " "click on the tab bar and :menuselection:`Close all tabs`. To Close all " "tabs but that one you right click on right click on a tab and " ":menuselection:`Close all tabs but this one`. To close all tabs to the " "right of the one you right click right click on a tab and " ":menuselection:`Close all tabs to right`. To close all tabs to the left " "right click on a tab and :menuselection:`Close all tabs to left`." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:26 msgid "" "If you want to view a particular page select the box (e.g. page 1/3) in " "towards the top left corner and type the page number (e.g. page 3/3). To " "move to the previous and next page press the :kbd:`left arrow` and " ":kbd:`right arrow` buttons respectively. There are numerous zoom option, " "including percentage, page width, and page size in a box a little to the " "right of the page box. Another way to jump to a particular page is to " "press :kbd:`control + j` or :menuselection:`Edit --> Jump to page`. To go" " back to page which you have just come from press :kbd:`control + enter` " "or :menuselection:`Edit --> Jump backward`. To jump forward a page press " ":kbd:`control + shift + enter` or :menuselection:`Edit --> Jump forward`." " To move to the last page of the PDF press the :kbd:`End` key or " ":menuselection:`Edit --> Last Page`. To move to the first page of the PDF" " press the :kbd:`Home` key or :menuselection:`Edit --> First page`." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:28 msgid "" "To print your PDF press :kbd:`Control + P` or :menuselection:`File --> " "Print`. To change what printer you use use the :guilabel:`Name` drop down" " to select the name of the printer. To see more options press the " ":guilabel:`Options >>` button to see more options when you print. To " "select which pages to print use the :guilabel:`Pages from` button and " "then the fields for the first page to print and then the last page to " "print. To change what pages you print and type the page number in use the" " :guilabel:`Pages` field. To print your current page press the " ":guilabel:`Current Page` button. To change how many copies you print " "change the :guilabel:`Copies` field." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:33 msgid "" "If you are printing the PDF in black and white you can however toggle " "previewing the file in black and white by pressing :kbd:`Control + U` or" " :menuselection:`View --> Convert to grayscale`. To invert the colors of " "your PDF press :kbd:`Control +I` or :menuselection:`View --> Invert " "Colors`. To trim the margins off your PDF file press :kbd:`control +Shift" " +U` or :menuselection:`View --> Trim margins`. If you want to turn off " "changed colors or trimmed margins off press or use the menu in the same " "thing again." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:35 msgid "" "To select text or an image from qpdfview press :kbd:`control+c` or " ":menuselection:`Edit --> Copy to clipboard`. Then the cursor will turn " "into a crosshair and you will be able to expand a box to select either " "text or an image and a menu to select copying the text, selecting the " "text, copying the image, or saving the image to file. Another way to copy" " text is to press :kbd:`Shift + Left Click`." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:37 msgid "" "To save your PDF file is to :menuselection:`File --> Save` or you can " "press :kbd:`Control + s`. You can save the file with a different name " "with :menuselection:`File --> Save as`. To save a copy of the document " "click :menuselection:`File --> Save a copy`. If you want to quit qpdfview" " press :kbd:`Control+Q`." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:39 msgid "" "qpdfview also includes some very useful docks. To view the outline dock, " "in the menu select :menuselection:`View --> Docks --> Outline (make sure " "the button is checked)` or press :kbd:`F6` on the keyboard. It should " "appear on the left hand side of the PDF with collapsible sections and to " "expand or collapse each section left click on the :menuselection:`-->`. " "To go to a particular part of the outline double click on that part of " "the outline. To see the entire outline right click on the outline and " "select :menuselection:`Expand all`. To have your outline back to the " "original state right click on it and select :menuselection:`Collapse " "all`. This is useful in navigating large PDFs." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:43 msgid "" "To view properties of your PDF file press :kbd:`F7` or " ":menuselection:`View --> Docks --> Properties`. To see a thumbnail of " "each page :menuselection:`View --> Dock --> Thumbnails` or press " ":kbd:`F8` to view a thumbnail of each page of the PDF file. If you want " "to close one of these docks click the X button on the dock to close it. " "To detach a dock to its own floating window press the diamond button to " "detach it. To get the dock back to where it was press the diamond button " "again." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:47 msgid "" "To view two pages at once like if you want to see a two page spread of an" " illustration in a PDF of a book press :kbd:`Control + 6` or " ":menuselection:`View --> Two pages`. To get your view back to normal " "press :kbd:`Control +6` again or :menuselection:`View --> Two pages` " "again. To toggle the view of three pages at a time press :kbd:`Control " "+4` or :menuselection:`View --> Multiple pages`. To view right to left " "languages on qpdfview press :kbd:`Control +Shift +R` or " ":menuselection:`View --> Right to left`. To view the fonts embedded in " "the PDF :menuselection:`View --> Fonts`." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:49 msgid "" "To search through your PDF file you can press :kbd:`control + f` or from " "the menu :menuselection:`Edit --> Search`. You will get taken to the " "results and will appear highlighted in yellow to see through the results " "you can press the down arrow or press :kbd:`F3` to see results farther in" " the document and press the upward pointed arrow button or press " ":kbd:`Shift +F3` to see results towards the start of the document. To " "exit the view to search dialog press :kbd:`Escape` or " ":menuselection:`Edit --> Cancel search`. If you want the search to match " "case check the :guilabel:`Match case` checkbox. To match entire words " "check the :guilabel:`Whole words` checkbox. To highlight all matches of " "words check the :guilabel:`Highlight all` checkbox. To exit the search " "press the button that looks like an octagon." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:53 msgid "" "To make qpdfview fullscreen you can press :kbd:`f11` or " ":menuselection:`View -->Fullscreen`. To enter presentation mode you can " "press :kbd:`f12` or :menuselection:`View --> Presentation` which makes " "the content of the PDF take up the fullscreen and gives you no menubars " "or toolbars. To exit presentation mode you can press :kbd:`f12` again. To" " advance to the next page in the presentation press the :kbd:`spacebar` " "or the :kbd:`right arrow`. To go back a page in presentation press the " ":kbd:`left arrow`. To exit the presentation press :kbd:`escape`. To go to" " the first page of the presentation press the :kbd:`Home` key. To go to " "the last page of the presentation press the :kbd:`End` key." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:55 msgid "" "To make an annotation press :kbd:`Control +A` or :menuselection:`Edit -->" " Add annotation`. To view the annotation you have made or edit it again " "press click on what looks like a sticky note with a pin in it. To remove " "your annotation right click on the annotation and click " ":menuselection:`Remove annotation`. If you just want to highlight " "something right click on the text and select :menuselection:`Add " "highlight` text." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:57 msgid "" "To select page width in zoom in qpdfview is a drop down menu with page " "width to show the width of the page on qpdfview, :menuselection:`View -->" " Fit to page width`, or press :kbd:`Control +9`. To view the whole page " "on qpdfview in this drop down menu select whole page, " ":menuselection:`View --> fit to page size`, or press :kbd:`Control + 8`. " "To return to the original zoom press :kbd:`Control + 0` or " ":menuselection:`View --> Original size`. To zoom in is press the " "magnifying glass with a + in it or press :kbd:`Control + +` or " ":menuselection:`View --> Zoom in`. To zoom out press the magnifying glass" " button with a - in it or press :kbd:`Control + -` or " ":menuselection:`View --> Zoom out`. To rotate the file to the left is " "press :kbd:`Control + Left arrow` or :menuselection:`View --> Rotate " "Left`. To rotate the file to the right is press :kbd:`Control + Right " "arrow` or :menuselection:`View --> Rotate Right`. Another way to rotate " "is to hold :kbd:`Shift` and then use the mousewheel. Another way to zoom " "with the scrollwheel is to press :kbd:`Control` and zoom with the " "mousewheel." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:59 msgid "" "If you have a particularly long PDF file you might want to make a " "bookmark to find a specific thing easily. To create a bookmark press " ":kbd:`control +b` or :menuselection:`Bookmarks --> Add Bookmark` and " "give the bookmark a memorable title and description so you can find it in" " this document again easily. If you later want to remove the bookmark go " ":menuselection:`Bookmarks --> Remove bookmark` or press :kbd:`control+ " "shift+ B`." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:61 msgid "" "To jump to the start of a PDF file press the :kbd:`home` key or " ":menuselection:`Edit --> First Page`. To jump to the last page of a PDF " "file press the :kbd:`end` key or :menuselection:`Edit --> Last Page`. To " "move to the next page with a keyboard press :kbd:`Spacebar` or press " ":kbd:`Backspace` to move back a page. If you scroll past the end of a " "page on qpdfview you can change the page." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:64 msgid "Screenshot" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:68 msgid "Customizing" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:69 msgid "" "To add your own settings to qpdfview you can get to a settings window " "with :menuselection:`Edit --> Settings`. To change how qpdfview uses " "links or manages tabs left click on the :guilabel:`Behavior` tab. The " "checkbox :guilabel:`Open URL` allows you to turn on or off Opening URLs " "or links within qpdfview. The :guilabel:`Auto-refresh` checkbox reloads " "the PDF whenever the file changes which is useful for authoring PDF " "files. To have qpdfview keep track of recently check the :guilabel:`Track" " recently used` checkbox. To keep track of recently closed documents " "check the :guilabel:`Keep recently closed` checkbox. To open the tabs you" " had open last time with qpdfview the next time you open the program " "check the :guilabel:`Restore tabs` checkbox. To change what screen you " "use for presentations change the :guilabel:`Presentation Screen` field to" " the number of the screen you want to use. To change the page in the main" " view in addition with the presentation check the :guilabel:`Synchronize " "presentation` checkbox. To have your outline dock follow where you " "currently are in the PDF check the :guilabel:`Synchronize outline view` " "checkbox. If you want to scroll once to change an entire page check the " ":guilabel:`Minimal scrolling` checkbox. To change the color of highlights" " type a hex number for a color or select one from the " ":guilabel:`Highlight Color` drop down menu." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:74 msgid "" "If you want to reset these settings to the defaults is to press the " ":guilabel:`Defaults` button. If you just want defaults on the current tab" " you can press the :guilabel:`Defaults on current tab` button. If you " "want to return to viewing your PDF with the same settings press the " ":guilabel:`OK` button. If you wish to discard your changes press the " ":guilabel:`Cancel` button." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:76 msgid "" "To deal with settings on graphics press press on the :guilabel:`Graphics`" " tab. The settings for paper color will has a drop down menu for " "previewing what it is like printing on colored paper. The checkbox " ":guilabel:`Prefetch` will preload pages not directly viewed by the PDF " "viewer not directly on the screen however this will use more resources. " "The drop down for :guilabel:`Cache size` will increase loading speed but " "will use more resources. The :guilabel:`Prefetch` checkbox loads pages " "before you view them. The :guilabel:`Prefetch distance` tells you how " "many pages away from where you are to load. The field for " ":guilabel:`Presentation background color` sets the color of the " "background for presentations. The :guilabel:`Cache size` increases the " "size of the cache which will apply more system resources to run heavy " "PDFs like hundred of pages of full color artwork." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:80 msgid "" "The :guilabel:`PDF` subtab of the graphics tab has settings for font and " "paper color for viewing PDF files. To antialias images check the " ":guilabel:`Antialiasing` checkbox. To antialias text check the " ":guilabel:`Text antialiasing` checkbox. To use font hinting to view text " "easier to view change the :guilabel:`Text hinting` menu to Reduced or " "full. To not change the background color with change the " ":guilabel:`Ignore paper color` checkbox. To change how qpdfview draws " "thin lines change the :guilabel:`Thin line mode` drop down menu." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:84 msgid "" "The :guilabel:`PS` subtab manages how Postscript files appear on the " "screen. To change how many bits are used for antialiasing graphics change" " the :guilabel:`Graphics antialias bits` field. To change the number of " "bits of text antialiasing change :guilabel:`Text antialiasing bits` " "field." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:88 msgid "" "To change the interface settings click on the :guilabel:`Interface` tab." " If you want the tabs to be spread out press the spread tabs checkbox. " "The :guilabel:`Tab position` changes where the tabbar on the window. The " ":guilabel:`Tab visibility` menu can be set to as needed, always or never " "which will show or hide the tabbar. The checkbox for :guilabel:`New tab " "next to current tab` opens new tabs next to the current one. The field " "for recently used lets you set the maximum number of files to keep around" " in recently used. The :guilabel:`Spread tabs` checkbox spreads the tabs " "to take up the whole tab bar and they get smaller the more tabs you open." " To have qpdfview close when the last tab in qpdfview is closed check the" " :guilabel:`Exit after last tab` checkbox. To change the number of " "recently used PDF files in the menu change the :guilabel:`Recently used " "count` field. To change how many recently closed tabs of PDFs are shown " "change the :guilabel:`Recently closed count` field." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:92 msgid "" "The :guilabel:`Shortcuts` tab provides the ability to customize keyboard " "shortcuts. The :guilabel:`Action` column is what each keyboard shortcut " "does. The :guilabel:`Key sequence` column shows the keyboard shortcut. " "Double click in the key sequence column and type in your desired keyboard" " shortcut to change the keyboard shortcut." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:96 msgid "" "The :guilabel:`Modifiers` tab allows you to change settings with the " "mouse and certain keyboard shortcuts in combination with the mouse. To " "change what keyboard shortcut to hold down while you hold down your " "mousewheel to zoom use the :guilabel:`Zoom` drop down menu. To change " "what keyboard key to hold down before using the mousewheel use the " ":guilabel:`Rotate` key. To change what key to press when you copy text to" " the clipboard when also pressing a mouse button use the :guilabel:`Copy " "to Clipboard` drop down menu. To switch which key you press when left " "clicking to add an annotation use the :guilabel:`Add annotation` drop " "down menu. To change what what you press to while left clicking to zoom " "to a selection change the :guilabel:`Zoom to Selection` drop down menu." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:101 msgid "Version" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:102 msgid "Lubuntu ships with version 0.4.18 of qpdfview." msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:105 msgid "How to Launch" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:106 msgid "" "To launch qpdfview go to the Menu :menuselection:`Office --> qpdfview` or" " run" msgstr "" #: ../../source/2/2.2/2.2.6/qpdfview.rst:112 msgid "" "from the command line. The icon for qpdfview looks like an eye with a " "blue background." msgstr "" #~ msgid "" #~ "To open a pdf file use File " #~ "-> Open from the menu or Ctrl " #~ "+ O on the keyboard. If you " #~ "have a pdf open use File -> " #~ "Open in new tab from the menu, " #~ "click the Open in new tab button" #~ " or press Ctrl + T. To refresh" #~ " a pdf click the Refresh button " #~ "or press F5 just like most web " #~ "browsers." #~ msgstr "" #~ msgid "" #~ "If you want to view a particular" #~ " page select the box (e.g. page " #~ "1/3) and tpye the page number " #~ "(e.g. page 3/3). To move to the" #~ " previous and next page use the " #~ "left and right arrow buttons " #~ "respectively. There are numerous zoom " #~ "option, including percentage, page width, " #~ "page size, continous, and multiple " #~ "pages." #~ msgstr "" #~ msgid "" #~ "qpdfview also includes some very useful" #~ " docks. To view the outline dock, " #~ "in the menu select View -> Docks" #~ " -> O utline (make sure the " #~ "button is checked) or press F6 on" #~ " the keyboard. It should appear on" #~ " the left hand side of the pdf" #~ " with collapsable sections. This is " #~ "useful in navigating large pdfs." #~ msgstr "" #~ msgid "" #~ "To launch qpdfview go to the Menu" #~ " -> Office -> qpdfview or run " #~ "qpdfview from the command line." #~ msgstr "" #~ msgid "qpdfview is the default pdf viewer for Lubuntu." #~ msgstr "" #~ msgid "tabs" #~ msgstr "" #~ msgid "presentation mode" #~ msgstr "" #~ msgid "zoom to entire page/ page width" #~ msgstr "" #~ msgid "rotating pages" #~ msgstr "" #~ msgid "outline, properties, thumbnail, and bookmark docks" #~ msgstr "" #~ msgid "printing support" #~ msgstr "" #~ msgid "annotation and highlighting" #~ msgstr "" #~ msgid "bookmarks" #~ msgstr "" #~ msgid "customizable keyboard shortcuts" #~ msgstr "" #~ msgid "" #~ "To open a pdf file use " #~ ":menuselection:`File --> Open` from the " #~ "menu or :kbd:`Control + O` on the" #~ " keyboard. If you have a pdf " #~ "open use :menuselection:`File --> Open` " #~ "in new tab from the menu, click" #~ " the Open in new tab button or" #~ " press :kbd:`Control + T`. To refresh" #~ " a pdf click the Refresh button, " #~ ":menuselection:`File --> Refresh`, or press" #~ " :kbd:`F5` just like most web " #~ "browsers. To switch between tabs on " #~ "the keyboard you can press control " #~ ":kbd:`control + tab` to go the " #~ "next tab or :kbd:`control + shift " #~ "+ tab` to cycle through your tabs" #~ " in the opposite direction. At the" #~ " bottom of the tab menu will be" #~ " a list of all your tabs you" #~ " have open with the title of " #~ "each document. To close the tab " #~ "press the red X button on the " #~ "tab or press :kbd:`Control +W`. To " #~ "close all tabs on qpdfview press " #~ ":kbd:`Control + Shift +W`. To restore" #~ " the most recently closed tabs press" #~ " :kbd:`Alt+Shift+W` or :menuselection:`Restore " #~ "most recently closed tab`." #~ msgstr "" #~ msgid "" #~ "If you want a second copy of " #~ "a pdf file open right click on " #~ "the pdf file and :menuselection:`Open " #~ "Copy in new tab`. If you want " #~ "a copy of the current pdf open " #~ "the pdf file and :menuselection:`Open " #~ "Copy in new window`. To open your" #~ " file manager in the current " #~ "directory right click on the tab " #~ "bar and :menuselection:`Open Containing " #~ "Folder`. To close all tabs right " #~ "click on the tab bar and " #~ ":menuselection:`Close all tabs`. To Close " #~ "all tabs but that one you right" #~ " click on right click on a tab" #~ " and :menuselection:`Close all tabs but " #~ "this one`. To close all tabs to" #~ " the right of the one you right" #~ " click right click on a tab and" #~ " :menuselection:`Close all tabs to right`." #~ " To close all tabs to the left" #~ " right click on a tab and " #~ ":menuselection:`Close all tabs to left`." #~ msgstr "" #~ msgid "" #~ "If you want to view a particular" #~ " page select the box (e.g. page " #~ "1/3) and type the page number " #~ "(e.g. page 3/3). To move to the" #~ " previous and next page use the " #~ "left and right arrow buttons " #~ "respectively. There are numerous zoom " #~ "option, including percentage, page width, " #~ "page size, continous, and multiple " #~ "pages. Another way to jump to a" #~ " particular page is to press " #~ ":kbd:`control + j` or :menuselection:`Edit " #~ "--> Jump to Page`. To go back " #~ "to page which you have just come" #~ " from press :kbd:`control + enter` or" #~ " :menuselection:`Edit --> Jump backward`. " #~ "To jump forward a page press " #~ ":kbd:`control + shift + enter` or " #~ ":menuselection:`Edit --> Jump Forward`." #~ msgstr "" #~ msgid "" #~ "To print your pdf press :kbd:`Control" #~ " + P` or :menuselection:`File --> " #~ "Print`. If you are printing the " #~ "pdf in black and white you can " #~ "however tpggle previewing the file in" #~ " black and white by pressing " #~ ":kbd:`Control + U` or :menuselection:`View " #~ "--> Convert to grayscale`. To invert " #~ "the colors of your pdf press " #~ ":kbd:`Control +I` or :menuselection:`View -->" #~ " Invert Colors`. To trim the margins" #~ " off your pdf file press " #~ ":kbd:`control +Shift +U` or " #~ ":menuselection:`View --> Trim margins`. If " #~ "you want to turn any of the " #~ "alrenetes colors or trimmed margins off" #~ " press or use the menu in the" #~ " same thing again." #~ msgstr "" #~ msgid "" #~ "To select text or an image from" #~ " qpdfview press :kbd:`control+c` or " #~ ":menuselection:`Edit --> Copy to clipboard`." #~ " Then the cursor will turn into " #~ "a crosshair and you will be able" #~ " to expand a box to slect " #~ "either text or an image and a " #~ "menu to select copying the text, " #~ "selecting the text, copying the image," #~ " or saving the image to file. " #~ "Another way to copy text is to " #~ "press :kbd:`Control +Left Click`." #~ msgstr "" #~ msgid "" #~ "To save your pdf file is to " #~ ":menuselection:`File --> Save` or you " #~ "can press :kbd:`Control + s`. You " #~ "can save the file with a different" #~ " name with :menuselection:`File --> SAve" #~ " as`. To save a copy of the " #~ "document click :menuselection:`File --> Save" #~ " a copy`." #~ msgstr "" #~ msgid "" #~ "qpdfview also includes some very useful" #~ " docks. To view the outline dock, " #~ "in the menu select :menuselection:`View " #~ "--> Docks --> Outline (make sure " #~ "the button is checked)` or press " #~ ":kbd:`F6` on the keyboard. It should " #~ "appear on the left hand side of" #~ " the pdf with collapsable sections. " #~ "This is useful in navigating large " #~ "pdfs. To see a thumbnail of each" #~ " page :menuselection:`View --> Dock --> " #~ "Thumbnails` or press :kbd:`f8` to view" #~ " a thumbnial of each page of " #~ "the pdf file. If you want to " #~ "close one of these docks click the" #~ " X button on the dock to close" #~ " it. To view the fonts embeded " #~ "in the pdf :menuselection:`View --> " #~ "Fonts`." #~ msgstr "" #~ msgid "" #~ "To view two pages at once like " #~ "if you want to see a two " #~ "page spread of an illustration in " #~ "a pdf of a book press " #~ ":kbd:`Control + 6` or :menuselection:`View " #~ "--> Two pages`. To get your view" #~ " back to normal press :kbd:`Control " #~ "+6` agian or :menuselection:`View --> " #~ "Two pages` again. To toggle the " #~ "view of three pages at a time " #~ "press :kbd:`Control +4` or " #~ ":menuselection:`View --> Multiple pages`. To" #~ " view right to left languges on " #~ "qpdfview press :kbd:`Control +Shift +R` " #~ "or :menuselection:`View --> Right to " #~ "left`." #~ msgstr "" #~ msgid "" #~ "To search through your pdf file " #~ "you can press :kbd:`control + f` " #~ "or from the menu :menuselection:`edit " #~ "--> search`. You will get taken to" #~ " the results and will appear " #~ "highligheted in yellow to see through" #~ " the results you can press the " #~ "down arrow to see results farther " #~ "in the document and press the " #~ "upward pointed arrow button to see " #~ "results towards the start of the " #~ "document. To exit the view to " #~ "search dialog press :kbd:`Escape` or " #~ ":menuselection:`Edit --> Cancel search`." #~ msgstr "" #~ msgid "" #~ "To make qpdfview fullscreen you can " #~ "press :kbd:`f11` or :menuselection:`View " #~ "-->Fullscreen` . To enter presentation " #~ "mode you can press :kbd:`f12` or " #~ ":menuselection:`View --> Presentation` which " #~ "makes the content of the pdf take" #~ " up the fullscreen and gives you " #~ "no menubars or toolbars. To exit " #~ "presentation mode you can press " #~ ":kbd:`f12` again. To advance to the " #~ "next page in the presentation press " #~ "the :kbd:`spacebar` or the :kbd:`right " #~ "arrow`. To go back a page in " #~ "presentation press the :kbd:`left arrow`. " #~ "To exit the presentation press " #~ ":kbd:`escape`." #~ msgstr "" #~ msgid "" #~ "To make an annotation press " #~ ":kbd:`Control +A` or :menuselection:`Edit -->" #~ " Add annotation`. To view the " #~ "annotation you have made or edit " #~ "it again press click on what looks" #~ " like a sticky note with a pin" #~ " in it. To remove your annotation " #~ "right click on the annotation and " #~ "click remove annotation. If you just " #~ "want to highlight something slect add" #~ " highlight at the context menu right" #~ " then." #~ msgstr "" #~ msgid "" #~ "To sleect page width in zoom in" #~ " qpdfview is a drop down menu " #~ "with page width to show the width" #~ " of the page on qpdfview, " #~ ":menuselection:`View --> Page width`, or " #~ "press :kbd:`Control +9`. To view the " #~ "whole page on qpdfview in this " #~ "drop down menu select whole page, " #~ ":menuselection:`View --> fit to page " #~ "size`, or press :kbd:`Control + 8. " #~ "To return to the original zoom " #~ "press :kbd:`Control + 0` or " #~ ":menuselection:`View --> Original size`. To" #~ " zoom in is press the magnifying " #~ "glass with a + in it or " #~ "press :kbd:`Control + +` or " #~ ":menuselection:`View --> Zoom in`. To " #~ "zoom out press the magnifying glass " #~ "button with a - in it or " #~ "press :kbd:`Control + -` or " #~ ":menuselection:`View --> Zoom out`. To " #~ "rotate the file to the left is " #~ "press :kbd:`Control + Left` or " #~ ":menuselection:`View --> Rotate Left`. To " #~ "rotate the file to the right is" #~ " press :kbd:`Control + Rights` or " #~ ":menuselection:`View --> Rotate Right`.Another " #~ "way to zoom with the scrollwheel " #~ "is to press :kbd:`Control` and zoom " #~ "with the mousewheel." #~ msgstr "" #~ msgid "" #~ "If you have a particularly long " #~ "pdf file you might want to make" #~ " a bookmark to find a specific " #~ "thing easily. To create a bookmark " #~ "press :kbd:`control +b` or " #~ ":menuselection:`Bookmarks --> Add Bookmark` " #~ "and give the bookmark a memorable " #~ "title and description so you can " #~ "find it in this document again " #~ "easily. If you later want to " #~ "remove the bookmark go " #~ ":menuselection:`bookmarks --> remove bookmark` " #~ "or press :kbd:`control+ shift+ B`." #~ msgstr "" #~ msgid "" #~ "To jump to the start of a " #~ "pdf file press the :kbd:`home` key " #~ "or :menuselection:`Edit --> First Page`. " #~ "To jump to the last page of " #~ "a pdf file press the :kbd:`end` " #~ "key or :menuselection:`Edit --> Last " #~ "Page`. To move to the next paget" #~ " with a keyboard press :kbd:`Spacebar` " #~ "or press :kbd:`Backspace` to move back" #~ " a page." #~ msgstr "" #~ msgid "" #~ "To add your own settings to " #~ "qpdfview you can get to a settings" #~ " window with :menuselection:`Edit --> " #~ "Settings`. The checkbox for open url " #~ "allows you to turn on or off " #~ "Opening URL within within qpdfview. The" #~ " autorefresh checkbox relaods the pdf " #~ "whenever the file changes which is " #~ "useful if you are authoring pdf " #~ "files. If you want to scroll once" #~ " to go to an entire page check" #~ " the :guilabel:`minimal scrolling` checkbox. " #~ "To change the color of highlights " #~ "tpye a hex number for a color " #~ "or select one from the drop down" #~ " menu by name." #~ msgstr "" #~ msgid "" #~ "If you want to reset these " #~ "settings to the defaults is to " #~ "press the :guilabel:`defaults` button. If " #~ "you just want defaults on the " #~ "current tab you can press the " #~ ":guilabel:`defaults on current tab` button." #~ " If you want to return to " #~ "viewing your pdf with the same " #~ "settings press the :guilabel:`OK` button. " #~ "If you wish to discard your " #~ "changes press the :guilabel:`cancel` button." #~ msgstr "" #~ msgid "" #~ "To deal with settings on graphics " #~ "press press on the :guilabel:`graphics` " #~ "tab. The settings for paper color " #~ "will has a drop down menu for " #~ "previewing what it is like printing " #~ "on colored paper. The checkbox for " #~ "prefetch will preload pages not directly" #~ " viewed by the pdf viewer not " #~ "directly on the screen however this " #~ "will use more resources. The drop " #~ "down for cache size will larger " #~ "will use up more resources but " #~ "will make loading pdfs much faster. " #~ "The :guilabel:`Prefetch` checkbox loads pages" #~ " before you view them. The " #~ ":guilabel:`Prefetch distance` tells you how" #~ " many pages away from where you " #~ "are to load. The field for " #~ ":guilabel:`Presentation background color` sets " #~ "the color of the background for " #~ "presentations. The :guilabel:`Cache size` " #~ "increases the size of the cache " #~ "which will apply more system resorouces" #~ " to run heavy pdfs like hundred " #~ "of pages of full color artwork." #~ msgstr "" #~ msgid "" #~ "To change the interface settings click" #~ " on the :guilabel:`interface` tab. If " #~ "you want the tabs to be spread " #~ "out press the spread tabs checkbox. " #~ "The the :guilabel:`tab position` changes " #~ "where the tabbar on the window. " #~ "The tab visibility can be set to" #~ " as needed, always or never. The " #~ "checkbox for :guilabel:`new tab next to" #~ " current tab` opens new tabs next " #~ "to the current one. The field for" #~ " recently used lets you set the " #~ "maximum number of files to keep " #~ "around in recently used. The " #~ ":guilabel:`Spread tabs` checkbox spreads the" #~ " tabs to take up the whole tab" #~ " bar and they get smaller the " #~ "more tabs you open." #~ msgstr "" #~ msgid "" #~ "The :guilabel:`Shortcuts` tab provides the " #~ "abilty to customize keyboard shortcuts. " #~ "The :guilabel:`Action` column is what is" #~ " keyboard shortcut does. The :guilabel:`Key" #~ " seqeunce` column shows the keyboard " #~ "shorcut. Double click in the key " #~ "sequence column to change the keyboard" #~ " shortcut." #~ msgstr "" #~ msgid "Lubuntu ships with version 0.4.17 of qpdfview." #~ msgstr "" #~ msgid "How to launch" #~ msgstr "" #~ msgid "from the command line." #~ msgstr ""