kpartx on riscv64 appears to be racy. Rather than trying to debug these
fraught races somewhere between udev and libdevmapper, we can use losetup
which should be simpler and less error-prone.
live-build/auto/config:
- for Ubuntu Server live images and the arm64+tegra full arch, build a
tegra variant with linux-nvidia-tegra as the flavor and
linux-nvidia-tegra as the kernel meta-package
- default to nvidia-$SUBARCH as the kernel flavor for all images using
arm64+tegra as full arch
hooks/03-kernel-metapkg.chroot_early:
- use linux-nvidia-tegra as kernel meta-package for the nvidia-tegra
flavor
missing a && between icicle and visionfive, led to /boot/efi still being
in place, and grub-install running instead of exiting the func.
fixes LP:2015750
Cloud-init cannot write directly to
/etc/NetworkManager/system-connections because subiquity may
need to emit config to /etc/netplan/00-installer.yaml and call
netplan apply for autoinstall.network use-cases.
When cloud-init's config is written directly to
/etc/NetworkManager, neither netplan nor subiquity has knowledge of
this config and this results in namespace collisions in NetworkManager
due to `netplan-` named connections and `cloud-init` connection ids
fighting over which config own a given interface name.
Deleting this config overlay allows subiquity to manage all network
setup when it needs to with netplan directly.
Subiquity already has logic to rename any unwanted netplan
configuration when it intends to write cfg and run netplan apply[1].
This should allow subiquity full control of network config when needed.
[1] https://github.com/canonical/subiquity/blob/
92ac6544cdfedfd332d8cd94dbcfad0aab994575/subiquitycore/
controllers/network.py#L267
LP: #2015605
SUBARCH=visionfive2 is used to build images for the StarFive VisionFive 2
boards. For the device-tree we assume board revision 1.3B.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Autoinstall directives can be provided on the grub cmdline to
cloud-init via kernel parameters like the following:
autoinstall 'ds=nocloud-net;s=http://somedomain/'
In order to support DNS resolution for NoCloud datasource at
datasource discovery time, cloud-init.service needs to be
orderered after NetworkManager.service and
NetworkManager-wait-online.service
which will have brought up applicable NICs.
Since NetworkManager is After=dbus.service, the cloud-init.service
avoids systemd ordering cycles by also dropping
Before=sysinit.target when it adds, After=NetworkManager.service and
After=NetworkManager-wait-online.service
Add this file overlay for /lib/systemd/system/cloud-init.service
because systemd drop-in files can only add constraints and not
drop prexisting service constraints.
Also add an AUTOMATION_HEADER comment to any generated files to
add discoverability in the event of future bugs/concerns.
LP: #2008952
ipc was dropped as an apparmor feature. checked by grabbing the latest
lunar VM, installing the latest kernel, doing a reboot, and comparing
directories and files. compared all files and the only diff is the ipc
posix_mqueue
Evolve the seed to only ship the specific part useful to WSL users. This
allows to trim down the image size.
Co-authored-by: Jean-Baptiste Lallement <jean-baptiste@ubuntu.com>
For the SiFive HiFive Unmatched board we create a pre-installed image using
u-boot-menu. Increase the watchdog threshold in this case too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
With Radeon GPUs and kernel 5.19 a soft lockup was observed.
Increase the watchdog threshold.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Using numbered configuration fragments makes the order of application
easier to track
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This allows to consolidate linux-kvm and linux-generic kernel
flavours. This brings the perfomance benefit of linux-kvm flavour to
all cloud and pre-installed images. It does trade data-safety.
LP: #2006511
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
According to the EBBR specification the GPT partitions for firmware should
have attribute bit 0 (Required Partition) set.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Since version 2022.10 U-Boot SPL and U-Boot are installed onto the same partition.
Package nezha-boot0 is not needed anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
RISC-V boards tend to boot slowly.
We should provide progress information when booting.
Use 'efi=debug earlycon' on the Linux command line via new file
/etc/default/grub.d/cmdline.cfg.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We add a ubuntu user inside the image because we
want to have a operational nonroot user and also
be aligned with the other Ubuntu images.
Signed-off-by: Samir Akarioh <samir.akarioh@canonical.com>
The Nezha and the LicheeRV boards do not have enough memory for an initrd
with most modules. Therefore the number of included modules has to be
reduced.
Create file /etc/initramfs-tools/conf.d/modules_list.conf
to set MODULES=list.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Remove redirections of type
command &1>2
Executing the command in the background and creating and empty file '2'
was never intended.
As the messages are information only redirecting to stderr would not make
sense either.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
So that people without network access can download the package and
install it using a usb drive for example.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
This reverts commit d5a7d6655f.
The Wifi driver package is in universe and can't be promoted in time for
the release, so revert this.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
The LicheeRV Dock board comes with only 512MB of DRAM so the only difference
with a Nezha image is the fact that we have to remove
cryptsetup-initramfs package which makes the initrd too big for the
board to boot.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Current Kinetic GCE image builds are failing with the following error:
update-initramfs: Generating /boot/initrd.img-5.19.0-1004-gcp
zstd: error 25 : Write error : No space left on device (cannot write compressed block)
E: mkinitramfs failure zstd -q -1 -T0 25
Seems like after `linux-gcp` update from 5.15 to 5.19 `linux-modules` package
has gotten ~40MB larger and with that GCE image builds are over the edge wrt
available disk space in chroot.
Bumped up disk image size for amd64 to 3.5GB to match the sizes used by armhf
and generic images.
The cloud-init bug (see LP:1968873) got fixed now so using a sshd
config snippet should work now.
This partly reverts commit aa1be5eaaa
but uses now 60-cloudimg-settings.conf instead of
10-cloudimg-settings.conf .
For now, all RISC-V hardware is SBC-like board which embed a Wifi
chipset so install wpasupplicant by default. We'll certainly split the
seeds between server and embedded hardware later.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
* Fix some issues with the netboot tarballs:
- Include the signed shim (oops).
- Make the kernel path on disk and in the bootloader config match (more
oops).
- Make paths more architecture dependent as the code in grubnetXXX.efi to
probe a platform dependent path first doesn't work.
While merging the VisionFive support, we removed the installation of
u-boot-menu for the Unmatched by mistake: fix this by reinstating it.
Fixes: ce9f5cacca ("riscv: Add support for StarFive VisionFive")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
This change triggered a bug in cloud-init (see LP:1968873). cloud-init
does not recongnize sshd options set in /etc/ssh/sshd_config.d/ and
cloud-init modifies directly /etc/ssh/sshd_config which gets then
overwritten by settings from /etc/ssh/sshd_config.d/ .
This reverts commit b54d24ff33.
3.5G is not enough for riscv64 preinstalled as the creation of the initrd fails
with the following error:
Creating config file /etc/default/grub with new version
Processing triggers for initramfs-tools (0.140ubuntu13) ...
update-initramfs: Generating /boot/initrd.img-5.15.0-1011-generic
zstd: error 25 : Write error : No space left on device (cannot write compressed block)
E: mkinitramfs failure zstd -q -1 -T0 25
update-initramfs: failed for /boot/initrd.img-5.15.0-1011-generic with 1.
dpkg: error processing package initramfs-tools (--configure):
installed initramfs-tools package post-installation script subprocess returned error exit status 1
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Michael Hudson-Doyle
Dan Bungert
Steve Langasek
Łukasz 'sil2100' Zemczak
Loïc Minier
Dave Jones
John Chittum
Chad Smith
Heinrich Schuchardt
William Wilson
Dimitri John Ledkov
Sean Davis
Didier Roche
Erich Eickmeyer
Sebastien Bacher
Utkarsh Gupta
Samir Akarioh
Brian Murray
Simon Poirier
Alexandre Ghiti
Ivan Kapelyukhin
Rudra Bali
Thomas Bechtold