As a result of not installing recommended packages the packages required to run `grub-install`
are no longer installed by default.
To ensure we can successfully run `grub-install` we install both `grub-pc` and `grub2-common`
packages.
EDK II is available for the StarFive VisionFive 2 board. As it is larger
than U-Boot we need to increase the size of the loader 2 partition to
accommodate it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Remove kvm-image altogether.
Previously for minimal image replace_kernel function replaced virtual
images with kvm, and called force_boot_without_initramfs. Now simply
call force_boot_without_initramfs for minimal image without replacing
kernel flavour.
This also means minimal images can now be built for arm64 and armhf.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Up to now we have used u-boot-menu for preinstalled images for the SiFive
HiFive Unmatched and Unleashed boards and GRUB for all other RISC-V images.
The choice was made because RISC-V GRUB was not available when the SiFive
boards where released.
Let the Unmatched and Unleashed board preinstalled images use GRUB.
Simplify the code.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Canonical Public Cloud's project seems a bad place to build images for
hardware devices however this is how things were done a we now need to
maintain this.
The recent change to mount the ESP on /boot breaks those images, instead
of adding more hacky things in the hook, create a dedicated target for
those images and use a different hook to build UEFI images.
This is driven by online encryption scenarios. In order to efficiently
encrypt the root filesystem without modifying the partition layout, the
kernel should sit in an un-encrypted /boot partition. Instead of
creating a new partition that would change the default partition layout,
we mount the ESP on /boot. We also need to then bind mount /boot on
/boot/efi because that's where Grub expects the ESP to be located.
missing a && between icicle and visionfive, led to /boot/efi still being
in place, and grub-install running instead of exiting the func.
fixes LP:2015750
SUBARCH=visionfive2 is used to build images for the StarFive VisionFive 2
boards. For the device-tree we assume board revision 1.3B.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
For the SiFive HiFive Unmatched board we create a pre-installed image using
u-boot-menu. Increase the watchdog threshold in this case too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
With Radeon GPUs and kernel 5.19 a soft lockup was observed.
Increase the watchdog threshold.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Using numbered configuration fragments makes the order of application
easier to track
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
According to the EBBR specification the GPT partitions for firmware should
have attribute bit 0 (Required Partition) set.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Since version 2022.10 U-Boot SPL and U-Boot are installed onto the same partition.
Package nezha-boot0 is not needed anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
RISC-V boards tend to boot slowly.
We should provide progress information when booting.
Use 'efi=debug earlycon' on the Linux command line via new file
/etc/default/grub.d/cmdline.cfg.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The Nezha and the LicheeRV boards do not have enough memory for an initrd
with most modules. Therefore the number of included modules has to be
reduced.
Create file /etc/initramfs-tools/conf.d/modules_list.conf
to set MODULES=list.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Remove redirections of type
command &1>2
Executing the command in the background and creating and empty file '2'
was never intended.
As the messages are information only redirecting to stderr would not make
sense either.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The LicheeRV Dock board comes with only 512MB of DRAM so the only difference
with a Nezha image is the fact that we have to remove
cryptsetup-initramfs package which makes the initrd too big for the
board to boot.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Current Kinetic GCE image builds are failing with the following error:
update-initramfs: Generating /boot/initrd.img-5.19.0-1004-gcp
zstd: error 25 : Write error : No space left on device (cannot write compressed block)
E: mkinitramfs failure zstd -q -1 -T0 25
Seems like after `linux-gcp` update from 5.15 to 5.19 `linux-modules` package
has gotten ~40MB larger and with that GCE image builds are over the edge wrt
available disk space in chroot.
Bumped up disk image size for amd64 to 3.5GB to match the sizes used by armhf
and generic images.
While merging the VisionFive support, we removed the installation of
u-boot-menu for the Unmatched by mistake: fix this by reinstating it.
Fixes: ce9f5cacca ("riscv: Add support for StarFive VisionFive")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
3.5G is not enough for riscv64 preinstalled as the creation of the initrd fails
with the following error:
Creating config file /etc/default/grub with new version
Processing triggers for initramfs-tools (0.140ubuntu13) ...
update-initramfs: Generating /boot/initrd.img-5.15.0-1011-generic
zstd: error 25 : Write error : No space left on device (cannot write compressed block)
E: mkinitramfs failure zstd -q -1 -T0 25
update-initramfs: failed for /boot/initrd.img-5.15.0-1011-generic with 1.
dpkg: error processing package initramfs-tools (--configure):
installed initramfs-tools package post-installation script subprocess returned error exit status 1
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
The image created uses a UEFI bootflow, so we install grub for this board
only. We also need flash-kernel to install the dtb where grub can find
it.
This image is specifically architectured so that it can be installed on
a "factory" board, meaning using the u-boot firmware which was
originally implemented for Fedora, so we need the p3 partition that
embeds a uEnv.txt file to tell u-boot what/where to load next stage.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Łukasz 'sil2100' Zemczak
Philip Roche
Heinrich Schuchardt
Michael Hudson-Doyle
Dimitri John Ledkov
Gauthier Jolly
Steve Langasek
John Chittum
Brian Murray
Alexandre Ghiti
Ivan Kapelyukhin
William Wilson