@ -21,7 +21,7 @@ This is the original 32-bit architecture that will work best on computers with v
LTS vs. Regular Releases
------------------------
Lubuntu offers two types of releases. The **Long Term Support** release, or the **LTS**, is the release recommended for most users. It is supported for three years after the release date and does not contain new features. Throughout the course of the cycle, the Ubuntu Kernel Team will deliver **Hardware Enablement** updates, or **HWE** updates, to Lubuntu via Linux kernel updates. Additionally, all currently-supported Lubuntu releases use the **LXDE** desktop environment, which is the traditional Lubuntu experience.
Lubuntu offers two types of releases. The **Long Term Support** release, or the **LTS**, is the release recommended for most users. It is supported for three years after the release date and does not contain new features. Throughout the course of the cycle, the Ubuntu Kernel Team will deliver **Hardware Enablement** updates, or **HWE** updates, to Lubuntu via Linux kernel updates. Additionally, all currently-supported Lubuntu LTS releases use the **LXDE** desktop environment, which is the traditional Lubuntu experience however Lubuntu 18.10 uses the **LXQt** which is a more modern environment.
For users looking to try new features every six months at the expense of the support cycle length, Lubuntu offers **interim releases**, or **regular releases**. These releases, while they are considered stable, are testing grounds for major, new features which will be rolled into the LTS release. Users of the regular releases are typically enthusiasts and somewhat more experienced users looking for a fresher experience.
@ -53,7 +53,7 @@ Downloading the image via BitTorrent
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instead of downloading the image from one server, you can "torrent" the image, or download it from multiple sources instead of just one. This is often faster and saves the bandwidth of the Ubuntu cdimage servers. If you would like to learn more about BitTorrent, take a look at `the Wikipedia page on the subject <https://en.wikipedia.org/wiki/BitTorrent>`_.
In order to torrent the file, you need a BitTorrent client. We recommend `Transmission <https://transmissionbt.com/>`_, an Open Source BitTorrent client. Since Transmission only provides clients for Linux and macOS, we recommend `uTorrent <https://www.utorrent.com/>`_ for Windows users.
In order to torrent the file, you need a BitTorrent client. We recommend `Transmission <https://transmissionbt.com/>`_, an Open Source BitTorrent client. Since Transmission only provides clients for Linux and macOS, we recommend `qbittorrent <https://www.qbittorrent.org/download.php>`_ for Windows users.
The BitTorrent links can be found on our Downloads page or cdimage.ubuntu.com, both linked above.
To open a new tab in firefox press the plus button on the right of the tab bar. To close a tab press the button with an x on the right side of the tab. To view your browsing history press the button that looks like a stack of books with the last one at the end the third item down will show you history. To view your downloaded files press the button that looks like three stacked books with a fourth leaning over -> Downloads.
To open a new tab in firefox press the plus button on the right of the tab bar or press :kbd:`Control + t`. To close a tab press the button with an x on the right side of the tab. To view your browsing history press the button that looks like a stack of books with the last one at the end the third item down will show you history. To view your downloaded files press the button that looks like three stacked books with a fourth leaning over -> Downloads.
To go back to a previous page in firefox press the button pointing to the left. To go forward to a page you have visited before but have now gone back from press the button with the arrow pointing to the right. To download a file directly to your local disk right click on the save file as and then you will get options to save the file where you want.
To go to a specific url in the address bar you can type it in the the main bar in the middle.
To go to a specific url in the address bar you can type it in the the main bar in the middle. If you have a url in your clipboard you can paste it here or into the address bar right click and paste and go.
To zoom in if you find the text on a web page to small press :kbd:`control + +`. If you want to zoom out on the text or pictures press :kbd:`control + -`. To reset to the original zoom press :kbd:`control + 0`.
If you want a menubar for firefox right click the tab bar and click the checkbox for menu bar.
If you want to view your firefox prefrences you can type about:preferences into the address bar. To have your seession restored each time you restart firefox is on the general tab of firefox prefrences is to press restore previous session. The tabs section has a checkbox to open links in new tabs instead of new windows which is checked by default. If you want to switch to new tabs immediately check the When you open a link in new tab, switch to it immediately.
Version
----------
@ -36,7 +42,7 @@ Lubuntu currently ships with the latest version of Firefox, Firefox Quantum.
How to launch
----------------
To open Firefox, click on the Firefox icon (red/orange fox covering a blue sphere) in the Lubuntu Menu.
To open Firefox, click on the Firefox icon (red/orange fox covering a blue sphere) in :menuselection:`Internet --> Firefox` Menu.
To chat on irc you need to connect to a server and join a channel. This can be done with the join button or by typing "/join [channel]". To send a query or private message directly to someone type "/query" username or right click on the user list and select start query. If you wish to view older messages just scroll up. Scroll down to view newer messages.
To add the Lubuntu IRC chat network click File-> Networks-> Configure_Networks->
+Add(Networks) -> Use preset, select Lubuntu IRC -> click OK.
To add the Lubuntu IRC chat network click :menuselection:`File --> Networks --> Configure_Networks` +Add(Networks) -> Use preset, select Lubuntu IRC -> click OK.
To join a channel simple type "/join 1" (where 1 is the channel name), right click the network and select join channel or use the join button.
In Quasel if someone says your name you are said to be highlighted which in Quasel will make a sound and in a goldenrod color over the line of text with your name on it. The notification will also be shown on your desktop if you are in another window.
To use Sasl authentication to autologin to an account no matter which nickname you want to use file -> networks -> configure networks to bring up a network configuration dialog. Click on the autoidentify tab and press the checkbox for use SASL authentication. Enter your username on the IRC network in the username text field. Input your password into the password field so that you know how to auto identifify. You can also autoidentify without using sasl by clicking the Top checkbox. Nickserv is a sensible default for what the services is but it may be different on different servers and put your password in where you autoidentify.
To use Sasl authentication to autologin to an account no matter which nickname you want to use :menuselection:`File --> Networks --> Configure networks` to bring up a network configuration dialog. Click on the autoidentify tab and press the checkbox for use SASL authentication. Enter your username on the IRC network in the username text field. Input your password into the password field so that you know how to auto identifify. You can also autoidentify without using sasl by clicking the Top checkbox. Nickserv is a sensible default for what the services is but it may be different on different servers and put your password in where you autoidentify.
To add close the list of nicknames or channels press the X button. To reopen the view of nicks :menuselection:`View --> Nicks`.
To change your settings on your notifications :menuselection:`Settings --> Notificiations`.
To select all of your Settings for Quassel :menuselection:`Settings --> Configure Quassel`.
Screenshot
----------
@ -33,7 +38,7 @@ Lubuntu ships with version 1:0.12.5 of Quassel IRC.
How to Launch
-------------
In the menu go to Internet -> Quassel IRC or type
In the menu go to :menuselection:`Internet --> Quassel` IRC or type
@ -11,7 +11,7 @@ Lubuntu ships with version 5.13.5 of bluedevil.
Pairing
-------
To launch bluedevil to pair with a device from the menu -> Internet -> Bluedevil Wizard. If bluetooth is disabled you will be asked to enable it. In the main part of the window will show detected bluetooth devices. Click on the device you wish to add and press next.
To launch bluedevil to pair with a device from the menu :menuselection:`Internet --> Bluedevil Wizard`. If bluetooth is disabled you will be asked to enable it. In the main part of the window will show detected bluetooth devices. Click on the device you wish to add and press next.
To move between cells press the arrow keys. To enter data into cells type in the keyboard. To sum data from cells in the cell where you want the sum is to press the button that looks like Σ character and then drag the mouse over the cells you want to add. To sort your cells in descending order press the button with bullet points and an arrow going down. To sort in ascending order press the button with bullet points and an arrow pointing upwards.
To save your spreadsheet you need to press the button that looks like a floppy disk, press the keyboard shortcut or go to file menu -> save. To open a file press the button that looks like a brown folder and add selct the file you want from the dialog.
To save your spreadsheet you need to press the button that looks like a floppy disk, press the keyboard shortcut or go to :menuselection:`file --> save`. To open a file press the button that looks like a brown folder and add selct the file you want from the dialog.
To copy data you can right click copy, press the button with two pieces of paper or press control + c. To paste data press control control +v, edit paste, right click paste or press the botton that is a clipboard with a piece of paper on it. To cut text press control+x or press the sciors button to cut text.
To copy data you can right click copy, press the button with two pieces of paper or press :kbd:`control + c`. To paste data press control :kbd:`control +v`, :menuselection:`edit --> paste`, right click paste or press the botton that is a clipboard with a piece of paper on it. To cut text press :kbd:`control+x` or press the sciors button to cut text.
To change the size of a row or colum of cells click in between the border of that particular row or column and drag with the mouse to give yourself room.
To undo a selection press :kbd:`control +z` or press the button with the arrow looping around and pointing to the left.
To zoom to view a full page on your spreadsheet in the menu :menuselection:`View --> Zoom --> Entire Page`. To view the whole width of your page on the menu :menuselection:`View --> Zoom --> Page Width`.
Screenshot
----------
@ -24,7 +28,7 @@ Lubuntu ships with version 6.1.1.2 of libreoffice Calc.
How to launch
-------------
To launch libreoffice calc in the menu go to Office -> Libreoffice Calc or run
To launch libreoffice calc in the menu go to :menuselection:`Office -> Libreoffice Calc` or run
@ -16,9 +16,11 @@ To open a previous presentation you have been working on press the button that l
To type text into a presentation click in one of the boxes for your theme and type in the text with controls for the text on the right hand side. To insert a picture press the button with what looks like a photograph of a tree and select the file you want to insert.
To change the zoom of you presentation :menuselection:`View --> Zoom --> Zoom` to bring up a window to manage your zoom.
On the left there is a panel showing what slides you currently have in left side of the window. To insert a new slide right click on this panel on the left and select new slide. To delete a slide on the left hand slide right click and select delete slide.
To start a slideshow press f5 or the button the looks like a tv with a triangle on it or slideshow -> start start slideshow. To exit the slideshow press escape. To get to the next slide of the slideshow click or press the right arrow key. to get to a previous slide in presentation mode press the left arrow key or right click previous.
To start a slideshow press :kbd:`f5` or the button the looks like a tv with a triangle on it or :menuselection:`slideshow --> start from the first slide.` To exit the slideshow press escape. To get to the next slide of the slideshow click or press the right arrow key. to get to a previous slide in presentation mode press the left arrow key or right click previous.
Screenshot
----------
@ -30,7 +32,7 @@ Version
How To launch
-------------
To launch go to the menu -> Office -> Libreoffice impress or run
To launch go to the menu :menuselection:`Office --> Libreoffice Impress` or run
@ -16,21 +16,27 @@ Lubuntu ships with libreoffice writer 6.1.1.2
Useage
------
To use libreoffice writer type what you wish to type into the main part of the window. If you wish to save your data press the icon that looks like a floppy disk or press control + s. To open a previously saved document press the button that looks like a folder or press control plus o. To load or save a file from the menu file -> open to open a file or file -> save. To have save your file as a pdf press the button that is a sheet of paper with curved red lines on it or go file -> export and select the file type as pdf.
To use libreoffice writer type what you wish to type into the main part of the window. If you wish to save your data press the icon that looks like a floppy disk or press :kbd:`control + s`. To open a previously saved document press the button that looks like a folder or press :kbd:`control + o`. To load or save a file from the menu :menuselection:`File --> Open` to open a file or :menuselection:`File --> Save`. To have save your file as a pdf press the button that is a sheet of paper with curved red lines on it or go :menuselection:`File --> Export` and select the file type as pdf.
To change the font size There is a drop down box with a number in it you can type the font size you want in this box or select from the dropdown menu. You can change the font with the drop down box to the left of the font size which you can type and it autocompletes the fonts or select from the drop down menu. To make your text bold you can select the text with the mouse and press the button that looks like **B** or press control + B. To make the font italic press the button that looks like *I* or press control + I after selecting the text or keep typing with it to be italic. To make strikethrough press the button that is a s with a line through it.
To change the font size There is a drop down box with a number in it you can type the font size you want in this box or select from the dropdown menu. You can change the font with the drop down box to the left of the font size which you can type and it autocompletes the fonts or select from the drop down menu. To make your text bold you can select the text with the mouse and press the button that looks like **B** or press :kbd:`control + B`. To make the font italic press the button that looks like *I* or press :kbd:`control + I` after selecting the text or keep typing with it to be italic. To make strikethrough press the button that is a s with a line through it.
To change font color press the button that has a T with a drop on it and a red underline this will bring down several differenent colors you can change your text to a color you want.
To make text superscript press the button with A and a smaller B located above it as if it in superscript. To make text subscript press the button that is an A with a smaller B located slightly below it.
To check the spelling of your document press the ABC button with a checkmark, from the menu -> tools spelling or press f7. After you are done writing your document you can press the button that looks like a printer to print, press control+ p or file -> print. To view your word count of how many words are currently in the document is with nothing slected at the bottom of the libreoffice writer window. If you select text with the mouse you can also see the word count of selection from the same spot.
To check the spelling of your document press the ABC button with a checkmark, from the menu -> tools spelling or press :kbd:`f7`. After you are done writing your document you can press the button that looks like a printer to print, press :kbd:`control+ p` or :menuselection:`file --> print`. To view your word count of how many words are currently in the document is with nothing slected at the bottom of the libreoffice writer window. If you select text with the mouse you can also see the word count of selection from the same spot.
To insert special symbols or characters press the button with the Ω symbol or from the menu Insert -> Special character. To insert a page break press control + enter or from the menu Insert -> Page Break.
To insert special symbols or characters press the button with the Ω symbol or from the menu :menuselection:`Insert --> Special character`. To insert a page break press :kbd:`control + enter` or from the menu :menuselection:`Insert --> Page Break`.
To undo a mistake you make press control + z or press the yellow arrow pointing to the left. If you accidently undid code redo or press the green arrow pointing to the right.
To undo a mistake you make press :kbd:`control + z` or press the yellow arrow pointing to the left. If you accidently undid code redo or press the green arrow pointing to the right.
To center your text is press the button with the horizontal lines centered or format -> align-> centered. To have your text justified to the right press the button with the lines on the right or format -> align -> right. To have your text aligned to left press the lines on the eleft with or format -> align -> left. To center justify your text which will add spaces in between words to make it appears at both orders press the button that has solid horizontal lines all of eqaul length to center justify the text.
To center your text is press the button with the horizontal lines centered or :menuselection:`format --> align --> centered`. To have your text justified to the right press the button with the lines on the right or :menuselection:`format --> align --> right`. To have your text aligned to left press the lines on the left with or :menuselection:`format --> align --> left`. To center justify your text which will add spaces in between words to make it appears at both orders press the button that has solid horizontal lines all of eqaul length to center justify the text.
To insert an image into your go to :menuselection:`Insert --> Image` to insert an image directly to your word processing document. To move your image around left click on it and drag the image around. To resize the image while keeping the same aspect ratio click on one of the blue boxes around the corner to resize the image.
To select all text in the document press :kbd:`control + A` or :menuselection:`Edit --> Select All`.
To zoom for the entire page to be visible :menuselection:`View --> Zoom --> Entire Page`. To zoom so you can see the width of the page and everything is bigger :menuselection:`View --> Zoom ---> Page width`.
Screenshot
----------
@ -38,7 +44,7 @@ Screenshot
How to Launch
-------------
To launch go to menu -> office -> libreoffice writer or run
To launch go to menu :menuselection:`office --> libreoffice writer` or run
To open a pdf file use File -> Open from the menu or Ctrl + O on the keyboard. If you have a pdf open use File -> Open in new tab from the menu, click the Open in new tab button or press Ctrl + T. To refresh a pdf click the Refresh button or press F5 just like most web browsers. To switch between tabs on the keyboard you can press control control +tab to go the next tab or control shift tab to cycle through your tabs in the opposite direction. At the bottom of the tab menu will be a list of all your tabs you have open with the title of each document.
To open a pdf file use :menuselection:`File --> Open` from the menu or :kbd:`Control + O` on the keyboard. If you have a pdf open use :menuselection:`File --> Open` in new tab from the menu, click the Open in new tab button or press :kbd:`Control + T`. To refresh a pdf click the Refresh button or press :kbd:`F5` just like most web browsers. To switch between tabs on the keyboard you can press control :kbd:`control +tab` to go the next tab or :kbd:`control + shift + tab` to cycle through your tabs in the opposite direction. At the bottom of the tab menu will be a list of all your tabs you have open with the title of each document.
If you want to view a particular page select the box (e.g. page 1/3) and tpye the page number (e.g. page 3/3). To move to the previous and next page use the left and right arrow buttons respectively. There are numerous zoom option, including percentage, page width, page size, continous, and multiple pages.
If you want to view a particular page select the box (e.g. page 1/3) and tpye the page number (e.g. page 3/3). To move to the previous and next page use the left and right arrow buttons respectively. There are numerous zoom option, including percentage, page width, page size, continous, and multiple pages. Another way to jump to a particular page is to press :kbd:`control + j` or :menuselection:`Edit --> Jump to Page`. To go back to page which you have just come from press :kbd:`control + enter` or :menuselection:`Edit --> Jump backward`. To jump forward a page press control + shift + enter or :menuselection:`Edit --> Jump Forward`
qpdfview also includes some very useful docks. To view the outline dock, in the menu select View -> Docks -> Outline (make sure the button is checked) or press F6 on the keyboard. It should appear on the left hand side of the pdf with collapsable sections. This is useful in navigating large pdfs.
qpdfview also includes some very useful docks. To view the outline dock, in the menu select :menuselection:`View --> Docks --> Outline (make sure the button is checked)` or press :kbd:`F6` on the keyboard. It should appear on the left hand side of the pdf with collapsable sections. This is useful in navigating large pdfs. To see a thumbnail of each page :menuselection:`View --> Dock --> Thumbnails` or press :kbd:`f8` to view a thumbnial of each page of the pdf file. If you want to close one of these docks click the X button on the dock to close it.
To search through your pdf file you can press control + f or from the menu edit -> search. You will get taken to the results and will appear highligheted in yellow to see through the results you can press the down arrow to see results farther in the document and press the up arrow to see results towards the start of the document.
To view two pages at once like if you want to see a two page spread of an illustration in a pdf of a book press :kbd:`Control + 6` or :menuselection:`View --> Two pages`. To get your view back to normal press :kbd:`Control +6` agian or :menuselection:`View --> Two pages` again.
To make qpdfview fullscreen you can press f11. To enter presentation mode you can press f12 wihch is makes the content of the pdf take up the fullscreen and gives you no menubars. To exit presentation mode you can press f12 again. To advance to the next page in the presentation press the spacebar or the right arrow. To go back a page in presentation press the left arrow.
To search through your pdf file you can press :kbd:`control + f` or from the menu :menuselection:`edit --> search`. You will get taken to the results and will appear highligheted in yellow to see through the results you can press the down arrow to see results farther in the document and press the up arrow to see results towards the start of the document.
If you have a particularly long pdf file you might want to make a bookmark to find a specific thing easily. To create a bookmark press control +B or Bookmarks -> Add Bookmark and give the bookmark a memorable title and description so you can find it in this document again easily. If you later want to remove the bookmark go bookmarks -> remove bookmark or press control+ shift+ B.
To make qpdfview fullscreen you can press :kbd:`f11`. To enter presentation mode you can press :kbd:`f12` wihch is makes the content of the pdf take up the fullscreen and gives you no menubars. To exit presentation mode you can press :kbd:`f12` again. To advance to the next page in the presentation press the spacebar or the right arrow. To go back a page in presentation press the left arrow.
To sleect page width in zoom in qpdfview is a drop down menu with page width to show the width of the page on qpdfview. To view the whole page on qpdfview in this drop down menu select whole page. To return to the original zoom press :kbd:`Control + 0` or :menuselection:`View --> Original size`. To zoom in is press the magnifying glass with a + in it or press :kbd:`Control + +` or :menuselection:`View --> Zoom in`. To zoom out press the magnifying glass button with a - in it or press :kbd:`Control + -` or menuselection:`View --> Zoom out`. To rotate the file to the left is press :kbd:`Control + Left` or :menuselection:`View --> Rotate Left`. To rotate the file to the right is press :kbd:`Control + Rights` or :menuselection:`View --> Rotate Right`.
If you have a particularly long pdf file you might want to make a bookmark to find a specific thing easily. To create a bookmark press :kbd:`control +b` or :menuselection:`Bookmarks --> Add Bookmark` and give the bookmark a memorable title and description so you can find it in this document again easily. If you later want to remove the bookmark go :menuselection:`bookmarks --> remove bookmark` or press :kbd:`control+ shift+ B`.
To jump to the start of a pdf file press the :kbd:`home` key or :menuselection:`Edit --> First Page`. To jump to the last page of a pdf file press the :kbd:`end` key or :menuselection:`Edit --> Last Page`.
Screenshot
----------
@ -38,7 +44,7 @@ Lubuntu ships with version 0.4.17 of qpdfview.
How to launch
-------------
To launch qpdfview go to the Menu -> Office -> qpdfview or run
To launch qpdfview go to the Menu :menuselection:`Office --> qpdfview` or run
To use lximage use the arrow to the right to view the next file in the folder and the arrow to the left to view the previous folder. To open a new picture press the open button which looks like a blue folder with a piece of paper in it. To save the file as something press the button that looks like a floppy disk.
If you wish to print a picture after viewing it from the file menu -> print or press control+ p to bring up a print dialog.
If you wish to print a picture after viewing it from the :menuselection:`file --> print` or press :kbd:`control+ p` to bring up a print dialog.
To rotate an image to the right press the circular arrrow that points to the right or go to edit -> rotate clockwise. To rotate conterclockwise use the circular arrow pointing to the left or edit ->rotate conterclockwise. To zoom in on a picture press the icon with a magnifying glass with a + symobol on it or press control + +. To zoom out press the button of a magnifying glass with a - symbol in it or press control + -.
To rotate an image to the right press the circular arrrow that points to the right or go to :menuselection:`edit --> rotate clockwise`. To rotate conterclockwise use the circular arrow pointing to the left or :menuselection:`edit -->rotate conterclockwise`. To zoom in on a picture press the icon with a magnifying glass with a + symobol on it or press :kbd:`control + +`. To zoom out press the button of a magnifying glass with a - symbol in it or press :kbd:`control + -`.
To view the next picture on your image press the right arrow and conversly to view the previous image press the left arrow. To view thumbnials of the current directory you can toggle thumbnials and thumbnails will show at the buttom with a scrollbar at the bottom of the window to view the whole folder.
To view the picture entirely at its original size press :menuselection:`View --> Fit` or the button with a veritcial and horizontal arrow and a folded over buttom right corner. To return your image to its original size press the magnifying button with 1:1 inside it or :menuselection:`View --> Original Size`.
To view the picture as fullscreen press :kbd:`f11` or :menuselection:`View --> Fullscreen`.
Screenshot
----------
..image:: LXImage.png
@ -23,7 +27,7 @@ Lubuntu ships with version 0.7.0 or lximage.
How to launch
-------------
To launch lximage from the menu -> graphics - > lximage or run
To launch lximage from the menu :menuselection:`graphics --> lximage` or run
To use screenshot the whole screen takes a screenshot of your entire screen, current window only takes only the current window and capture an area of the screen lets you select an area interacetively. To start the interactive area left click and then drag the mouse in a rectangle to select the area you want to take a screenshot. There is also a delay for the screenshot you can set like a timer for a camera in the bottom right corner of the screen.
To have your titlebar and frame around the window on a current window is a checkbox on the bottom. The include mouse cursor will include your mouse cursor in the screenshot.
After taking your screenshot it will open up in the image viewer and to save it press :kbd:`Control + S` or :menuselection:`File --> Save`.
Screenshot
----------
..image:: screenshot.png
@ -17,7 +21,7 @@ Lubuntu ships with version 0.7.0 of screenshot.
How to Launch
-------------
To launch screenshot from the menu -> Grapics -> Screenshot or run
To launch screenshot from the menu :menuselection:`Grapics --> Screenshot` or run
@ -9,17 +9,19 @@ Lubuntu ships with version 2.1.0 of skanlite.
Useage
------
To preview what you want to scan press the preview button and you can make sure the scan is in a good position. With this done you can press the scan button to scan the document after this a dialog will show up asking you were to save what you are scanning.
To preview what you want to scan press the preview button and you can make sure the scan is in a good position. With this done you can press the scan button to scan the document after this a dialog will show up asking you were to save what you are scanning. If you want to cancel your scan midway through the scan click on the red x button to cancel the scan while the scan is in progress.
To change the dpi or dots per inch is the dpi drop down menu for scanner resolution but keep in mind the higher the number of dpi the better the picture quality but the longer it will take to scan. The scan mode changing allows you to select color to select color scanning or gray to only show your scan in gray and not use color ink if you would want to print it out again.
To zoom in press the magnifying glass button with a plus sign conversely to move out press the magnifying glass button with a minus sign. To change your resolution change the scan resolution drop down and select the dots per inch you want to use.
To change the brightness of a scan slide the slider or input an a positive or negative number into the the numeric field. To change constrast slide the slider or input a positive or negative number in the numeric field.
To clear selections that can be automatically selected but canceled with a brown smudge with an x on it.
To select part of a scan you particularly want to save is to click over a preview of a scan and you will drag the selection with the mouse. To clear selections that can be automatically selected but canceled with a brown smudge with an x on it.
How to launch
-------------
To launch skanlite turn on your scanner and that it is connected to your computer. To launch the application go to the menu -> graphics -> skanlite or run
To launch skanlite turn on your scanner and that it is connected to your computer. To launch the application go to the menu :menuselection:`graphics --> skanlite` or run
If you wish to open a text file press the button that looks like a black and white folder or press control + o to open a file. To open a new file press the button that looks like a piece of paper with a plus sign. To save your file after typing in the main part of the window press the button that looks like a floppy disk or press controlTo save your file after typing in the main part of the window press the button that looks like a floppy disk or press control +s. To reload a file if something else has changed that file in featherpad press the arrow that loops back on itself to reload the page.
If you wish to open a text file press the button that looks like a black and white folder or press :kbd:`control + o` to open a file. To open a new file press the button that looks like a piece of paper with a plus sign. To save your file after typing in the main part of the window press the button that looks like a floppy disk or press controlTo save your file after typing in the main part of the window press the button that looks like a floppy disk or press :kbd:`control +s`. To reload a file if something else has changed that file in featherpad press the arrow that loops back on itself to reload the page.
To type things into your text file the main part of the window similar to a word porcessor. If you are programming with featherpad the file extension will probably automatically select the correct syntax highlighting. To view line numbers of the file press control +l or options -> line numbers.
To type things into your text file the main part of the window similar to a word porcessor. If you are programming with featherpad the file extension will probably automatically select the correct syntax highlighting. To view line numbers of the file press :kbd:`control +l` or :menuselection:`options --> line numbers`.
To open a new tab and empty text file press the button with a piece of paper with a plus symbol on it. If you wish to close a tab press the red x button.
If you make a mistake and want to undo it press control + z or press the button that looks like a curved arrow pointing towards the left. To redo a change you have undone press the button with a curved arrow pointing towards the right.
If you make a mistake and want to undo it press :kbd:`control + z` or press the button that looks like a curved arrow pointing towards the left. To redo a change you have undone press the button with a curved arrow pointing towards the right.
To search your text file press Control + F or search find from the menu. Then in the bar on the bottom search for the text you want. Press the down arrow to move to the next result and the up arrow to move for the previous result in the text file. To jump to a particular line in a file press control +j or search jump to or the button that looks like >>. Then in the bar at the bottom type in what line you want to jump to. To find and replace text press control +r or search -> Replace. Type the text you want to Find in the find field and type what you want to put in with the Replace with field and then press enter to finish the finding and replacing through the whole file.
To search your text file press :kbd:`Control + f` or :menuselection:`search --> find` from the menu. Then in the bar on the bottom search for the text you want. Press the down arrow to move to the next result and the up arrow to move for the previous result in the text file. To jump to a particular line in a file press :kbd:`control +j` or search jump to or the button that looks like >>. Then in the bar at the bottom type in what line you want to jump to. To find and replace text press :kbd:`control +r` or :menuselection:`search --> Replace`. Type the text you want to Find in the find field and type what you want to put in with the Replace with field and then press enter to finish the finding and replacing through the whole file.
To change what font you want select option -> font to change your font sizes. To change each font on the on the font level. To change the size type the size you or select it from the drop down menu. To select a font size simply use a font style of italic or oblique.
To change what font you want select :menuselection:`option --> font` to change your font sizes. To change each font on the on the font level. To change the size type the size you or select it from the drop down menu. To select a font size simply use a font style of italic or oblique.
To print a text file -> Print or press control + p.
To print a text :menuselection:`file --> Print` or press :kbd:`control + p`.
Screenshot
----------
@ -39,7 +39,7 @@ Lubuntu ships with version 0.9.0 of featherpad.
How to Launch
-------------
In the menu go to Acessories -> featherpad or run
In the menu go to :menuselection:`Acessories --> featherpad` or run
@ -19,16 +19,16 @@ To do simple arithmetic click the numbers and then press the sign for addition,
To make a number negative press the button that looks like a +/-. To insert decimals press the decimal point button which looks like . when you get to the part which is less than a whole number. To clear input from Kcalc Press the button with a C on it. To group operations so they happen together use the parenthesis to make things grouped to gether for example 2*(2+3) would give the result of 10 because it would add 2 and 3 and then multiply by two.
To copy and answer out of Kcalc press control + c or edit -> copy from the menu. To paste a number into Kcalc you can press control + v or edit -> paste from the menu. To cut the text from Kcalc press control +x or edit -> cut from the menu.
To copy and answer out of Kcalc press :kbd:`control + c` or :menuselection:`edit --> copy` from the menu. To paste a number into Kcalc you can press :kbd:`control + v` or :menuselection:`edit --> paste` from the menu. To cut the text from Kcalc press :kbd:`control +x` or :menuselection:`edit --> cut` from the menu.
Scientific calculator mode advanced fuctionality
------------------------------------------------
If you want even more functionality of Kcalc there is also scientific mode which is acessed from settings and the scientific mode radio button. The button 1/x takes takes 1 and divides it by the number currently on the calculator also known as taking the reciprocal. x! read x factorial will take the number X you entered and multiple each number going down to 1 for example 5! would multiply 5*4*3*2*1.
If you want even more functionality of Kcalc there is also scientific mode which is acessed from :menuselection:`settings --> scientific mode` radio button. The button 1/x takes takes 1 and divides it by the number currently on the calculator also known as taking the reciprocal. x! read x factorial will take the number X you entered and multiple each number going down to 1 for example 5! would multiply 5*4*3*2*1.
The x squared button will take a x*x and multiply it by itself. The button with x and a superscript y will take x the number you have in will exponeniate x to the power of y. The x 10 with a supercript y will end up multiplying x by 10 to the power of y so for example to multiply 5 by 10 to the power of 3 entering in will give the answer of 5,000.
To change the unit that angles are measured in for triginometric units in Kcalc. Degrees take 360 to form a full circle while, 2Π radians form a full circle and 400 gradians form a full circle. The radio button for Deg is to select Degrees as the unit for angles, Rad selects radian as the unit of measurment of angles and Grad selects Gradians as the unit of measurement for angles. The Sin button takes what you have as the input and takes the trigonometric sine function of that value measured in the unit for angles you have selected. The cos button takes the cosine of the vlaue in the unit of angle you have selected.
To change the unit that angles are measured in for triginometric units in Kcalc. Degrees take 360 to form a full circle while, 2Π radians form a full circle and 400 gradians form a full circle. The radio button for Deg is to select Degrees as the unit for angles, Rad selects radian as the unit of measurment of angles and Grad selects Gradians as the unit of measurement for angles. The Sin button takes what you have as the input and takes the trigonometric sine function of that value measured in the unit for angles you have selected. The cos button takes the cosine of the vlaue in the unit of angle you have selected. The tan button takes the tangent of the angle in the current units.
..image:: kcalc-scientific.png
@ -38,7 +38,7 @@ Lubuntu ships with version 18.04.3 of Kcalc.
How to launch
-------------
To launch kcalc go to accessories -> Kcalc or run
To launch kcalc go to :menuselection:`accessories -> Kcalc` or run
@ -17,13 +17,13 @@ Along the top to create a new tab in pcmanfm-qt you can use the button with a fi
If you single click on a file you will select it. If you double click on it you will open it in the default program to open that file. If you right click on a file you can select which program to open a file with if you have multiple programs to open it. If you want to selct multiple files you can hold down control and select the files. To copy files select the file right click copy or press control +c. To cut files select them right click cut and or press control + x. After copying or cutting a file you can paste them with right click paste or press control +v.
To connect to a remote server such as a NAS go to the go menu -> Connect to server and authenticate to your remote storage. If you want to plug in removeable storage you can open the storage on the left with devices. This also happens other internal filesystems on your computer. To eject removeable media press the button on the left with a circled up arrow to eject.
To connect to a remote server such as a NAS go to the :menuselection:`go --> Connect to server` and authenticate to your remote storage. If you want to plug in removeable storage you can open the storage on the left with devices. This also happens other internal filesystems on your computer. To eject removeable media press the button on the left with a circled up arrow to eject.
To see hidden files press control +h or go to view -> show hidden. To open a terminal in your current folder press f4 or Tool -> Open terminal from the menu. To search for files press f3 or tool -> search for files. To view the properties of a file or folder right click on it and select properties from the menu. General will show you the size of the file where the file is and when it was last modified or accessed. The permissions tab will show you who owns the file which if you can't change it will be grayed out and who has permisson to read modify and execute the file.
To see hidden files press control +h or go to:menuselection:`view -> show hidden`. To open a terminal in your current folder press f4 or :menuselection:`Tool --> Open terminal` from the menu. To search for files press f3 or :menuselection:`Tool --> search` for files. To view the properties of a file or folder right click on it and select properties from the menu. General will show you the size of the file where the file is and when it was last modified or accessed. The permissions tab will show you who owns the file which if you can't change it will be grayed out and who has permisson to read modify and execute the file.
Pcmanfm-qt can actually launch other applications in places Applications and then gets all the tasks in the menu in lxqt-panel.
To add a bookmark press control +D and it will make a bookmark.
To add a bookmark :menuselection:`Bookmarks --> Add to Bookmarks` and it will make a bookmark. To later access this bookmark it will be on the left hand side under bookmarks and under the bookmarks menu.
Screenshot
----------
@ -44,4 +44,4 @@ To open PCManFM in your current directory (in terminal), execute
Feel free to append [lxqt-sudo] to run PCManFM-Qt as root.
You can also go to the Applications Menu > Accessories > PCManFM-Qt File Manager.
You can also go to the Applications menu :menuselection:`Accessories --> PCManFM-Qt File Manager`.
@ -6,7 +6,7 @@ Qlipper is a clipboard manager that is included by default on Lubuntu.
Useage
------
To use qlipper it is autostarted in the panel and click on the system tray icon that looks like a clipboard or you can press Control+Alt+v. If you really want an item to always show up right click on the clipboard and press the configure wrench icon click on the sticky items divider and press the add button and add what you want always to be listed in qlipper.
To use qlipper it is autostarted in the panel and click on the system tray icon that looks like a clipboard or you can press :kbd:`Control+Alt+v`. If you really want an item to always show up right click on the clipboard and press the configure wrench icon click on the sticky items divider and press the add button and add what you want always to be listed in qlipper. To change how many items get displayed in qlipper in total right click on qlipper and configure with the wrench icon and change clipboard entries count to your desired number of entries. To change how many characters show up on qlipper from the same configuration screen change maximum display size. If you want to clear your clipboard history right click on the tray icon and clear clipboard history.
Screenshot
----------
@ -18,7 +18,7 @@ Lubuntu ships with version 5.1.1 of Qlipper.
How to launch
-------------
By default qlipper should autostart and should be on the bottom right of your panel. If you need to get it running and it is not go to the menu -> Accessories -> Qlipper.
By default Qlipper should autostart and should be on the bottom right of your panel. If you need to get it running and it is not go to the menu :menuselection:`Accessories --> Qlipper`.
To start a new note right click on the right hand column new note or :menuselection:`Edit --> New Note`. Then enter a title for this note. To open a note double click on that note from the right hand column which will open a new window with your note in it. To input text in the note type in the main body of this window after clicking on it.
to bring back up your note noblenote will leave a notebook icon in the system tray on the lower right hand corner of the panel by default which can bring back up the noblenote window.
Screenshot
----------
@ -14,7 +19,7 @@ Screenshot
How to launch
-------------
To launch noblenote go to the menu -> Acessories -> noblenote or run
To launch noblenote go to the menu :menuselection:`Acessories --> noblenote` or run
To play 2048-qt you use the arrows keys to combine blocks with the same number on them.
To play 2048-qt you use the arrows keys to combine blocks with the same number on them without having no possible moves at which point the game is over. As you combine numbers your score increases by the sum of the new block(s) you make and is shown towards the upper right hand corner of the window. Your high score is the best you have done at this game and is also shown towards the upper right hand corner.
If midway you want to restart to a new game press the new game button on the right hand side or :menuselection:`File --> New Game`.
Screenshot
----------
@ -16,7 +18,7 @@ Version
Lubuntu ships with version 0.1.6 of 2048-Qt.
How to launch
-------------
To launch 2048-qt go to the menu -> games -> 2048-qt or run
To launch 2048-qt go to the menu :menuselection:`games -> 2048-qt` or run
@ -5,21 +5,25 @@ VLC is the default media player for Lubuntu that can open both audio and video f
Useage
------
To open media stored locally on your system click media open file and navigate your local files or press control +o on the keyboard to open files stored locally on your machine. If you wish to open media from somewhere on the internet on media press open network stream or press control n. To pause playback of a file press the button that look like two verical lines. To resume playback press the right playback button. To toggle fullscreen press the button which has the four corners of the screen to make it fullscreen and the four screens to have it back into windowed mode.
To open media stored locally on your system click media open :menuselection:`media --> Open file` and navigate your local files or press :kbd:`control +o` on the keyboard to open files stored locally on your machine. If you wish to open media from somewhere on the internet on :menuselection:`media --> open network stream` or press :kbd"`control + n`. To open a whole directory use :menuselection:`media --> Open Directory` or press :kbd:`control +F`.
On the bottom right of vlc there is a bar that gets wider for volume. Click farther to the right to increase volume within vlc. Or hover the cursor over this bar and use the mousewheel to control volume. The button that looks like a speaker next to this toggles mute in vlc.
To pause playback of a file press the button that look like two verical lines. To resume playback press the right playback button. To toggle fullscreen press the button which has the four corners of the screen to make it fullscreen and the four screens to have it back into windowed mode.
On the bottom right of vlc there is a bar that gets wider for volume. Click farther to the right to increase volume within vlc. Or hover the cursor over this bar and use the mousewheel to control volume. The button that looks like a speaker next to this toggles mute in vlc. Another way to mute the volume is to :menuselection:`Audio --> Mute`.
To make the same sound come out of both speakers go to :menuselection:`Audio --> Stereo mode --> Mono`. The sound to make a different left and right channel on each speaker will be :menuselection:`Audio --> Stereo Mode --> Stereo`. To make all sound come from the left channel :menuselection:`Audio --> Stereo Mode --> Left` and likewise for Right.
To see how long you have been watching the current piece of media counts up above the play pause button in a time. At the other side a number will show the length of the media you are playing and inbetween is a slider with the current time. Moving the slider to the left will rewind playback while moving it to the left will fast forward playback.
To open an equalizier press the button that looks like several physical slider swichtes and on the audio effects equalizer tab press enable on the equalizer. Then to increase or decrease the sound at each frequency up to increase the volcume at that frequency.
To view a playlist of music or videos you can view press the button that is several horizontal lines and then a trianglular play button on it. This will bring up a whole view of your playlist. To add more files to your playlist right click on the bottom of the playlist window and click add file to add an additonal file. To move the playlist to a particular file and to have that play double click that file.
To view a playlist of music or videos you can view press the button that is several horizontal lines and then a trianglular play button on it or press :kbd:`Control + l`. This will bring up a whole view of your playlist. To add more files to your playlist right click on the bottom of the playlist window and click add file to add an additonal file. To move the playlist to a particular file and to have that play double click that file. To change the view of the playlist right click playlist view mode to the version of the playlist you like the look of the best.
To loop the current playlist over and over press the button with an arrow pointing to the right and then another arrow below it pointing to the left.
To randomize your playlist press the button with two crossing arrows on it.
To speed up playback faster than normal press the :kbd:`+` key or use :menuselection:`Playback --> Speed --> Faster`. To slow down playback slower than normal press the :kbd:`-` key :menuselection:`Playback --> Speed --> Slower`.
Screenshot
----------
..image:: vlc.png
@ -30,7 +34,7 @@ Lubuntu ships with version 3.0.4 of VLC.
How to launch
-------------
to launch vlc in the menu go to Sound and video --> VLC media player or run
to launch vlc in the menu go to :menuselection:`Sound and video --> VLC media player` or run
@ -13,7 +13,7 @@ To use a virtual keyboard click on the icon in the system tray that looks like a
How to launch
-------------
To launch the fcitx applet from the menu -> system tools -> fcitx with icon with a penguin with a paintbrush. If you wish to run the applet from the command line run
To launch the fcitx applet from the menu :menuselection:`system tools --> fcitx` with icon with a penguin with a paintbrush. If you wish to run the applet from the command line run
@ -5,11 +5,11 @@ qterminal is the default terminal of Lubuntu that also has a drop down version.
Useage
------
To open a new tab go to the file menu -> new tab or press control shift t with the button that looks like a +. To close a tab press the X button near the right hand side of the tab. If you want to switch between tabs click on the different click on that tab or press the left and right arrows in the upper right corner on the tabbar. Another way to switch between tabs is control + page up or control plus page down. If you want to copy text from the temrinal press control + shift + c to copy text. If you wish to paste text into the terminal you can control + shift + v however you should be really careful it is not a malicious command and shows the command you are pasting in. If you want to open a new terminal window Control+ Shift+ N or go file -> new window.
To open a new tab go to the :menuselection:`file --> new tab` or press :kbd:`control + shift + t` or click the button that looks like a +. To close a tab press the X button near the right hand side of the tab. If you want to switch between tabs click on the different click on that tab or press the left and right arrows in the upper right corner on the tabbar. Another way to switch between tabs is :kbd:`control + page up` or :kbd:`control + page down`. If you want to copy text from the temrinal press :kbd:`control + shift + c` to copy text. If you wish to paste text into the terminal you can :kbd:`control + shift + v` however you should be really careful it is not a malicious command and shows the command you are pasting in. If you want to open a new terminal window :kbd:`Control+ Shift+ N` or go :menuselection:`file --> new window`.
Customizing
-----------
To change your prefrences go to file -> prefrences. To change your font press the font change the font and size press the change button in the prefrences dialog. The color scheme field lets you say change how different colored things in the terminal colors appear. The widget style lets you overwrite the system widget style with something other than system default. The scrollbar position lets you move the scrollbar to the left or right or remove it entirely. The tabs position moves the bar to that part of the window of qterminal.
To change your prefrences go to :menuselection:`file --> prefrences`. To change your font press the font change the font and size press the change button in the prefrences dialog. The color scheme field lets you say change how different colored things in the terminal colors appear. The widget style lets you overwrite the system widget style with something other than system default. The scrollbar position lets you move the scrollbar to the left or right or remove it entirely. The tabs position moves the bar to that part of the window of qterminal.
The box for showing close button on each tab if unchecked will not have a button to close each tab will not have the red x button on each tab.
@ -26,13 +26,13 @@ Screenshot
How to launch
-------------
To launch qterminal in a normal window go to the menu -> System Tools -> qterminal or run
To launch qterminal in a normal window go to the menu :menuselection:`System Tools --> qterminal` or run
..code::
qterminal
from the command line. To launch a drop down version of Qterminal from the menu -> System Tools -> qterminal drop down or run
from the command line. To launch a drop down version of Qterminal from the menu :menuselection:`System Tools --> qterminal drop down` or run
@ -9,17 +9,21 @@ Lubuntu ships with version 1.10.18 of qps.
Useage
------
To see your memory useage in qps look at the bar that says MEM. The bar for CPU useage shows CPU useage with a bar graph with useage with a bar graphc for cpu useage. The Uptime in the top bar shows how long your computer has been running.
To see your memory useage in qps look at the bar that says MEM. The bar for CPU useage shows CPU useage with a bar graph with useage with a bar graphc for cpu useage. The Uptime in the top bar shows how long your computer has been running. A blue bar showing file input output shows graph in blue. Above this there is a green graph that shows your CPu useage as a graph.
To sort your processes by memory click on the mem tab. To have your processes sorted by CPU percentage press the button CPU% To have your processes sorted by CPU%. To sort by the command line of each process you can press the command line.
To change the update period is to :menuselection:`Option --> Update Period`. To change your font :menuselection:`Option --> Prefrences` or put an appearance with the font and font size.
To search for a particular process you can type your type into the search bar right above a particular process right above it. To terminate a process right click on it and select terminate or press :kbd:`delete`. To kill a process move the mouse over it right click and select kill or press :kbd:`Alt + K`.
Screenshot
----------
..image:: qps.png
How to launch
-------------
To launch qps go to the menu -> System Tools -> qps or run
To launch qps go to the menu :menuselection:`System Tools --> qps` or run
LXQt-sudo is a way to launch graphical applications with adminsitrative privledges.
LXQt-sudo is a way to launch graphical applications with adminsitrative privileges.
Useage
------
@ -9,9 +9,9 @@ LXQt-sudo is used to open graphical programs as an administrator.
..warning::
Modifying the wrong system configuration files with adminstrator privledges could make your system unable to boot or for you to be unable to login.
Modifying the wrong system configuration files with adminstrator privileges could make your system unable to boot or for you to be unable to login.
To use lxqt-sudo is important to not change your config files as if you did with sudo. You will need adminstartive privledges to edit config files but make sure you know what you are doing.
To use lxqt-sudo is important to not change your config files as if you did with sudo. You will need adminstrative privileges to edit config files but make sure you know what you are doing.
Version
-------
@ -20,7 +20,8 @@ Lubuntu ships with 0.13.0 of lxqt-sudo.
How to Launch
-------------
To launch lxqt-sudo from the command line to run featherpad with administrative privlideges use
To launch lxqt-sudo from the command line to run featherpad with administrative privileges use
To launch monitor settings from the menu -> Prefrences -> LXQt settings -> Monitor settings. From lxqt-configuration-center press the button for monitor settings that looks like a desktop monitor or run
To launch monitor settings from the menu :menuselection:`Prefrences --> LXQt settings --> Monitor settings`. From lxqt-configuration-center press the button for monitor settings that looks like a desktop monitor or run
To launch openbox settings from the menu -> Prefrences -> LXQt settings -> openbox settings. From LXQt settings press the openbox settings button with the wrench and screwdriver on a computer window or run
To launch openbox settings from the menu :menuselection:`Prefrences --> LXQt settings --> openbox settings`. From LXQt settings press the openbox settings button with the wrench and screwdriver on a computer window or run
@ -19,7 +19,7 @@ Lubuntu ships with version 0.13.0 of Power Management.
How to Launch
-------------
To launch Power Management from the menu -> Prefrences -> LXQt settings -> Power Management. From LXQt configuration center press the power management icon that looks like a light bulb or run
To launch Power Management from the menu :menuselection:`Prefrences --> LXQt settings --> Power Management`. From LXQt configuration center press the power management icon that looks like a light bulb or run
@ -9,7 +9,9 @@ To change the window manager used by LXQt, on the basic settings tab use the dro
The checkbox for ask confirmation for leaving session gives you a simple yes no dialog to amke sure you really want to leave so you do not lose your work uncheck it if you do not want this and find this dialog annoying. The lock screen before suspending /hibrenating locks your screen before suspending and hibernating and is checked by default unchecking this will leave this so the screen is not unlocked after suspending or hibernating.
The auto-start applications lets you choose which applications to auto-start like managers for print queues. All of these are check-boxes to start various programs. You can start a program at startup by adding it here. Click the add button, give the process a name e.g. "Terminal drop down" and type in the appropriate terminal command e.g. "terminal -d"
The autostart applications lets you choose which applications to autostart like managers for print queues. All of these are check-boxes to start various programs. You can start a program at startup by adding it here. Click the add button, give the process a name e.g. "Terminal drop down" and type in the appropriate terminal command e.g. "terminal -d"
If you want to undo changes you have done press the reset button with brown smudge with an X and reset on it.
Screenshot
----------
@ -23,7 +25,7 @@ Lubuntu ships with version 0.13.0 of session settings.
How to launch
-------------
To launch session settings from the menu -> Preferences -> LXQt settings -> session settings. From LXQt configuration center press the button that looks like a triangular blue flag and is labeled with session settings. To run session settings from the command line run
To launch session settings from the menu :menuselection:`Preferences --> LXQt settings --> session settings`. From LXQt configuration center press the button that looks like a triangular blue flag and is labeled with session settings. To run session settings from the command line run
To launch shortcut keys from the menu -> Prefrences -> LXQt settings -> shortcut keys. From LXQt configuration center use shortcut keys button which looks like 6 keyboard keys or from the command line run
To launch shortcut keys from the menu :menuselection:`Prefrences --> LXQt settings --> shortcut keys`. From LXQt configuration center use shortcut keys button which looks like 6 keyboard keys or from the command line run
To launch Users and groups from the menu -> Prefrences -> LXQt settings -> users and groups. From LXQt configuration center under system settings press the button that looks like two people. Or you can run
To launch Users and groups from the menu :menuselection:`Prefrences --> LXQt settings --> users and groups`. From LXQt configuration center under system settings press the button that looks like two people. Or you can run
@ -5,7 +5,7 @@ Pritners allows you to configure your printer and show your print queue.
Useage
------
To view your print queue right click on the printer and right click view print queue and if a job is held you can restart it.
To view your print queue right click on the printer and right click view print queue or with the printer slected press :kbd:`Control+F`and if a job is held you can restart it. To view the properties of printer or make changes with :menuselection:`Printer --> Properties`.
Version
-------
@ -13,7 +13,7 @@ Lubuntu ships with version 1.5.11 of printers.
How to launch
-------------
To launch printers from the menu -> Prefrences -> Printers or run
To launch printers from the menu :menuselection:`Prefrences --> Printers` or run
@ -21,9 +21,12 @@ To change the font size that desktop applications use choose the font tab and us
The cursor theme lets you change how the cursor looks with two themes installed by default but more available in the package repositories.
If you want to reset your changes you will need to click the reset button to revert your changes to how they were before.
How to launch
-------------
To launch appearnce in the menu -> prefrences -> Lxqt settings -> appearance. Another way is to press the Appearance button from LXQt configuration center or run
To launch appearnce in the menu :menuselection:`prefrences --> Lxqt settings --> appearance`. Another way is to press the Appearance button from LXQt configuration center or run
@ -17,7 +17,7 @@ Lubuntu ships with 0.13.0 of Brightness.
How to launch
-------------
To launch brightness from the menu -> Prefrences -> LXQt settings -> Brightness. Another way is to press the birghtness button on LXQt configuration center or run
To launch brightness from the menu :menuselection:`Prefrences --> LXQt settings --> Brightness`. Another way is to press the birghtness button on LXQt configuration center or run
@ -17,7 +17,7 @@ Lubuntu ships with version 0.13.0 of Date and time.
How to launch
-------------
To launch date and time from the menu -> Prefrences -> LXQt settings -> Date and Time. From LXQt configuration center under the system settings header at the bottom press the date and time button or from the command line run
To launch date and time from the menu :menuselection:`Prefrences --> LXQt settings --> Date and Time`. From LXQt configuration center under the system settings header at the bottom press the date and time button or from the command line run
To launch desktop from the menu -> prefrences -> LXQt settings -> Desktop. Or from LXQt configuration center press the desktop button to launch it or run
To launch desktop from the menu :menuselection:`Prefrences --> LXQt settings --> Desktop`. Or from LXQt configuration center press the desktop button to launch it or run
@ -18,7 +18,7 @@ Lubuntu ships with version 0.13.0 of desktop notifications.
How to launch
-------------
To launch Desktop notifications from the menu -> Prefrences -> LXQt settings -> Desktop Notifications. In lxqt-configuration center press the Desktop Notification button which looks like a giant !. To launch the configuration from the command line run
To launch Desktop notifications from the menu :menuselection:`Prefrences --> LXQt settings --> Desktop Notifications`. In lxqt-configuration center press the Desktop Notification button which looks like a giant !. To launch the configuration from the command line run
To launch Keyboard and Mouse use menu -> Prefrences -> LXQt settings -> keyboards and mouse. In LXQt configuration center press the keyboard and mouse button and keyboard and mouse or from the command line run
To launch Keyboard and Mouse use menu :menuselection:`Prefrences --> LXQt settings --> keyboards and mouse`. In LXQt configuration center press the keyboard and mouse button and keyboard and mouse or from the command line run
@ -4,7 +4,7 @@ Discover allows you to install and remove programs and utilities. It has a simpl
Usage
------
Discover allows you to search for applications by using the search box. Clicking on a program will give you a description of it. When installing or removing software, you will be prompted for your password. You can also browse through different categories on the left clicking on the different categories.i To move back from a category or search press the back button which functions similar to the back button in a web browser.
Discover allows you to search for applications by using the search box. Clicking on a program will give you a description of it. When installing or removing software, you will be prompted for your password. You can also browse through different categories on the left clicking on the different categories. To move back from a category or search press the back button which functions similar to the back button in a web browser. In the results after selecting your program you are looking at you can select a screenshot and get a bigger view of the screenshot click on the screenshot.
Discover allows you to update software using the Updates tab located on the bottom of the left column. You can click the button to "check for updates" manually.
@ -12,6 +12,8 @@ To remove software use the Installed tab. You can browse your installed packages
In the upper right corner of discover you can have a Sort category to sort your search results by name, rating, size, and release date.
Screenshot
----------
@ -24,7 +26,7 @@ Lubuntu ships with version 5.13.5 of Discover.
How to launch
-------------
To launch Discover from the menu -> System Tools -> Discover or run
To launch Discover from the menu :menuselection:`System Tools --> Discover` or run
@ -5,7 +5,7 @@ LXQt Panel is the bar situated at the bottom of your screen by default. The pane
Usage
------
The application menu allows you to browse and search through available programs; a keyboard shortcut is conveniently available for this. The desktop switcher allows you to switch to another virtual desktop, allowing you to keep your workspace organized. The quick launch bar allows you to conveniently launch your file explorer (PCManFM) and web browser (Firefox). To add a program to quick launch open the menu and find it there and drag it down onto the panel.
The application menu allows you to browse and search through available programs; a keyboard shortcut is conveniently available for this and is set to :kbd:`Alt +F1` by default. The desktop switcher allows you to switch to another virtual desktop, allowing you to keep your workspace organized. The quick launch bar allows you to conveniently launch your file explorer (PCManFM) and web browser (Firefox). To add a program to quick launch open the menu and find it there and drag it down onto the panel.
..image:: menu_search.png
@ -30,7 +30,9 @@ To change to a custom font color press the color button checkbox. Press the drop
The checkbox for override icon theme lets you choose a non system default icon theme for lxqt-panel. The dropdown then lets you see what that icon theme from the dropdown list. If you do not like your changes to the system you can press the reset button to reset changing to before trying to customize the panel.
To add a new widget click on the widget on the panel configuration screen and press the + button and select the widget you want to add some of which are not on the panel by default. To move an applet down on the order of presentation press the down arrow while the up arrow moves the applet up on the order of presentation. To remove an applet you do not want you can press the - button.
To add a new widget click on the widget on the panel configuration screen and press the + button and select the widget you want to add some of which are not on the panel by default. To move an applet down on the order of presentation press the down arrow while the up arrow moves the applet up on the order of presentation. To remove an applet you do not want you can press the - button. The wrench button has the settings for certain but not all of the applets in the panel for example the application menu and task manager are customizeable but quick launch and show desktop do not.
To configure options for your application menu right click on the menu configure application menu or from the panel configuration dialog with the widget selected for application menu click on the wrench button. The checkbox for icon lets you choose a custom icon to use in your menu if you want one and then the use the folder button to browse for the path of the custom file you want for your menu. The checkbox for menu text lets you add text that can be anything you want to your menu.
@ -7,7 +7,7 @@ Runner allows you to search for and launch applications and commands in the LXQt
Usage
------
To search for a program, press Alt + F2 and start typing a command. The search results will show below, similar to address bar behavior in browsers. All installed applications can be launched this way and lxqt-runner can configured to store a history of recent programs.
To search for a program, press :kbd:`Alt + F2` and start typing a command. The search results will show below, similar to address bar behavior in browsers. All installed applications can be launched this way and lxqt-runner can configured to store a history of recent programs.
Configuration
@ -26,7 +26,7 @@ Screenshot
How to launch
-------------
Runner should be running in the background and Alt + F2 should. If you need to manually start it for some reason run
Runner should be running in the background and :kbd:`Alt + F2` should bring it forward to launch an application. If you need to manually start it for some reason run
The command line is text interface to your computer and an alternative to graphical user interfaces like windows. It typically involves typing text commands into a terminal to perform some operation. Although not necessary to learn, it can be helpful. The terminal (Ctrl + Alt + T) is a command line running in a window.
The command line or cli is text interface to your computer and an alternative to graphical user interfaces like windows. It typically involves typing text commands into a terminal to perform some operation. Although not necessary to learn, it can be helpful. The terminal (Ctrl + Alt + T) is a command line running in a window.
An exhaustive tutorial on the command line is a bit beyond the scope of the manual. The man command brings up the user manual and can be used to learn more about a commands use, its options and inputs. If you wanted to learn more about the df (disk free) command, enter the following into a command line:
Lyn Perrine
6 years ago