manual/source/po/ru/LC_MESSAGES/2/2.2/2.2.6/qpdfview.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) 2016-2018, Lubuntu Team. This work is licensed under a
# Creative Commons Attribution 4.0 International License
# This file is distributed under the same license as the Lubuntu Manual
# package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2018.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: Lubuntu Manual 18.10\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-07-26 14:54-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.8.0\n"

#: ../../source/2/2.2/2.2.6/qpdfview.rst:2
msgid "Chapter 2.2.6 qpdfview"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:4
msgid "qpdfview is the default PDF viewer for Lubuntu."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:16
msgid "Features:"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:7
msgid "Tabs"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:8
msgid "Presentation mode"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:9
msgid "Zoom to entire page/ page width"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:10
msgid "Rotating pages"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:11
msgid "Outline, properties, thumbnail, and bookmark docks"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:12
msgid "Printing support"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:13
msgid "Annotation and highlighting"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:14
msgid "Bookmarks"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:15
msgid "Customizable keyboard shortcuts"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:16
msgid "Viewing postscript files"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:19
msgid "Usage"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:20
msgid ""
"To open a PDF file use :menuselection:`File --> Open` from the menu or "
"press :kbd:`Control + O` on the keyboard. If you have a PDF open use "
":menuselection:`File --> Open` in new tab from the menu, click the Open "
"in new tab button or press :kbd:`Control + T`. To refresh a PDF click the"
" Refresh button, :menuselection:`File --> Refresh`, or press :kbd:`F5` "
"just like most web browsers. To switch between tabs on the keyboard you "
"can press control :kbd:`control + tab` or :menuselection:`Tabs --> Next "
"Tab` to go the next tab or :kbd:`control + shift + tab` or "
":menuselection:`Tabs --> Previous Tab` to cycle through your tabs in the "
"opposite direction. At the bottom of the tab menu will be a list of all "
"your tabs you have open with the title of each document. To close the tab"
" press the red X button on the tab or press :kbd:`Control +W`. To close "
"all tabs on qpdfview press :kbd:`Control + Shift +W`. To restore the most"
" recently closed tabs press :kbd:`Alt+Shift+W` or :menuselection:`Restore"
" most recently closed tab`. To view a menu with your recently closed tab "
":menuselection:`Tabs --> Recently Closed` and select the file you want. "
"To see a list of all your tabs in a menu they are at the bottom of the "
":menuselection:`Tabs` menu."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:22
msgid ""
"If you want a second copy of a PDF file open right click on the tab and "
":menuselection:`Open Copy in new tab`. If you want a copy of the current "
"PDF on the tab and select :menuselection:`Open Copy in new window`. To "
"open your file manager in the current directory right click on the tab "
"and :menuselection:`Open Containing Folder`. To close all tabs right "
"click on the tab bar and :menuselection:`Close all tabs`. To Close all "
"tabs but that one you right click on right click on a tab and "
":menuselection:`Close all tabs but this one`. To close all tabs to the "
"right of the one you right click right click on a tab and "
":menuselection:`Close all tabs to right`. To close all tabs to the left "
"right click on a tab and :menuselection:`Close all tabs to left`."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:26
msgid ""
"If you want to view a particular page select the box (e.g. page 1/3) in "
"towards the top left corner and type the page number (e.g. page 3/3). To "
"move to the previous and next page press the :kbd:`left arrow` and "
":kbd:`right arrow` buttons respectively. There are numerous zoom option, "
"including percentage, page width, and page size in a box a little to the "
"right of the page box. Another way to jump to a particular page is to "
"press :kbd:`control + j` or :menuselection:`Edit --> Jump to page`. To go"
" back to page which you have just come from press :kbd:`control + enter` "
"or :menuselection:`Edit --> Jump backward`. To jump forward a page press "
":kbd:`control + shift + enter` or :menuselection:`Edit --> Jump forward`."
" To move to the last page of the PDF press the :kbd:`End` key or "
":menuselection:`Edit --> Last Page`. To move to the first page of the PDF"
" press the :kbd:`Home` key or :menuselection:`Edit --> First page`."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:28
msgid ""
"To print your PDF press :kbd:`Control + P` or :menuselection:`File --> "
"Print`. To change what printer you use use the :guilabel:`Name` drop down"
" to select the name of the printer. To see more options press the "
":guilabel:`Options >>` button to see more options when you print. To "
"select which pages to print use the :guilabel:`Pages from` button and "
"then the fields for the first page to print and then the last page to "
"print. To change what pages you print and type the page number in use the"
" :guilabel:`Pages` field. To print your current page press the "
":guilabel:`Current Page` button. To change how many copies you print "
"change the :guilabel:`Copies` field."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:33
msgid ""
"If you are printing the PDF in black and white you can however  toggle "
"previewing  the file in black and white by pressing :kbd:`Control + U` or"
" :menuselection:`View --> Convert to grayscale`. To invert the colors of "
"your PDF press :kbd:`Control +I` or :menuselection:`View --> Invert "
"Colors`. To trim the margins off your PDF file press :kbd:`control +Shift"
" +U` or :menuselection:`View --> Trim margins`. If you want to turn off "
"changed colors or trimmed margins off press or use the menu in the same "
"thing again."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:35
msgid ""
"To select text or an image from qpdfview press :kbd:`control+c` or "
":menuselection:`Edit --> Copy to clipboard`. Then the cursor will turn "
"into a crosshair and you will be able to expand a box to select either "
"text or an image and a menu to select copying the text, selecting the "
"text, copying the image, or saving the image to file. Another way to copy"
" text is to press :kbd:`Shift + Left Click`."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:37
msgid ""
"To save your PDF file is to :menuselection:`File --> Save` or you can "
"press :kbd:`Control + s`. You can save the file with a different name "
"with :menuselection:`File --> Save as`. To save a copy of the document "
"click :menuselection:`File --> Save a copy`. If you want to quit qpdfview"
" press :kbd:`Control+Q`."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:39
msgid ""
"qpdfview also includes some very useful docks. To view the outline dock, "
"in the menu select :menuselection:`View --> Docks --> Outline (make sure "
"the button is checked)` or press :kbd:`F6` on the keyboard. It should "
"appear on the left hand side of the PDF with collapsible sections and to "
"expand or collapse each section left click on the :menuselection:`-->`. "
"To go to a particular part of the outline double click on that part of "
"the outline. To see the entire outline right click on the outline and "
"select :menuselection:`Expand all`. To have your outline back to the "
"original state right click on it and select :menuselection:`Collapse "
"all`. This is useful in navigating large PDFs."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:43
msgid ""
"To view properties of your PDF file press :kbd:`F7` or "
":menuselection:`View --> Docks --> Properties`. To see a thumbnail of "
"each page :menuselection:`View --> Dock --> Thumbnails` or press "
":kbd:`F8` to view a thumbnail of each page of the PDF file. If you want "
"to close one of these docks click the X button on the dock to close it. "
"To detach a dock to its own floating window press the diamond button to "
"detach it. To get the dock back to where it was press the diamond button "
"again."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:47
msgid ""
"To view two pages at once like if you want to see a two page spread of an"
" illustration in a PDF of a book press :kbd:`Control + 6` or "
":menuselection:`View --> Two pages`. To get your view back to normal "
"press :kbd:`Control +6` again or :menuselection:`View --> Two pages` "
"again.  To toggle the view of three pages at a time press :kbd:`Control "
"+4` or :menuselection:`View --> Multiple pages`. To view right to left "
"languages on qpdfview press :kbd:`Control +Shift +R` or "
":menuselection:`View --> Right to left`. To view the fonts embedded in "
"the PDF :menuselection:`View --> Fonts`."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:49
msgid ""
"To search through your PDF file you can press :kbd:`control + f` or from "
"the menu :menuselection:`Edit --> Search`. You will get taken to the "
"results and will appear highlighted in yellow to see through the results "
"you can press the down arrow or press :kbd:`F3` to see results farther in"
" the document and press the upward pointed arrow button or press "
":kbd:`Shift +F3` to see results towards the start of the document. To "
"exit the view to search dialog press :kbd:`Escape` or "
":menuselection:`Edit --> Cancel search`. If you want the search to match "
"case check the :guilabel:`Match case` checkbox. To match entire words "
"check the :guilabel:`Whole words` checkbox. To highlight all matches of "
"words check the :guilabel:`Highlight all` checkbox. To exit the search "
"press the button that looks like an octagon."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:53
msgid ""
"To make qpdfview fullscreen you can press :kbd:`f11` or "
":menuselection:`View -->Fullscreen`. To enter presentation mode you can "
"press :kbd:`f12` or :menuselection:`View --> Presentation` which makes "
"the content of the PDF take up the fullscreen and gives you no menubars "
"or toolbars. To exit presentation mode you can press :kbd:`f12` again. To"
" advance to the next page in the presentation press the :kbd:`spacebar` "
"or the :kbd:`right arrow`. To go back a page in presentation press the "
":kbd:`left arrow`. To exit the presentation press :kbd:`escape`. To go to"
" the first page of the presentation press the :kbd:`Home` key. To go to "
"the last page of the presentation press the :kbd:`End` key."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:55
msgid ""
"To make an annotation press :kbd:`Control +A` or :menuselection:`Edit -->"
" Add annotation`. To view the annotation you have made or edit it again "
"press click on what looks like a sticky note with a pin in it. To remove "
"your annotation right click on the annotation and click "
":menuselection:`Remove annotation`. If you just want to highlight "
"something right click on the text and select :menuselection:`Add "
"highlight` text."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:57
msgid ""
"To select page width in zoom in qpdfview is a drop down menu with page "
"width to show the width of the page on qpdfview, :menuselection:`View -->"
" Fit to page width`, or press :kbd:`Control +9`. To view the whole page "
"on qpdfview in this drop down menu select whole page, "
":menuselection:`View --> fit to page size`, or press :kbd:`Control + 8`. "
"To return to the original zoom press :kbd:`Control + 0` or "
":menuselection:`View --> Original size`. To zoom in is press the "
"magnifying glass with a + in it or press :kbd:`Control + +` or "
":menuselection:`View --> Zoom in`. To zoom out press the magnifying glass"
" button with a - in it or press :kbd:`Control + -` or "
":menuselection:`View --> Zoom out`. To rotate the file to the left is "
"press :kbd:`Control + Left arrow` or :menuselection:`View --> Rotate "
"Left`. To rotate the file to the right is press :kbd:`Control + Right "
"arrow` or :menuselection:`View --> Rotate Right`. Another way to rotate "
"is to hold :kbd:`Shift` and then use the mousewheel. Another way to zoom "
"with the scrollwheel is to press :kbd:`Control` and zoom with the "
"mousewheel."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:59
msgid ""
"If you have a particularly long PDF file you might want to make a "
"bookmark to find a specific thing easily. To create a bookmark press "
":kbd:`control +b` or  :menuselection:`Bookmarks -->  Add Bookmark` and "
"give the bookmark a memorable title and description so you can find it in"
" this document again easily. If you later want to remove the bookmark go "
":menuselection:`Bookmarks --> Remove bookmark` or press :kbd:`control+ "
"shift+ B`."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:61
msgid ""
"To jump to the start of a PDF file press the :kbd:`home` key or "
":menuselection:`Edit --> First Page`. To jump to the last page of a PDF "
"file press the :kbd:`end` key or :menuselection:`Edit --> Last Page`. To "
"move to the next page with a keyboard press :kbd:`Spacebar` or press "
":kbd:`Backspace` to move back a page. If you scroll past the end of a "
"page on qpdfview you can change the page."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:64
msgid "Screenshot"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:68
msgid "Customizing"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:69
msgid ""
"To add your own settings to qpdfview you can get to a settings window "
"with :menuselection:`Edit --> Settings`. To change how qpdfview uses "
"links or manages tabs left click on the :guilabel:`Behavior` tab. The "
"checkbox :guilabel:`Open URL` allows you to turn on or off Opening URLs "
"or links within qpdfview. The :guilabel:`Auto-refresh` checkbox reloads "
"the PDF whenever the file changes which is useful for authoring PDF "
"files. To have qpdfview keep track of recently check the :guilabel:`Track"
" recently used` checkbox. To keep track of recently closed documents "
"check the :guilabel:`Keep recently closed` checkbox. To open the tabs you"
" had open last time with qpdfview the next time you open the program "
"check the :guilabel:`Restore tabs` checkbox. To change what screen you "
"use for presentations change the :guilabel:`Presentation Screen` field to"
" the number of the screen you want to use. To change the page in the main"
" view in addition with the presentation check the :guilabel:`Synchronize "
"presentation` checkbox. To have your outline dock follow where you "
"currently are in the PDF check the :guilabel:`Synchronize outline view` "
"checkbox. If you want to scroll once to change an entire page check the "
":guilabel:`Minimal scrolling` checkbox. To change the color of highlights"
" type a hex number for a color or select one from the "
":guilabel:`Highlight Color` drop down menu."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:74
msgid ""
"If you want to reset these settings to the defaults is to press the "
":guilabel:`Defaults` button. If you just want defaults on the current tab"
" you can press the :guilabel:`Defaults on current tab` button. If you "
"want to return to viewing your PDF with the same settings press the "
":guilabel:`OK` button. If you wish to discard your changes press the "
":guilabel:`Cancel` button."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:76
msgid ""
"To deal with settings on graphics press press on the :guilabel:`Graphics`"
" tab. The settings for paper color will has a drop down menu for "
"previewing what it is like printing on colored paper. The checkbox "
":guilabel:`Prefetch` will preload pages not directly viewed by the PDF "
"viewer not directly on the screen however this will use more resources. "
"The drop down for :guilabel:`Cache size` will increase loading speed but "
"will use more resources. The :guilabel:`Prefetch` checkbox loads pages "
"before you view them. The :guilabel:`Prefetch distance` tells you how "
"many pages away from where you are to load. The field for "
":guilabel:`Presentation background color` sets the color of the "
"background for presentations. The :guilabel:`Cache size` increases the "
"size of the cache which will apply more system resources to run heavy "
"PDFs like hundred of pages of full color artwork."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:80
msgid ""
"The :guilabel:`PDF` subtab of the graphics tab has settings for font and "
"paper color for viewing PDF files. To antialias images check the "
":guilabel:`Antialiasing` checkbox. To antialias text check the "
":guilabel:`Text antialiasing` checkbox. To use font hinting to view text "
"easier to view change the :guilabel:`Text hinting` menu to Reduced or "
"full. To not change the background color with change the "
":guilabel:`Ignore paper color` checkbox. To change how qpdfview draws "
"thin lines change the :guilabel:`Thin line mode` drop down menu."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:84
msgid ""
"The :guilabel:`PS` subtab manages how Postscript files appear on the "
"screen. To change how many bits are used for antialiasing graphics change"
" the :guilabel:`Graphics antialias bits` field. To change the number of "
"bits of text antialiasing change :guilabel:`Text antialiasing bits` "
"field."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:88
msgid ""
"To change the interface settings click on the :guilabel:`Interface` tab."
"  If you want the tabs to be spread out press the spread tabs checkbox. "
"The :guilabel:`Tab position` changes where the tabbar on the window. The "
":guilabel:`Tab visibility` menu can be set to as needed, always or never "
"which will show or hide the tabbar. The checkbox for :guilabel:`New tab "
"next to current tab` opens new tabs next to the current one. The field "
"for recently used lets you set the maximum number of files to keep around"
" in recently used. The :guilabel:`Spread tabs` checkbox spreads the tabs "
"to take up the whole tab bar and they get smaller the more tabs you open."
" To have qpdfview close when the last tab in qpdfview is closed check the"
" :guilabel:`Exit after last tab` checkbox. To change the number of "
"recently used PDF files in the menu change the :guilabel:`Recently used "
"count` field. To change how many recently closed tabs of PDFs are shown "
"change the :guilabel:`Recently closed count` field."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:92
msgid ""
"The :guilabel:`Shortcuts` tab provides the ability to customize keyboard "
"shortcuts. The :guilabel:`Action` column is what each keyboard shortcut "
"does. The :guilabel:`Key sequence` column shows the keyboard shortcut. "
"Double click in the key sequence column and type in your desired keyboard"
" shortcut to change the keyboard shortcut."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:96
msgid ""
"The :guilabel:`Modifiers` tab allows you to change settings with the "
"mouse and certain keyboard shortcuts in combination with the mouse. To "
"change what keyboard shortcut to hold down while you hold down your "
"mousewheel to zoom use the :guilabel:`Zoom` drop down menu. To change "
"what keyboard key to hold down before using the mousewheel use the "
":guilabel:`Rotate` key. To change what key to press when you copy text to"
" the clipboard when also pressing a mouse button use the :guilabel:`Copy "
"to Clipboard` drop down menu. To switch which key you press when left "
"clicking to add an annotation use the :guilabel:`Add annotation` drop "
"down menu. To change what what you press to while left clicking to zoom "
"to a selection change the :guilabel:`Zoom to Selection` drop down menu."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:101
msgid "Version"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:102
msgid "Lubuntu ships with version 0.4.18 of qpdfview."
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:105
msgid "How to Launch"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:106
msgid ""
"To launch qpdfview go to the Menu :menuselection:`Office --> qpdfview` or"
" run"
msgstr ""

#: ../../source/2/2.2/2.2.6/qpdfview.rst:112
msgid ""
"from the command line. The icon for qpdfview looks like an eye with a "
"blue background."
msgstr ""

#~ msgid ""
#~ "To open a pdf file use File "
#~ "-> Open from the menu or Ctrl "
#~ "+ O on the keyboard. If you "
#~ "have a pdf open use File -> "
#~ "Open in new tab from the menu, "
#~ "click the Open in new tab button"
#~ " or press Ctrl + T. To refresh"
#~ " a pdf click the Refresh button "
#~ "or press F5 just like most web "
#~ "browsers."
#~ msgstr ""

#~ msgid ""
#~ "If you want to view a particular"
#~ " page select the box (e.g. page "
#~ "1/3) and tpye the page number "
#~ "(e.g. page 3/3). To move to the"
#~ " previous and next page use the "
#~ "left and right arrow buttons "
#~ "respectively. There are numerous zoom "
#~ "option, including percentage, page width, "
#~ "page size, continous, and multiple "
#~ "pages."
#~ msgstr ""

#~ msgid ""
#~ "qpdfview also includes some very useful"
#~ " docks. To view the outline dock, "
#~ "in the menu select View -> Docks"
#~ " -> O utline (make sure the "
#~ "button is checked) or press F6 on"
#~ " the keyboard. It should appear on"
#~ " the left hand side of the pdf"
#~ " with collapsable sections. This is "
#~ "useful in navigating large pdfs."
#~ msgstr ""

#~ msgid ""
#~ "To launch qpdfview go to the Menu"
#~ " -> Office -> qpdfview or run "
#~ "qpdfview from the command line."
#~ msgstr ""

#~ msgid "qpdfview is the default pdf viewer for Lubuntu."
#~ msgstr ""

#~ msgid "tabs"
#~ msgstr ""

#~ msgid "presentation mode"
#~ msgstr ""

#~ msgid "zoom to entire page/ page width"
#~ msgstr ""

#~ msgid "rotating pages"
#~ msgstr ""

#~ msgid "outline, properties, thumbnail, and bookmark docks"
#~ msgstr ""

#~ msgid "printing support"
#~ msgstr ""

#~ msgid "annotation and highlighting"
#~ msgstr ""

#~ msgid "bookmarks"
#~ msgstr ""

#~ msgid "customizable keyboard shortcuts"
#~ msgstr ""

#~ msgid ""
#~ "To open a pdf file use "
#~ ":menuselection:`File --> Open` from the "
#~ "menu or :kbd:`Control + O` on the"
#~ " keyboard. If you have a pdf "
#~ "open use :menuselection:`File --> Open` "
#~ "in new tab from the menu, click"
#~ " the Open in new tab button or"
#~ " press :kbd:`Control + T`. To refresh"
#~ " a pdf click the Refresh button, "
#~ ":menuselection:`File --> Refresh`, or press"
#~ " :kbd:`F5` just like most web "
#~ "browsers. To switch between tabs on "
#~ "the keyboard you can press control "
#~ ":kbd:`control + tab` to go the "
#~ "next tab or :kbd:`control + shift "
#~ "+ tab` to cycle through your tabs"
#~ " in the opposite direction. At the"
#~ " bottom of the tab menu will be"
#~ " a list of all your tabs you"
#~ " have open with the title of "
#~ "each document. To close the tab "
#~ "press the red X button on the "
#~ "tab or press :kbd:`Control +W`. To "
#~ "close all tabs on qpdfview press "
#~ ":kbd:`Control + Shift +W`. To restore"
#~ " the most recently closed tabs press"
#~ " :kbd:`Alt+Shift+W` or :menuselection:`Restore "
#~ "most recently closed tab`."
#~ msgstr ""

#~ msgid ""
#~ "If you want a second copy of "
#~ "a pdf file open right click on "
#~ "the pdf file and :menuselection:`Open "
#~ "Copy in new tab`. If you want "
#~ "a copy of the current pdf open "
#~ "the pdf file and :menuselection:`Open "
#~ "Copy in new window`. To open your"
#~ " file manager in the current "
#~ "directory right click on the tab "
#~ "bar and :menuselection:`Open Containing "
#~ "Folder`. To close all tabs right "
#~ "click on the tab bar and "
#~ ":menuselection:`Close all tabs`. To Close "
#~ "all tabs but that one you right"
#~ " click on right click on a tab"
#~ " and :menuselection:`Close all tabs but "
#~ "this one`. To close all tabs to"
#~ " the right of the one you right"
#~ " click right click on a tab and"
#~ " :menuselection:`Close all tabs to right`."
#~ " To close all tabs to the left"
#~ " right click on a tab and "
#~ ":menuselection:`Close all tabs to left`."
#~ msgstr ""

#~ msgid ""
#~ "If you want to view a particular"
#~ " page select the box (e.g. page "
#~ "1/3) and type the page number "
#~ "(e.g. page 3/3). To move to the"
#~ " previous and next page use the "
#~ "left and right arrow buttons "
#~ "respectively. There are numerous zoom "
#~ "option, including percentage, page width, "
#~ "page size, continous, and multiple "
#~ "pages. Another way to jump to a"
#~ " particular page is to press "
#~ ":kbd:`control + j` or :menuselection:`Edit "
#~ "--> Jump to Page`. To go back "
#~ "to page which you have just come"
#~ " from press :kbd:`control + enter` or"
#~ " :menuselection:`Edit --> Jump backward`. "
#~ "To jump forward a page press "
#~ ":kbd:`control + shift + enter` or "
#~ ":menuselection:`Edit --> Jump Forward`."
#~ msgstr ""

#~ msgid ""
#~ "To print your pdf press :kbd:`Control"
#~ " + P` or :menuselection:`File --> "
#~ "Print`. If you are printing the "
#~ "pdf in black and white you can "
#~ "however  tpggle previewing  the file in"
#~ " black and white by pressing "
#~ ":kbd:`Control + U` or :menuselection:`View "
#~ "--> Convert to grayscale`. To invert "
#~ "the colors of your pdf press "
#~ ":kbd:`Control +I` or :menuselection:`View -->"
#~ " Invert Colors`. To trim the margins"
#~ " off your pdf file press "
#~ ":kbd:`control +Shift +U` or "
#~ ":menuselection:`View --> Trim margins`. If "
#~ "you want to turn any of the "
#~ "alrenetes colors or trimmed margins off"
#~ " press or use the menu in the"
#~ " same thing again."
#~ msgstr ""

#~ msgid ""
#~ "To select text or an image from"
#~ " qpdfview press :kbd:`control+c` or "
#~ ":menuselection:`Edit --> Copy to clipboard`."
#~ " Then the cursor will turn into "
#~ "a crosshair and you will be able"
#~ " to expand a box to slect "
#~ "either text or an image and a "
#~ "menu to select copying the text, "
#~ "selecting the text, copying the image,"
#~ " or saving the image to file. "
#~ "Another way to copy text is to "
#~ "press :kbd:`Control +Left Click`."
#~ msgstr ""

#~ msgid ""
#~ "To save your pdf file is to "
#~ ":menuselection:`File --> Save` or you "
#~ "can press :kbd:`Control + s`. You "
#~ "can save the file with a different"
#~ " name with :menuselection:`File --> SAve"
#~ " as`. To save a copy of the "
#~ "document click :menuselection:`File --> Save"
#~ " a copy`."
#~ msgstr ""

#~ msgid ""
#~ "qpdfview also includes some very useful"
#~ " docks. To view the outline dock, "
#~ "in the menu select :menuselection:`View "
#~ "--> Docks --> Outline (make sure "
#~ "the button is checked)` or press "
#~ ":kbd:`F6` on the keyboard. It should "
#~ "appear on the left hand side of"
#~ " the pdf with collapsable sections. "
#~ "This is useful in navigating large "
#~ "pdfs. To see a thumbnail of each"
#~ " page :menuselection:`View --> Dock --> "
#~ "Thumbnails` or press :kbd:`f8` to view"
#~ " a thumbnial of each page of "
#~ "the pdf file. If you want to "
#~ "close one of these docks click the"
#~ " X button on the dock to close"
#~ " it. To view the fonts embeded "
#~ "in the pdf :menuselection:`View --> "
#~ "Fonts`."
#~ msgstr ""

#~ msgid ""
#~ "To view two pages at once like "
#~ "if you want to see a two "
#~ "page spread of an illustration in "
#~ "a pdf of a book press "
#~ ":kbd:`Control + 6` or :menuselection:`View "
#~ "--> Two pages`. To get your view"
#~ " back to normal press :kbd:`Control "
#~ "+6` agian or :menuselection:`View --> "
#~ "Two pages` again.  To toggle the "
#~ "view of three pages at a time "
#~ "press :kbd:`Control +4` or "
#~ ":menuselection:`View --> Multiple pages`. To"
#~ " view right to left languges on "
#~ "qpdfview press :kbd:`Control +Shift +R` "
#~ "or :menuselection:`View --> Right to "
#~ "left`."
#~ msgstr ""

#~ msgid ""
#~ "To search through your pdf file "
#~ "you can press :kbd:`control + f` "
#~ "or from the menu :menuselection:`edit "
#~ "--> search`. You will get taken to"
#~ " the results and will appear "
#~ "highligheted in yellow to see through"
#~ " the results you can press the "
#~ "down arrow to see results farther "
#~ "in the document and press the "
#~ "upward pointed arrow button to see "
#~ "results towards the start of the "
#~ "document. To exit the view to "
#~ "search dialog press :kbd:`Escape` or "
#~ ":menuselection:`Edit --> Cancel search`."
#~ msgstr ""

#~ msgid ""
#~ "To make qpdfview fullscreen you can "
#~ "press :kbd:`f11` or :menuselection:`View "
#~ "-->Fullscreen` . To enter presentation "
#~ "mode you can press :kbd:`f12` or "
#~ ":menuselection:`View --> Presentation` which "
#~ "makes the content of the pdf take"
#~ " up the fullscreen and gives you "
#~ "no menubars or toolbars. To exit "
#~ "presentation mode you can press "
#~ ":kbd:`f12` again. To advance to the "
#~ "next page in the presentation press "
#~ "the :kbd:`spacebar` or the :kbd:`right "
#~ "arrow`. To go back a page in "
#~ "presentation press the :kbd:`left arrow`. "
#~ "To exit the presentation press "
#~ ":kbd:`escape`."
#~ msgstr ""

#~ msgid ""
#~ "To make an annotation press "
#~ ":kbd:`Control +A` or :menuselection:`Edit -->"
#~ " Add annotation`. To view the "
#~ "annotation you have made or edit "
#~ "it again press click on what looks"
#~ " like a sticky note with a pin"
#~ " in it. To remove your annotation "
#~ "right click on the annotation and "
#~ "click remove annotation. If you just "
#~ "want to highlight something slect add"
#~ " highlight at the context menu right"
#~ " then."
#~ msgstr ""

#~ msgid ""
#~ "To sleect page width in zoom in"
#~ " qpdfview is a drop down menu "
#~ "with page width to show the width"
#~ " of the page on qpdfview, "
#~ ":menuselection:`View --> Page width`, or "
#~ "press :kbd:`Control +9`. To view the "
#~ "whole page on qpdfview in this "
#~ "drop down menu select whole page, "
#~ ":menuselection:`View --> fit to page "
#~ "size`, or press :kbd:`Control + 8. "
#~ "To return to the original zoom "
#~ "press :kbd:`Control + 0` or "
#~ ":menuselection:`View --> Original size`. To"
#~ " zoom in is press the magnifying "
#~ "glass with a + in it or "
#~ "press :kbd:`Control + +` or "
#~ ":menuselection:`View --> Zoom in`. To "
#~ "zoom out press the magnifying glass "
#~ "button with a - in it or "
#~ "press :kbd:`Control + -` or "
#~ ":menuselection:`View --> Zoom out`. To "
#~ "rotate the file to the left is "
#~ "press :kbd:`Control + Left` or "
#~ ":menuselection:`View --> Rotate Left`. To "
#~ "rotate the file to the right is"
#~ " press :kbd:`Control + Rights` or "
#~ ":menuselection:`View --> Rotate Right`.Another "
#~ "way to zoom with the scrollwheel "
#~ "is to press :kbd:`Control` and zoom "
#~ "with the mousewheel."
#~ msgstr ""

#~ msgid ""
#~ "If you have a particularly long "
#~ "pdf file you might want to make"
#~ " a bookmark to find a specific "
#~ "thing easily. To create a bookmark "
#~ "press :kbd:`control +b` or  "
#~ ":menuselection:`Bookmarks -->  Add Bookmark` "
#~ "and give the bookmark a memorable "
#~ "title and description so you can "
#~ "find it in this document again "
#~ "easily. If you later want to "
#~ "remove the bookmark go "
#~ ":menuselection:`bookmarks --> remove bookmark` "
#~ "or press :kbd:`control+ shift+ B`."
#~ msgstr ""

#~ msgid ""
#~ "To jump to the start of a "
#~ "pdf file press the :kbd:`home` key "
#~ "or :menuselection:`Edit --> First Page`. "
#~ "To jump to the last page of "
#~ "a pdf file press the :kbd:`end` "
#~ "key or :menuselection:`Edit --> Last "
#~ "Page`. To move to the next paget"
#~ " with a keyboard press :kbd:`Spacebar` "
#~ "or press :kbd:`Backspace` to move back"
#~ " a page."
#~ msgstr ""

#~ msgid ""
#~ "To add your own settings to "
#~ "qpdfview you can get to a settings"
#~ " window with :menuselection:`Edit --> "
#~ "Settings`. The checkbox for open url "
#~ "allows you to turn on or off "
#~ "Opening URL within within qpdfview. The"
#~ " autorefresh checkbox relaods the pdf "
#~ "whenever the file changes which is "
#~ "useful if you are authoring pdf "
#~ "files. If you want to scroll once"
#~ " to go to an entire page check"
#~ " the :guilabel:`minimal scrolling` checkbox. "
#~ "To change the color of highlights "
#~ "tpye a hex number for a color "
#~ "or select one from the drop down"
#~ " menu by name."
#~ msgstr ""

#~ msgid ""
#~ "If you want to reset these "
#~ "settings to the defaults is to "
#~ "press the :guilabel:`defaults` button. If "
#~ "you just want defaults on the "
#~ "current tab you can press the "
#~ ":guilabel:`defaults on current tab` button."
#~ " If you want to return to "
#~ "viewing your pdf with the same "
#~ "settings press the :guilabel:`OK` button. "
#~ "If you wish to discard your "
#~ "changes press the :guilabel:`cancel` button."
#~ msgstr ""

#~ msgid ""
#~ "To deal with settings on graphics "
#~ "press press on the :guilabel:`graphics` "
#~ "tab. The settings for paper color "
#~ "will has a drop down menu for "
#~ "previewing what it is like printing "
#~ "on colored paper. The checkbox for "
#~ "prefetch will preload pages not directly"
#~ " viewed by the pdf viewer not "
#~ "directly on the screen however this "
#~ "will use more resources. The drop "
#~ "down for cache size will larger "
#~ "will use up more resources but "
#~ "will make loading pdfs much faster. "
#~ "The :guilabel:`Prefetch` checkbox loads pages"
#~ " before you view them. The "
#~ ":guilabel:`Prefetch distance` tells you how"
#~ " many pages away from where you "
#~ "are to load. The field for "
#~ ":guilabel:`Presentation background color` sets "
#~ "the color of the background for "
#~ "presentations. The :guilabel:`Cache size` "
#~ "increases the size of the cache "
#~ "which will apply more system resorouces"
#~ " to run heavy pdfs like hundred "
#~ "of pages of full color artwork."
#~ msgstr ""

#~ msgid ""
#~ "To change the interface settings click"
#~ " on the :guilabel:`interface` tab.  If "
#~ "you want the tabs to be spread "
#~ "out press the spread tabs checkbox. "
#~ "The the :guilabel:`tab position` changes "
#~ "where the tabbar on the window. "
#~ "The tab visibility can be set to"
#~ " as needed, always or never. The "
#~ "checkbox for :guilabel:`new tab next to"
#~ " current tab` opens new tabs next "
#~ "to the current one. The field for"
#~ " recently used lets you set the "
#~ "maximum number of files to keep "
#~ "around in recently used. The "
#~ ":guilabel:`Spread tabs` checkbox spreads the"
#~ " tabs to take up the whole tab"
#~ " bar and they get smaller the "
#~ "more tabs you open."
#~ msgstr ""

#~ msgid ""
#~ "The :guilabel:`Shortcuts` tab provides the "
#~ "abilty to customize keyboard shortcuts. "
#~ "The :guilabel:`Action` column is what is"
#~ " keyboard shortcut does. The :guilabel:`Key"
#~ " seqeunce` column shows the keyboard "
#~ "shorcut. Double click in the key "
#~ "sequence column to change the keyboard"
#~ " shortcut."
#~ msgstr ""

#~ msgid "Lubuntu ships with version 0.4.17 of qpdfview."
#~ msgstr ""

#~ msgid "How to launch"
#~ msgstr ""

#~ msgid "from the command line."
#~ msgstr ""