Upload to Unstable

mk-sbuild installs pkgbinarymangler into the schroot.  Of of the
provided tools in pkgbinarymangler is pkgmaintainermangler.
pkgmaintainermangler is disabled by default, and enabled with
configuration.

A difference between launchpad builds of a synced package and an sbuild
is that the maintainer information will be different.

Enable pkgmaintainermangler to close this difference.

.gitignore

@@ -1,16 +1,2 @@
-/ubuntu_dev_tools.egg-info/
-__pycache__/
-*.pyc
-/build/
-/.pybuild/
-/test-data/example_1.0-1.debian.tar.xz
-/test-data/example_1.0-1.dsc
-/test-data/example_1.0.orig.tar.gz
-/debian/python-ubuntutools/
-/debian/python3-ubuntutools/
-/debian/ubuntu-dev-tools/
-/debian/debhelper-build-stamp
-/debian/files
-/debian/*.debhelper
-/debian/*.debhelper.log
-/debian/*.substvars
+__pycache__
+*.egg-info

.pylintrc

@@ -1,15 +1,19 @@
 [MASTER]
 
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code.
+extension-pkg-allow-list=apt_pkg
+
 # Pickle collected data for later comparisons.
 persistent=no
 
+# Use all cpus, to speed up testing
+jobs=0
+
 
 [MESSAGES CONTROL]
 
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
-confidence=HIGH
-
 # Disable the message, report, category or checker with the given id(s). You
 # can either give multiple identifiers separated by comma (,) or put this
 # option multiple times (only on the command line, not in the configuration
@@ -19,7 +23,18 @@ confidence=HIGH
 # --enable=similarities". If you want to run only the classes checker, but have
 # no Warning level messages displayed, use"--disable=all --enable=classes
 # --disable=W"
-disable=locally-disabled
+disable=fixme,locally-disabled,missing-docstring,useless-option-value,
+  # TODO: Fix all following disabled checks!
+  invalid-name,
+  consider-using-with,
+  too-many-arguments,
+  too-many-branches,
+  too-many-statements,
+  too-many-locals,
+  duplicate-code,
+  too-many-instance-attributes,
+  too-many-nested-blocks,
+  too-many-lines,
 
 
 [REPORTS]
@@ -28,14 +43,6 @@ disable=locally-disabled
 reports=no
 
 
-[TYPECHECK]
-
-# List of classes names for which member attributes should not be checked
-# (useful for classes with attributes dynamically set).
-# lpapicache classes, urlparse
-ignored-classes=Launchpad,BaseWrapper,PersonTeam,Distribution,Consumer,Credentials,ParseResult,apt_pkg,apt_pkg.Dependency,apt_pkg.BaseDependency
-
-
 [FORMAT]
 
 # Maximum number of characters on a single line.
@@ -49,4 +56,10 @@ indent-string='    '
 [BASIC]
 
 # Allow variables called e, f, lp
-good-names=i,j,k,ex,Run,_,e,f,lp
+good-names=i,j,k,ex,Run,_,e,f,lp,me,to
+
+
+[IMPORTS]
+
+# Force import order to recognize a module as part of a third party library.
+known-third-party=debian

backportpackage

@@ -18,205 +18,232 @@
 #
 # ##################################################################
 
+import argparse
 import glob
-import optparse
 import os
 import shutil
 import subprocess
 import sys
 import tempfile
+from urllib.parse import quote
 
-import lsb_release
+try:
+    import lsb_release
+except ImportError:
+    lsb_release = None
+from distro_info import DebianDistroInfo, UbuntuDistroInfo
 from httplib2 import Http, HttpLib2Error
 
-from ubuntutools.archive import (SourcePackage, DebianSourcePackage,
-                                 UbuntuSourcePackage, DownloadError)
-from ubuntutools.config import UDTConfig, ubu_email
+from ubuntutools import getLogger
+from ubuntutools.archive import DebianSourcePackage, DownloadError, UbuntuSourcePackage
 from ubuntutools.builder import get_builder
-from ubuntutools.lp.lpapicache import (Launchpad, Distribution,
-                                       SeriesNotFoundException,
-                                       PackageNotFoundException)
-from ubuntutools.logger import Logger
-from ubuntutools.misc import (system_distribution, vendor_to_distroinfo,
-                              codename_to_distribution)
+from ubuntutools.config import UDTConfig, ubu_email
+from ubuntutools.lp.lpapicache import (
+    Distribution,
+    Launchpad,
+    PackageNotFoundException,
+    SeriesNotFoundException,
+)
+from ubuntutools.misc import codename_to_distribution, system_distribution, vendor_to_distroinfo
 from ubuntutools.question import YesNoQuestion
 
+Logger = getLogger()
 
-def error(msg):
-    Logger.error(msg)
+
+def error(msg, *args):
+    Logger.error(msg, *args)
     sys.exit(1)
 
 
 def check_call(cmd, *args, **kwargs):
-    Logger.command(cmd)
+    Logger.debug(" ".join(cmd))
     ret = subprocess.call(cmd, *args, **kwargs)
     if ret != 0:
-        error('%s returned %d.' % (cmd[0], ret))
+        error("%s returned %d.", cmd[0], ret)
 
 
-def check_program_exists(name, package=None):
-    paths = set(os.environ['PATH'].split(':'))
-    paths |= set(('/sbin', '/usr/sbin', '/usr/local/sbin'))
-    if not any(os.path.exists(os.path.join(p, name)) for p in paths):
-        Logger.error('Could not find "%s". Please install the package "%s" '
-                     'to use this functionality.',
-                     name, package or name)
-        sys.exit(1)
+def parse(argv):
+    usage = "%(prog)s [options] <source package name or .dsc URL/file>"
+    parser = argparse.ArgumentParser(usage=usage)
+    parser.add_argument(
+        "-d",
+        "--destination",
+        metavar="DEST",
+        dest="dest_releases",
+        default=[],
+        action="append",
+        help="Backport to DEST release (default: current release)",
+    )
+    parser.add_argument(
+        "-s",
+        "--source",
+        metavar="SOURCE",
+        dest="source_release",
+        help="Backport from SOURCE release (default: devel release)",
+    )
+    parser.add_argument(
+        "-S",
+        "--suffix",
+        metavar="SUFFIX",
+        help="Suffix to append to version number (default: ~ppa1 when uploading to a PPA)",
+    )
+    parser.add_argument(
+        "-e",
+        "--message",
+        metavar="MESSAGE",
+        default="No-change",
+        help='Changelog message to use instead of "No-change" '
+        "(default: No-change backport to DEST.)",
+    )
+    parser.add_argument(
+        "-b",
+        "--build",
+        default=False,
+        action="store_true",
+        help="Build the package before uploading (default: %(default)s)",
+    )
+    parser.add_argument(
+        "-B",
+        "--builder",
+        metavar="BUILDER",
+        help="Specify the package builder (default: pbuilder)",
+    )
+    parser.add_argument(
+        "-U",
+        "--update",
+        default=False,
+        action="store_true",
+        help="Update the build environment before attempting to build",
+    )
+    parser.add_argument("-u", "--upload", metavar="UPLOAD", help="Specify an upload destination")
+    parser.add_argument(
+        "-k", "--key", dest="keyid", help="Specify the key ID to be used for signing."
+    )
+    parser.add_argument(
+        "--dont-sign", dest="keyid", action="store_false", help="Do not sign the upload."
+    )
+    parser.add_argument(
+        "-y",
+        "--yes",
+        dest="prompt",
+        default=True,
+        action="store_false",
+        help="Do not prompt before uploading to a PPA",
+    )
+    parser.add_argument(
+        "-v", "--version", metavar="VERSION", help="Package version to backport (or verify)"
+    )
+    parser.add_argument(
+        "-w",
+        "--workdir",
+        metavar="WORKDIR",
+        help="Specify a working directory (default: temporary dir)",
+    )
+    parser.add_argument(
+        "-r",
+        "--release-pocket",
+        default=False,
+        action="store_true",
+        help="Target the release pocket in the .changes file. "
+        "Necessary (and default) for uploads to PPAs",
+    )
+    parser.add_argument(
+        "-c", "--close", metavar="BUG", help="Bug to close in the changelog entry."
+    )
+    parser.add_argument(
+        "-m", "--mirror", metavar="URL", help="Preferred mirror (default: Launchpad)"
+    )
+    parser.add_argument(
+        "-l",
+        "--lpinstance",
+        metavar="INSTANCE",
+        help="Launchpad instance to connect to (default: production)",
+    )
+    parser.add_argument(
+        "--no-conf",
+        default=False,
+        action="store_true",
+        help="Don't read config files or environment variables",
+    )
+    parser.add_argument("package_or_dsc", help=argparse.SUPPRESS)
+
+    args = parser.parse_args(argv)
+    config = UDTConfig(args.no_conf)
+    if args.builder is None:
+        args.builder = config.get_value("BUILDER")
+    if not args.update:
+        args.update = config.get_value("UPDATE_BUILDER", boolean=True)
+    if args.workdir is None:
+        args.workdir = config.get_value("WORKDIR")
+    if args.lpinstance is None:
+        args.lpinstance = config.get_value("LPINSTANCE")
+    if args.upload is None:
+        args.upload = config.get_value("UPLOAD")
+    if args.keyid is None:
+        args.keyid = config.get_value("KEYID")
+    if not args.upload and not args.workdir:
+        parser.error("Please specify either a working dir or an upload target!")
+    if args.upload and args.upload.startswith("ppa:"):
+        args.release_pocket = True
+
+    return args, config
 
 
-def parse(args):
-    usage = 'Usage: %prog [options] <source package name or .dsc URL/file>'
-    parser = optparse.OptionParser(usage)
-    parser.add_option('-d', '--destination',
-                      metavar='DEST',
-                      dest='dest_releases',
-                      default=[],
-                      action='append',
-                      help='Backport to DEST release '
-                           '(default: current release)')
-    parser.add_option('-s', '--source',
-                      metavar='SOURCE',
-                      dest='source_release',
-                      help='Backport from SOURCE release '
-                           '(default: devel release)')
-    parser.add_option('-S', '--suffix',
-                      metavar='SUFFIX',
-                      help='Suffix to append to version number '
-                           '(default: ~ppa1 when uploading to a PPA)')
-    parser.add_option('-b', '--build',
-                      default=False,
-                      action='store_true',
-                      help='Build the package before uploading '
-                           '(default: %default)')
-    parser.add_option('-B', '--builder',
-                      metavar='BUILDER',
-                      help='Specify the package builder (default: pbuilder)')
-    parser.add_option('-U', '--update',
-                      default=False,
-                      action='store_true',
-                      help='Update the build environment before '
-                           'attempting to build')
-    parser.add_option('-u', '--upload',
-                      metavar='UPLOAD',
-                      help='Specify an upload destination')
-    parser.add_option("-k", "--key",
-                      dest='keyid',
-                      help="Specify the key ID to be used for signing.")
-    parser.add_option('--dont-sign',
-                      dest='keyid', action='store_false',
-                      help='Do not sign the upload.')
-    parser.add_option('-y', '--yes',
-                      dest='prompt',
-                      default=True,
-                      action='store_false',
-                      help='Do not prompt before uploading to a PPA')
-    parser.add_option('-v', '--version',
-                      metavar='VERSION',
-                      help='Package version to backport (or verify)')
-    parser.add_option('-w', '--workdir',
-                      metavar='WORKDIR',
-                      help='Specify a working directory '
-                           '(default: temporary dir)')
-    parser.add_option('-r', '--release-pocket',
-                      default=False,
-                      action='store_true',
-                      help='Target the release pocket in the .changes file. '
-                           'Necessary (and default) for uploads to PPAs')
-    parser.add_option('-c', '--close',
-                      metavar='BUG',
-                      help='Bug to close in the changelog entry.')
-    parser.add_option('-m', '--mirror',
-                      metavar='URL',
-                      help='Preferred mirror (default: Launchpad)')
-    parser.add_option('-l', '--lpinstance',
-                      metavar='INSTANCE',
-                      help='Launchpad instance to connect to '
-                           '(default: production)')
-    parser.add_option('--no-conf',
-                      default=False,
-                      action='store_true',
-                      help="Don't read config files or environment variables")
-
-    opts, args = parser.parse_args(args)
-    if len(args) != 1:
-        parser.error('You must specify a single source package or a .dsc '
-                     'URL/path.')
-    config = UDTConfig(opts.no_conf)
-    if opts.builder is None:
-        opts.builder = config.get_value('BUILDER')
-    if not opts.update:
-        opts.update = config.get_value('UPDATE_BUILDER', boolean=True)
-    if opts.workdir is None:
-        opts.workdir = config.get_value('WORKDIR')
-    if opts.lpinstance is None:
-        opts.lpinstance = config.get_value('LPINSTANCE')
-    if opts.upload is None:
-        opts.upload = config.get_value('UPLOAD')
-    if opts.keyid is None:
-        opts.keyid = config.get_value('KEYID')
-    if not opts.upload and not opts.workdir:
-        parser.error('Please specify either a working dir or an upload target!')
-    if opts.upload and opts.upload.startswith('ppa:'):
-        opts.release_pocket = True
-    if opts.upload:
-        check_program_exists('dput')
-
-    return opts, args, config
-
-
-def find_release_package(mirror, workdir, package, version, source_release,
-                         config):
+def find_release_package(mirror, workdir, package, version, source_release, config):
     srcpkg = None
 
     if source_release:
         distribution = codename_to_distribution(source_release)
         if not distribution:
-            error('Unknown release codename %s' % source_release)
+            error("Unknown release codename %s", source_release)
         info = vendor_to_distroinfo(distribution)()
         source_release = info.codename(source_release, default=source_release)
     else:
         distribution = system_distribution()
     mirrors = [mirror] if mirror else []
 
-    mirrors.append(config.get_value('%s_MIRROR' % distribution.upper()))
+    mirrors.append(config.get_value(f"{distribution.upper()}_MIRROR"))
 
     if not version:
         archive = Distribution(distribution.lower()).getArchive()
         try:
             spph = archive.getSourcePackage(package, source_release)
         except (SeriesNotFoundException, PackageNotFoundException) as e:
-            error(str(e))
+            error("%s", str(e))
         version = spph.getVersion()
 
-    if distribution == 'Debian':
-        srcpkg = DebianSourcePackage(package,
-                                     version,
-                                     workdir=workdir,
-                                     mirrors=mirrors)
-    elif distribution == 'Ubuntu':
-        srcpkg = UbuntuSourcePackage(package,
-                                     version,
-                                     workdir=workdir,
-                                     mirrors=mirrors)
+    if distribution == "Debian":
+        srcpkg = DebianSourcePackage(package, version, workdir=workdir, mirrors=mirrors)
+    elif distribution == "Ubuntu":
+        srcpkg = UbuntuSourcePackage(package, version, workdir=workdir, mirrors=mirrors)
 
     return srcpkg
 
 
 def find_package(mirror, workdir, package, version, source_release, config):
     "Returns the SourcePackage"
-    if package.endswith('.dsc'):
-        return SourcePackage(version=version, dscfile=package,
-                             workdir=workdir, mirrors=(mirror,))
+    if package.endswith(".dsc"):
+        # Here we are using UbuntuSourcePackage just because we don't have any
+        # "general" class that is safely instantiable (as SourcePackage is an
+        # abstract class).  None of the distribution-specific details within
+        # UbuntuSourcePackage is relevant for this use case.
+        return UbuntuSourcePackage(
+            version=version, dscfile=package, workdir=workdir, mirrors=(mirror,)
+        )
 
     if not source_release and not version:
         info = vendor_to_distroinfo(system_distribution())
         source_release = info().devel()
 
-    srcpkg = find_release_package(mirror, workdir, package, version,
-                                  source_release, config)
+    srcpkg = find_release_package(mirror, workdir, package, version, source_release, config)
     if version and srcpkg.version != version:
-        error('Requested backport of version %s but version of %s in %s is %s'
-              % (version, package, source_release, srcpkg.version))
+        error(
+            "Requested backport of version %s but version of %s in %s is %s",
+            version,
+            package,
+            source_release,
+            srcpkg.version,
+        )
 
     return srcpkg
 
@@ -224,15 +251,27 @@ def find_package(mirror, workdir, package, version, source_release, config):
 def get_backport_version(version, suffix, upload, release):
     distribution = codename_to_distribution(release)
     if not distribution:
-        error('Unknown release codename %s' % release)
-    series = Distribution(distribution.lower()).\
-        getSeries(name_or_version=release)
+        error("Unknown release codename %s", release)
+    if distribution == "Debian":
+        debian_distro_info = DebianDistroInfo()
+        debian_codenames = debian_distro_info.supported()
+        if release in debian_codenames:
+            release_version = debian_distro_info.version(release)
+            if not release_version:
+                error("Can't find the release version for %s", release)
+            backport_version = f"{version}~bpo{release_version}+1"
+        else:
+            error("%s is not a supported release (%s)", release, debian_codenames)
+    elif distribution == "Ubuntu":
+        series = Distribution(distribution.lower()).getSeries(name_or_version=release)
 
-    backport_version = version + ('~%s%s.1' % (distribution.lower(), series.version))
+        backport_version = f"{version}~bpo{series.version}.1"
+    else:
+        error("Unknown distribution «%s» for release «%s»", distribution, release)
     if suffix is not None:
         backport_version += suffix
-    elif upload and upload.startswith('ppa:'):
-        backport_version += '~ppa1'
+    elif upload and upload.startswith("ppa:"):
+        backport_version += "~ppa1"
     return backport_version
 
 
@@ -240,26 +279,25 @@ def get_old_version(source, release):
     try:
         distribution = codename_to_distribution(release)
         archive = Distribution(distribution.lower()).getArchive()
-        pkg = archive.getSourcePackage(source,
-                                       release,
-                                       ('Release', 'Security', 'Updates',
-                                        'Proposed', 'Backports'))
+        pkg = archive.getSourcePackage(
+            source, release, ("Release", "Security", "Updates", "Proposed", "Backports")
+        )
         return pkg.getVersion()
     except (SeriesNotFoundException, PackageNotFoundException):
         pass
+    return None
 
 
 def get_backport_dist(release, release_pocket):
     if release_pocket:
         return release
-    else:
-        return '%s-backports' % release
+    return f"{release}-backports"
 
 
 def do_build(workdir, dsc, release, builder, update):
     builder = get_builder(builder)
     if not builder:
-        return
+        return None
 
     if update:
         if 0 != builder.update(release):
@@ -267,101 +305,121 @@ def do_build(workdir, dsc, release, builder, update):
 
     # builder.build is going to chdir to buildresult:
     workdir = os.path.realpath(workdir)
-    return builder.build(os.path.join(workdir, dsc),
-                         release,
-                         os.path.join(workdir, "buildresult"))
+    return builder.build(os.path.join(workdir, dsc), release, os.path.join(workdir, "buildresult"))
 
 
 def do_upload(workdir, package, bp_version, changes, upload, prompt):
-    print('Please check %s %s in file://%s carefully!' % (package, bp_version, workdir))
-    if prompt or upload == 'ubuntu':
-        question = 'Do you want to upload the package to %s' % upload
+    print(f"Please check {package} {bp_version} in file://{workdir} carefully!")
+    if prompt or upload == "ubuntu":
+        question = f"Do you want to upload the package to {upload}"
         answer = YesNoQuestion().ask(question, "yes")
         if answer == "no":
             return
 
-    check_call(['dput', upload, changes], cwd=workdir)
+    check_call(["dput", upload, changes], cwd=workdir)
 
 
 def orig_needed(upload, workdir, pkg):
-    '''Avoid a -sa if possible'''
-    if not upload or not upload.startswith('ppa:'):
+    """Avoid a -sa if possible"""
+    if not upload or not upload.startswith("ppa:"):
         return True
-    ppa = upload.split(':', 1)[1]
-    user, ppa = ppa.split('/', 1)
+    ppa = upload.split(":", 1)[1]
+    user, ppa = ppa.split("/", 1)
 
     version = pkg.version.upstream_version
 
-    h = Http()
-    for filename in glob.glob(os.path.join(workdir, '%s_%s.orig*' % (pkg.source, version))):
-        url = ('https://launchpad.net/~%s/+archive/%s/+files/%s'
-               % (user, ppa, filename))
+    http = Http()
+    for filename in glob.glob(os.path.join(workdir, f"{pkg.source}_{version}.orig*")):
+        url = (
+            f"https://launchpad.net/~{quote(user)}/+archive/{quote(ppa)}/+sourcefiles"
+            f"/{quote(pkg.source)}/{quote(pkg.version.full_version)}"
+            f"/{quote(os.path.basename(filename))}"
+        )
         try:
-            headers, body = h.request(url, 'HEAD')
-            if (headers.status != 200 or
-                    not headers['content-location'].startswith('https://launchpadlibrarian.net')):
+            headers = http.request(url, "HEAD")[0]
+            if headers.status != 200 or not headers["content-location"].startswith(
+                "https://launchpadlibrarian.net"
+            ):
                 return True
         except HttpLib2Error as e:
-            Logger.info(e)
+            Logger.debug(e)
             return True
     return False
 
 
-def do_backport(workdir, pkg, suffix, close, release, release_pocket, build,
-                builder, update, upload, keyid, prompt):
-    dirname = '%s-%s' % (pkg.source, release)
+def do_backport(
+    workdir,
+    pkg,
+    suffix,
+    message,
+    close,
+    release,
+    release_pocket,
+    build,
+    builder,
+    update,
+    upload,
+    keyid,
+    prompt,
+):
+    dirname = f"{pkg.source}-{release}"
     srcdir = os.path.join(workdir, dirname)
 
     if os.path.exists(srcdir):
-        question = 'Working directory %s already exists. Delete it?' % srcdir
-        if YesNoQuestion().ask(question, 'no') == 'no':
+        question = f"Working directory {srcdir} already exists. Delete it?"
+        if YesNoQuestion().ask(question, "no") == "no":
             sys.exit(1)
         shutil.rmtree(srcdir)
 
     pkg.unpack(dirname)
 
-    bp_version = get_backport_version(pkg.version.full_version, suffix,
-                                      upload, release)
+    bp_version = get_backport_version(pkg.version.full_version, suffix, upload, release)
     old_version = get_old_version(pkg.source, release)
     bp_dist = get_backport_dist(release, release_pocket)
 
-    changelog = 'No-change backport to %s' % (release,)
+    changelog = f"{message} backport to {release}."
     if close:
-        changelog += ' (LP: #%s)' % (close,)
-    check_call(['dch',
-                '--force-bad-version',
-                '--force-distribution',
-                '--preserve',
-                '--newversion', bp_version,
-                '--distribution', bp_dist,
-                changelog],
-               cwd=srcdir)
+        changelog += f" (LP: #{close})"
+    check_call(
+        [
+            "dch",
+            "--force-bad-version",
+            "--force-distribution",
+            "--preserve",
+            "--newversion",
+            bp_version,
+            "--distribution",
+            bp_dist,
+            changelog,
+        ],
+        cwd=srcdir,
+    )
 
-    cmd = ['debuild', '--no-lintian', '-S', '-nc', '-uc', '-us']
+    cmd = ["debuild", "--no-lintian", "-S", "-nc", "-uc", "-us"]
     if orig_needed(upload, workdir, pkg):
-        cmd.append('-sa')
+        cmd.append("-sa")
     else:
-        cmd.append('-sd')
+        cmd.append("-sd")
     if old_version:
-        cmd.append('-v%s' % old_version)
+        cmd.append(f"-v{old_version}")
     env = os.environ.copy()
     # An ubuntu.com e-mail address would make dpkg-buildpackage fail if there
     # wasn't an Ubuntu maintainer for an ubuntu-versioned package. LP: #1007042
-    env.pop('DEBEMAIL', None)
+    env.pop("DEBEMAIL", None)
     check_call(cmd, cwd=srcdir, env=env)
 
-    fn_base = pkg.source + '_' + bp_version.split(':', 1)[-1]
-    changes = fn_base + '_source.changes'
+    fn_base = pkg.source + "_" + bp_version.split(":", 1)[-1]
+    changes = fn_base + "_source.changes"
 
     if build:
-        if 0 != do_build(workdir, fn_base + '.dsc', release, builder, update):
+        if 0 != do_build(workdir, fn_base + ".dsc", release, builder, update):
             sys.exit(1)
 
     # None: sign with the default signature. False: don't sign
     if keyid is not False:
-        cmd = ['debsign']
+        cmd = ["debsign"]
         if keyid:
-            cmd.append('-k' + keyid)
+            cmd.append("-k" + keyid)
         cmd.append(changes)
         check_call(cmd, cwd=workdir)
     if upload:
@@ -370,56 +428,68 @@ def do_backport(workdir, pkg, suffix, close, release, release_pocket, build,
     shutil.rmtree(srcdir)
 
 
-def main(args):
+def main(argv):
     ubu_email()
 
-    opts, (package_or_dsc,), config = parse(args[1:])
+    args, config = parse(argv[1:])
 
-    Launchpad.login_anonymously(service=opts.lpinstance)
+    Launchpad.login_anonymously(service=args.lpinstance)
 
-    if not opts.dest_releases:
-        distinfo = lsb_release.get_distro_information()
-        try:
-            opts.dest_releases = [distinfo['CODENAME']]
-        except KeyError:
-            error('No destination release specified and unable to guess yours.')
+    if not args.dest_releases:
+        if lsb_release:
+            distinfo = lsb_release.get_distro_information()
+            try:
+                current_distro = distinfo["ID"]
+            except KeyError:
+                error("No destination release specified and unable to guess yours.")
+        else:
+            err, current_distro = subprocess.getstatusoutput("lsb_release --id --short")
+            if err:
+                error("Could not run lsb_release to retrieve distribution")
 
-    if opts.workdir:
-        workdir = os.path.expanduser(opts.workdir)
+        if current_distro == "Ubuntu":
+            args.dest_releases = [UbuntuDistroInfo().lts()]
+        elif current_distro == "Debian":
+            args.dest_releases = [DebianDistroInfo().stable()]
+        else:
+            error("Unknown distribution %s, can't guess target release", current_distro)
+
+    if args.workdir:
+        workdir = os.path.expanduser(args.workdir)
     else:
-        workdir = tempfile.mkdtemp(prefix='backportpackage-')
+        workdir = tempfile.mkdtemp(prefix="backportpackage-")
 
     if not os.path.exists(workdir):
         os.makedirs(workdir)
 
     try:
-        pkg = find_package(opts.mirror,
-                           workdir,
-                           package_or_dsc,
-                           opts.version,
-                           opts.source_release,
-                           config)
+        pkg = find_package(
+            args.mirror, workdir, args.package_or_dsc, args.version, args.source_release, config
+        )
         pkg.pull()
 
-        for release in opts.dest_releases:
-            do_backport(workdir,
-                        pkg,
-                        opts.suffix,
-                        opts.close,
-                        release,
-                        opts.release_pocket,
-                        opts.build,
-                        opts.builder,
-                        opts.update,
-                        opts.upload,
-                        opts.keyid,
-                        opts.prompt)
+        for release in args.dest_releases:
+            do_backport(
+                workdir,
+                pkg,
+                args.suffix,
+                args.message,
+                args.close,
+                release,
+                args.release_pocket,
+                args.build,
+                args.builder,
+                args.update,
+                args.upload,
+                args.keyid,
+                args.prompt,
+            )
     except DownloadError as e:
-        error(str(e))
+        error("%s", str(e))
     finally:
-        if not opts.workdir:
+        if not args.workdir:
             shutil.rmtree(workdir)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     sys.exit(main(sys.argv))

bash_completion/pbuilder-dist

@@ -36,7 +36,7 @@ _pbuilder-dist()
     for distro in $(ubuntu-distro-info --all; debian-distro-info --all) stable testing unstable; do
         for builder in pbuilder cowbuilder; do
             echo "$builder-$distro"
-            for arch in i386 amd64 armel armhf; do
+            for arch in i386 amd64 armhf; do
                 echo "$builder-$distro-$arch"
             done
         done

bitesize

@@ -1,93 +0,0 @@
-#!/usr/bin/python3
-"""Add 'bitesize' tag to bugs and add a comment."""
-
-# Copyright (c) 2011 Canonical Ltd.
-#
-# bitesize is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 3, or (at your option) any
-# later version.
-#
-# bitesize is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with bitesize; see the file COPYING.  If not, write to the Free
-# Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# Authors:
-#  Daniel Holbach <daniel.holbach@canonical.com>
-
-import sys
-from optparse import OptionParser
-
-from launchpadlib.launchpad import Launchpad
-from launchpadlib.errors import HTTPError
-
-from ubuntutools.config import UDTConfig
-from ubuntutools.logger import Logger
-
-
-def error_out(msg):
-    Logger.error(msg)
-    sys.exit(1)
-
-
-def save_entry(entry):
-    try:
-        entry.lp_save()
-    except HTTPError as error:
-        error_out(error.content)
-
-
-def tag_bug(bug):
-    bug.tags = bug.tags + ['bitesize']  # LP: #254901 workaround
-    save_entry(bug)
-
-
-def main():
-    usage = "Usage: %prog <bug number>"
-    opt_parser = OptionParser(usage)
-    opt_parser.add_option("-l", "--lpinstance", metavar="INSTANCE",
-                          help="Launchpad instance to connect to "
-                               "(default: production)",
-                          dest="lpinstance", default=None)
-    opt_parser.add_option("--no-conf",
-                          help="Don't read config files or "
-                               "environment variables.",
-                          dest="no_conf", default=False, action="store_true")
-    (options, args) = opt_parser.parse_args()
-    config = UDTConfig(options.no_conf)
-    if options.lpinstance is None:
-        options.lpinstance = config.get_value("LPINSTANCE")
-    if len(args) < 1:
-        opt_parser.error("Need at least one bug number.")
-
-    launchpad = Launchpad.login_with("ubuntu-dev-tools", options.lpinstance)
-    if launchpad is None:
-        error_out("Couldn't authenticate to Launchpad.")
-
-    # check that the new main bug isn't a duplicate
-    try:
-        bug = launchpad.bugs[args[0]]
-    except HTTPError as error:
-        if error.response.status == 401:
-            error_out("Don't have enough permissions to access bug %s. %s" %
-                      (args[0], error.content))
-        else:
-            raise
-    if 'bitesize' in bug.tags:
-        error_out("Bug is already marked as 'bitesize'.")
-    bug.newMessage(content="I'm marking this bug as 'bitesize' as it looks "
-                           "like an issue that is easy to fix and suitable "
-                           "for newcomers in Ubuntu development. If you need "
-                           "any help with fixing it, talk to me about it.")
-    bug.subscribe(person=launchpad.me)
-    tag_bug(launchpad.bugs[bug.id])  # fresh bug object, LP: #336866 workaround
-
-
-if __name__ == '__main__':
-    main()

check-mir

@@ -21,69 +21,116 @@
 # this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 
-import sys
-import optparse
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+"""Check if any of a package's build or binary dependencies are in universe or multiverse.
+
+Run this inside an unpacked source package
+"""
+
+import argparse
 import os.path
+import sys
 
 import apt
 
 
 def check_support(apt_cache, pkgname, alt=False):
-    '''Check if pkgname is in main or restricted.
+    """Check if pkgname is in main or restricted.
 
     This prints messages if a package is not in main/restricted, or only
     partially (i. e. source in main, but binary in universe).
-    '''
+    """
     if alt:
-        prefix = '  ... alternative ' + pkgname
+        prefix = "  ... alternative " + pkgname
     else:
-        prefix = ' * ' + pkgname
+        prefix = " * " + pkgname
 
-    try:
+    prov_packages = apt_cache.get_providing_packages(pkgname)
+    if pkgname in apt_cache:
         pkg = apt_cache[pkgname]
-    except KeyError:
-        print(prefix, 'does not exist (pure virtual?)', file=sys.stderr)
+
+    # If this is a virtual package, iterate through the binary packages that
+    # provide this, and ensure they are all in Main. Source packages in and of
+    # themselves cannot provide virtual packages, only binary packages can.
+    elif len(prov_packages) > 0:
+        supported, unsupported = [], []
+        for pkg in prov_packages:
+            candidate = pkg.candidate
+            if candidate:
+                section = candidate.section
+                if section.startswith("universe") or section.startswith("multiverse"):
+                    unsupported.append(pkg.name)
+                else:
+                    supported.append(pkg.name)
+
+        if len(supported) > 0:
+            msg = "is a virtual package, which is provided by the following "
+            msg += "candidates in Main: " + " ".join(supported)
+            print(prefix, msg)
+        elif len(unsupported) > 0:
+            msg = "is a virtual package, but is only provided by the "
+            msg += "following non-Main candidates: " + " ".join(unsupported)
+            print(prefix, msg, file=sys.stderr)
+            return False
+        else:
+            msg = "is a virtual package that exists but is not provided by "
+            msg += "package currently in the archive. Proceed with caution."
+            print(prefix, msg, file=sys.stderr)
+            return False
+
+    else:
+        print(prefix, "does not exist", file=sys.stderr)
         return False
 
     section = pkg.candidate.section
-    if section.startswith('universe') or section.startswith('multiverse'):
+    if section.startswith("universe") or section.startswith("multiverse"):
         # check if the source package is in main and thus will only need binary
         # promotion
         source_records = apt.apt_pkg.SourceRecords()
         if not source_records.lookup(pkg.candidate.source_name):
-            print('ERROR: Cannot lookup source package for', pkg.name,
-                  file=sys.stderr)
-            print(prefix, 'package is in', section.split('/')[0])
+            print("ERROR: Cannot lookup source package for", pkg.name, file=sys.stderr)
+            print(prefix, "package is in", section.split("/")[0])
             return False
         src = apt.apt_pkg.TagSection(source_records.record)
-        if (src['Section'].startswith('universe') or
-                src['Section'].startswith('multiverse')):
-            print(prefix, 'binary and source package is in',
-                  section.split('/')[0])
+        if src["Section"].startswith("universe") or src["Section"].startswith("multiverse"):
+            print(prefix, "binary and source package is in", section.split("/")[0])
             return False
-        else:
-            print(prefix, 'is in', section.split('/')[0] + ', but its source',
-                  pkg.candidate.source_name,
-                  'is already in main; file an ubuntu-archive bug for '
-                  'promoting the current preferred alternative')
-            return True
+
+        print(
+            prefix,
+            "is in",
+            section.split("/")[0] + ", but its source",
+            pkg.candidate.source_name,
+            "is already in main; file an ubuntu-archive bug for "
+            "promoting the current preferred alternative",
+        )
+        return True
 
     if alt:
-        print(prefix, 'is already in main; consider preferring it')
+        print(prefix, "is already in main; consider preferring it")
 
     return True
 
 
 def check_build_dependencies(apt_cache, control):
-    print('Checking support status of build dependencies...')
+    print("Checking support status of build dependencies...")
 
     any_unsupported = False
 
-    for field in ('Build-Depends', 'Build-Depends-Indep'):
+    for field in ("Build-Depends", "Build-Depends-Indep"):
         if field not in control.section:
             continue
         for or_group in apt.apt_pkg.parse_src_depends(control.section[field]):
             pkgname = or_group[0][0]
+
+            # debhelper-compat is expected to be a build dependency of every
+            # package, so it is a red herring to display it in this report.
+            # (src:debhelper is in Ubuntu Main anyway)
+            if pkgname == "debhelper-compat":
+                continue
+
             if not check_support(apt_cache, pkgname):
                 # check non-preferred alternatives
                 for altpkg in or_group[1:]:
@@ -98,20 +145,19 @@ def check_build_dependencies(apt_cache, control):
 def check_binary_dependencies(apt_cache, control):
     any_unsupported = False
 
-    print('\nChecking support status of binary dependencies...')
+    print("\nChecking support status of binary dependencies...")
     while True:
         try:
             next(control)
         except StopIteration:
             break
 
-        for field in ('Depends', 'Pre-Depends', 'Recommends'):
+        for field in ("Depends", "Pre-Depends", "Recommends"):
             if field not in control.section:
                 continue
-            for or_group in apt.apt_pkg.parse_src_depends(
-                    control.section[field]):
+            for or_group in apt.apt_pkg.parse_src_depends(control.section[field]):
                 pkgname = or_group[0][0]
-                if pkgname.startswith('$'):
+                if pkgname.startswith("$"):
                     continue
                 if not check_support(apt_cache, pkgname):
                     # check non-preferred alternatives
@@ -125,32 +171,33 @@ def check_binary_dependencies(apt_cache, control):
 
 
 def main():
-    description = "Check if any of a package's build or binary " + \
-                  "dependencies are in universe or multiverse. " + \
-                  "Run this inside an unpacked source package"
-    parser = optparse.OptionParser(description=description)
+    parser = argparse.ArgumentParser(description=__doc__)
     parser.parse_args()
     apt_cache = apt.Cache()
 
-    if not os.path.exists('debian/control'):
-        print('debian/control not found. You need to run this tool in a '
-              'source package directory', file=sys.stderr)
+    if not os.path.exists("debian/control"):
+        print(
+            "debian/control not found. You need to run this tool in a source package directory",
+            file=sys.stderr,
+        )
         sys.exit(1)
 
     # get build dependencies from debian/control
-    control = apt.apt_pkg.TagFile(open('debian/control'))
+    control = apt.apt_pkg.TagFile(open("debian/control", encoding="utf-8"))
     next(control)
 
     unsupported_build_deps = check_build_dependencies(apt_cache, control)
     unsupported_binary_deps = check_binary_dependencies(apt_cache, control)
 
     if unsupported_build_deps or unsupported_binary_deps:
-        print('\nPlease check https://wiki.ubuntu.com/MainInclusionProcess if '
-              'this source package needs to get into in main/restricted, or '
-              'reconsider if the package really needs above dependencies.')
+        print(
+            "\nPlease check https://wiki.ubuntu.com/MainInclusionProcess if "
+            "this source package needs to get into in main/restricted, or "
+            "reconsider if the package really needs above dependencies."
+        )
     else:
-        print('All dependencies are supported in main or restricted.')
+        print("All dependencies are supported in main or restricted.")
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

debian/.gitignore

@@ -0,0 +1 @@
+files

debian/changelog

@@ -1,3 +1,585 @@
+ubuntu-dev-tools (0.206) unstable; urgency=medium
+
+  [ Dan Bungert ]
+  * mk-sbuild: enable pkgmaintainermangler
+
+  [ Shengjing Zhu ]
+  * import-bug-from-debian: package option is overridden and not used
+
+  [ Fernando Bravo Hernández ]
+  * Parsing arch parameter to getBinaryPackage() (LP: #2081861)
+
+  [ Simon Quigley ]
+  * Read ~/.devscripts in a more robust way, to ideally pick up multi-line
+    variables (Closes: #725418).
+  * mk-sbuild: default to using UTC for schroots (LP: #2097159).
+  * syncpackage: s/syncblacklist/syncblocklist/g
+  * syncpackage: Cache the sync blocklist in-memory, so it's not fetched
+    multiple times when syncing more than one package.
+  * syncpackage: Catch exceptions cleanly, simply skipping to the next
+    package (erring on the side of caution) if there is an error doing the
+    download (LP: #1943286).
+
+ -- Simon Quigley <tsimonq2@debian.org>  Tue, 04 Mar 2025 13:43:15 -0600
+
+ubuntu-dev-tools (0.205) unstable; urgency=medium
+
+  * [syncpackage] When syncing multiple packages, if one of the packages is in
+    the sync blocklist, do not exit, simply continue.
+  * [syncpackage] Do not use exit(1) on an error or exception unless it
+    applies to all packages, instead return None so we can continue to the
+    next package.
+  * [syncpackage] Add support for -y or --yes, noted that it should be used
+    with care.
+  * Update Standards-Version to 4.7.2, no changes needed.
+
+ -- Simon Quigley <tsimonq2@debian.org>  Sat, 01 Mar 2025 11:29:54 -0600
+
+ubuntu-dev-tools (0.204) unstable; urgency=medium
+
+  [ Simon Quigley ]
+  * Update Standards-Version to 4.7.1, no changes needed.
+  * Add several Lintian overrides related to .pyc files.
+  * Add my name to the copyright file.
+  * Rename bitesize to lp-bitesize (Closes: #1076224).
+  * Add a manpage for running-autopkgtests.
+  * Add a large warning at the top of mk-sbuild encouraging the use of the
+    unshare backend. This is to provide ample warning to users.
+  * Remove mail line from default ~/.sbuildrc, to resolve the undeclared
+    dependency on sendmail (Closes: #1074632).
+
+  [ Julien Plissonneau Duquène ]
+  * Fix reverse-depends -b crash on packages that b-d on themselves
+    (Closes: #1087760).
+
+ -- Simon Quigley <tsimonq2@debian.org>  Mon, 24 Feb 2025 19:54:39 -0600
+
+ubuntu-dev-tools (0.203) unstable; urgency=medium
+
+  [ Steve Langasek ]
+  * ubuntu-build: handle TOCTOU issue with the "can be retried" value on
+    builds.
+  * Recommend sbuild over pbuilder.  sbuild is the tool recommended by
+    Ubuntu developers whose behavior most closely approximates Launchpad
+    builds.
+
+  [ Florent 'Skia' Jacquet ]
+  * import-bug-from-debian: handle multipart message (Closes: #969510)
+
+  [ Benjamin Drung ]
+  * import-bug-from-debian: add type hints
+  * Bump Standards-Version to 4.7.0
+  * Bump year and add missing files to copyright
+  * setup.py: add pm-helper
+  * Format code with black and isort
+  * Address several issues pointed out by Pylint
+  * Depend on python3-yaml for pm-helper
+
+ -- Benjamin Drung <bdrung@debian.org>  Sat, 02 Nov 2024 18:19:24 +0100
+
+ubuntu-dev-tools (0.202) unstable; urgency=medium
+
+  [ Steve Langasek ]
+  * ubuntu-build: support --batch with no package names to retry all
+  * ubuntu-build: in batch mode, print a count of packages retried
+  * ubuntu-build: make the --arch option top-level.
+    This gets rid of the fugly --arch2 option
+  * ubuntu-build: support retrying builds in other states that failed-to-build
+  * ubuntu-build: Handling of proposed vs release pocket default for ppas
+  * ubuntu-build: update manpage
+
+  [ Chris Peterson ]
+  * Replace Depends on python3-launchpadlib with Depends on
+    python3-launchpadlib-desktop (LP: #2049217)
+
+ -- Simon Quigley <tsimonq2@ubuntu.com>  Fri, 12 Apr 2024 23:33:14 -0500
+
+ubuntu-dev-tools (0.201) unstable; urgency=medium
+
+  * running-autopkgtests: fix packaging to make the script available
+    (LP: #2055466)
+
+ -- Chris Peterson <chris.peterson@canonical.com>  Thu, 29 Feb 2024 11:09:14 -0800
+
+ubuntu-dev-tools (0.200) unstable; urgency=medium
+
+  [ Gianfranco Costamagna ]
+  * Team upload
+
+  [ Chris Peterson ]
+  * Add support to see currently running autopkgtests (running-autopkgtests)
+  * running-autopkgtests: use f-strings
+
+  [ Athos Ribeiro ]
+  * syncpackage: log LP authentication errors before halting.
+
+  [ Ying-Chun Liu (PaulLiu) ]
+  * Drop qemu-debootstrap
+    qemu-debootstrap is deprecated for a while. In newer qemu release
+    the command is totally removed. We can use debootstrap directly.
+    Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
+
+  [ Logan Rosen ]
+  * Don't rely on debootstrap for validating Ubuntu distro
+
+ -- Gianfranco Costamagna <locutusofborg@debian.org>  Thu, 15 Feb 2024 17:53:48 +0100
+
+ubuntu-dev-tools (0.199) unstable; urgency=medium
+
+  [ Simon Quigley ]
+  * Add my name to Uploaders.
+
+  [ Steve Langasek ]
+  * Introduce a pm-helper tool.
+
+ -- Simon Quigley <tsimonq2@debian.org>  Mon, 29 Jan 2024 10:03:22 -0600
+
+ubuntu-dev-tools (0.198) unstable; urgency=medium
+
+  * In check-mir, ignore debhelper-compat when checking the build
+    dependencies. This is expected to be a build dependency of all packages,
+    so warning about it in any way is surely a red herring.
+  * Add proper support for virtual packages in check-mir, basing the
+    determination solely off of binary packages. This is not expected to be a
+    typical case.
+
+ -- Simon Quigley <tsimonq2@debian.org>  Wed, 10 Jan 2024 20:04:02 -0600
+
+ubuntu-dev-tools (0.197) unstable; urgency=medium
+
+  * Update the manpage for syncpackage to reflect the ability to sync
+    multiple packages at once.
+  * When using pull-*-source to grab a package which already has a defined
+    Vcs- field, display the exact same warning message `apt source` does.
+
+ -- Simon Quigley <tsimonq2@debian.org>  Tue, 03 Oct 2023 14:01:25 -0500
+
+ubuntu-dev-tools (0.196) unstable; urgency=medium
+
+  * Allow the user to sync multiple packages at one time (LP: #1756748).
+
+ -- Simon Quigley <tsimonq2@debian.org>  Fri, 04 Aug 2023 14:37:59 -0500
+
+ubuntu-dev-tools (0.195) unstable; urgency=medium
+
+  * Add support for the non-free-firmware components in all tools already
+    referencing non-free.
+
+ -- Simon Quigley <tsimonq2@debian.org>  Wed, 26 Jul 2023 13:03:31 -0500
+
+ubuntu-dev-tools (0.194) unstable; urgency=medium
+
+  [ Gianfranco Costamagna ]
+  * ubuntu-build: For some reasons, now you need to be authenticated before
+    trying to use the "PersonTeam" class features.
+    Do it at the begin instead of replicating the same code inside the
+    tool itself.
+
+  [ Steve Langasek ]
+  * Remove references to deprecated
+    http://people.canonical.com/~ubuntu-archive.
+  * Remove references to architectures not supported in any active
+    Ubuntu release.
+  * Remove references to ftpmaster.internal.  When this name is resolvable
+    but firewalled, syncpackage hangs; and these are tools for developers,
+    not for running in an automated context in the DCs where
+    ftpmaster.internal is reachable.
+  * Excise all references to cdbs (including in test cases)
+  * Set apt preferences for the -proposed pocket in mk-sbuild so that
+    it works as expected for lunar and forward.
+
+  [ Robie Basak ]
+  * ubuntutools/misc: swap iter_content for raw stream with "Accept-Encoding:
+    identity" to fix .diff.gz downloads (LP: #2025748).
+
+  [ Vladimir Petko ]
+  * Fix a typo introduced in the last upload that made mk-sbuild fail
+    unconditionally.  LP: #2017177.
+
+ -- Gianfranco Costamagna <locutusofborg@debian.org>  Sat, 08 Jul 2023 08:42:05 +0200
+
+ubuntu-dev-tools (0.193) unstable; urgency=medium
+
+  * Don't run linters at build time, or in autopkgtests. (Closes: #1031436).
+
+ -- Stefano Rivera <stefanor@debian.org>  Sat, 25 Feb 2023 13:19:56 -0400
+
+ubuntu-dev-tools (0.192) unstable; urgency=medium
+
+  [ Benjamin Drung ]
+  * sponsor-patch:
+    + Ignore exit code 1 of debdiff call.
+    + Use --skip-patches instead of --no-preparation with dpkg-source -x.
+  * Demote bzr/brz from Recommends to Suggests, as nowadays git is the way.
+    Closes: #940531
+  * Use PEP440 compliant version in setup.py (LP: #1991606)
+  * Fix issues found by flake8 on the Python scripts
+  * Check Python scripts with flake8 again
+  * Format Python code with black and run black during package build
+  * Sort Python imports with isort and run isort during package build
+  * Replace deprecated optparse with argparse
+  * requestbackport: Remove useless loop from locate_package
+  * reverse-depends: Restore field titles format
+  * test: Fix deprecated return value for test case
+  * Fix all errors and warnings found by pylint and implement most refactorings
+    and conventions. Run pylint during package build again.
+  * Bump Standards-Version to 4.6.2
+  * Drop unneeded X-Python3-Version from d/control
+
+  [ Masahiro Yamada ]
+  * mk-sbuild:
+    + Handle the new location of the Debian bullseye security archive.
+      Closes: #1001832; LP: #1955116
+
+  [ Mattia Rizzolo ]
+  * requestbackport:
+    + Apply patch from Krytarik Raido and Unit 193 to update the template and
+      workflow after the new Ubuntu Backport process has been established.
+      LP: #1959115
+
+ -- Benjamin Drung <bdrung@debian.org>  Wed, 01 Feb 2023 12:45:15 +0100
+
+ubuntu-dev-tools (0.191) unstable; urgency=medium
+
+  [ Dan Streetman ]
+  * lpapicache:
+    + Make sure that login() actually logins and doesn't use cached credentials.
+  * ubuntu-build:
+    + Fix crash caused by a change in lpapicache that changed the default
+      operation mode from authenticated to anonymous.  LP: #1984113
+
+  [ Stefano Rivera ]
+  * backportpackage:
+    + Add support for lsb-release-minimal, which doesn't have a Python module.
+      Thanks to Gioele Barabucci for the patch.  Closes: #1020901; LP: #1991828
+
+  [ Mattia Rizzolo ]
+  * ubuntutools/archive.py:
+    + Fix operation of SourcePackage._source_urls() (as used, for example, in
+      SourcePackage.pull() called by backportpackage) to also work when the
+      class is instantiated with a URL as .dsc.  Fixes regression from v0.184.
+      Thanks to Unit 193 for the initial patch.
+
+ -- Mattia Rizzolo <mattia@debian.org>  Tue, 11 Oct 2022 13:56:03 +0200
+
+ubuntu-dev-tools (0.190) unstable; urgency=medium
+
+  [ Dimitri John Ledkov ]
+  * mk-sbuild:
+    + For ubuntu, fix the debootstrap script to "gutsy", so to allow using
+      mk-sbuild for newer releases without requiring a newer debootstrap.
+
+  [ Gianfranco Costamagna ]
+  * pbuilder-dist: fix typo kernal/kernel
+
+  [ Benjamin Drung ]
+  * Add missing files to debian/copyright
+  * Bump Standards-Version to 4.6.1
+
+ -- Benjamin Drung <bdrung@debian.org>  Thu, 16 Jun 2022 10:55:17 +0200
+
+ubuntu-dev-tools (0.189) unstable; urgency=medium
+
+  [ Heinrich Schuchardt ]
+  * mk-sbuild: don't require pkg-config-<target>. LP: #1966881.
+
+  [ Tobias Heider ]
+  * mk-sbuild: document SCHROOT_TYPE zfs in the manpage.
+
+ -- Mattia Rizzolo <mattia@debian.org>  Mon, 04 Apr 2022 15:03:31 +0200
+
+ubuntu-dev-tools (0.188) unstable; urgency=medium
+
+  [ Mattia Rizzolo ]
+  * archive.py:
+    + Support Python 3.6 by calling functools.lru_cache() as a function, and
+      avoid using @functools.cached_property (both new in Python 3.8).
+
+  [ Graham Inggs ]
+  * lpapicache.py:
+    + Use collections.abc.Callable instead of the long deprecated
+      collections.Callable.  LP: #1959541
+
+ -- Mattia Rizzolo <mattia@debian.org>  Mon, 07 Feb 2022 16:30:07 +0100
+
+ubuntu-dev-tools (0.187) unstable; urgency=medium
+
+  [ Paride Legovini ]
+  * mk-sbuild:
+    + Add support for zfs-snapshot schroots.  LP: #1945349
+
+  [ Mattia Rizzolo ]
+  * mk-sbuild:
+    + Apply patch from Peter Pentchev to avoid a broken log message.
+      Closes: #968316
+  * backportpackage:
+    + Support backporting to Debian releases.  Closes: #776442; LP: #974132
+    + Fix the guessing algorithm for the target release:
+      - for Debian: pick the current stable release.
+      - for Ubuntu: pick the current LTS release.
+
+  [ Unit 193 ]
+  * backportpackage:
+    + Change the generated Ubuntu version following the new policy from the
+      Backporters team.
+
+  [ Dan Streetman ]
+  * misc:
+    + Refactor download progress bar code.
+    + Save files that have Content-Encoding correctly,
+      such as the changes file from upload queue packages.
+  * pullpkg:
+    + Extract source packages pulled from upload queue.
+  * hugdaylist:
+    + Remove long unused and non-working script.
+
+ -- Mattia Rizzolo <mattia@debian.org>  Sun, 05 Dec 2021 15:58:15 +0100
+
+ubuntu-dev-tools (0.186) unstable; urgency=medium
+
+  * Replace nose with pytest (see: #997758).
+
+ -- Stefano Rivera <stefanor@debian.org>  Sun, 24 Oct 2021 16:10:44 -0700
+
+ubuntu-dev-tools (0.185) unstable; urgency=medium
+
+  [ Alex Murray ]
+  * ubuntutools/archive.py:
+    + Fix crash due to PersonalPackageArchiveSourcePackage() returning the
+      wrong object when requesting a download url.  LP: #1938659
+
+  [ Krytarik Raido ]
+  * merge-changelog: Fix setting of newlines.
+
+  [ Dan Streetman ]
+  * misc: download to tmp file, to avoid leftover 0-size file on error
+  * misc: handle ConnectionError as NotFoundError
+  * archive: use proper component source packages sometimes have different
+    component than their bpphs, so use the correct component when downloading
+    binaries (LP: #1943819)
+  * misc: fix flake8 complaints
+
+  [ Stefano Rivera ]
+  * Bump Standards-Version to 4.6.0, no changes needed.
+
+ -- Stefano Rivera <stefanor@debian.org>  Fri, 17 Sep 2021 15:53:02 -0700
+
+ubuntu-dev-tools (0.184) experimental; urgency=medium
+
+  [ Dan Streetman ]
+  * Drop never packaged ubuntu-archive-assistant.
+  * Add support for downloading from private PPAs:
+    + ubuntutools/misc:
+      - Refactor to use Pathlib and f-strings.
+      - Refactor to use requests instead of urllib (for the earier auth)
+    + ubuntutools/archive:
+      - Refactor to use Pathlib.
+      - Add support for the special URLs of private PPAs.
+  * Don't use existing file without verifying their checksum.
+  * tests: recreate the test package files on demand.
+  * Remove no longer used dependencies on python3-termcolor and python3-yaml
+
+  [ Mattia Rizzolo ]
+  * pbuilder-dist: use shutil.which instead of
+    distutils.spawn.find_executable() to save a dependency.  LP: #1936697
+  * d/control:
+    + Drop redundant Recommends that are already in Depends.
+    + Bump debhelper compat level to 13.
+
+  [ Marco Trevisan (Treviño) ]
+  * mk-sbuild:
+    + Enable debugging in the finish.sh script if --debug is used.
+    + Add support to configure ccache for each schroot.
+
+ -- Mattia Rizzolo <mattia@debian.org>  Sat, 17 Jul 2021 17:31:19 +0200
+
+ubuntu-dev-tools (0.183) unstable; urgency=medium
+
+  [ Dan Streetman ]
+  * pbuilder-dist: include missing import
+
+ -- Stefano Rivera <stefanor@debian.org>  Tue, 08 Jun 2021 10:09:11 -0400
+
+ubuntu-dev-tools (0.182) unstable; urgency=medium
+
+  [ Dan Streetman ]
+  * syncpackage, ubuntutools/archive.py:
+    Don't save dsc file to disk until requested with pull()
+    (LP: #1928946)
+  * syncpackage:
+    Don't login to LP if using --simulate
+  * d/t/control: Add minimum flake8 version
+    The --extend-exclude parameter is first available in flake8 3.8.0
+  * ubuntutools/archive.py: Fix flake8 test failure
+  * d/rules, d/control: Override build tests to use flake8 and nosetests3
+
+  [ Stefano Rivera ]
+  * Respect nocheck in DEB_BUILD_OPTIONS, again.
+
+ -- Stefano Rivera <stefanor@debian.org>  Sun, 06 Jun 2021 19:52:18 -0400
+
+ubuntu-dev-tools (0.181) unstable; urgency=medium
+
+  [ Logan Rosen ]
+  * Fix a couple of remaining issues from the py2→py3 move.
+
+  [ Krytarik Raido ]
+  * Fix typo in the logging configuration.
+
+  [ Dan Streetman ]
+  * pbuilder: Handle debian change from /updates to -security.  LP: #1916633
+    Starting in bullseye, the security suite is -security instead of /updates.
+  * backportpackage: Don't use SourcePackage() directly.  Closes: #983854
+    As the warning from 2010 says, don't use this class directly.
+
+  [ Balint Reczey ]
+  * mk-sbuild:
+    + Use eatmydata only with the dpkg command.
+      Eatmydata wrapping the build as well could break tests.
+      Thanks to Julian Andres Klode for suggesting this solution
+    + Use eatmydata by default.
+      Since only the dpkg is wrapped in eatmydata it should be the safe and
+      fast default. Eatmydata is widely used around apt thus it should be a
+      serious bug if a package can't be installed with eatmydata in use.
+
+  [ Marco Trevisan (Treviño) ]
+  * doc/mk-sbuild.1: Add documentation for --debootstrap-proxy and
+    DEBOOTSTRAP_PROXY.  LP: #1926166
+
+ -- Mattia Rizzolo <mattia@debian.org>  Sun, 02 May 2021 19:56:48 +0200
+
+ubuntu-dev-tools (0.180) unstable; urgency=medium
+
+  * Drop coverage in the autopkgtest, as python3-nose-cov is not in Debian.
+
+ -- Mattia Rizzolo <mattia@debian.org>  Fri, 19 Feb 2021 12:12:33 +0100
+
+ubuntu-dev-tools (0.179) unstable; urgency=medium
+
+  [ Stefano Rivera ]
+  * archive.py: Evaluate the filter() fixing Debian source history queries
+    LP: #1913330
+
+  [ Dan Streetman ]
+  * allow running tests using tox
+  * add autopkgtests to run tests
+  * simplify/combine archive download functions
+  * add support for private ppa by logging into lp
+  * improve support for pull-uca-*
+  * fix logging/printing output to stdout/stderr
+
+ -- Dan Streetman <ddstreet@canonical.com>  Mon, 01 Feb 2021 11:59:03 -0500
+
+ubuntu-dev-tools (0.178) unstable; urgency=medium
+
+  [ Dan Streetman ]
+  * pullpkg: also catch and deal with InvalidPullValueError.  LP: #1908770
+
+  [ Mattia Rizzolo ]
+  * d/control: Bump Standards-Version to 4.5.1, no changes needed.
+  * ubuntu-archive-assistant/mir: Fix a SyntaxWarning.
+  * backportpackage:
+    + Add a -e/--message option to change the default "No-change"
+      in "No-change backport to DIST".
+      Thanks to Unit 193 for the initial patch.
+
+  [ You-Sheng Yang ]
+  * Add a dependency on tzdata, used by mk-sbuild.
+
+  [ Logan Rosen ]
+  * import-bug-from-debian:
+    + Limit bug description length to 50k chars to support Launchpad's limits.
+      LP: #1193941
+
+  [ Dimitri John Ledkov ]
+  * pullpkg.py: fix --mirror option parsing.
+  * config.py: add UBUNTU_INTERNAL_MIRROR option, for launchpad internal
+    mirror.
+  * archive.py: use Regular, Ports, and Internal mirrors by default. Thus
+    enabling pull-lp-debs to work with ports architectures, and inside
+    launchpad builds too.
+
+  [ Michael R. Crusoe ]
+  * pbuilder-dist:
+    + Use `arch-test` to determine whether the current system can run binaries
+      of the requested architecture, instead of hardcoding an ever-growing
+      list of whether something requires qemu or not.  Add the "arch-test"
+      package to Recommends to that effect.
+
+ -- Dimitri John Ledkov <xnox@ubuntu.com>  Mon, 25 Jan 2021 23:28:24 +0000
+
+ubuntu-dev-tools (0.177) unstable; urgency=medium
+
+  [ Dan Streetman ]
+  * Verify checksums for downloaded binary files
+  * pullpkg: support pulling from Ubuntu upload queues
+
+  [ Mattia Rizzolo ]
+  * ubuntu-build:
+    + Add support for riscv64.
+  * syncpackge:
+    + Fix the new flake8 E741.  Closes: #963310
+
+  [ Bryce Harrington ]
+  * update-maintainer:
+    + Try to recurse upwards to find a valid debian directory.  LP: #1885233
+
+ -- Mattia Rizzolo <mattia@debian.org>  Sun, 28 Jun 2020 15:52:27 +0200
+
+ubuntu-dev-tools (0.176) unstable; urgency=medium
+
+  [ Debian Janitor ]
+  * Fix day-of-week for changelog entry 0.66.
+
+  [ Mattia Rizzolo ]
+  * pbuilder-dist:
+    + Add support for riscv64.  LP: #1859277
+  * d/control: Bump Standards-Version to 4.5.0, no changes needed.
+
+  [ Colin Watson ]
+  * Use +sourcefiles URLs where possible.  LP: #1860456
+
+  [ Dan Streetman ]
+  * submittodebian:
+    + Open file in binary mode before writing utf-8 encoded bytes.  LP: #1863119
+  * ubuntu-upload-permission:
+    + Explicitly sort packagesets by name.  LP: #1862372
+  * pullpkg:
+    + For "-p list", show bpph arch for files built for 'all' arch.
+  * archive.py:
+    + If using local file, avoid error trying to copy file to itself.
+    + Allow pull_binaries() to accept arch=None.
+  * lpapicache:
+    + Remove SPPH _have_all_binaries flag, as there are cases where it yield
+      unexpected results.
+    + Remove fallback_arch from getBinaries.
+    + Allow getBinaries(arch=None) to get all archs.  LP: #1862286
+
+ -- Mattia Rizzolo <mattia@debian.org>  Sun, 23 Feb 2020 13:03:21 +0100
+
+ubuntu-dev-tools (0.175) unstable; urgency=medium
+
+  [ Mattia Rizzolo ]
+  * Trust the installed debian-keyring when checking validity of dsc
+    signatures.
+  * requestbackport:
+    + Error out nicely when a tracking project doesn't exist.  LP: #1852901
+  * d/control: Bump Standards-Version to 4.4.1, no changes needed.
+
+  [ Stefano Rivera ]
+  * merge-changelog: rewrite the changelog handling to use python3-debian.
+
+  [ Dan Streetman ]
+  * tests/pylint.conf: use jobs=0 to speed up tests.
+  * submittodebian: use a context manager while opening a file.
+  * d/control: add dependency on python3-lazr.restfulclient.
+  * Big refactor/rewrite of the whole archive.py module, together with a
+    restracturing of all the pull-pkg-* commands.
+  * Unify the logging using the standard python logging module, and remove the
+    local ubuntutools.logger module.
+
+ -- Mattia Rizzolo <mattia@debian.org>  Sun, 01 Dec 2019 19:36:23 +0100
+
 ubuntu-dev-tools (0.174) unstable; urgency=medium
 
   [ Stefano Rivera ]
@@ -2359,7 +2941,7 @@ ubuntu-dev-tools (0.66) jaunty; urgency=low
   [ Jonathan Davies ]
   * Added grab-merge from merges.ubuntu.com (LP: #155098).
 
- -- Jonathan Davies <jpds@ubuntu.com>  Thu, 09 Mar 2009 17:01:19 +0000
+ -- Jonathan Davies <jpds@ubuntu.com>  Mon, 09 Mar 2009 17:01:19 +0000
 
 ubuntu-dev-tools (0.65) jaunty; urgency=low
 
@@ -3186,10 +3768,10 @@ ubuntu-dev-tools (0.25) hardy; urgency=low
       didn't work  (LP: #175183)
     - added support for --http-proxy, honours now $http_proxy or $HTTP_PROXY
     - removed $COMPONENTS_LINE from pbuilder call, data is crippled in the
-      pbuilder chroot.
-      Instead of this behaviour add $BASE_DIR/etc/$DISTRIBUTION/apt.conf/
-      directory and install a sane sources.list, depending on the releases of Ubuntu
-      and add --aptconfdir to pbuilder call (LP: #175183)
+      pbuilder chroot. Instead of this behaviour add
+      $BASE_DIR/etc/$DISTRIBUTION/apt.conf/ directory and install a sane
+      sources.list, depending on the releases of Ubuntu and add --aptconfdir to
+      pbuilder call (LP: #175183)
     - add support for gksudo|kdesudo|sudo depending on $DESKTOP_SESSION.
       or if $PBUILDAUTH is set to something else, it will be used instead of
       sudo|gksudo|kdesudo (LP: #172943)
@@ -3437,7 +4019,8 @@ ubuntu-dev-tools (0.11) gutsy; urgency=low
 
   [ Siegfried-Angel Gevatter Pujals (RainCT) ]
   * Added a manpage for suspicious-source.
-  * Fixed a bug in pbuilder-dist (it needed ftp.debian.org in sources.list to work with Debian).
+  * Fixed a bug in pbuilder-dist (it needed ftp.debian.org in sources.list to
+    work with Debian).
 
  -- Daniel Holbach <daniel.holbach@ubuntu.com>  Mon, 24 Sep 2007 09:39:24 +0200
 

debian/clean

@@ -1,2 +1 @@
 *.egg-info/
-test-data/example_*

debian/control

@@ -6,34 +6,36 @@ Uploaders:
  Benjamin Drung <bdrung@debian.org>,
  Stefano Rivera <stefanor@debian.org>,
  Mattia Rizzolo <mattia@debian.org>,
+ Simon Quigley <tsimonq2@debian.org>,
 Build-Depends:
+ black <!nocheck>,
  dctrl-tools,
- debhelper-compat (= 12),
+ debhelper-compat (= 13),
  devscripts (>= 2.11.0~),
+ dh-make,
  dh-python,
  distro-info (>= 0.2~),
- libwww-perl,
+ flake8,
+ isort <!nocheck>,
  lsb-release,
- pylint (>= 2),
+ pylint <!nocheck>,
  python3-all,
  python3-apt,
+ python3-dateutil,
  python3-debian,
  python3-debianbts,
  python3-distro-info,
- python3-flake8,
  python3-httplib2,
- python3-launchpadlib,
- python3-mock,
+ python3-launchpadlib-desktop,
+ python3-pytest,
  python3-requests <!nocheck>,
  python3-setuptools,
- python3-termcolor <!nocheck>,
  python3-yaml <!nocheck>,
-Standards-Version: 4.4.0
+Standards-Version: 4.7.2
 Rules-Requires-Root: no
 Vcs-Git: https://git.launchpad.net/ubuntu-dev-tools
 Vcs-Browser: https://git.launchpad.net/ubuntu-dev-tools
 Homepage: https://launchpad.net/ubuntu-dev-tools
-X-Python3-Version: >= 3.6
 
 Package: ubuntu-dev-tools
 Architecture: all
@@ -44,38 +46,40 @@ Depends:
  diffstat,
  distro-info (>= 0.2~),
  dpkg-dev,
+ dput,
  lsb-release,
  python3,
  python3-apt,
  python3-debian,
+ python3-debianbts,
  python3-distro-info,
  python3-httplib2,
- python3-launchpadlib,
+ python3-launchpadlib-desktop,
  python3-lazr.restfulclient,
  python3-ubuntutools (= ${binary:Version}),
+ python3-yaml,
  sensible-utils,
  sudo,
+ tzdata,
  ${misc:Depends},
  ${perl:Depends},
 Recommends:
- bzr | brz,
- bzr-builddeb | brz-debian,
+ arch-test,
  ca-certificates,
  debian-archive-keyring,
  debian-keyring,
  debootstrap,
- dput,
  genisoimage,
- libwww-perl,
  lintian,
  patch,
- pbuilder | cowbuilder | sbuild,
- python3-debianbts,
+ sbuild | pbuilder | cowbuilder,
  python3-dns,
  quilt,
  reportbug (>= 3.39ubuntu1),
  ubuntu-keyring | ubuntu-archive-keyring,
 Suggests:
+ bzr | brz,
+ bzr-builddeb | brz-debian,
  qemu-user-static,
 Description: useful tools for Ubuntu developers
  This is a collection of useful tools that Ubuntu developers use to make their
@@ -92,7 +96,6 @@ Description: useful tools for Ubuntu developers
   - dch-repeat - used to repeat a change log into an older release.
   - grab-merge - grabs a merge from merges.ubuntu.com easily.
   - grep-merges - search for pending merges from Debian.
-  - hugdaylist - compile HugDay lists from bug list URLs.
   - import-bug-from-debian - copy a bug from the Debian BTS to Launchpad
   - merge-changelog - manually merges two Debian changelogs with the same base
     version.
@@ -104,12 +107,19 @@ Description: useful tools for Ubuntu developers
     a Debian package and its immediate parent to generate a debdiff.
   - pull-debian-source - downloads the latest source package available in
     Debian of a package.
-  - pull-lp-source - downloads latest source package from Launchpad.
-  - pull-revu-source - downloads the latest source package from REVU
+  - pull-lp-source - downloads source package from Launchpad.
+  - pull-lp-debs - downloads debs package(s) from Launchpad.
+  - pull-lp-ddebs - downloads dbgsym/ddebs package(s) from Launchpad.
+  - pull-lp-udebs - downloads udebs package(s) from Launchpad.
+  - pull-debian-* - same as pull-lp-* but for Debian packages.
+  - pull-uca-* - same as pull-lp-* but for Ubuntu Cloud Archive packages.
+  - pull-pkg - common script that provides above pull-* functionality.
   - requestbackport - file a backporting request.
   - requestsync - files a sync request with Debian changelog and rationale.
   - reverse-depends - find the reverse dependencies (or build dependencies) of
     a package.
+  - running-autopkgtests - lists the currently running and/or queued
+    autopkgtests on the Ubuntu autopkgtest infrastructure
   - seeded-in-ubuntu - query if a package is safe to upload during a freeze.
   - setup-packaging-environment - assistant to get an Ubuntu installation
     ready for packaging work.
@@ -128,10 +138,13 @@ Package: python3-ubuntutools
 Architecture: all
 Section: python
 Depends:
+ python3-dateutil,
  python3-debian,
  python3-distro-info,
  python3-httplib2,
- python3-launchpadlib,
+ python3-launchpadlib-desktop,
+ python3-lazr.restfulclient,
+ python3-requests,
  sensible-utils,
  ${misc:Depends},
  ${python3:Depends},

debian/copyright

@@ -3,26 +3,30 @@ Upstream-Name: Ubuntu Developer Tools
 Upstream-Contact: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
 Source: https://launchpad.net/ubuntu-dev-tools
 
-Files: *
-       backportpackage
+Files: backportpackage
        bash_completion/pbuilder-dist
        check-symbols
+       debian/*
        doc/backportpackage.1
        doc/check-symbols.1
        doc/requestsync.1
        doc/ubuntu-iso.1
+       doc/running-autopkgtests.1
+       GPL-2
+       README.updates
        requestsync
        setup.py
+       TODO
        ubuntu-iso
-       ubuntutools/requestsync/lp.py
-       ubuntutools/requestsync/mail.py
+       ubuntutools/requestsync/*.py
 Copyright: 2007,      Albert Damen <albrt@gmx.net>
-           2010,      Benjamin Drung <bdrung@ubuntu.com>
-           2007-2010, Canonical Ltd.
+           2010-2024, Benjamin Drung <bdrung@ubuntu.com>
+           2007-2023, Canonical Ltd.
            2006-2007, Daniel Holbach <daniel.holbach@ubuntu.com>
            2010,      Evan Broder <evan@ebroder.net>
            2006-2007, Luke Yelavich <themuso@ubuntu.com>
            2009-2010, Michael Bienia <geser@ubuntu.com>
+           2024-2025, Simon Quigley <tsimonq2@debian.org>
            2010-2011, Stefano Rivera <stefanor@ubuntu.com>
            2008,      Stephan Hermann <sh@sourcecode.de>
            2007,      Steve Kowalik <stevenk@ubuntu.com>
@@ -70,20 +74,28 @@ License: GPL-2+
  On Debian systems, the complete text of the GNU General Public License
  version 2 can be found in the /usr/share/common-licenses/GPL-2 file.
 
-Files: doc/bitesize.1
+Files: doc/lp-bitesize.1
+       doc/check-mir.1
        doc/grab-merge.1
-       doc/hugdaylist.1
        doc/merge-changelog.1
+       doc/pm-helper.1
        doc/setup-packaging-environment.1
        doc/syncpackage.1
-       bitesize
+       lp-bitesize
+       check-mir
+       GPL-3
        grab-merge
-       hugdaylist
        merge-changelog
+       pm-helper
+       pyproject.toml
+       run-linters
+       running-autopkgtests
        setup-packaging-environment
        syncpackage
-Copyright: 2010,      Benjamin Drung <bdrung@ubuntu.com>
-           2007-2011, Canonical Ltd.
+       ubuntutools/running_autopkgtests.py
+       ubuntutools/utils.py
+Copyright: 2010-2024, Benjamin Drung <bdrung@ubuntu.com>
+           2007-2024, Canonical Ltd.
            2008,      Jonathan Patrick Davies <jpds@ubuntu.com>
            2008-2010, Martin Pitt <martin.pitt@canonical.com>
            2009,      Siegfried-Angel Gevatter Pujals <rainct@ubuntu.com>
@@ -105,17 +117,23 @@ Files: dch-repeat
        doc/dch-repeat.1
        doc/grep-merges.1
        doc/mk-sbuild.1
-       doc/pull-lp-source.1
-       doc/pull-revu-source.1
+       doc/pull-pkg.1
        doc/ubuntu-build.1
        grep-merges
        mk-sbuild
-       pull-lp-source
-       pull-revu-source
+       pull-pkg
+       pull-*debs
+       pull-*-source
+       requirements.txt
+       test-requirements.txt
+       tox.ini
        ubuntu-build
-       ubuntutools/lp/libsupport.py
+       ubuntutools/__init__.py
+       ubuntutools/lp/__init__.py
        ubuntutools/lp/lpapicache.py
+       ubuntutools/lp/udtexceptions.py
        ubuntutools/misc.py
+       ubuntutools/pullpkg.py
 Copyright: 2007-2010, Canonical Ltd.
            2008-2009, Iain Lane <iain@orangesquash.org.uk>
            2006,      John Dong <jdong@ubuntu.com>
@@ -141,7 +159,6 @@ License: GPL-3+
  version 3 can be found in the /usr/share/common-licenses/GPL-3 file.
 
 Files: doc/pull-debian-debdiff.1
-       doc/pull-debian-source.1
        doc/requestbackport.1
        doc/reverse-depends.1
        doc/seeded-in-ubuntu.1
@@ -151,12 +168,10 @@ Files: doc/pull-debian-debdiff.1
        doc/update-maintainer.1
        enforced-editing-wrapper
        pull-debian-debdiff
-       pull-debian-source
        requestbackport
        reverse-depends
        seeded-in-ubuntu
        sponsor-patch
-       test-data/*
        ubuntu-upload-permission
        ubuntutools/archive.py
        ubuntutools/builder.py
@@ -166,11 +181,15 @@ Files: doc/pull-debian-debdiff.1
        ubuntutools/sponsor_patch/*
        ubuntutools/test/*
        ubuntutools/update_maintainer.py
+       ubuntutools/version.py
        update-maintainer
-Copyright: 2009-2011, Benjamin Drung <bdrung@ubuntu.com>
+       .pylintrc
+Copyright: 2009-2024, Benjamin Drung <bdrung@ubuntu.com>
            2010,      Evan Broder <evan@ebroder.net>
            2008,      Siegfried-Angel Gevatter Pujals <rainct@ubuntu.com>
            2010-2011, Stefano Rivera <stefanor@ubuntu.com>
+           2017-2021, Dan Streetman <ddstreet@canonical.com>
+           2024,      Canonical Ltd.
 License: ISC
  Permission to use, copy, modify, and/or distribute this software for any
  purpose with or without fee is hereby granted, provided that the above

debian/rules

@@ -1,4 +1,14 @@
 #!/usr/bin/make -f
 
+override_dh_auto_clean:
+	dh_auto_clean
+	rm -f .coverage
+	rm -rf .tox
+
+override_dh_auto_test:
+ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS)))
+	python3 -m pytest -v ubuntutools
+endif
+
 %:
 	dh $@ --with python3 --buildsystem=pybuild

debian/source/lintian-overrides

@@ -0,0 +1,3 @@
+# pyc files are machine-generated; they're expected to have long lines and have unstated copyright
+source: file-without-copyright-information *.pyc [debian/copyright]
+source: very-long-line-length-in-source-file * > 512 [*.pyc:*]

debian/tests/control

@@ -1,4 +1,7 @@
-Test-Command: set -ex ; for i in $(py3versions -s) ; do "$i" setup.py test; done
+Test-Command: python3 -m pytest -v ubuntutools
 Depends:
- @builddeps@,
+ dh-make,
+ python3-pytest,
+ python3-setuptools,
+ @,
 Restrictions: allow-stderr

doc/hugdaylist.1

@@ -1,26 +0,0 @@
-.TH HUGDAYLIST "1" "August 27, 2008" "ubuntu-dev-tools"
-
-.SH NAME
-hugdaylist \- produce MoinMoin wiki formatted tables based on a Launchpad bug list
-
-.SH SYNOPSIS
-.B hugdaylist [\fB\-n\fP|\fB\-\-number <NUMBER>\fP] \fBlaunchpad-buglist-url\fP
-
-.SH DESCRIPTION
-\fBhugdaylist\fP produces MoinMoin wiki formatted tables based on a
-Launchpad bug list
-
-.SH OPTIONS
-.TP
-\fB\-\-number=<NUMBER>\fP
-This option allows you to specify the number of entries to output.
-.TP
-\fBlaunchpad-buglist-url\fP
-Required, this option is a URL pointing to a launchpad bug list.
-
-.SH AUTHOR
-\fBhugdaylist\fP has been written by Canonical Ltd., Daniel Holbach
-<daniel.holbach@canonical.com> and Jonathan Patrick Davies <jpds@ubuntu.com>.
-This manual page was written by Ryan Kavanagh <ryanakca@kubuntu.org>.
-.PP
-Both are released under the GNU General Public License, version 3.

doc/lp-bitesize.1

@@ -1,21 +1,21 @@
-.TH bitesize "1" "May 9 2010" "ubuntu-dev-tools"
+.TH lp-bitesize "1" "May 9 2010" "ubuntu-dev-tools"
 .SH NAME
-bitesize \- Add \fBbitesize\fR tag to bugs and add a comment.
+lp-bitesize \- Add \fBbitesize\fR tag to bugs and add a comment.
 
 .SH SYNOPSIS
-.B bitesize \fR<\fIbug number\fR>
+.B lp-bitesize \fR<\fIbug number\fR>
 .br
-.B bitesize \-\-help
+.B lp-bitesize \-\-help
 
 .SH DESCRIPTION
-\fBbitesize\fR adds a bitesize tag to the bug, if it's not there yet. It
+\fBlp-bitesize\fR adds a bitesize tag to the bug, if it's not there yet. It
 also adds a comment to the bug indicating that you are willing to help with
 fixing it.
 It checks for permission to operate on a given bug first,
 then perform required tasks on Launchpad.
 
 .SH OPTIONS
-Listed below are the command line options for \fBbitesize\fR:
+Listed below are the command line options for \fBlp-bitesize\fR:
 .TP
 .BR \-h ", " \-\-help
 Display a help message and exit.
@@ -48,7 +48,7 @@ The default value for \fB--lpinstance\fR.
 .BR ubuntu\-dev\-tools (5)
 
 .SH AUTHORS
-\fBbitesize\fR and this manual page were written by Daniel Holbach
+\fBlp-bitesize\fR and this manual page were written by Daniel Holbach
 <daniel.holbach@canonical.com>.
 .PP
 Both are released under the terms of the GNU General Public License, version 3.

doc/mk-sbuild.1

@@ -64,6 +64,15 @@ Disable checking gpg signatures of downloaded Release files by using
 debootstrap's \fB\-\-no\-check\-gpg\fR option. See \fBdebootstrap\fR (8)
 for more details.
 .TP
+.B \-\-debootstrap\-proxy\fR=\fIPROXY
+Use \fIPROXY\fR as apt proxy.
+.TP
+.B \-\-eatmydata
+Install and use eatmydata (default)
+.TP
+.B \-\-skip\-eatmydata
+Don't install and use eatmydata
+.TP
 .B \-\-distro\fR=\fIDISTRO
 Enable distro-specific logic.
 When not provided, the distribution is determined from \fIrelease\fR.
@@ -74,10 +83,31 @@ Specify a volume group, and subsequently use a default \fBSCHROOT_TYPE\fR of
 "\fBlvm-snapshot\fR" rather than "\fBdirectory\fR" (via overlayfs or
 aufs) mounts.
 .TP
+.B \-\-zfs-dataset=\fIDATASET
+Specify a zfs dataset, and subsequently use a default \fBSCHROOT_TYPE\fR of
+"\fBzfs-snapshot\fR" rather than "\fBdirectory\fR" (via overlayfs or
+aufs) mounts.
+.TP
 .B \-\-type\fR=\fISHROOT_TYPE
 Specify a \fBSCHROOT_TYPE\fR.  Supported values are "\fBdirectory\fR"
 (default if \fB\-\-vg\fR not specified), "\fBlvm-snapshot\fR" (default
-if \fB\-\-vg\fR specified), "\fBbtrfs-snapshot\fR", and "\fBfile\fR".
+if \fB\-\-vg\fR specified), "\fBbtrfs-snapshot\fR", "\fBzfs-snapshot\fR"
+and "\fBfile\fR".
+.TP
+.B \-\-ccache
+Enable usage of \fBccache\fR by default. See \fBccache\fR (1) for
+more details.
+.TP
+.B \-\-ccache-dir=\fIPATH
+Use \fBPATH\fR as schroot ccache directory. This directory can be
+safely shared by multiple schroots, but they will all use the same
+\fBCCACHE_MAXSIZE\fR.
+Defaults to /var/cache/ccache-sbuild.
+See \fBccache\fR (1) for more details.
+.TP
+.B \-\-ccache-size=\fISIZE
+Sets \fBSIZE\fR as the schroot \fBCCACHE_DIR\fR max-size used by ccache.
+See \fBccache\fR (1) for more details.
 
 .SH ENVIRONMENT VARIABLES
 .TP
@@ -120,6 +150,14 @@ Keyring file to use for checking gpg signatures of retrieved release files
 Disable gpg verification of retrieved release files (same as
 \fB\-\-debootstrap\-no\-check\-gpg\fR)
 .TP
+.B DEBOOTSTRAP_PROXY
+Proxy to use for apt. (same as
+\fB\-\-debootstrap\-proxy\fR)
+.TP
+.B EATMYDATA
+Enable or disable eatmydata usage, see \fB\-\-eatmydata\fR
+and \fB\-\-skip\-eatmydata\fR
+.TP
 .B SOURCE_CHROOTS_DIR
 Use \fBSOURCE_CHROOTS_DIR\fR as home of schroot source directories.
 (default \fB/var/lib/schroot/chroots\fR)
@@ -131,6 +169,18 @@ Use \fBSOURCE_CHROOTS_TGZ\fR as home of schroot source tarballs.
 .B CHROOT_SNAPSHOT_DIR
 Use \fBCHROOT_SNAPSHOT_DIR\fR as home of mounted btrfs snapshots.
 (default \fB/var/lib/schroot/snapshots\fR)
+.TP
+.B CCACHE
+Enable \fBccache\fR (1) by default.
+(defaults to \fB0\fR)
+.TP
+.B CCACHE_DIR
+Use \fBCCACHE_DIR\fR as the \fBccache\fR (1) directory.
+(default \fB/var/cache/ccache-sbuild\fR)
+.TP
+.B CCACHE_SIZE
+Use \fBCCACHE_SIZE\fR as the \fBccache\fR (1) max-size.
+(defaults to \fB4G\fR)
 
 
 .SH FILES

doc/pbuilder-dist.1

@@ -20,7 +20,7 @@ like for example \fBpbuilder\-feisty\fP, \fBpbuilder\-sid\fP, \fBpbuilder\-gutsy
 .PP
 The same applies to \fBcowbuilder\-dist\fP, which uses cowbuilder. The main
 difference between both is that pbuilder compresses the created chroot as a
-a tarball, thus using less disc space but needing to uncompress (and possibly
+tarball, thus using less disc space but needing to uncompress (and possibly
 compress) its contents again on each run, and cowbuilder doesn't do this.
 
 .SH USAGE
@@ -38,7 +38,7 @@ This optional parameter will attempt to construct a chroot in a foreign
 architecture.
 For some architecture pairs (e.g. i386 on an amd64 install), the chroot
 will be created natively.
-For others (e.g. armel on an i386 install), qemu\-user\-static will be
+For others (e.g. arm64 on an amd64 install), qemu\-user\-static will be
 used.
 Note that some combinations (e.g. amd64 on an i386 install) require
 special separate kernel handling, and may break in unexpected ways.

doc/pm-helper.1

@@ -0,0 +1,44 @@
+.\" Copyright (C) 2023, Canonical Ltd.
+.\"
+.\" This program is free software; you can redistribute it and/or
+.\" modify it under the terms of the GNU General Public License, version 3.
+.\"
+.\" This program is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+.\" General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public License
+.\" along with this program.  If not, see <http://www.gnu.org/licenses/>.
+.TH pm\-helper 1 "June 2023" ubuntu\-dev\-tools
+
+.SH NAME
+pm\-helper \- helper to guide a developer through proposed\-migration work
+
+.SH SYNOPSIS
+.B pm\-helper \fR[\fIoptions\fR] [\fIpackage\fR]
+
+.SH DESCRIPTION
+Claim a package from proposed\-migration to work on and get additional
+information (such as the state of the package in Debian) that may be helpful
+in unblocking it.
+.PP
+This tool is incomplete and under development.
+
+.SH OPTIONS
+.TP
+.B \-l \fIINSTANCE\fR, \fB\-\-launchpad\fR=\fIINSTANCE\fR
+Use the specified instance of Launchpad (e.g. "staging"), instead of
+the default of "production".
+.TP
+.B \-v\fR, \fB--verbose\fR
+be more verbose
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+Display a help message and exit
+
+.SH AUTHORS
+\fBpm\-helper\fR and this manpage were written by Steve Langasek
+<steve.langasek@ubuntu.com>.
+.PP
+Both are released under the GPLv3 license.

doc/pull-debian-ddebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-debian-debs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-debian-source.1

@@ -1,89 +0,0 @@
-.\" Copyright (C) 2010-2011, Stefano Rivera <stefanor@ubuntu.com>
-.\"
-.\" Permission to use, copy, modify, and/or distribute this software for any
-.\" purpose with or without fee is hereby granted, provided that the above
-.\" copyright notice and this permission notice appear in all copies.
-.\"
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-.\" OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
-.TH PULL\-DEBIAN\-SOURCE "1" "22 January 2011" "ubuntu\-dev\-tools"
-
-.SH NAME
-pull\-debian\-source \- download and extract a source package from Debian
-
-.SH SYNOPSIS
-.B pull\-debian\-source \fR[\fIoptions\fR] <\fIsource package\fR>
-[\fIrelease\fR|\fIversion\fR]
-
-.SH DESCRIPTION
-\fBpull\-debian\-source\fR downloads and extracts the specified
-\fIversion\fR of \fIsource package\fR, or the latest version in the
-specified Debian \fIrelease\fR.
-.P
-\fBpull\-debian\-source\fR will try the preferred mirror, default
-mirror, security mirror, and fall back to \fBLaunchpad\fR or
-\fBsnapshot.debian.org\fR, in search of the requested version.
-
-.SH OPTIONS
-.TP
-.I source package
-The source package to download from Debian.
-.TP
-.I release
-The release to download the source package from. Defaults to
-\fBunstable\fR.
-.TP
-.I version
-The specific version of the package to download.
-.TP
-.BR \-d ", " \-\-download\-only
-Do not extract the source package.
-.TP
-.B \-m \fIDEBIAN_MIRROR\fR, \fB\-\-mirror\fR=\fIDEBIAN_MIRROR\fR
-Use the specified mirror.
-Should be in the form \fBhttp://ftp.debian.org/debian\fR.
-If the package isn't found on this mirror, \fBpull\-debian\-source\fR
-will fall back to the default mirror.
-.TP
-.B \-s \fIDEBSEC_MIRROR\fR, \fB\-\-security\-mirror\fR=\fIDEBSEC_MIRROR\fR
-Use the specified mirror.
-Should be in the form \fBhttp://security.debian.org\fR.
-If the package isn't found on this mirror, \fBpull\-debian\-source\fR
-will fall back to the default mirror.
-.TP
-.B \-\-no\-conf
-Do not read any configuration files, or configuration from environment
-variables.
-.TP
-.BR \-h ", " \-\-help
-Display the usage instructions and exit.
-
-.SH ENVIRONMENT
-All of the \fBCONFIGURATION VARIABLES\fR below are also supported as
-environment variables.
-Variables in the environment take precedence to those in configuration
-files.
-
-.SH CONFIGURATION VARIABLES
-The following variables can be set in the environment or in
-.BR ubuntu\-dev\-tools (5)
-configuration files.
-In each case, the script\-specific variable takes precedence over the
-package\-wide variable.
-.TP
-.BR PULL_DEBIAN_SOURCE_DEBIAN_MIRROR ", " UBUNTUTOOLS_DEBIAN_MIRROR
-The default value for \fB\-\-mirror\fR.
-.TP
-.BR PULL_DEBIAN_SOURCE_DEBSEC_MIRROR ", " UBUNTUTOOLS_DEBSEC_MIRROR
-The default value for \fB\-\-security\-mirror\fR.
-
-.SH SEE ALSO
-.BR dget (1),
-.BR pull\-debian\-debdiff (1),
-.BR pull\-lp\-source (1),
-.BR ubuntu\-dev\-tools (5)

doc/pull-debian-source.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-debian-udebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-lp-ddebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-lp-debs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-lp-source.1

@@ -1,79 +0,0 @@
-.TH PULL\-LP\-SOURCE "1" "4 August 2008" "ubuntu-dev-tools"
-
-.SH NAME
-pull\-lp\-source \- download a source package from Launchpad
-
-.SH SYNOPSIS
-.B pull\-lp\-source \fR[\fIoptions\fR]\fB \fBsource package\fR
-[\fIrelease\fR|\fIversion\fR]
-
-.SH DESCRIPTION
-\fBpull\-lp\-source\fR downloads and extracts the specified
-\fIversion\fR of <\fBsource package\fR> from Launchpad, or the latest
-version of the specified \fIrelease\fR.
-To request a version from a particular pocket say
-\fIrelease\fB\-\fIpocket\fR (with a magic \fB\-release\fR for only the
-release pocket).
-If no \fIversion\fR or \fIrelease\fR is specified, the latest version in
-the development release will be downloaded.
-
-.SH OPTIONS
-Listed below are the command line options for pull\-lp\-source:
-.TP
-.B source package
-This is the source package that you would like to be downloaded from Launchpad.
-.TP
-.B version
-This is the version of the source package to be downloaded.
-.TP
-.B release
-This is the release that you would like the source package to be downloaded from.
-This value defaults to the current development release.
-.TP
-.BR \-h ", " \-\-help
-Display a help message and exit.
-.TP
-.BR \-d ", " \-\-download\-only
-Do not extract the source package.
-.TP
-.B \-m \fIUBUNTU_MIRROR\fR, \fB\-\-mirror\fR=\fIUBUNTU_MIRROR\fR
-Use the specified Ubuntu mirror.
-Should be in the form \fBhttp://archive.ubuntu.com/ubuntu\fR.
-If the package isn't found on this mirror, \fBpull\-lp\-source\fR will
-fall back to Launchpad, as its name implies.
-.TP
-.B \-\-no\-conf
-Do not read any configuration files, or configuration from environment
-variables.
-
-.SH ENVIRONMENT
-All of the \fBCONFIGURATION VARIABLES\fR below are also supported as
-environment variables.
-Variables in the environment take precedence to those in configuration
-files.
-.TP
-.B
-DIST
-Specifies the default target.
-
-.SH CONFIGURATION VARIABLES
-The following variables can be set in the environment or in
-.BR ubuntu\-dev\-tools (5)
-configuration files.
-In each case, the script\-specific variable takes precedence over the
-package\-wide variable.
-.TP
-.BR PULL_LP_SOURCE_UBUNTU_MIRROR ", " UBUNTUTOOLS_UBUNTU_MIRROR
-The default value for \fB\-\-mirror\fR.
-
-.SH SEE ALSO
-.BR dget (1),
-.BR pull\-debian\-source (1),
-.BR pull\-debian\-debdiff (1),
-.BR ubuntu\-dev\-tools (5)
-
-.SH AUTHOR
-.PP
-\fBpull\-lp\-source\fR and this manual page were written by Iain Lane
-<iain@orangesquash.org.uk>.
-Both are released under the GNU General Public License, version 3 or later.

doc/pull-lp-source.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-lp-udebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-pkg.1

@@ -0,0 +1,147 @@
+.TH PULL\-PKG "1" "28 August 2017" "ubuntu-dev-tools"
+
+.SH NAME
+pull\-pkg \- download a package for Debian, Ubuntu, UCA, or a PPA
+
+.SH SYNOPSIS
+.B pull\-pkg \fR[\fIoptions\fR]\fR <\fIpackage name\fR>
+[\fIrelease\fR|\fIversion\fR]
+
+.SH DESCRIPTION
+\fBpull\-pkg\fR downloads the specified \fIversion\fR of
+<\fIpackage name\fR>, or the latest version from the
+specified \fIrelease\fR.  To request a version from
+a particular pocket say \fIrelease\fB\-\fIpocket\fR (with a magic
+\fB\-release\fR for only the release pocket).  If no \fIpocket\fR is
+specified, all pockets will be searched except -backports.
+If no \fIversion\fR or \fIrelease\fR is specified, the latest version in
+the development release will be downloaded.
+
+There are convenience scripts that set pull type and distribution
+appropriately: these are
+\fBpull\-lp\-source\fR, \fBpull\-lp\-debs\fR, \fBpull\-lp\-ddebs\fR,
+and \fBpull\-lp\-udebs\fR, which all pull Ubuntu packages;
+\fBpull\-debian\-source\fR, \fBpull\-debian\-debs\fR, \fBpull\-debian\-ddebs\fR,
+and \fBpull\-debian\-udebs\fR, which all pull Debian packages;
+\fBpull\-uca\-source\fR, \fBpull\-uca\-debs\fR, \fBpull\-uca\-ddebs\fR,
+and \fBpull\-uca\-udebs\fR, which all pull Ubuntu Cloud Archive packages;
+and \fBpull\-ppa\-source\fR, \fBpull\-ppa\-debs\fR, \fBpull\-ppa\-ddebs\fR,
+and \fBpull\-ppa\-udebs\fR, which all pull from a specified Personal Package
+Archive on Launchpad.  Each script pulls the file type in its name, i.e.
+\fIsource\fR, \fIdebs\fR, \fIddebs\fR, or \fIudebs\fR.
+
+.SH OPTIONS
+Listed below are the command line options for pull\-pkg:
+.TP
+.I package name
+This is name of the package to downloaded.
+You can use either the source package name, or binary package name.
+.TP
+.I version
+This is the version of the package to downloaded.
+.TP
+.I release
+This is the release to downloaded from.
+For debian, you can use either the release name like \fBjessie\fR
+or \fBsid\fR, or you can use the special release names \fBunstable\fR,
+\fBstable\fR, or \fBtesting\fR.
+For ubuntu, you can use either the release name like \fBxenial\fR
+or the release-pocket like \fBxenial-proposed\fR.
+For ubuntu cloud archive (uca) you can use either the uca release
+name like \fBmitaka\fR or the ubuntu and uca release names like
+\fBtrusty-mitaka\fR.  Defaults to the current development release.
+.TP
+.BR \-h ", " \-\-help
+Display a help message and exit.
+.TP
+.BR \-v ", " \-\-verbose
+Be verbose about what is being done.
+.TP
+.BR \-d ", " \-\-download\-only
+Do not extract the source package (applies only to source packages).
+.TP
+.B \-m \fIMIRROR\fR, \fB\-\-mirror\fR=\fIMIRROR\fR
+Use the specified mirror server.
+Should be in the form \fBhttp://archive.ubuntu.com/ubuntu\fR or
+\fBhttp://deb.debian.org/debian\fR.  If not specified or if the
+package is not found on the specified mirror, this will fall
+back to the default mirror(s) and/or mirror(s) from environment
+variables, and then will fall back to Launchpad or Debian Snapshot.
+This can be specified multiple times to try multiple mirrors.
+.TP
+.B \-\-no\-conf
+Do not use mirrors from the default configuration, or from
+any environment variables.
+.TP
+.B \-a \fIARCH\fR, \fB\-\-arch\fR=\fIARCH\fR
+Get binary packages from the \fIARCH\fR architecture.
+Defaults to the local architecture, if it can be deteected.
+.TP
+.B \-p \fIPULL\fR, \fB\-\-pull\fR=\fIPULL\fR
+What to pull: \fBsource\fR, \fBdebs\fR, \fBddebs\fR, \fBudebs\fR,
+or \fBlist\fR.  The \fBlist\fR action only lists all a package's
+source and binary files, but does not actually download any.
+Defaults to \fBsource\fR.
+.TP
+.B \-D \fIDISTRO\fR, \fB\-\-distro\fR=\fIDISTRO\fR
+Pull from: \fBdebian\fR, \fBuca\fR, \fBubuntu\fR, or a \fBppa\fR.
+\fBlp\fR can be used instead of \fBubuntu\fR.
+Any string containing \fBcloud\fR can be used instead of \fBuca\fR.
+If pulling from a ppa, you must specify the PPA.  Defaults to \fBubuntu\fR.
+.TP
+.B \-\-ppa\fR=ppa:\fIUSER/NAME\fR
+Applies only when \fBdistro\fR is \fIppa\fR.  Can be provided either as
+a value to the \fB\-\-ppa\fR option parameter, or as a plain option
+(like \fIrelease\fR or \fIversion\fR).  When specified as a plain option,
+the form must be \fBppa:USER/NAME\fR; when specified as a value to the
+\fB\-\-ppa\fR option parameter, the leading \fBppa:\fR is optional.
+
+.SH ENVIRONMENT
+All of the \fBCONFIGURATION VARIABLES\fR below are also supported as
+environment variables.
+Variables in the environment take precedence to those in configuration
+files.
+
+.SH CONFIGURATION VARIABLES
+The following variables can be set in the environment or in
+.BR ubuntu\-dev\-tools (5)
+configuration files.
+In each case, the script\-specific variable takes precedence over the
+package\-wide variable.
+.TP
+.BR UBUNTUTOOLS_UBUNTU_MIRROR
+The default mirror.
+.TP
+.BR PULL_PKG_UBUNTU_MIRROR
+The default mirror when using the \fBpull\-pkg\fR script.
+.TP
+.BR PULL_[LP|DEBIAN|PPA|UCA]_[SOURCE|DEBS|DDEBS|UDEBS]_MIRROR
+The default mirror when using the associated script.
+
+.SH SEE ALSO
+.BR dget (1),
+.BR pull\-lp\-source (1),
+.BR pull\-lp\-debs (1),
+.BR pull\-lp\-ddebs (1),
+.BR pull\-lp\-udebs (1),
+.BR pull\-debian\-source (1),
+.BR pull\-debian\-debs (1),
+.BR pull\-debian\-ddebs (1),
+.BR pull\-debian\-udebs (1),
+.BR pull\-ppa\-source (1),
+.BR pull\-ppa\-debs (1),
+.BR pull\-ppa\-ddebs (1),
+.BR pull\-ppa\-udebs (1),
+.BR pull\-uca\-source (1),
+.BR pull\-uca\-debs (1),
+.BR pull\-uca\-ddebs (1),
+.BR pull\-uca\-udebs (1),
+.BR pull\-debian\-debdiff (1),
+.BR ubuntu\-dev\-tools (5)
+
+.SH AUTHOR
+.PP
+\fBpull\-pkg\fR was written by Dan Streetman <ddstreet@canonical.com>,
+based on the original \fBpull\-lp\-source\fR; it and this manual page
+were written by Iain Lane <iain@orangesquash.org.uk>.
+All are released under the GNU General Public License, version 3 or later.

doc/pull-ppa-ddebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-ppa-debs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-ppa-source.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-ppa-udebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-revu-source.1

@@ -1,27 +0,0 @@
-.TH PULL\-REVU\-SOURCE "1" "30 August 2009" "ubuntu-dev-tools"
-
-.SH NAME
-pull\-revu\-source \- download a source package from REVU
-
-.SH SYNOPSIS
-.B pull\-revu\-source \fR[\fB\-h\fR]\fB <\fBsource package\fR>
-
-.SH DESCRIPTION
-\fBpull\-revu\-source\fR downloads and extracts the latest version of
-<\fBsource package\fR> from REVU.
-
-.SH OPTIONS
-Listed below are the command line options for pull\-revu\-source:
-.TP
-.B \-h, \-\-help
-Display the usage instructions and exit.
-.TP
-.B <source package>
-This is the source package that you would like to be downloaded from Debian.
-
-.SH AUTHOR
-.PP
-\fBpull\-revu\-source\fR and this manual page were written by Nathan Handler
-<nhandler@ubuntu.com>. \fBpull\-revu\-source\fR is based on \fBrevupull\fR in
-\fBkubuntu\-dev\-tools\fR, written by Harald Sitter <apachelogger@ubuntu.com>.
-Both are released under the GNU General Public License, version 3 or later.

doc/pull-uca-ddebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-uca-debs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-uca-source.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/pull-uca-udebs.1

@@ -0,0 +1 @@
+pull-pkg.1

doc/reverse-build-depends.1

@@ -1,13 +0,0 @@
-.TH REVERSE-BUILD-DEPENDS "1" "June 2012" "ubuntu-dev-tools"
-.SH NAME
-reverse-build-depends \- find packages that depend on a specific package to
-build (reverse build depends)
-.SH SYNOPSIS
-.TP
-.B reverse-build-depends \fR[\fIoptions\fR] \fIpackage
-.SH DESCRIPTION
-\fBreverse-build-depends\fR has been replaced by \fBreverse-depends \-b\fR.
-This script now wraps \fBreverse-depends\fR.
-Please use it in the future.
-.SH SEE ALSO
-.BR reverse-depends (1)

doc/running-autopkgtests.1

@@ -0,0 +1,15 @@
+.TH running\-autopkgtests "1" "18 January 2024" "ubuntu-dev-tools"
+.SH NAME
+running\-autopkgtests \- dumps a list of currently running autopkgtests
+
+.SH SYNOPSIS
+.B running\-autopkgtests
+
+.SH DESCRIPTION
+Dumps a list of currently running and queued tests in Autopkgtest.
+Pass --running to only see running tests, or --queued to only see
+queued tests. Passing both will print both, which is the default behavior.
+
+.SH AUTHOR
+.B running\-autopkgtests
+was written by Chris Peterson <chris.peterson@canonical.com>.

doc/setup-packaging-environment.1

@@ -6,7 +6,13 @@
 \fBsetup-packaging-environment\fR
 
 .SH DESCRIPTION
-\fBsetup-packaging-environment\fR aims to make it more straightforward for new contributors to get their Ubuntu installation ready for packaging work. It ensures that all four components from Ubuntu's official repositories are enabled along with their corresponding source repositories. It also installs a minimal set of packages needed for Ubuntu packaging work (ubuntu-dev-tools, devscripts, debhelper, cdbs, patchutils, pbuilder, and build-essential). Finally, it assists in defining the DEBEMAIL and DEBFULLNAME environment variables.
+\fBsetup-packaging-environment\fR aims to make it more straightforward for new
+contributors to get their Ubuntu installation ready for packaging work. It
+ensures that all four components from Ubuntu's official repositories are enabled
+along with their corresponding source repositories. It also installs a minimal
+set of packages needed for Ubuntu packaging work (ubuntu-dev-tools, devscripts,
+debhelper, patchutils, pbuilder, and build-essential). Finally, it assists
+in defining the DEBEMAIL and DEBFULLNAME environment variables.
 
 .SH AUTHORS
 \fBsetup-packaging-environment\fR was written by Siegfried-A. Gevatter <rainct@ubuntu.com>.

doc/syncpackage.1

@@ -4,11 +4,11 @@ syncpackage \- copy source packages from Debian to Ubuntu
 .\"
 .SH SYNOPSIS
 .B syncpackage
-[\fIoptions\fR] \fI<.dsc URL/path or package name>\fR
+[\fIoptions\fR] \fI<.dsc URL/path or package name(s)>\fR
 .\"
 .SH DESCRIPTION
-\fBsyncpackage\fR causes a source package to be copied from Debian to
-Ubuntu.
+\fBsyncpackage\fR causes one or more source package(s) to be copied from Debian
+to Ubuntu.
 .PP
 \fBsyncpackage\fR allows you to upload files with the same checksums of the
 Debian ones, as the common script used by Ubuntu archive administrators does,
@@ -58,7 +58,7 @@ Display more progress information.
 \fB\-F\fR, \fB\-\-fakesync\fR
 Perform a fakesync, to work around a tarball mismatch between Debian and
 Ubuntu.
-This option ignores blacklisting, and performs a local sync.
+This option ignores blocklisting, and performs a local sync.
 It implies \fB\-\-no\-lp\fR, and will leave a signed \fB.changes\fR file
 for you to upload.
 .TP

doc/ubuntu-build.1

@@ -1,9 +1,14 @@
-.TH UBUNTU-BUILD "1" "June 2010" "ubuntu-dev-tools"
+.TH UBUNTU-BUILD "1" "Mar 2024" "ubuntu-dev-tools"
 .SH NAME
 ubuntu-build \- command-line interface to Launchpad build operations
 
 .SH SYNOPSIS
-.B ubuntu-build <srcpackage> <release> <operation>
+.nf
+\fBubuntu-build\fR <srcpackage> <release> <operation>
+\fBubuntu-build\fR --batch [--retry] [--rescore \fIPRIORITY\fR] [--arch \fIARCH\fR [...]]
+             [--series \fISERIES\fR] [--state \fIBUILD-STATE\fR]
+             [-A \fIARCHIVE\fR] [pkg]...
+.fi
 
 .SH DESCRIPTION
 \fBubuntu-build\fR provides a command line interface to the Launchpad build
@@ -37,8 +42,8 @@ operations.
 .IP
 \fB\-a\fR ARCHITECTURE, \fB\-\-arch\fR=\fIARCHITECTURE\fR
 Rebuild or rescore a specific architecture. Valid
-architectures include: amd64, sparc, powerpc, i386,
-armel, armhf, arm64, ia64, lpia, hppa, ppc64el, s390x.
+architectures are:
+armhf, arm64, amd64, i386, powerpc, ppc64el, riscv64, s390x.
 .TP
 Batch processing:
 .IP
@@ -58,14 +63,16 @@ Retry builds (give\-back).
 \fB\-\-rescore\fR=\fIPRIORITY\fR
 Rescore builds to <priority>.
 .IP
-\fB\-\-arch2\fR=\fIARCHITECTURE\fR
+\fB\-\-arch\fR=\fIARCHITECTURE\fR
 Affect only 'architecture' (can be used several
-times). Valid architectures are: amd64, sparc,
-powerpc, i386, armel, armhf, arm64, ia64, lpia, hppa.
+times). Valid architectures are:
+arm64, amd64, i386, powerpc, ppc64el, riscv64, s390x.
+.IP
+\fB\-A=\fIARCHIVE\fR
+Act on the named archive (ppa) instead of on the main Ubuntu archive.
 
 .SH AUTHORS
 \fBubuntu-build\fR was written by Martin Pitt <martin.pitt@canonical.com>, and
 this manual page was written by Jonathan Patrick Davies <jpds@ubuntu.com>.
 .PP
-Both are released under the terms of the GNU General Public License, version 3
-or (at your option) any later version.
+Both are released under the terms of the GNU General Public License, version 3.

enforced-editing-wrapper

@@ -22,7 +22,10 @@
 # UDT_EDIT_WRAPPER_TEMPLATE_RE: An extra boilerplate-detecting regex.
 # UDT_EDIT_WRAPPER_FILE_DESCRIPTION: The type of file being edited.
 
-import optparse
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+import argparse
 import os
 import re
 
@@ -30,33 +33,30 @@ from ubuntutools.question import EditFile
 
 
 def main():
-    parser = optparse.OptionParser('%prog [options] filename')
-    options, args = parser.parse_args()
+    parser = argparse.ArgumentParser(usage="%(prog)s [options] filename")
+    parser.add_argument("filename", help=argparse.SUPPRESS)
+    args = parser.parse_args()
+    if not os.path.isfile(args.filename):
+        parser.error(f"File {args.filename} does not exist")
 
-    if len(args) != 1:
-        parser.error('A filename must be specified')
-    body = args[0]
-    if not os.path.isfile(body):
-        parser.error('File %s does not exist' % body)
-
-    if 'UDT_EDIT_WRAPPER_EDITOR' in os.environ:
-        os.environ['EDITOR'] = os.environ['UDT_EDIT_WRAPPER_EDITOR']
+    if "UDT_EDIT_WRAPPER_EDITOR" in os.environ:
+        os.environ["EDITOR"] = os.environ["UDT_EDIT_WRAPPER_EDITOR"]
     else:
-        del os.environ['EDITOR']
+        del os.environ["EDITOR"]
 
-    if 'UDT_EDIT_WRAPPER_VISUAL' in os.environ:
-        os.environ['VISUAL'] = os.environ['UDT_EDIT_WRAPPER_VISUAL']
+    if "UDT_EDIT_WRAPPER_VISUAL" in os.environ:
+        os.environ["VISUAL"] = os.environ["UDT_EDIT_WRAPPER_VISUAL"]
     else:
-        del os.environ['VISUAL']
+        del os.environ["VISUAL"]
 
     placeholders = []
-    if 'UDT_EDIT_WRAPPER_TEMPLATE_RE' in os.environ:
-        placeholders.append(re.compile(
-            os.environ['UDT_EDIT_WRAPPER_TEMPLATE_RE']))
+    if "UDT_EDIT_WRAPPER_TEMPLATE_RE" in os.environ:
+        placeholders.append(re.compile(os.environ["UDT_EDIT_WRAPPER_TEMPLATE_RE"]))
 
-    description = os.environ.get('UDT_EDIT_WRAPPER_FILE_DESCRIPTION', 'file')
+    description = os.environ.get("UDT_EDIT_WRAPPER_FILE_DESCRIPTION", "file")
 
-    EditFile(body, description, placeholders).edit()
+    EditFile(args.filename, description, placeholders).edit()
 
-if __name__ == '__main__':
+
+if __name__ == "__main__":
     main()

grep-merges

@@ -19,60 +19,70 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-import optparse
-import sys
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+import argparse
 import json
+import sys
 
 from httplib2 import Http, HttpLib2Error
 
 import ubuntutools.misc
+from ubuntutools import getLogger
+
+Logger = getLogger()
 
 
 def main():
-    parser = optparse.OptionParser(
-        usage='%prog [options] [string]',
-        description='List pending merges from Debian matching string')
-    args = parser.parse_args()[1]
-
-    if len(args) > 1:
-        parser.error('Too many arguments')
-    elif len(args) == 1:
-        match = args[0]
-    else:
-        match = None
+    parser = argparse.ArgumentParser(
+        usage="%(prog)s [options] [string]",
+        description="List pending merges from Debian matching string",
+    )
+    parser.add_argument("string", nargs="?", help=argparse.SUPPRESS)
+    args = parser.parse_args()
 
     ubuntutools.misc.require_utf8()
 
-    for component in ('main', 'main-manual',
-                      'restricted', 'restricted-manual',
-                      'universe', 'universe-manual',
-                      'multiverse', 'multiverse-manual'):
-
-        url = 'https://merges.ubuntu.com/%s.json' % component
+    for component in (
+        "main",
+        "main-manual",
+        "restricted",
+        "restricted-manual",
+        "universe",
+        "universe-manual",
+        "multiverse",
+        "multiverse-manual",
+    ):
+        url = f"https://merges.ubuntu.com/{component}.json"
         try:
             headers, page = Http().request(url)
         except HttpLib2Error as e:
-            print(str(e), file=sys.stderr)
+            Logger.exception(e)
             sys.exit(1)
         if headers.status != 200:
-            print("%s: %s %s" % (url, headers.status, headers.reason),
-                  file=sys.stderr)
+            Logger.error("%s: %s %s", url, headers.status, headers.reason)
             sys.exit(1)
 
         for merge in json.loads(page):
-            package = merge['source_package']
-            author, uploader = '', ''
-            if merge.get('user'):
-                author = merge['user']
-            if merge.get('uploader'):
-                uploader = '(%s)' % merge['uploader']
-            teams = merge.get('teams', [])
+            package = merge["source_package"]
+            author, uploader = "", ""
+            if merge.get("user"):
+                author = merge["user"]
+            if merge.get("uploader"):
+                uploader = f"({merge['uploader']})"
+            teams = merge.get("teams", [])
 
-            pretty_uploader = '{} {}'.format(author, uploader)
-            if (match is None or match in package or match in author
-               or match in uploader or match in teams):
-                print('%s\t%s' % (package, pretty_uploader))
+            pretty_uploader = f"{author} {uploader}"
+            if (
+                args.string is None
+                or args.string in package
+                or args.string in author
+                or args.string in uploader
+                or args.string in teams
+            ):
+                Logger.info("%s\t%s", package, pretty_uploader)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

hugdaylist

@@ -1,140 +0,0 @@
-#!/usr/bin/python3
-# -*- coding: utf-8 -*-
-#
-# Copyright (C) 2007 Canonical Ltd., Daniel Holbach
-# Copyright (C) 2008 Jonathan Patrick Davies <jpds@ubuntu.com>
-#
-# ##################################################################
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; version 3.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# See file /usr/share/common-licenses/GPL-3 for more details.
-#
-# ##################################################################
-#
-#
-# hugdaylist - produces MoinMoin wiki formatted tables based on a Launchpad bug
-#              list.
-#
-# hugdaylist <url>
-# - produces lists like https://wiki.ubuntu.com/UbuntuBugDay/20070912?action=raw
-#
-# hugdaylist -n <howmany> <url>
-# - will only list <howmany> URLs.
-
-import sys
-from optparse import OptionParser
-
-from launchpadlib.launchpad import Launchpad
-
-from ubuntutools.lp.libsupport import translate_web_api
-
-
-def check_args():
-    howmany = -1
-    url = ""
-
-    # Our usage options.
-    usage = "usage: %prog [-n <number>] launchpad-buglist-url"
-    opt_parser = OptionParser(usage)
-
-    # Options - namely just the number of bugs to output.
-    opt_parser.add_option("-n", "--number", type="int",
-                          dest="number", help="Number of entries to output.")
-
-    # Parse arguments.
-    (options, args) = opt_parser.parse_args()
-
-    # Check if we want a number other than the default.
-    howmany = options.number
-
-    # Check that we have an URL.
-    if not args:
-        print("An URL pointing to a Launchpad bug list is required.",
-              file=sys.stderr)
-        opt_parser.print_help()
-        sys.exit(1)
-    else:
-        url = args[0]
-
-    return (howmany, url)
-
-
-def filter_unsolved(task):
-    # TODO: don't use this filter here, only check status and assignee of
-    #   the given task
-    # Filter out special types of bugs:
-    # - https://wiki.ubuntu.com/Bugs/HowToTriage#Special%20types%20of%20bugs
-    # this is expensive, parse name out of self_link instead?
-    subscriptions = set(s.person.name for s in task.bug.subscriptions)
-    if (task.status != "Fix Committed" and
-            (not task.assignee or task.assignee.name in ['motu', 'desktop-bugs']) and
-            'ubuntu-sponsors' not in subscriptions and
-            'ubuntu-archive' not in subscriptions):
-        return True
-    return False
-
-
-def main():
-    (howmany, url) = check_args()
-    if len(url.split("?", 1)) == 2:
-        # search options not supported, because there is no mapping web ui
-        # options <-> API options
-        print("Options in url are not supported, url: %s" % url,
-              file=sys.stderr)
-        sys.exit(1)
-
-    launchpad = None
-    try:
-        launchpad = Launchpad.login_with("ubuntu-dev-tools", 'production')
-    except IOError as error:
-        print(error)
-        sys.exit(1)
-
-    api_url = translate_web_api(url, launchpad)
-    try:
-        product = launchpad.load(api_url)
-    except Exception as error:
-        response = getattr(error, "response", {})
-        if response.get("status", None) == "404":
-            print(("The URL at '%s' does not appear to be a valid url to a "
-                   "product") % url, file=sys.stderr)
-            sys.exit(1)
-        else:
-            raise
-
-    bug_list = [b for b in product.searchTasks() if filter_unsolved(b)]
-
-    if not bug_list:
-        print("Bug list of %s is empty." % url)
-        sys.exit(0)
-    if howmany == -1:
-        howmany = len(bug_list)
-
-    print("""
-## ||<rowbgcolor="#CCFFCC"> This task is done || somebody || ||
-## ||<rowbgcolor="#FFFFCC"> This task is assigned || somebody || <status> ||
-## ||<rowbgcolor="#FFEBBB"> This task isn't || ... || ||
-## ||<rowbgcolor="#FFCCCC"> This task is blocked on something || somebody || <explanation> ||
-
-|| Bug || Subject || Triager ||""")
-
-    for i in list(bug_list)[:howmany]:
-        bug = i.bug
-        print('||<rowbgcolor="#FFEBBB"> [%s %s] || %s || ||'
-              % (bug.web_link, bug.id, bug.title))
-
-
-if __name__ == '__main__':
-    try:
-        main()
-    except KeyboardInterrupt:
-        print("Aborted.", file=sys.stderr)
-        sys.exit(1)

import-bug-from-debian

@@ -21,43 +21,213 @@
 #
 # ##################################################################
 
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
 import argparse
 import logging
 import re
 import sys
 import webbrowser
+from collections.abc import Iterable
+from email.message import EmailMessage
 
+import debianbts
 from launchpadlib.launchpad import Launchpad
 
+from ubuntutools import getLogger
 from ubuntutools.config import UDTConfig
-from ubuntutools.logger import Logger
 
-try:
-    import debianbts
-except ImportError:
-    Logger.error("Please install 'python3-debianbts' in order to use this utility.")
-    sys.exit(1)
+Logger = getLogger()
+ATTACHMENT_MAX_SIZE = 2000
 
 
-def main():
+def parse_args() -> argparse.Namespace:
+    parser = argparse.ArgumentParser()
+    parser.add_argument(
+        "-b",
+        "--browserless",
+        action="store_true",
+        help="Don't open the bug in the browser at the end",
+    )
+    parser.add_argument(
+        "-l",
+        "--lpinstance",
+        metavar="INSTANCE",
+        help="LP instance to connect to (default: production)",
+    )
+    parser.add_argument(
+        "-v", "--verbose", action="store_true", help="Print info about the bug being imported"
+    )
+    parser.add_argument(
+        "-n",
+        "--dry-run",
+        action="store_true",
+        help="Don't actually open a bug (also sets verbose)",
+    )
+    parser.add_argument(
+        "-p", "--package", help="Launchpad package to file bug against (default: Same as Debian)"
+    )
+    parser.add_argument(
+        "--no-conf", action="store_true", help="Don't read config files or environment variables."
+    )
+    parser.add_argument("bugs", nargs="+", help="Bug number(s) or URL(s)")
+    return parser.parse_args()
+
+
+def get_bug_numbers(bug_list: Iterable[str]) -> list[int]:
     bug_re = re.compile(r"bug=(\d+)")
 
-    parser = argparse.ArgumentParser()
-    parser.add_argument("-b", "--browserless", action="store_true",
-                        help="Don't open the bug in the browser at the end")
-    parser.add_argument("-l", "--lpinstance", metavar="INSTANCE",
-                        help="LP instance to connect to (default: production)")
-    parser.add_argument("-v", "--verbose", action="store_true",
-                        help="Print info about the bug being imported")
-    parser.add_argument("-n", "--dry-run", action="store_true",
-                        help="Don't actually open a bug (also sets verbose)")
-    parser.add_argument("-p", "--package",
-                        help="Launchpad package to file bug against "
-                        "(default: Same as Debian)")
-    parser.add_argument("--no-conf", action="store_true",
-                        help="Don't read config files or environment variables.")
-    parser.add_argument("bugs", nargs="+", help="Bug number(s) or URL(s)")
-    options = parser.parse_args()
+    bug_nums = []
+
+    for bug_num in bug_list:
+        if bug_num.startswith("http"):
+            # bug URL
+            match = bug_re.search(bug_num)
+            if match is None:
+                Logger.error("Can't determine bug number from %s", bug_num)
+                sys.exit(1)
+            bug_num = match.groups()[0]
+        bug_num = bug_num.lstrip("#")
+        bug_nums.append(int(bug_num))
+
+    return bug_nums
+
+
+def walk_multipart_message(message: EmailMessage) -> tuple[str, list[tuple[int, EmailMessage]]]:
+    summary = ""
+    attachments = []
+    i = 1
+    for part in message.walk():
+        content_type = part.get_content_type()
+
+        if content_type.startswith("multipart/"):
+            # we're already iterating on multipart items
+            # let's just skip the multipart extra metadata
+            continue
+        if content_type == "application/pgp-signature":
+            # we're not interested in importing pgp signatures
+            continue
+
+        if part.is_attachment():
+            attachments.append((i, part))
+        elif content_type.startswith("image/"):
+            # images here are not attachment, they are inline, but Launchpad can't handle that,
+            # so let's add them as attachments
+            summary += f"Message part #{i}\n"
+            summary += f"[inline image '{part.get_filename()}']\n\n"
+            attachments.append((i, part))
+        elif content_type.startswith("text/html"):
+            summary += f"Message part #{i}\n"
+            summary += "[inline html]\n\n"
+            attachments.append((i, part))
+        elif content_type == "text/plain":
+            summary += f"Message part #{i}\n"
+            summary += part.get_content() + "\n"
+        else:
+            raise RuntimeError(
+                f"""Unknown message part
+Your Debian bug is too weird to be imported in Launchpad, sorry.
+You can fix that by patching this script in ubuntu-dev-tools.
+Faulty message part:
+{part}"""
+            )
+        i += 1
+
+    return summary, attachments
+
+
+def process_bugs(
+    bugs: Iterable[debianbts.Bugreport],
+    launchpad: Launchpad,
+    package: str,
+    dry_run: bool = True,
+    browserless: bool = False,
+) -> bool:
+    debian = launchpad.distributions["debian"]
+    ubuntu = launchpad.distributions["ubuntu"]
+    lp_debbugs = launchpad.bug_trackers.getByName(name="debbugs")
+
+    err = False
+    for bug in bugs:
+        ubupackage = bug.source
+        if package:
+            ubupackage = package
+        bug_num = bug.bug_num
+        subject = bug.subject
+        log = debianbts.get_bug_log(bug_num)
+        message = log[0]["message"]
+        assert isinstance(message, EmailMessage)
+        attachments: list[tuple[int, EmailMessage]] = []
+        if message.is_multipart():
+            summary, attachments = walk_multipart_message(message)
+        else:
+            summary = str(message.get_payload())
+
+        target = ubuntu.getSourcePackage(name=ubupackage)
+        if target is None:
+            Logger.error(
+                "Source package '%s' is not in Ubuntu. Please specify "
+                "the destination source package with --package",
+                ubupackage,
+            )
+            err = True
+            continue
+
+        description = f"Imported from Debian bug http://bugs.debian.org/{bug_num}:\n\n{summary}"
+        # LP limits descriptions to 50K chars
+        description = (description[:49994] + " [...]") if len(description) > 50000 else description
+
+        Logger.debug("Target: %s", target)
+        Logger.debug("Subject: %s", subject)
+        Logger.debug("Description: ")
+        Logger.debug(description)
+        for i, attachment in attachments:
+            Logger.debug("Attachment #%s (%s)", i, attachment.get_filename() or "inline")
+            Logger.debug("Content:")
+            if attachment.get_content_type() == "text/plain":
+                content = attachment.get_content()
+                if len(content) > ATTACHMENT_MAX_SIZE:
+                    content = (
+                        content[:ATTACHMENT_MAX_SIZE]
+                        + f" [attachment cropped after {ATTACHMENT_MAX_SIZE} characters...]"
+                    )
+                Logger.debug(content)
+            else:
+                Logger.debug("[data]")
+
+        if dry_run:
+            Logger.info("Dry-Run: not creating Ubuntu bug.")
+            continue
+
+        u_bug = launchpad.bugs.createBug(target=target, title=subject, description=description)
+        for i, attachment in attachments:
+            name = f"#{i}-{attachment.get_filename() or "inline"}"
+            content = attachment.get_content()
+            if isinstance(content, str):
+                # Launchpad only wants bytes
+                content = content.encode()
+            u_bug.addAttachment(
+                filename=name,
+                data=content,
+                comment=f"Imported from Debian bug http://bugs.debian.org/{bug_num}",
+            )
+        d_sp = debian.getSourcePackage(name=package)
+        if d_sp is None and package:
+            d_sp = debian.getSourcePackage(name=package)
+        d_task = u_bug.addTask(target=d_sp)
+        d_watch = u_bug.addWatch(remote_bug=bug_num, bug_tracker=lp_debbugs)
+        d_task.bug_watch = d_watch
+        d_task.lp_save()
+        Logger.info("Opened %s", u_bug.web_link)
+        if not browserless:
+            webbrowser.open(u_bug.web_link)
+
+    return err
+
+
+def main() -> None:
+    options = parse_args()
 
     config = UDTConfig(options.no_conf)
     if options.lpinstance is None:
@@ -72,75 +242,15 @@ def main():
     if options.verbose:
         Logger.setLevel(logging.DEBUG)
 
-    debian = launchpad.distributions['debian']
-    ubuntu = launchpad.distributions['ubuntu']
-    lp_debbugs = launchpad.bug_trackers.getByName(name='debbugs')
-
-    bug_nums = []
-
-    for bug_num in options.bugs:
-        if bug_num.startswith("http"):
-            # bug URL
-            match = bug_re.search(bug_num)
-            if match is None:
-                Logger.error("Can't determine bug number from %s", bug_num)
-                sys.exit(1)
-            bug_num = match.groups()[0]
-        bug_num = bug_num.lstrip("#")
-        bug_num = int(bug_num)
-        bug_nums.append(bug_num)
-
-    bugs = debianbts.get_status(*bug_nums)
+    bugs = debianbts.get_status(get_bug_numbers(options.bugs))
 
     if not bugs:
         Logger.error("Cannot find any of the listed bugs")
         sys.exit(1)
 
-    err = False
-    for bug in bugs:
-        ubupackage = package = bug.source
-        if options.package:
-            ubupackage = options.package
-        bug_num = bug.bug_num
-        subject = bug.subject
-        log = debianbts.get_bug_log(bug_num)
-        summary = log[0]['message'].get_payload()
-        target = ubuntu.getSourcePackage(name=ubupackage)
-        if target is None:
-            Logger.error("Source package '%s' is not in Ubuntu. Please specify "
-                         "the destination source package with --package",
-                         ubupackage)
-            err = True
-            continue
-
-        description = ('Imported from Debian bug http://bugs.debian.org/%d:\n\n%s' %
-                       (bug_num, summary))
-
-        Logger.debug('Target: %s' % target)
-        Logger.debug('Subject: %s' % subject)
-        Logger.debug('Description: ')
-        Logger.debug(description)
-
-        if options.dry_run:
-            Logger.info('Dry-Run: not creating Ubuntu bug.')
-            continue
-
-        u_bug = launchpad.bugs.createBug(target=target, title=subject,
-                                         description=description)
-        d_sp = debian.getSourcePackage(name=package)
-        if d_sp is None and options.package:
-            d_sp = debian.getSourcePackage(name=options.package)
-        d_task = u_bug.addTask(target=d_sp)
-        d_watch = u_bug.addWatch(remote_bug=bug_num, bug_tracker=lp_debbugs)
-        d_task.bug_watch = d_watch
-        d_task.lp_save()
-        Logger.normal("Opened %s", u_bug.web_link)
-        if not options.browserless:
-            webbrowser.open(u_bug.web_link)
-
-    if err:
+    if process_bugs(bugs, launchpad, options.package, options.dry_run, options.browserless):
         sys.exit(1)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

lp-bitesize

@@ -0,0 +1,105 @@
+#!/usr/bin/python3
+"""Add 'bitesize' tag to bugs and add a comment."""
+
+# Copyright (c) 2011 Canonical Ltd.
+#
+# bitesize is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 3, or (at your option) any
+# later version.
+#
+# bitesize is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with bitesize; see the file COPYING.  If not, write to the Free
+# Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# Authors:
+#  Daniel Holbach <daniel.holbach@canonical.com>
+
+import argparse
+import sys
+
+from launchpadlib.errors import HTTPError
+from launchpadlib.launchpad import Launchpad
+
+from ubuntutools import getLogger
+from ubuntutools.config import UDTConfig
+
+Logger = getLogger()
+
+
+def error_out(msg, *args):
+    Logger.error(msg, *args)
+    sys.exit(1)
+
+
+def save_entry(entry):
+    try:
+        entry.lp_save()
+    except HTTPError as error:
+        error_out("%s", error.content)
+
+
+def tag_bug(bug):
+    bug.tags = bug.tags + ["bitesize"]  # LP: #254901 workaround
+    save_entry(bug)
+
+
+def main():
+    parser = argparse.ArgumentParser(usage="%(prog)s [options] <bug number>")
+    parser.add_argument(
+        "-l",
+        "--lpinstance",
+        metavar="INSTANCE",
+        help="Launchpad instance to connect to (default: production)",
+        dest="lpinstance",
+        default=None,
+    )
+    parser.add_argument(
+        "--no-conf",
+        help="Don't read config files or environment variables.",
+        dest="no_conf",
+        default=False,
+        action="store_true",
+    )
+    parser.add_argument("bug_number", help=argparse.SUPPRESS)
+    args = parser.parse_args()
+    config = UDTConfig(args.no_conf)
+    if args.lpinstance is None:
+        args.lpinstance = config.get_value("LPINSTANCE")
+
+    launchpad = Launchpad.login_with("ubuntu-dev-tools", args.lpinstance)
+    if launchpad is None:
+        error_out("Couldn't authenticate to Launchpad.")
+
+    # check that the new main bug isn't a duplicate
+    try:
+        bug = launchpad.bugs[args.bug_number]
+    except HTTPError as error:
+        if error.response.status == 401:
+            error_out(
+                "Don't have enough permissions to access bug %s. %s",
+                args.bug_number,
+                error.content,
+            )
+        else:
+            raise
+    if "bitesize" in bug.tags:
+        error_out("Bug is already marked as 'bitesize'.")
+    bug.newMessage(
+        content="I'm marking this bug as 'bitesize' as it looks "
+        "like an issue that is easy to fix and suitable "
+        "for newcomers in Ubuntu development. If you need "
+        "any help with fixing it, talk to me about it."
+    )
+    bug.subscribe(person=launchpad.me)
+    tag_bug(launchpad.bugs[bug.id])  # fresh bug object, LP: #336866 workaround
+
+
+if __name__ == "__main__":
+    main()

merge-changelog

@@ -18,90 +18,67 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-import re
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
 import sys
 
-from debian.debian_support import Version
+from debian.changelog import Changelog
+
+from ubuntutools import getLogger
+
+Logger = getLogger()
 
 
 def usage(exit_code=1):
-    print('''Usage: merge-changelog <left changelog> <right changelog>
+    Logger.info(
+        """Usage: merge-changelog <left changelog> <right changelog>
 
 merge-changelog takes two changelogs that once shared a common source,
 merges them back together, and prints the merged result to stdout.  This
 is useful if you need to manually merge a ubuntu package with a new
 Debian release of the package.
-''')
+"""
+    )
     sys.exit(exit_code)
 
+
 ########################################################################
 # Changelog Management
 ########################################################################
 
 
-# Regular expression for top of debian/changelog
-CL_RE = re.compile(r'^(\w[-+0-9a-z.]*) \(([^\(\) \t]+)\)((\s+[-0-9a-z]+)+)\;',
-                   re.IGNORECASE)
-
-
 def merge_changelog(left_changelog, right_changelog):
     """Merge a changelog file."""
 
-    left_cl = read_changelog(left_changelog)
-    right_cl = read_changelog(right_changelog)
+    with open(left_changelog, encoding="utf-8") as f:
+        left_cl = Changelog(f)
+    with open(right_changelog, encoding="utf-8") as f:
+        right_cl = Changelog(f)
 
-    for right_ver, right_text in right_cl:
-        while len(left_cl) and left_cl[0][0] > right_ver:
-            (left_ver, left_text) = left_cl.pop(0)
-            print(left_text)
+    left_versions = set(left_cl.versions)
+    right_versions = set(right_cl.versions)
+    left_blocks = iter(left_cl)
+    right_blocks = iter(right_cl)
 
-        while len(left_cl) and left_cl[0][0] == right_ver:
-            (left_ver, left_text) = left_cl.pop(0)
+    clist = sorted(left_versions | right_versions, reverse=True)
+    remaining = len(clist)
+    for version in clist:
+        remaining -= 1
+        if version in left_versions:
+            block = next(left_blocks)
+            if version in right_versions:
+                next(right_blocks)
+        else:
+            block = next(right_blocks)
 
-        print(right_text)
+        assert block.version == version
 
-    for _, left_text in left_cl:
-        print(left_text)
-
-    return False
-
-
-def read_changelog(filename):
-    """Return a parsed changelog file."""
-    entries = []
-
-    changelog_file = open(filename)
-    try:
-        (ver, text) = (None, "")
-        for line in changelog_file:
-            match = CL_RE.search(line)
-            if match:
-                try:
-                    ver = Version(match.group(2))
-                except ValueError:
-                    ver = None
-
-                text += line
-            elif line.startswith(" -- "):
-                if ver is None:
-                    ver = Version("0")
-
-                text += line
-                entries.append((ver, text))
-                (ver, text) = (None, "")
-            elif len(line.strip()) or ver is not None:
-                text += line
-    finally:
-        changelog_file.close()
-
-    if len(text):
-        entries.append((ver, text))
-
-    return entries
+        Logger.info("%s%s", str(block).strip(), "\n" if remaining else "")
 
 
 def main():
-    if len(sys.argv) > 1 and sys.argv[1] in ('-h', '--help'):
+    if len(sys.argv) > 1 and sys.argv[1] in ("-h", "--help"):
         usage(0)
     if len(sys.argv) != 3:
         usage(1)
@@ -113,5 +90,5 @@ def main():
     sys.exit(0)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

mk-sbuild

@@ -26,7 +26,7 @@
 # ##################################################################
 #
 # This script creates chroots designed to be used in a snapshot mode
-# (with LVM, btrfs, overlay, overlay or aufs) with schroot and sbuild.
+# (with LVM, btrfs, zfs, overlay, overlay or aufs) with schroot and sbuild.
 # Much love to "man sbuild-setup", https://wiki.ubuntu.com/PbuilderHowto,
 # and https://help.ubuntu.com/community/SbuildLVMHowto.
 #
@@ -40,15 +40,18 @@ SOURCE_CHROOTS_DIR="/var/lib/schroot/chroots"
 SOURCE_CHROOTS_TGZ="/var/lib/schroot/tarballs"
 CHROOT_SNAPSHOT_DIR="/var/lib/schroot/snapshots"
 SCHROOT_PROFILE="sbuild"
+CCACHE_DIR="/var/cache/ccache-sbuild"
+CCACHE_SIZE="4G"
 
 function usage()
 {
-    echo "Usage: $0 [OPTIONS] Release" >&2
+    echo "Usage: $0 [OPTIONS] Release"
     echo "Options:"
     echo "  --arch=ARCH                What architecture to select"
     echo "  --name=NAME                Base name for the schroot (arch is appended)"
     echo "  --personality=PERSONALITY  What personality to use (defaults to match --arch)"
     echo "  --vg=VG                    use LVM snapshots, with group VG"
+    echo "  --zfs-dataset=DATASET      use ZFS snapshots, with parent dataset DATASET"
     echo "  --debug                    Turn on script debugging"
     echo "  --skip-updates             Do not include -updates pocket in sources.list"
     echo "  --skip-security            Do not include -security pocket in sources.list"
@@ -62,14 +65,21 @@ function usage()
     echo "  --debootstrap-keyring=KEYRING"
     echo "                             Use KEYRING to check signatures of retrieved Release files"
     echo "  --debootstrap-no-check-gpg Disables checking gpg signatures of retrieved Release files"
-    echo "  --eatmydata                Install and use eatmydata"
+    echo "  --skip-eatmydata           Don't install and use eatmydata"
+    echo "  --eatmydata                Install and use eatmydata (default)"
+    echo "  --ccache                   Install configure and use ccache as default"
+    echo "  --ccache-dir=PATH          Sets the CCACHE_DIR to PATH"
+    echo "                                 (can be shared between all schroots, defaults to ${CCACHE_DIR})"
+    echo "  --ccache-size=SIZE         Sets the ccache max-size to SIZE"
+    echo "                                 (shared by each CCACHE_DIR, defaults to ${CCACHE_SIZE})"
     echo "  --distro=DISTRO            Install specific distro:"
     echo "                                 'ubuntu' or 'debian' "
     echo "                                 (defaults to determining from release name)"
     echo "  --target=ARCH              Target architecture for cross-building"
     echo "  --type=SCHROOT_TYPE        Define the schroot type:"
-    echo "                                 'directory'(default), 'file', or 'btrfs-snapshot'"
+    echo "                                 'directory' (default), 'file', or 'btrfs-snapshot'."
     echo "                                 'lvm-snapshot' is selected via --vg"
+    echo "                                 'zfs-snapshot' is selected via --zfs-dataset"
     echo ""
     echo "Configuration (via ~/.mk-sbuild.rc)"
     echo "  LV_SIZE                    Size of source LVs (default ${LV_SIZE})"
@@ -89,7 +99,12 @@ function usage()
     echo "  DEBOOTSTRAP_PROXY          Apt proxy (same as --debootstrap-proxy)"
     echo "  DEBOOTSTRAP_KEYRING        GPG keyring (same as --debootstrap-keyring)"
     echo "  DEBOOTSTRAP_NO_CHECK_GPG   Disable GPG verification (same as --debootstrap-no-check-gpg)"
-    echo "  EATMYDATA                  Enable --eatmydata"
+    echo "  EATMYDATA                  Enable or disable eatmydata usage, see --eatmydata and --skip-eatmydata"
+    echo "  CCACHE                     Enable --ccache"
+    echo "  CCACHE_DIR                 Path for ccache (can be shared between all schroots, "
+    echo "                                 same as --ccache-dir, default ${CCACHE_DIR})"
+    echo "  CCACHE_SIZE                Sets the ccache max-size (shared by each CCACHE_DIR, "
+    echo "                                 same as --ccache-size, default ${CCACHE_SIZE})"
     echo "  TEMPLATE_SOURCES           A template for sources.list"
     echo "  TEMPLATE_SCHROOTCONF       A template for schroot.conf stanza"
     if [ -z "$1" ]; then
@@ -102,26 +117,57 @@ function usage()
 if [ -z "$1" ]; then
     usage
 fi
-OPTS=`getopt -o 'h' --long "help,debug,skip-updates,skip-security,skip-proposed,eatmydata,arch:,name:,source-template:,debootstrap-mirror:,debootstrap-include:,debootstrap-exclude:,debootstrap-opts:,debootstrap-proxy:,debootstrap-no-check-gpg,debootstrap-keyring:,personality:,distro:,vg:,type:,target:" -- "$@"`
+supported_options=(
+    help
+    debug
+    skip-updates
+    skip-security
+    skip-proposed
+    skip-eatmydata
+    ccache
+    arch:
+    name:
+    source-template:
+    debootstrap-mirror:
+    debootstrap-include:
+    debootstrap-exclude:
+    debootstrap-opts:
+    debootstrap-proxy:
+    debootstrap-no-check-gpg
+    debootstrap-keyring:
+    personality:
+    distro:
+    vg:
+    zfs-dataset:
+    type:
+    target:
+    ccache-dir:
+    ccache-size:
+)
+OPTS=$(getopt -o 'h' --long "$(IFS=, && echo "${supported_options[*]}")" -- "$@")
 eval set -- "$OPTS"
 
 VG=""
 DISTRO=""
+COMMAND_PREFIX=""
 name=""
 proxy="_unset_"
 DEBOOTSTRAP_NO_CHECK_GPG=0
-EATMYDATA=0
+EATMYDATA=1
+CCACHE=0
+USE_PKGBINARYMANGLER=0
 
 while :; do
     case "$1" in
         --debug)
+            DEBUG=1
             set -x
             shift
             ;;
         --arch)
             CHROOT_ARCH="$2"
             case $2 in
-                armel|armhf|i386|lpia)
+                armhf|i386)
                     if [ -z "$personality" ]; then
                         personality="linux32"
                     fi
@@ -186,8 +232,12 @@ while :; do
             DEBOOTSTRAP_NO_CHECK_GPG=1
             shift
             ;;
-        --eatmydata)
-            EATMYDATA=1
+        --skip-eatmydata)
+            EATMYDATA=0
+            shift
+            ;;
+        --ccache)
+            CCACHE=1
             shift
             ;;
         --distro)
@@ -198,6 +248,10 @@ while :; do
             VG="$2"
             shift 2
             ;;
+        --zfs-dataset)
+            ZFS_PARENT_DATASET="$2"
+            shift 2
+            ;;
         --type)
             SCHROOT_TYPE="$2"
             shift 2
@@ -206,6 +260,14 @@ while :; do
             TARGET_ARCH="$2"
             shift 2
             ;;
+        --ccache-dir)
+            CCACHE_DIR="$2"
+            shift 2
+            ;;
+        --ccache-size)
+            CCACHE_SIZE="$2"
+            shift 2
+            ;;
         --)
             shift
             break
@@ -242,10 +304,26 @@ if [ ! -w /var/lib/sbuild ]; then
     # Prepare a usable default .sbuildrc
     if [ ! -e ~/.sbuildrc ]; then
         cat > ~/.sbuildrc <<EOM
-# *** VERIFY AND UPDATE \$mailto and \$maintainer_name BELOW ***
+# *** THIS COMMAND IS DEPRECATED ***
+#
+# In sbuild 0.87.0 and later, the unshare backend is available. This is
+# expected to become the default in a future release.
+#
+# This is the new preferred way of building Debian packages, making the manual
+# creation of schroots no longer necessary. To retain the default behavior,
+# you may remove this comment block and continue.
+#
+# To test the unshare backend while retaining the default settings, run sbuild
+# with --chroot-mode=unshare like this:
+# $ sbuild --chroot-mode=unshare --dist=unstable hello
+#
+# To switch to the unshare backend by default (recommended), uncomment the
+# following lines and delete the rest of the file (with the exception of the
+# last two lines):
+#\$chroot_mode = 'unshare';
+#\$unshare_mmdebstrap_keep_tarball = 1;
 
-# Mail address where logs are sent to (mandatory, no default!)
-\$mailto = '$USER';
+# *** VERIFY AND UPDATE \$mailto and \$maintainer_name BELOW ***
 
 # Name to use as override in .changes files for the Maintainer: field
 #\$maintainer_name='$USER <$USER@localhost>';
@@ -333,29 +411,46 @@ elif [ -z "$DISTRO" ]; then
     exit 1
 fi
 
-if [ "$DISTRO" = "ubuntu" ]; then
-    ubuntu_dist_ge() {
-      local releases="$(ubuntu-distro-info --all)"
-      local left=999
-      local right=0
-      local seq=1
-      for i in $releases; do
+# By default DEBOOTSTRAP_SCRIPT must match RELEASE
+DEBOOTSTRAP_SCRIPT="$RELEASE"
+
+dist_ge() {
+    local releases="$($3-distro-info --all)"
+    local left=999
+    local right=0
+    local seq=1
+
+    for i in $releases; do
         if [ $1 = $i ]; then
-          local left=$seq
-          break
+            local left=$seq
+            break
         fi
         seq=$((seq+1))
-      done
-      seq=1
-      for i in $releases; do
+    done
+
+    seq=1
+    for i in $releases; do
         if [ $2 = $i ]; then
-          local right=$seq
-          break
+            local right=$seq
+            break
         fi
         seq=$((seq+1))
-      done
-      [ $left -ge $right ] && return 0 || return 1
-    }
+    done
+
+    [ $left -ge $right ] && return 0 || return 1
+}
+
+ubuntu_dist_ge () {
+    dist_ge $1 $2 ubuntu
+}
+
+debian_dist_ge () {
+    dist_ge $1 $2 debian
+}
+
+if [ "$DISTRO" = "ubuntu" ]; then
+    # On Ubuntu, set DEBOOTSTRAP_SCRIPT to gutsy to allow building new RELEASES without new debootstrap
+    DEBOOTSTRAP_SCRIPT=gutsy
 fi
 
 # By default, name the schroot the same as the release
@@ -402,10 +497,58 @@ if [ $EATMYDATA -eq 1 ]; then
     esac
 fi
 
+if [ $CCACHE -eq 1 ]; then
+    if [ -z "$CCACHE_DIR" ] || [[ "$(dirname "$CCACHE_DIR")" == '/' ]]; then
+        echo "Invalid ccache dir: ${CCACHE_DIR}" >&2
+        exit 1
+    fi
+
+    # We can safely use a global cache path, in such case changing size applies
+    # to all the schroots
+    setup_script="$CCACHE_DIR"/mk-sbuild-setup
+    if [ -d "$CCACHE_DIR" ]; then
+        echo "Reusing $CCACHE_DIR as CCACHE_DIR, will be configured to use max-size=${CCACHE_SIZE}"
+        rm -f "$setup_script"
+    else
+        echo "Configuring $CCACHE_DIR as CCACHE_DIR with max-size=${CCACHE_SIZE}"
+        sudo install --group=sbuild --mode=2775 -d "$CCACHE_DIR"
+    fi
+
+    if [ ! -x "$setup_script" ]; then
+        cat <<END | sudo tee "$setup_script" 1>/dev/null
+#!/bin/sh
+export CCACHE_DIR="$CCACHE_DIR"
+export CCACHE_MAXSIZE="${CCACHE_SIZE}"
+export CCACHE_UMASK=002
+export CCACHE_COMPRESS=1
+unset CCACHE_HARDLINK
+export CCACHE_NOHARDLINK=1
+export PATH="/usr/lib/ccache:\$PATH"
+exec "\$@"
+END
+        sudo chmod a+rx "$setup_script"
+    fi
+
+    if ! sudo grep -qs "$CCACHE_DIR" /etc/schroot/sbuild/fstab; then
+        # This acts on host configuration, but there is no other way to handle
+        # this, however it won't affect anything
+        cat <<END | sudo tee -a /etc/schroot/sbuild/fstab 1>/dev/null
+${CCACHE_DIR} ${CCACHE_DIR} none rw,bind 0 0
+END
+    fi
+
+    DEBOOTSTRAP_INCLUDE="${DEBOOTSTRAP_INCLUDE:+$DEBOOTSTRAP_INCLUDE,}ccache"
+    BUILD_PKGS="$BUILD_PKGS ccache"
+    COMMAND_PREFIX="${COMMAND_PREFIX:+$COMMAND_PREFIX,}$setup_script"
+fi
+
 if [ -z "$SCHROOT_TYPE" ]; then
     # To build the LV, we need to know which volume group to use
     if [ -n "$VG" ]; then
         SCHROOT_TYPE="lvm-snapshot"
+    # To build the ZFS dataset, we need to know which parent to use
+    elif [ -n "$ZFS_PARENT_DATASET" ]; then
+        SCHROOT_TYPE="zfs-snapshot"
     else
         SCHROOT_TYPE="directory"
     fi
@@ -452,7 +595,7 @@ case "$SCHROOT_TYPE" in
     # Set up some variables for use in the paths and names
     CHROOT_PATH="${SOURCE_CHROOTS_TGZ}/${CHROOT_NAME}.tgz"
     ;;
-"btrfs-snapshot")
+"btrfs-snapshot" | "zfs-snapshot")
     if [ ! -d "${SOURCE_CHROOTS_DIR}" ]; then
         sudo mkdir -p "${SOURCE_CHROOTS_DIR}"
     fi
@@ -469,8 +612,8 @@ esac
 
 # Is the specified release known to debootstrap?
 variant_opt="--variant=buildd"
-if [ ! -r "/usr/share/debootstrap/scripts/$RELEASE" ]; then
-    echo "Specified release ($RELEASE) not known to debootstrap" >&2
+if [ ! -r "/usr/share/debootstrap/scripts/$DEBOOTSTRAP_SCRIPT" ]; then
+    echo "Specified release ($DEBOOTSTRAP_SCRIPT) not known to debootstrap" >&2
     exit 1
 fi
 
@@ -525,6 +668,7 @@ ubuntu)
     if ubuntu_dist_ge "$RELEASE" "edgy"; then
         # Add pkgbinarymangler (edgy and later)
         BUILD_PKGS="$BUILD_PKGS pkgbinarymangler"
+        USE_PKGBINARYMANGLER=1
         # Disable recommends for a smaller chroot (gutsy and later only)
         if ubuntu_dist_ge "$RELEASE" "gutsy"; then
             BUILD_PKGS="--no-install-recommends $BUILD_PKGS"
@@ -541,7 +685,7 @@ debian)
         DEBOOTSTRAP_MIRROR="http://deb.debian.org/debian"
     fi
     if [ -z "$COMPONENTS" ]; then
-        COMPONENTS="main non-free contrib"
+        COMPONENTS="main non-free non-free-firmware contrib"
     fi
     if [ -z "$SOURCES_PROPOSED_SUITE" ]; then
         SOURCES_PROPOSED_SUITE="RELEASE-proposed-updates"
@@ -549,7 +693,11 @@ debian)
     # Debian only performs security updates
     SKIP_UPDATES=1
     if [ -z "$SOURCES_SECURITY_SUITE" ]; then
-        SOURCES_SECURITY_SUITE="RELEASE/updates"
+        if debian_dist_ge "$RELEASE" "bullseye"; then
+            SOURCES_SECURITY_SUITE="RELEASE-security"
+        else
+            SOURCES_SECURITY_SUITE="RELEASE/updates"
+        fi
     fi
     if [ -z "$SOURCES_SECURITY_URL" ]; then
         SOURCES_SECURITY_URL="http://security.debian.org/"
@@ -582,7 +730,7 @@ if [ -n "$TARGET_ARCH" ]; then
         echo "Unknown target architecture $TARGET_ARCH" >&2
         exit 1
     fi
-    BUILD_PKGS="$BUILD_PKGS g++-$target_tuple pkg-config-$target_tuple dpkg-cross libc-dev:$TARGET_ARCH"
+    BUILD_PKGS="$BUILD_PKGS g++-$target_tuple pkg-config dpkg-cross libc-dev:$TARGET_ARCH"
 fi
 
 debootstrap_opts="--components=$(echo $COMPONENTS | tr ' ' ,)"
@@ -620,12 +768,12 @@ DEBOOTSTRAP_COMMAND=debootstrap
 if [ "$CHROOT_ARCH" != "$HOST_ARCH" ] ; then
     case "$CHROOT_ARCH-$HOST_ARCH" in
     # Sometimes we don't need qemu
-    amd64-i386|amd64-lpia|armel-armhf|armhf-armel|arm64-armel|arm64-armhf|armel-arm64|armhf-arm64|i386-amd64|i386-lpia|lpia-i386|powerpc-ppc64|ppc64-powerpc|sparc-sparc64|sparc64-sparc)
+    amd64-i386|arm64-armhf|armhf-arm64|i386-amd64|powerpc-ppc64|ppc64-powerpc)
         ;;
     # Sometimes we do
     *)
-        DEBOOTSTRAP_COMMAND=qemu-debootstrap
-        if ! which "$DEBOOTSTRAP_COMMAND"; then
+        DEBOOTSTRAP_COMMAND=debootstrap
+        if ! which "qemu-x86_64-static"; then
             sudo apt-get install qemu-user-static
         fi
         ;;
@@ -658,6 +806,19 @@ case "$SCHROOT_TYPE" in
     fi
     sudo btrfs subvolume create "${MNT}"
     ;;
+
+"zfs-snapshot")
+    ZFS_DATASET="${ZFS_PARENT_DATASET}/${CHROOT_NAME}"
+    if sudo zfs list "${ZFS_DATASET}" >/dev/null 2>&1; then
+        echo "E: ZFS dataset ${ZFS_DATASET} already exists; aborting" >&2
+        exit 1
+    fi
+    sudo zfs create -p -o mountpoint=legacy "${ZFS_DATASET}"
+
+    # Mount
+    MNT=`mktemp -d -t schroot-XXXXXX`
+    sudo mount -t zfs "${ZFS_DATASET}" "${MNT}"
+    ;;
 "file")
     MNT=`mktemp -d -t schroot-XXXXXX`
 esac
@@ -679,7 +840,14 @@ esac
 sudo mkdir -p -m 0700 "$MNT"/root/.gnupg
 
 # debootstrap the chroot
-sudo ${proxy:+"http_proxy=${proxy}"} "$DEBOOTSTRAP_COMMAND" --arch="$CHROOT_ARCH" $variant_opt $debootstrap_opts "$RELEASE" "$MNT" "${DEBOOTSTRAP_MIRROR:-http://archive.ubuntu.com/ubuntu}"
+sudo ${proxy:+"http_proxy=${proxy}"} "$DEBOOTSTRAP_COMMAND" --arch="$CHROOT_ARCH" $variant_opt $debootstrap_opts "$RELEASE" "$MNT" "${DEBOOTSTRAP_MIRROR:-http://archive.ubuntu.com/ubuntu}" "$DEBOOTSTRAP_SCRIPT"
+
+if [ $EATMYDATA -eq 1 ]; then
+    sudo mkdir -p "${MNT}/usr/local/libexec/mk-sbuild"
+    sudo ln -s /usr/bin/eatmydata "${MNT}/usr/local/libexec/mk-sbuild/dpkg"
+    echo 'Dir::Bin::dpkg "/usr/local/libexec/mk-sbuild/dpkg";' \
+        | sudo tee "${MNT}/etc/apt/apt.conf.d/00mk-sbuild-eatmydata" > /dev/null
+fi
 
 # Update the package sources
 TEMP_SOURCES=`mktemp -t sources-XXXXXX`
@@ -724,6 +892,13 @@ EOM
         fi
     fi
     if [ -z "$SKIP_PROPOSED" ]; then
+	TEMP_PREFERENCES=`mktemp -t preferences-XXXXXX`
+        cat >> "$TEMP_PREFERENCES" <<EOM
+# override for NotAutomatic: yes
+Package: *
+Pin: release a=*-proposed
+Pin-Priority: 500
+EOM
         cat >> "$TEMP_SOURCES" <<EOM
 deb ${MIRROR_ARCHS}${DEBOOTSTRAP_MIRROR} $SOURCES_PROPOSED_SUITE ${COMPONENTS}
 deb-src ${DEBOOTSTRAP_MIRROR} $SOURCES_PROPOSED_SUITE ${COMPONENTS}
@@ -749,9 +924,12 @@ fi
 cat "$TEMP_SOURCES" | sed -e "s|RELEASE|$RELEASE|g" | \
     sudo bash -c "cat > $MNT/etc/apt/sources.list"
 rm -f "$TEMP_SOURCES"
+if [ -n "$TEMP_PREFERENCES" ]; then
+    sudo mv "$TEMP_PREFERENCES" $MNT/etc/apt/preferences.d/proposed.pref
+fi
 
-# Copy the timezone (comment this out if you want to leave the chroot at UTC)
-sudo cp -P --remove-destination /etc/localtime /etc/timezone "$MNT"/etc/
+# Copy the timezone (uncomment this if you want to use your local time zone)
+#sudo cp -P --remove-destination /etc/localtime /etc/timezone "$MNT"/etc/
 # Create a schroot entry for this chroot
 TEMP_SCHROOTCONF=`mktemp -t schrootconf-XXXXXX`
 TEMPLATE_SCHROOTCONF=~/.mk-sbuild.schroot.conf
@@ -778,9 +956,9 @@ root-groups=$ADMIN_GROUPS
 type=SCHROOT_TYPE
 profile=$SCHROOT_PROFILE
 EOM
-    if [ $EATMYDATA -eq 1 ]; then
+    if [ -n "$COMMAND_PREFIX" ]; then
     cat >> "$TEMP_SCHROOTCONF" <<EOM
-command-prefix=eatmydata
+command-prefix=${COMMAND_PREFIX}
 EOM
     fi
     case "$SCHROOT_TYPE" in
@@ -803,6 +981,12 @@ btrfs-source-subvolume=CHROOT_PATH
 btrfs-snapshot-directory=CHROOT_SNAPSHOT_DIR
 EOM
     ;;
+zfs-snapshot)
+        cat >> "${TEMP_SCHROOTCONF}" <<EOM
+zfs-dataset=ZFS_DATASET
+EOM
+    ;;
+
     esac
 fi
 if [ ! -z "$personality" ]; then
@@ -819,6 +1003,7 @@ sed -e "s|CHROOT_NAME|$CHROOT_NAME|g" \
     -e "s|SNAPSHOT_SIZE|$SNAPSHOT_SIZE|g" \
     -e "s|SCHROOT_TYPE|$SCHROOT_TYPE|g" \
     -e "s|CHROOT_SNAPSHOT_DIR|$CHROOT_SNAPSHOT_DIR|g" \
+    -e "s|ZFS_DATASET|$ZFS_DATASET|g" \
     "$TEMP_SCHROOTCONF" \
     | sudo tee "/etc/schroot/chroot.d/sbuild-$CHROOT_NAME" > /dev/null
 rm -f "$TEMP_SCHROOTCONF"
@@ -840,7 +1025,9 @@ sudo chmod a+x "$MNT"/usr/sbin/policy-rc.d
 # Create image finalization script
 sudo bash -c "cat >> $MNT/finish.sh" <<EOM
 #!/bin/bash
-#set -x
+if [ "$DEBUG" = 1 ]; then
+    set -x
+fi
 set -e
 if [ -n "$proxy" ]; then
    mkdir -p /etc/apt/apt.conf.d/
@@ -861,6 +1048,25 @@ EOF
 EOM
 fi
 
+if [ "$USE_PKGBINARYMANGLER" = 1 ]; then
+    sudo bash -c "cat >> $MNT/finish.sh" <<EOM
+   mkdir -p /etc/pkgbinarymangler/
+   cat > /etc/pkgbinarymangler/maintainermangler.conf <<EOF
+# pkgmaintainermangler configuration file
+
+# pkgmaintainermangler will do nothing unless enable is set to "true"
+enable: true
+
+# Configure what happens if /CurrentlyBuilding is present, but invalid
+# (i. e. it does not contain a Package: field). If "ignore" (default),
+# the file is ignored (i. e. the Maintainer field is mangled) and a
+# warning is printed. If "fail" (or any other value), pkgmaintainermangler
+# exits with an error, which causes a package build to fail.
+invalid_currentlybuilding: ignore
+EOF
+EOM
+fi
+
 if [ -n "$TARGET_ARCH" ]; then
     sudo bash -c "cat >> $MNT/finish.sh" <<EOM
 # Configure target architecture
@@ -879,7 +1085,7 @@ apt-get update || true
 echo set debconf/frontend Noninteractive | debconf-communicate
 echo set debconf/priority critical | debconf-communicate
 # Install basic build tool set, trying to match buildd
-apt-get -y --force-yes install $BUILD_PKGS
+apt-get -y --force-yes -o Dpkg::Options::="--force-confold" install $BUILD_PKGS
 # Set up expected /dev entries
 if [ ! -r /dev/stdin ];  then ln -s /proc/self/fd/0 /dev/stdin;  fi
 if [ ! -r /dev/stdout ]; then ln -s /proc/self/fd/1 /dev/stdout; fi
@@ -891,7 +1097,7 @@ EOM
 sudo chmod a+x "$MNT"/finish.sh
 
 case "$SCHROOT_TYPE" in
-"lvm-snapshot")
+"lvm-snapshot"|"zfs-snapshot")
     sudo umount "$MNT"
     rmdir "$MNT"
     ;;
@@ -915,7 +1121,7 @@ echo ""
 echo " To CHANGE the golden image: sudo schroot -c source:${CHROOT_NAME} -u root"
 echo " To ENTER an image snapshot: schroot -c ${CHROOT_NAME}"
 echo " To BUILD within a snapshot: sbuild -A -d ${CHROOT_NAME} PACKAGE*.dsc"
-if [ "$CHROOT_ARCH" != "$TARGET_ARCH" ] ; then
+if [ -n "$TARGET_ARCH" ] && [ "$CHROOT_ARCH" != "$TARGET_ARCH" ] ; then
     echo " To BUILD for ${TARGET_ARCH}: sbuild -A -d ${CHROOT_NAME} --host ${TARGET_ARCH} PACKAGE*.dsc"
 fi
 echo ""

pbuilder-dist

@@ -29,21 +29,29 @@
 # configurations. For example, a symlink called pbuilder-hardy will assume
 # that the target distribution is always meant to be Ubuntu Hardy.
 
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
 import os
+import os.path
+import shutil
 import subprocess
 import sys
+from contextlib import suppress
 
 import debian.deb822
-from distro_info import DebianDistroInfo, UbuntuDistroInfo, DistroDataOutdated
+from distro_info import DebianDistroInfo, DistroDataOutdated, UbuntuDistroInfo
 
 import ubuntutools.misc
 import ubuntutools.version
+from ubuntutools import getLogger
 from ubuntutools.config import UDTConfig
-from ubuntutools.logger import Logger
 from ubuntutools.question import YesNoQuestion
 
+Logger = getLogger()
 
-class PbuilderDist(object):
+
+class PbuilderDist:
     def __init__(self, builder):
         # Base directory where pbuilder will put all the files it creates.
         self.base = None
@@ -82,31 +90,36 @@ class PbuilderDist(object):
         self.chroot_string = None
 
         # Authentication method
-        self.auth = 'sudo'
+        self.auth = "sudo"
 
         # Builder
         self.builder = builder
 
-        self._debian_distros = DebianDistroInfo().all + \
-            ['stable', 'testing', 'unstable']
+        # Distro info
+        self.debian_distro_info = DebianDistroInfo()
+        self.ubuntu_distro_info = UbuntuDistroInfo()
+
+        self._debian_distros = self.debian_distro_info.all + ["stable", "testing", "unstable"]
 
         # Ensure that the used builder is installed
-        paths = set(os.environ['PATH'].split(':'))
-        paths |= set(('/sbin', '/usr/sbin', '/usr/local/sbin'))
+        paths = set(os.environ["PATH"].split(":"))
+        paths |= set(("/sbin", "/usr/sbin", "/usr/local/sbin"))
         if not any(os.path.exists(os.path.join(p, builder)) for p in paths):
             Logger.error('Could not find "%s".', builder)
             sys.exit(1)
 
         ##############################################################
 
-        self.base = os.path.expanduser(os.environ.get('PBUILDFOLDER',
-                                                      '~/pbuilder/'))
+        self.base = os.path.expanduser(os.environ.get("PBUILDFOLDER", "~/pbuilder/"))
 
-        if 'SUDO_USER' in os.environ:
-            Logger.warn('Running under sudo. '
-                        'This is probably not what you want. '
-                        'pbuilder-dist will use sudo itself, when necessary.')
-        if os.stat(os.environ['HOME']).st_uid != os.getuid():
+        if "SUDO_USER" in os.environ:
+            Logger.warning(
+                "Running under sudo. "
+                "This is probably not what you want. "
+                "pbuilder-dist will use sudo itself, "
+                "when necessary."
+            )
+        if os.stat(os.environ["HOME"]).st_uid != os.getuid():
             Logger.error("You don't own $HOME")
             sys.exit(1)
 
@@ -117,8 +130,8 @@ class PbuilderDist(object):
                 Logger.error('Cannot create base directory "%s"', self.base)
                 sys.exit(1)
 
-        if 'PBUILDAUTH' in os.environ:
-            self.auth = os.environ['PBUILDAUTH']
+        if "PBUILDAUTH" in os.environ:
+            self.auth = os.environ["PBUILDAUTH"]
 
         self.system_architecture = ubuntutools.misc.host_architecture()
         self.system_distro = ubuntutools.misc.system_distribution()
@@ -128,7 +141,7 @@ class PbuilderDist(object):
         self.target_distro = self.system_distro
 
     def set_target_distro(self, distro):
-        """ PbuilderDist.set_target_distro(distro) -> None
+        """PbuilderDist.set_target_distro(distro) -> None
 
         Check if the given target distribution name is correct, if it
         isn't know to the system ask the user for confirmation before
@@ -139,16 +152,17 @@ class PbuilderDist(object):
             Logger.error('"%s" is an invalid distribution codename.', distro)
             sys.exit(1)
 
-        if not os.path.isfile(os.path.join('/usr/share/debootstrap/scripts/',
-                                           distro)):
-            if os.path.isdir('/usr/share/debootstrap/scripts/'):
+        if not os.path.isfile(os.path.join("/usr/share/debootstrap/scripts/", distro)):
+            if os.path.isdir("/usr/share/debootstrap/scripts/"):
                 # Debian experimental doesn't have a debootstrap file but
-                # should work nevertheless.
-                if distro not in self._debian_distros:
-                    question = ('Warning: Unknown distribution "%s". '
-                                'Do you want to continue' % distro)
-                    answer = YesNoQuestion().ask(question, 'no')
-                    if answer == 'no':
+                # should work nevertheless. Ubuntu releases automatically use
+                # the gutsy script as of debootstrap 1.0.128+nmu2ubuntu1.1.
+                if distro not in (self._debian_distros + self.ubuntu_distro_info.all):
+                    question = (
+                        f'Warning: Unknown distribution "{distro}". ' "Do you want to continue"
+                    )
+                    answer = YesNoQuestion().ask(question, "no")
+                    if answer == "no":
                         sys.exit(0)
             else:
                 Logger.error('Please install package "debootstrap".')
@@ -157,33 +171,34 @@ class PbuilderDist(object):
         self.target_distro = distro
 
     def set_operation(self, operation):
-        """ PbuilderDist.set_operation -> None
+        """PbuilderDist.set_operation -> None
 
         Check if the given string is a valid pbuilder operation and
         depending on this either save it into the appropiate variable
         or finalize pbuilder-dist's execution.
         """
-        arguments = ('create', 'update', 'build', 'clean', 'login', 'execute')
+        arguments = ("create", "update", "build", "clean", "login", "execute")
 
         if operation not in arguments:
-            if operation.endswith('.dsc'):
+            if operation.endswith(".dsc"):
                 if os.path.isfile(operation):
-                    self.operation = 'build'
+                    self.operation = "build"
                     return [operation]
-                else:
-                    Logger.error('Could not find file "%s".', operation)
-                    sys.exit(1)
-            else:
-                Logger.error('"%s" is not a recognized argument.\n'
-                             'Please use one of these: %s.',
-                             operation, ', '.join(arguments))
+                Logger.error('Could not find file "%s".', operation)
                 sys.exit(1)
-        else:
-            self.operation = operation
-            return []
+
+            Logger.error(
+                '"%s" is not a recognized argument.\nPlease use one of these: %s.',
+                operation,
+                ", ".join(arguments),
+            )
+            sys.exit(1)
+
+        self.operation = operation
+        return []
 
     def get_command(self, remaining_arguments=None):
-        """ PbuilderDist.get_command -> string
+        """PbuilderDist.get_command -> string
 
         Generate the pbuilder command which matches the given configuration
         and return it as a string.
@@ -194,30 +209,34 @@ class PbuilderDist(object):
         if self.build_architecture == self.system_architecture:
             self.chroot_string = self.target_distro
         else:
-            self.chroot_string = (self.target_distro + '-'
-                                  + self.build_architecture)
+            self.chroot_string = self.target_distro + "-" + self.build_architecture
 
         prefix = os.path.join(self.base, self.chroot_string)
-        if '--buildresult' not in remaining_arguments:
-            result = os.path.normpath('%s_result/' % prefix)
+        if "--buildresult" not in remaining_arguments:
+            result = os.path.normpath(f"{prefix}_result/")
         else:
-            location_of_arg = remaining_arguments.index('--buildresult')
-            result = os.path.normpath(remaining_arguments[location_of_arg+1])
-            remaining_arguments.pop(location_of_arg+1)
+            location_of_arg = remaining_arguments.index("--buildresult")
+            result = os.path.normpath(remaining_arguments[location_of_arg + 1])
+            remaining_arguments.pop(location_of_arg + 1)
             remaining_arguments.pop(location_of_arg)
 
-        if not self.logfile and self.operation != 'login':
-            if self.operation == 'build':
-                dsc_files = [a for a in remaining_arguments
-                             if a.strip().endswith('.dsc')]
+        if not self.logfile and self.operation != "login":
+            if self.operation == "build":
+                dsc_files = [a for a in remaining_arguments if a.strip().endswith(".dsc")]
                 assert len(dsc_files) == 1
-                dsc = debian.deb822.Dsc(open(dsc_files[0]))
-                version = ubuntutools.version.Version(dsc['Version'])
-                name = (dsc['Source'] + '_' + version.strip_epoch() + '_' +
-                        self.build_architecture + '.build')
+                dsc = debian.deb822.Dsc(open(dsc_files[0], encoding="utf-8"))
+                version = ubuntutools.version.Version(dsc["Version"])
+                name = (
+                    dsc["Source"]
+                    + "_"
+                    + version.strip_epoch()
+                    + "_"
+                    + self.build_architecture
+                    + ".build"
+                )
                 self.logfile = os.path.join(result, name)
             else:
-                self.logfile = os.path.join(result, 'last_operation.log')
+                self.logfile = os.path.join(result, "last_operation.log")
 
         if not os.path.isdir(result):
             try:
@@ -227,87 +246,91 @@ class PbuilderDist(object):
                 sys.exit(1)
 
         arguments = [
-            '--%s' % self.operation,
-            '--distribution', self.target_distro,
-            '--buildresult', result,
+            f"--{self.operation}",
+            "--distribution",
+            self.target_distro,
+            "--buildresult",
+            result,
         ]
 
-        if self.operation == 'update':
-            arguments += ['--override-config']
+        if self.operation == "update":
+            arguments += ["--override-config"]
 
-        if self.builder == 'pbuilder':
-            arguments += ['--basetgz', prefix + '-base.tgz']
-        elif self.builder == 'cowbuilder':
-            arguments += ['--basepath', prefix + '-base.cow']
+        if self.builder == "pbuilder":
+            arguments += ["--basetgz", prefix + "-base.tgz"]
+        elif self.builder == "cowbuilder":
+            arguments += ["--basepath", prefix + "-base.cow"]
         else:
             Logger.error('Unrecognized builder "%s".', self.builder)
             sys.exit(1)
 
         if self.logfile:
-            arguments += ['--logfile', self.logfile]
+            arguments += ["--logfile", self.logfile]
 
-        if os.path.exists('/var/cache/archive/'):
-            arguments += ['--bindmounts', '/var/cache/archive/']
+        if os.path.exists("/var/cache/archive/"):
+            arguments += ["--bindmounts", "/var/cache/archive/"]
 
         config = UDTConfig()
         if self.target_distro in self._debian_distros:
-            mirror = os.environ.get('MIRRORSITE',
-                                    config.get_value('DEBIAN_MIRROR'))
-            components = 'main'
+            mirror = os.environ.get("MIRRORSITE", config.get_value("DEBIAN_MIRROR"))
+            components = "main"
             if self.extra_components:
-                components += ' contrib non-free'
+                components += " contrib non-free non-free-firmware"
         else:
-            mirror = os.environ.get('MIRRORSITE',
-                                    config.get_value('UBUNTU_MIRROR'))
-            if self.build_architecture not in ('amd64', 'i386'):
-                mirror = os.environ.get(
-                    'MIRRORSITE', config.get_value('UBUNTU_PORTS_MIRROR'))
-            components = 'main restricted'
+            mirror = os.environ.get("MIRRORSITE", config.get_value("UBUNTU_MIRROR"))
+            if self.build_architecture not in ("amd64", "i386"):
+                mirror = os.environ.get("MIRRORSITE", config.get_value("UBUNTU_PORTS_MIRROR"))
+            components = "main restricted"
             if self.extra_components:
-                components += ' universe multiverse'
+                components += " universe multiverse"
 
-        arguments += ['--mirror', mirror]
+        arguments += ["--mirror", mirror]
 
         othermirrors = []
-        localrepo = '/var/cache/archive/' + self.target_distro
+        localrepo = f"/var/cache/archive/{self.target_distro}"
         if os.path.exists(localrepo):
-            repo = 'deb file:///var/cache/archive/ %s/' % self.target_distro
+            repo = f"deb file:///var/cache/archive/ {self.target_distro}/"
             othermirrors.append(repo)
 
         if self.target_distro in self._debian_distros:
-            debian_info = DebianDistroInfo()
             try:
-                codename = debian_info.codename(self.target_distro,
-                                                default=self.target_distro)
+                codename = self.debian_distro_info.codename(
+                    self.target_distro, default=self.target_distro
+                )
             except DistroDataOutdated as error:
-                Logger.warn(error)
-            if codename in (debian_info.devel(), 'experimental'):
+                Logger.warning(error)
+            if codename in (self.debian_distro_info.devel(), "experimental"):
                 self.enable_security = False
                 self.enable_updates = False
                 self.enable_proposed = False
-            elif codename in (debian_info.testing(), 'testing'):
+            elif codename in (self.debian_distro_info.testing(), "testing"):
                 self.enable_updates = False
 
             if self.enable_security:
-                othermirrors.append('deb %s %s/updates %s'
-                                    % (config.get_value('DEBSEC_MIRROR'),
-                                       self.target_distro, components))
+                pocket = "-security"
+                with suppress(ValueError):
+                    # before bullseye (version 11) security suite is /updates
+                    if float(self.debian_distro_info.version(codename)) < 11.0:
+                        pocket = "/updates"
+                othermirrors.append(
+                    f"deb {config.get_value('DEBSEC_MIRROR')}"
+                    f" {self.target_distro}{pocket} {components}"
+                )
             if self.enable_updates:
-                othermirrors.append('deb %s %s-updates %s'
-                                    % (mirror, self.target_distro, components))
+                othermirrors.append(f"deb {mirror} {self.target_distro}-updates {components}")
             if self.enable_proposed:
-                othermirrors.append('deb %s %s-proposed-updates %s'
-                                    % (mirror, self.target_distro, components))
+                othermirrors.append(
+                    f"deb {mirror} {self.target_distro}-proposed-updates {components}"
+                )
             if self.enable_backports:
-                othermirrors.append('deb %s %s-backports %s'
-                                    % (mirror, self.target_distro, components))
+                othermirrors.append(f"deb {mirror} {self.target_distro}-backports {components}")
 
-            aptcache = os.path.join(self.base, 'aptcache', 'debian')
+            aptcache = os.path.join(self.base, "aptcache", "debian")
         else:
             try:
-                dev_release = self.target_distro == UbuntuDistroInfo().devel()
+                dev_release = self.target_distro == self.ubuntu_distro_info.devel()
             except DistroDataOutdated as error:
-                Logger.warn(error)
+                Logger.warning(error)
                 dev_release = True
 
             if dev_release:
@@ -315,46 +338,45 @@ class PbuilderDist(object):
                 self.enable_updates = False
 
             if self.enable_security:
-                othermirrors.append('deb %s %s-security %s'
-                                    % (mirror, self.target_distro, components))
+                othermirrors.append(f"deb {mirror} {self.target_distro}-security {components}")
             if self.enable_updates:
-                othermirrors.append('deb %s %s-updates %s'
-                                    % (mirror, self.target_distro, components))
+                othermirrors.append(f"deb {mirror} {self.target_distro}-updates {components}")
             if self.enable_proposed:
-                othermirrors.append('deb %s %s-proposed %s'
-                                    % (mirror, self.target_distro, components))
+                othermirrors.append(f"deb {mirror} {self.target_distro}-proposed {components}")
 
-            aptcache = os.path.join(self.base, 'aptcache', 'ubuntu')
+            aptcache = os.path.join(self.base, "aptcache", "ubuntu")
 
-        if 'OTHERMIRROR' in os.environ:
-            othermirrors += os.environ['OTHERMIRROR'].split('|')
+        if "OTHERMIRROR" in os.environ:
+            othermirrors += os.environ["OTHERMIRROR"].split("|")
 
         if othermirrors:
-            arguments += ['--othermirror', '|'.join(othermirrors)]
+            arguments += ["--othermirror", "|".join(othermirrors)]
 
         # Work around LP:#599695
-        if (ubuntutools.misc.system_distribution() == 'Debian'
-                and self.target_distro not in self._debian_distros):
-            if not os.path.exists(
-                    '/usr/share/keyrings/ubuntu-archive-keyring.gpg'):
-                Logger.error('ubuntu-keyring not installed')
+        if (
+            ubuntutools.misc.system_distribution() == "Debian"
+            and self.target_distro not in self._debian_distros
+        ):
+            if not os.path.exists("/usr/share/keyrings/ubuntu-archive-keyring.gpg"):
+                Logger.error("ubuntu-keyring not installed")
                 sys.exit(1)
             arguments += [
-                '--debootstrapopts',
-                '--keyring=/usr/share/keyrings/ubuntu-archive-keyring.gpg',
+                "--debootstrapopts",
+                "--keyring=/usr/share/keyrings/ubuntu-archive-keyring.gpg",
             ]
-        elif (ubuntutools.misc.system_distribution() == 'Ubuntu'
-                and self.target_distro in self._debian_distros):
-            if not os.path.exists(
-                    '/usr/share/keyrings/debian-archive-keyring.gpg'):
-                Logger.error('debian-archive-keyring not installed')
+        elif (
+            ubuntutools.misc.system_distribution() == "Ubuntu"
+            and self.target_distro in self._debian_distros
+        ):
+            if not os.path.exists("/usr/share/keyrings/debian-archive-keyring.gpg"):
+                Logger.error("debian-archive-keyring not installed")
                 sys.exit(1)
             arguments += [
-                '--debootstrapopts',
-                '--keyring=/usr/share/keyrings/debian-archive-keyring.gpg',
+                "--debootstrapopts",
+                "--keyring=/usr/share/keyrings/debian-archive-keyring.gpg",
             ]
 
-        arguments += ['--aptcache', aptcache, '--components', components]
+        arguments += ["--aptcache", aptcache, "--components", components]
 
         if not os.path.isdir(aptcache):
             try:
@@ -364,13 +386,11 @@ class PbuilderDist(object):
                 sys.exit(1)
 
         if self.build_architecture != self.system_architecture:
-            arguments += ['--debootstrapopts',
-                          '--arch=' + self.build_architecture]
+            arguments += ["--debootstrapopts", "--arch=" + self.build_architecture]
 
-        apt_conf_dir = os.path.join(self.base,
-                                    'etc/%s/apt.conf' % self.target_distro)
+        apt_conf_dir = os.path.join(self.base, f"etc/{self.target_distro}/apt.conf")
         if os.path.exists(apt_conf_dir):
-            arguments += ['--aptconfdir', apt_conf_dir]
+            arguments += ["--aptconfdir", apt_conf_dir]
 
         # Append remaining arguments
         if remaining_arguments:
@@ -381,28 +401,28 @@ class PbuilderDist(object):
         # With both common variable name schemes (BTS: #659060).
         return [
             self.auth,
-            'HOME=' + os.path.expanduser('~'),
-            'ARCHITECTURE=' + self.build_architecture,
-            'DISTRIBUTION=' + self.target_distro,
-            'ARCH=' + self.build_architecture,
-            'DIST=' + self.target_distro,
-            'DEB_BUILD_OPTIONS=' + os.environ.get('DEB_BUILD_OPTIONS', ''),
+            "HOME=" + os.path.expanduser("~"),
+            "ARCHITECTURE=" + self.build_architecture,
+            "DISTRIBUTION=" + self.target_distro,
+            "ARCH=" + self.build_architecture,
+            "DIST=" + self.target_distro,
+            "DEB_BUILD_OPTIONS=" + os.environ.get("DEB_BUILD_OPTIONS", ""),
             self.builder,
         ] + arguments
 
 
 def show_help(exit_code=0):
-    """ help() -> None
+    """help() -> None
 
     Print a help message for pbuilder-dist, and exit with the given code.
     """
-    print('See  man pbuilder-dist  for more information.')
+    Logger.info("See  man pbuilder-dist  for more information.")
 
     sys.exit(exit_code)
 
 
 def main():
-    """ main() -> None
+    """main() -> None
 
     This is pbuilder-dist's main function. It creates a PbuilderDist
     object, modifies all necessary settings taking data from the
@@ -410,100 +430,122 @@ def main():
     the script and runs pbuilder itself or exists with an error message.
     """
     script_name = os.path.basename(sys.argv[0])
-    parts = script_name.split('-')
+    parts = script_name.split("-")
 
     # Copy arguments into another list for save manipulation
     args = sys.argv[1:]
 
-    if ('-' in script_name and parts[0] not in ('pbuilder', 'cowbuilder')
-            or len(parts) > 3):
-        Logger.error('"%s" is not a valid name for a "pbuilder-dist" '
-                     'executable.', script_name)
+    if "-" in script_name and parts[0] not in ("pbuilder", "cowbuilder") or len(parts) > 3:
+        Logger.error('"%s" is not a valid name for a "pbuilder-dist" executable.', script_name)
         sys.exit(1)
 
     if len(args) < 1:
-        Logger.error('Insufficient number of arguments.')
+        Logger.error("Insufficient number of arguments.")
         show_help(1)
 
-    if args[0] in ('-h', '--help', 'help'):
+    if args[0] in ("-h", "--help", "help"):
         show_help(0)
 
     app = PbuilderDist(parts[0])
 
-    if len(parts) > 1 and parts[1] != 'dist' and '.' not in parts[1]:
+    if len(parts) > 1 and parts[1] != "dist" and "." not in parts[1]:
         app.set_target_distro(parts[1])
     else:
         app.set_target_distro(args.pop(0))
 
     if len(parts) > 2:
         requested_arch = parts[2]
-    elif len(args) > 0 and args[0] in (
-            'alpha', 'amd64', 'arm', 'armeb', 'armel', 'armhf', 'arm64',
-            'i386', 'lpia', 'm68k', 'mips', 'mipsel', 'powerpc', 'ppc64',
-            'ppc64el', 's390x', 'sh4', 'sh4eb', 'sparc', 'sparc64'):
-        requested_arch = args.pop(0)
+    elif len(args) > 0:
+        if shutil.which("arch-test") is not None:
+            arch_test = subprocess.run(
+                ["arch-test", args[0]], check=False, stdout=subprocess.DEVNULL
+            )
+            if arch_test.returncode == 0:
+                requested_arch = args.pop(0)
+            elif os.path.isdir("/usr/lib/arch-test") and args[0] in os.listdir(
+                "/usr/lib/arch-test/"
+            ):
+                Logger.error(
+                    'Architecture "%s" is not supported on your '
+                    "currently running kernel. Consider installing "
+                    "the qemu-user-static package to enable the use of "
+                    "foreign architectures.",
+                    args[0],
+                )
+                sys.exit(1)
+            else:
+                requested_arch = None
+        else:
+            Logger.error(
+                'Cannot determine if "%s" is a valid architecture. '
+                "Please install the arch-test package and retry.",
+                args[0],
+            )
+            sys.exit(1)
     else:
         requested_arch = None
 
     if requested_arch:
         app.build_architecture = requested_arch
         # For some foreign architectures we need to use qemu
-        if (requested_arch != app.system_architecture
-                and (app.system_architecture, requested_arch) not in [
-                    ('amd64', 'i386'), ('amd64', 'lpia'), ('arm', 'armel'),
-                    ('armel', 'arm'), ('armel', 'armhf'), ('armhf', 'armel'),
-                    ('arm64', 'arm'), ('arm64', 'armhf'), ('arm64', 'armel'),
-                    ('i386', 'lpia'), ('lpia', 'i386'), ('powerpc', 'ppc64'),
-                    ('ppc64', 'powerpc'), ('sparc', 'sparc64'),
-                    ('sparc64', 'sparc')]):
-            args += ['--debootstrap', 'qemu-debootstrap']
+        if requested_arch != app.system_architecture and (
+            app.system_architecture,
+            requested_arch,
+        ) not in [
+            ("amd64", "i386"),
+            ("arm64", "arm"),
+            ("arm64", "armhf"),
+            ("powerpc", "ppc64"),
+            ("ppc64", "powerpc"),
+        ]:
+            args += ["--debootstrap", "debootstrap"]
 
-    if 'mainonly' in sys.argv or '--main-only' in sys.argv:
+    if "mainonly" in sys.argv or "--main-only" in sys.argv:
         app.extra_components = False
-        if 'mainonly' in sys.argv:
-            args.remove('mainonly')
+        if "mainonly" in sys.argv:
+            args.remove("mainonly")
         else:
-            args.remove('--main-only')
+            args.remove("--main-only")
 
-    if '--release-only' in sys.argv:
-        args.remove('--release-only')
+    if "--release-only" in sys.argv:
+        args.remove("--release-only")
         app.enable_security = False
         app.enable_updates = False
         app.enable_proposed = False
-    elif '--security-only' in sys.argv:
-        args.remove('--security-only')
+    elif "--security-only" in sys.argv:
+        args.remove("--security-only")
         app.enable_updates = False
         app.enable_proposed = False
-    elif '--updates-only' in sys.argv:
-        args.remove('--updates-only')
+    elif "--updates-only" in sys.argv:
+        args.remove("--updates-only")
         app.enable_proposed = False
-    elif '--backports' in sys.argv:
-        args.remove('--backports')
+    elif "--backports" in sys.argv:
+        args.remove("--backports")
         app.enable_backports = True
 
     if len(args) < 1:
-        Logger.error('Insufficient number of arguments.')
+        Logger.error("Insufficient number of arguments.")
         show_help(1)
 
     # Parse the operation
     args = app.set_operation(args.pop(0)) + args
 
-    if app.operation == 'build':
-        if len([a for a in args if a.strip().endswith('.dsc')]) != 1:
-            msg = 'You have to specify one .dsc file if you want to build.'
+    if app.operation == "build":
+        if len([a for a in args if a.strip().endswith(".dsc")]) != 1:
+            msg = "You have to specify one .dsc file if you want to build."
             Logger.error(msg)
             sys.exit(1)
 
     # Execute the pbuilder command
-    if '--debug-echo' not in args:
+    if "--debug-echo" not in args:
         sys.exit(subprocess.call(app.get_command(args)))
     else:
-        print(app.get_command([arg for arg in args if arg != '--debug-echo']))
+        Logger.info(app.get_command([arg for arg in args if arg != "--debug-echo"]))
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     try:
         main()
     except KeyboardInterrupt:
-        Logger.error('Manually aborted.')
+        Logger.error("Manually aborted.")
         sys.exit(1)

pm-helper

@@ -0,0 +1,142 @@
+#!/usr/bin/python3
+# Find the next thing to work on for proposed-migration
+# Copyright (C) 2023 Canonical Ltd.
+# Author: Steve Langasek <steve.langasek@ubuntu.com>
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License, version 3.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+import lzma
+import sys
+import webbrowser
+from argparse import ArgumentParser
+
+import yaml
+from launchpadlib.launchpad import Launchpad
+
+from ubuntutools.utils import get_url
+
+# proposed-migration is only concerned with the devel series; unlike other
+# tools, don't make this configurable
+excuses_url = "https://ubuntu-archive-team.ubuntu.com/proposed-migration/update_excuses.yaml.xz"
+
+
+def get_proposed_version(excuses, package):
+    for k in excuses["sources"]:
+        if k["source"] == package:
+            return k.get("new-version")
+    return None
+
+
+def claim_excuses_bug(launchpad, bug, package):
+    print(f"LP: #{bug.id}: {bug.title}")
+    ubuntu = launchpad.distributions["ubuntu"]
+    series = ubuntu.current_series.fullseriesname
+
+    for task in bug.bug_tasks:
+        # targeting to a series doesn't make the default task disappear,
+        # it just makes it useless
+        if task.bug_target_name == f"{package} ({series})":
+            our_task = task
+            break
+        if task.bug_target_name == f"{package} (Ubuntu)":
+            our_task = task
+
+    if our_task.assignee == launchpad.me:
+        print("Bug already assigned to you.")
+        return True
+    if our_task.assignee:
+        print(f"Currently assigned to {our_task.assignee.name}")
+
+    print("""Do you want to claim this bug? [yN] """, end="")
+    sys.stdout.flush()
+    response = sys.stdin.readline()
+    if response.strip().lower().startswith("y"):
+        our_task.assignee = launchpad.me
+        our_task.lp_save()
+        return True
+
+    return False
+
+
+def create_excuses_bug(launchpad, package, version):
+    print("Will open a new bug")
+    bug = launchpad.bugs.createBug(
+        title=f"proposed-migration for {package} {version}",
+        tags=("update-excuse"),
+        target=f"https://api.launchpad.net/devel/ubuntu/+source/{package}",
+        description=f"{package} {version} is stuck in -proposed.",
+    )
+
+    task = bug.bug_tasks[0]
+    task.assignee = launchpad.me
+    task.lp_save()
+
+    print(f"Opening {bug.web_link} in browser")
+    webbrowser.open(bug.web_link)
+    return bug
+
+
+def has_excuses_bugs(launchpad, package):
+    ubuntu = launchpad.distributions["ubuntu"]
+    pkg = ubuntu.getSourcePackage(name=package)
+    if not pkg:
+        raise ValueError(f"No such source package: {package}")
+
+    tasks = pkg.searchTasks(tags=["update-excuse"], order_by=["id"])
+
+    bugs = [task.bug for task in tasks]
+    if not bugs:
+        return False
+
+    if len(bugs) == 1:
+        print(f"There is 1 open update-excuse bug against {package}")
+    else:
+        print(f"There are {len(bugs)} open update-excuse bugs against {package}")
+
+    for bug in bugs:
+        if claim_excuses_bug(launchpad, bug, package):
+            return True
+
+    return True
+
+
+def main():
+    parser = ArgumentParser()
+    parser.add_argument("-l", "--launchpad", dest="launchpad_instance", default="production")
+    parser.add_argument(
+        "-v", "--verbose", default=False, action="store_true", help="be more verbose"
+    )
+    parser.add_argument("package", nargs="?", help="act on this package only")
+    args = parser.parse_args()
+
+    args.launchpad = Launchpad.login_with("pm-helper", args.launchpad_instance, version="devel")
+
+    f = get_url(excuses_url, False)
+    with lzma.open(f) as lzma_f:
+        excuses = yaml.load(lzma_f, Loader=yaml.CSafeLoader)
+
+    if args.package:
+        try:
+            if not has_excuses_bugs(args.launchpad, args.package):
+                proposed_version = get_proposed_version(excuses, args.package)
+                if not proposed_version:
+                    print(f"Package {args.package} not found in -proposed.")
+                    sys.exit(1)
+                create_excuses_bug(args.launchpad, args.package, proposed_version)
+        except ValueError as e:
+            sys.stderr.write(f"{e}\n")
+    else:
+        pass  # for now
+
+
+if __name__ == "__main__":
+    sys.exit(main())

pull-debian-ddebs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-debian-ddebs -- pull ddeb package files for debian
+# Basic usage: pull-debian-ddebs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="debian", pull="ddebs")

pull-debian-debdiff

@@ -17,27 +17,32 @@
 # OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 
-import optparse
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+import argparse
 import sys
 
 import debian.changelog
 
+from ubuntutools import getLogger
 from ubuntutools.archive import DebianSourcePackage, DownloadError
 from ubuntutools.config import UDTConfig
-from ubuntutools.logger import Logger
 from ubuntutools.version import Version
 
+Logger = getLogger()
+
 
 def previous_version(package, version, distance):
     "Given an (extracted) package, determine the version distance versions ago"
     upver = Version(version).upstream_version
-    filename = '%s-%s/debian/changelog' % (package, upver)
-    changelog_file = open(filename, 'r')
+    filename = f"{package}-{upver}/debian/changelog"
+    changelog_file = open(filename, "r", encoding="utf-8")
     changelog = debian.changelog.Changelog(changelog_file.read())
     changelog_file.close()
     seen = 0
     for entry in changelog:
-        if entry.distributions == 'UNRELEASED':
+        if entry.distributions == "UNRELEASED":
             continue
         if seen == distance:
             return entry.version.full_version
@@ -46,69 +51,78 @@ def previous_version(package, version, distance):
 
 
 def main():
-    parser = optparse.OptionParser('%prog [options] <package> <version> '
-                                   '[distance]')
-    parser.add_option('-f', '--fetch',
-                      dest='fetch_only', default=False, action='store_true',
-                      help="Only fetch the source packages, don't diff.")
-    parser.add_option('-d', '--debian-mirror', metavar='DEBIAN_MIRROR',
-                      dest='debian_mirror',
-                      help='Preferred Debian mirror '
-                           '(default: http://deb.debian.org/debian)')
-    parser.add_option('-s', '--debsec-mirror', metavar='DEBSEC_MIRROR',
-                      dest='debsec_mirror',
-                      help='Preferred Debian Security mirror '
-                           '(default: http://security.debian.org)')
-    parser.add_option('--no-conf',
-                      dest='no_conf', default=False, action='store_true',
-                      help="Don't read config files or environment variables")
+    parser = argparse.ArgumentParser(usage="%(prog)s [options] <package> <version> [distance]")
+    parser.add_argument(
+        "-f",
+        "--fetch",
+        dest="fetch_only",
+        default=False,
+        action="store_true",
+        help="Only fetch the source packages, don't diff.",
+    )
+    parser.add_argument(
+        "-d",
+        "--debian-mirror",
+        metavar="DEBIAN_MIRROR",
+        dest="debian_mirror",
+        help="Preferred Debian mirror (default: http://deb.debian.org/debian)",
+    )
+    parser.add_argument(
+        "-s",
+        "--debsec-mirror",
+        metavar="DEBSEC_MIRROR",
+        dest="debsec_mirror",
+        help="Preferred Debian Security mirror (default: http://security.debian.org)",
+    )
+    parser.add_argument(
+        "--no-conf",
+        dest="no_conf",
+        default=False,
+        action="store_true",
+        help="Don't read config files or environment variables",
+    )
+    parser.add_argument("package", help=argparse.SUPPRESS)
+    parser.add_argument("version", help=argparse.SUPPRESS)
+    parser.add_argument("distance", default=1, type=int, nargs="?", help=argparse.SUPPRESS)
+    args = parser.parse_args()
 
-    opts, args = parser.parse_args()
-    if len(args) < 2:
-        parser.error('Must specify package and version')
-    elif len(args) > 3:
-        parser.error('Too many arguments')
-    package = args[0]
-    version = args[1]
-    distance = int(args[2]) if len(args) > 2 else 1
+    config = UDTConfig(args.no_conf)
+    if args.debian_mirror is None:
+        args.debian_mirror = config.get_value("DEBIAN_MIRROR")
+    if args.debsec_mirror is None:
+        args.debsec_mirror = config.get_value("DEBSEC_MIRROR")
+    mirrors = [args.debsec_mirror, args.debian_mirror]
 
-    config = UDTConfig(opts.no_conf)
-    if opts.debian_mirror is None:
-        opts.debian_mirror = config.get_value('DEBIAN_MIRROR')
-    if opts.debsec_mirror is None:
-        opts.debsec_mirror = config.get_value('DEBSEC_MIRROR')
-    mirrors = [opts.debsec_mirror, opts.debian_mirror]
+    Logger.info("Downloading %s %s", args.package, args.version)
 
-    Logger.normal('Downloading %s %s', package, version)
-
-    newpkg = DebianSourcePackage(package, version, mirrors=mirrors)
+    newpkg = DebianSourcePackage(args.package, args.version, mirrors=mirrors)
     try:
         newpkg.pull()
     except DownloadError as e:
-        Logger.error('Failed to download: %s', str(e))
+        Logger.error("Failed to download: %s", str(e))
         sys.exit(1)
     newpkg.unpack()
 
-    if opts.fetch_only:
+    if args.fetch_only:
         sys.exit(0)
 
-    oldversion = previous_version(package, version, distance)
+    oldversion = previous_version(args.package, args.version, args.distance)
     if not oldversion:
-        Logger.error('No previous version could be found')
+        Logger.error("No previous version could be found")
         sys.exit(1)
-    Logger.normal('Downloading %s %s', package, oldversion)
+    Logger.info("Downloading %s %s", args.package, oldversion)
 
-    oldpkg = DebianSourcePackage(package, oldversion, mirrors=mirrors)
+    oldpkg = DebianSourcePackage(args.package, oldversion, mirrors=mirrors)
     try:
         oldpkg.pull()
     except DownloadError as e:
-        Logger.error('Failed to download: %s', str(e))
+        Logger.error("Failed to download: %s", str(e))
         sys.exit(1)
-    print('file://' + oldpkg.debdiff(newpkg, diffstat=True))
+    Logger.info("file://%s", oldpkg.debdiff(newpkg, diffstat=True))
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     try:
         main()
     except KeyboardInterrupt:
-        Logger.normal('User abort.')
+        Logger.info("User abort.")

pull-debian-debs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-debian-debs -- pull deb package files for debian
+# Basic usage: pull-debian-debs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="debian", pull="debs")

pull-debian-source

@@ -1,148 +1,14 @@
 #!/usr/bin/python3
 #
-# pull-debian-source -- pull a source package from Launchpad
-# Copyright (C) 2011, Stefano Rivera <stefanor@ubuntu.com>
-# Inspired by a tool of the same name by Nathan Handler.
+# pull-debian-source -- pull source package files for debian
+# Basic usage: pull-debian-source <package name> [version|release]
 #
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# See pull-pkg
 
-import json
-import optparse
-import sys
-import urllib.request
-import urllib.error
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
 
-from distro_info import DebianDistroInfo, DistroDataOutdated
+from ubuntutools.pullpkg import PullPkg
 
-from ubuntutools.archive import DebianSourcePackage, DownloadError, rmadison
-from ubuntutools.config import UDTConfig
-from ubuntutools.logger import Logger
-
-
-def is_suite(version):
-    """If version could be considered to be a Debian suite, return the
-    canonical suite name. Otherwise None
-    """
-    debian_info = DebianDistroInfo()
-    debian_releases = debian_info.all + ['experimental']
-
-    if '-' in version:
-        release, pocket = version.split('-', 1)
-        release = debian_info.codename(release, default=release)
-        if release in debian_releases:
-            if pocket in ('proposed-updates', 'p-u'):
-                return (release + '-proposed-updates')
-            elif pocket == 'security':
-                return (release + '-security')
-    else:
-        release = debian_info.codename(version, default=version)
-        if release in debian_releases:
-            return release
-    return None
-
-
-def source_package_for(binary, release):
-    """Query DDE to find the source package for a particular binary"""
-    try:
-        release = DebianDistroInfo().codename(release, default=release)
-    except DistroDataOutdated as e:
-        Logger.warn(e)
-    url = ('http://dde.debian.net/dde/q/udd/dist/d:debian/r:%s/p:%s/?t=json'
-           % (release, binary))
-    data = None
-    try:
-        data = json.load(urllib.request.urlopen(url))['r']
-    except urllib.error.URLError as e:
-        Logger.error('Unable to retrieve package information from DDE: '
-                     '%s (%s)', url, str(e))
-    except ValueError as e:
-        Logger.error('Unable to parse JSON response from DDE: '
-                     '%s (%s)', url, str(e))
-    if not data:
-        return None
-    return data[0]['source']
-
-
-def main():
-    usage = 'Usage: %prog <package> [release|version]'
-    parser = optparse.OptionParser(usage)
-    parser.add_option('-d', '--download-only',
-                      dest='download_only', default=False, action='store_true',
-                      help='Do not extract the source package')
-    parser.add_option('-m', '--mirror', metavar='DEBIAN_MIRROR',
-                      dest='debian_mirror',
-                      help='Preferred Debian mirror (default: %s)'
-                           % UDTConfig.defaults['DEBIAN_MIRROR'])
-    parser.add_option('-s', '--security-mirror', metavar='DEBSEC_MIRROR',
-                      dest='debsec_mirror',
-                      help='Preferred Debian Security mirror (default: %s)'
-                           % UDTConfig.defaults['DEBSEC_MIRROR'])
-    parser.add_option('--no-conf',
-                      dest='no_conf', default=False, action='store_true',
-                      help="Don't read config files or environment variables")
-    parser.add_option('--no-verify-signature',
-                      dest='verify_signature', default=True,
-                      action='store_false',
-                      help="Allow signature verification failure")
-    (options, args) = parser.parse_args()
-    if not args:
-        parser.error('Must specify package name')
-    elif len(args) > 2:
-        parser.error('Too many arguments. '
-                     'Must only specify package and (optionally) release.')
-
-    config = UDTConfig(options.no_conf)
-    if options.debian_mirror is None:
-        options.debian_mirror = config.get_value('DEBIAN_MIRROR')
-    if options.debsec_mirror is None:
-        options.debsec_mirror = config.get_value('DEBSEC_MIRROR')
-
-    package = args[0].lower()
-
-    version = args[1] if len(args) > 1 else 'unstable'
-    component = None
-
-    suite = is_suite(version)
-    if suite is not None:
-        line = list(rmadison('debian', package, suite, 'source'))
-        if not line:
-            source_package = source_package_for(package, suite)
-            if source_package is not None and package != source_package:
-                package = source_package
-                line = list(rmadison('debian', package, suite, 'source'))
-            if not line:
-                Logger.error('Unable to find %s in Debian suite "%s".', package,
-                             suite)
-                sys.exit(1)
-        line = line[-1]
-        version = line['version']
-        component = line['component']
-
-    Logger.normal('Downloading %s version %s', package, version)
-    srcpkg = DebianSourcePackage(package, version, component=component,
-                                 mirrors=[options.debian_mirror,
-                                          options.debsec_mirror])
-    try:
-        srcpkg.pull(verify_signature=options.verify_signature)
-    except DownloadError as e:
-        Logger.error('Failed to download: %s', str(e))
-        sys.exit(1)
-    if not options.download_only:
-        srcpkg.unpack()
-
-
-if __name__ == '__main__':
-    try:
-        main()
-    except KeyboardInterrupt:
-        Logger.normal('User abort.')
+if __name__ == "__main__":
+    PullPkg.main(distro="debian", pull="source")

pull-debian-udebs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-debian-udebs -- pull udeb package files for debian
+# Basic usage: pull-debian-udebs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="debian", pull="udebs")

pull-lp-ddebs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-lp-ddebs -- pull ddeb package files for ubuntu
+# Basic usage: pull-lp-ddebs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="ubuntu", pull="ddebs")

pull-lp-debs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-lp-debs -- pull deb package files for ubuntu
+# Basic usage: pull-lp-debs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="ubuntu", pull="debs")

pull-lp-source

@@ -1,150 +1,14 @@
 #!/usr/bin/python3
 #
-# pull-lp-source -- pull a source package from Launchpad
-# Basic usage: pull-lp-source <source package> [<release>]
+# pull-lp-source -- pull source package files for ubuntu
+# Basic usage: pull-lp-source <package name> [version|release]
 #
-# Copyright (C) 2008,      Iain Lane <iain@orangesquash.org.uk>,
-#               2010-2011, Stefano Rivera <stefanor@ubuntu.com>
-#
-# ##################################################################
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 3
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# See file /usr/share/common-licenses/GPL for more details.
-#
-# ##################################################################
+# See pull-pkg
 
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
 
-import json
-import os
-import sys
-import urllib.error
-import urllib.request
-from optparse import OptionParser
+from ubuntutools.pullpkg import PullPkg
 
-from distro_info import UbuntuDistroInfo, DistroDataOutdated
-
-from ubuntutools.archive import UbuntuSourcePackage, DownloadError
-from ubuntutools.config import UDTConfig
-from ubuntutools.lp.lpapicache import Distribution, Launchpad
-from ubuntutools.lp.udtexceptions import (SeriesNotFoundException,
-                                          PackageNotFoundException,
-                                          PocketDoesNotExistError)
-from ubuntutools.logger import Logger
-from ubuntutools.misc import split_release_pocket
-
-
-def source_package_for(binary, release):
-    """Query DDE to find the source package for a particular binary
-    Should really do this with LP, but it's not possible LP: #597041
-    """
-    url = ('http://dde.debian.net/dde/q/udd/dist/d:ubuntu/r:%s/p:%s/?t=json'
-           % (release, binary))
-    data = None
-    try:
-        data = json.load(urllib.request.urlopen(url))['r']
-    except urllib.error.URLError as e:
-        Logger.error('Unable to retrieve package information from DDE: '
-                     '%s (%s)', url, str(e))
-    except ValueError as e:
-        Logger.error('Unable to parse JSON response from DDE: '
-                     '%s (%s)', url, str(e))
-    if not data:
-        return None
-    return data[0]['source']
-
-
-def main():
-    usage = "Usage: %prog <package> [release|version]"
-    opt_parser = OptionParser(usage)
-    opt_parser.add_option('-d', '--download-only',
-                          dest='download_only', default=False,
-                          action='store_true',
-                          help="Do not extract the source package")
-    opt_parser.add_option('-m', '--mirror', metavar='UBUNTU_MIRROR',
-                          dest='ubuntu_mirror',
-                          help='Preferred Ubuntu mirror (default: Launchpad)')
-    opt_parser.add_option('--no-conf',
-                          dest='no_conf', default=False, action='store_true',
-                          help="Don't read config files or environment "
-                               "variables")
-    (options, args) = opt_parser.parse_args()
-    if not args:
-        opt_parser.error("Must specify package name")
-
-    config = UDTConfig(options.no_conf)
-    if options.ubuntu_mirror is None:
-        options.ubuntu_mirror = config.get_value('UBUNTU_MIRROR')
-
-    # Login anonymously to LP
-    Launchpad.login_anonymously()
-
-    package = str(args[0]).lower()
-
-    ubuntu_info = UbuntuDistroInfo()
-    if len(args) > 1:  # Custom distribution specified.
-        version = str(args[1])
-    else:
-        try:
-            version = os.getenv('DIST') or ubuntu_info.devel()
-        except DistroDataOutdated as e:
-            Logger.warn("%s\nOr specify a distribution.", e)
-            sys.exit(1)
-    component = None
-
-    # Release, not package version number:
-    release = None
-    pocket = None
-    try:
-        (release, pocket) = split_release_pocket(version, default=None)
-    except PocketDoesNotExistError:
-        pass
-    if release in ubuntu_info.all:
-        archive = Distribution('ubuntu').getArchive()
-        try:
-            spph = archive.getSourcePackage(package, release, pocket)
-        except SeriesNotFoundException as e:
-            Logger.error(str(e))
-            sys.exit(1)
-        except PackageNotFoundException as e:
-            source_package = source_package_for(package, release)
-            if source_package is not None and source_package != package:
-                try:
-                    spph = archive.getSourcePackage(source_package, release,
-                                                    pocket)
-                    package = source_package
-                except PackageNotFoundException:
-                    Logger.error(str(e))
-                    sys.exit(1)
-            else:
-                Logger.error(str(e))
-                sys.exit(1)
-
-        version = spph.getVersion()
-        component = spph.getComponent()
-
-    Logger.normal('Downloading %s version %s', package, version)
-    srcpkg = UbuntuSourcePackage(package, version, component=component,
-                                 mirrors=[options.ubuntu_mirror])
-    try:
-        srcpkg.pull()
-    except DownloadError as e:
-        Logger.error('Failed to download: %s', str(e))
-        sys.exit(1)
-    if not options.download_only:
-        srcpkg.unpack()
-
-
-if __name__ == '__main__':
-    try:
-        main()
-    except KeyboardInterrupt:
-        Logger.normal('User abort.')
+if __name__ == "__main__":
+    PullPkg.main(distro="ubuntu", pull="source")

pull-lp-udebs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-lp-udebs -- pull udeb package files for ubuntu
+# Basic usage: pull-lp-udebs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="ubuntu", pull="udebs")

pull-pkg

@@ -0,0 +1,32 @@
+#!/usr/bin/python3
+#
+# pull-pkg -- pull package files for debian/ubuntu/uca/ppa
+# Basic usage: pull-pkg -D distro -p type <package name> [version|release]
+#
+# Copyright (C) 2008,      Iain Lane <iain@orangesquash.org.uk>,
+#               2010-2011, Stefano Rivera <stefanor@ubuntu.com>
+#               2017-2018, Dan Streetman <ddstreet@canonical.com>
+#
+# ##################################################################
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 3
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# See file /usr/share/common-licenses/GPL for more details.
+#
+# ##################################################################
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main()

pull-ppa-ddebs

@@ -0,0 +1,15 @@
+#!/usr/bin/python3
+#
+# pull-ppa-ddebs -- pull ddeb package files for a Launchpad Personal Package Archive
+# Basic usage: pull-ppa-ddebs <package name> <ppa:USER/NAME> [version|release]
+#              pull-ppa-ddebs --ppa USER/NAME <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="ppa", pull="ddebs")

pull-ppa-debs

@@ -0,0 +1,15 @@
+#!/usr/bin/python3
+#
+# pull-ppa-debs -- pull deb package files for a Launchpad Personal Package Archive
+# Basic usage: pull-ppa-debs <package name> <ppa:USER/NAME> [version|release]
+#              pull-ppa-debs --ppa USER/NAME <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="ppa", pull="debs")

pull-ppa-source

@@ -0,0 +1,15 @@
+#!/usr/bin/python3
+#
+# pull-ppa-source -- pull source package files for a Launchpad Personal Package Archive
+# Basic usage: pull-ppa-source <package name> <ppa:USER/NAME> [version|release]
+#              pull-ppa-source --ppa USER/NAME <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="ppa", pull="source")

pull-ppa-udebs

@@ -0,0 +1,15 @@
+#!/usr/bin/python3
+#
+# pull-ppa-udebs -- pull udeb package files for a Launchpad Personal Package Archive
+# Basic usage: pull-ppa-udebs <package name> <ppa:USER/NAME> [version|release]
+#              pull-ppa-udebs --ppa USER/NAME <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="ppa", pull="udebs")

pull-revu-source

@@ -1,59 +0,0 @@
-#!/usr/bin/perl
-# Script Name: pull-revu-source
-# Author: Nathan Handler <nhandler@ubuntu.com>
-# Usage: pull-revu-source <source package>
-# Copyright (C) 2009 Nathan Handler <nhandler@ubuntu.com>
-# Based on revupull in kubuntu-dev-tools,
-# written by Harald Sitter <apachelogger@ubuntu.com>
-# License: GNU General Public License
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# On Debian GNU/Linux systems, the complete text of the GNU General
-# Public License can be found in the /usr/share/common-licenses/GPL-3 file.
-
-use warnings;
-use strict;
-use File::Basename;
-use Getopt::Long;
-
-my $REVU = "revu.ubuntuwire.com";
-
-my($package) = lc($ARGV[0]) || usage(2);
-my($help)=0;
-GetOptions('help' => \$help);
-usage(0) if($help);
-
-eval { require LWP::Simple; };
-if ($@=~ m#^Can\'t locate LWP/Simple#) {
-	print(STDERR "Please install libwww-perl.\n");
-	exit(1);
-}
-use LWP::Simple;
-
-dget(getURL());
-
-sub getURL {
-	my($url) = "http://" . $REVU . "/dsc.py?url&package=" . $package;
-	my($page)=get($url);
-	die("Could Not Get $url") unless (defined $page);
-	return $page;
-}
-
-sub dget {
-	my($dsc) = @_;
-	exec("dget -xu $dsc");
-}
-
-sub usage {
-	my($exit) = @_;
-	my($name)=basename($0);
-	print("USAGE: $name [-h] <source package>\n");
-	exit($exit);
-}

pull-uca-ddebs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-uca-ddebs -- pull ddeb package files for ubuntu cloud archive
+# Basic usage: pull-uca-ddebs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="uca", pull="ddebs")

pull-uca-debs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-uca-debs -- pull deb package files for ubuntu cloud archive
+# Basic usage: pull-uca-debs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="uca", pull="debs")

pull-uca-source

@@ -1,157 +1,14 @@
 #!/usr/bin/python3
 #
-# pull-uca-source -- pull a source package from Ubuntu Cloud Archive
-# Basic usage: pull-uca-source <source package> <openstack release> [version]
+# pull-uca-source -- pull source package files for ubuntu cloud archive
+# Basic usage: pull-uca-source <package name> [version|release]
 #
-# Copyright (C) 2008,      Iain Lane <iain@orangesquash.org.uk>,
-#               2010-2011, Stefano Rivera <stefanor@ubuntu.com>
-#               2016,      Corey Bryant <corey.bryant@ubuntu.com>
-#               2016,      Dan Streetman <dan.streetman@canonical.com>
-#
-# ##################################################################
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 3
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# See file /usr/share/common-licenses/GPL for more details.
-#
-# ##################################################################
+# See pull-pkg
 
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
 
-import re
-import sys
-from optparse import OptionParser
+from ubuntutools.pullpkg import PullPkg
 
-from ubuntutools.archive import UbuntuCloudArchiveSourcePackage, DownloadError
-from ubuntutools.config import UDTConfig
-from ubuntutools.lp.lpapicache import Launchpad
-from ubuntutools.lp.udtexceptions import PocketDoesNotExistError
-from ubuntutools.logger import Logger
-from ubuntutools.misc import split_release_pocket
-
-from lazr.restfulclient.errors import NotFound
-
-from launchpadlib.launchpad import Launchpad as LP
-
-
-def showOpenstackReleases(uca):
-    releases = []
-    for p in uca.ppas:
-        if re.match(r"\w*-staging", p.name):
-            releases.append(re.sub("-staging", "", p.name))
-    Logger.error("Openstack releases are:\n\t%s", ", ".join(releases))
-
-
-def getSPPH(lp, archive, package, version=None, series=None, pocket=None, try_binary=True):
-    params = {'exact_match': True, 'order_by_date': True}
-    if pocket:
-        params['pocket'] = pocket
-    if series:
-        params['distro_series'] = series()
-    elif version:
-        params['version'] = version
-    Logger.normal("checking %s version %s pocket %s", package, version, pocket)
-    spphs = archive.getPublishedSources(source_name=package, **params)
-    if spphs:
-        return spphs[0]
-    if not try_binary:
-        return None
-
-    # Didn't find any, maybe the package is a binary package name
-    if series:
-        del params['distro_series']
-        archs = lp.load(series().architectures_collection_link).entries
-        params['distro_arch_series'] = archs[0]['self_link']
-    bpphs = archive.getPublishedBinaries(binary_name=package, **params)
-    if bpphs:
-        bpph_build = lp.load(bpphs[0].build_link)
-        source_package = bpph_build.source_package_name
-        return getSPPH(lp, archive, source_package, version, series, pocket,
-                       try_binary=False)
-
-    return None
-
-
-def main():
-    usage = "Usage: %prog <package> <openstack release> [version]"
-    opt_parser = OptionParser(usage)
-    opt_parser.add_option('-d', '--download-only',
-                          dest='download_only', default=False,
-                          action='store_true',
-                          help="Do not extract the source package")
-    opt_parser.add_option('-m', '--mirror', metavar='OPENSTACK_MIRROR',
-                          dest='openstack_mirror',
-                          help='Preferred Openstack mirror (default: Launchpad)')
-    opt_parser.add_option('--no-conf',
-                          dest='no_conf', default=False, action='store_true',
-                          help="Don't read config files or environment "
-                               "variables")
-    (options, args) = opt_parser.parse_args()
-    if len(args) < 2:
-        opt_parser.error("Must specify package name and openstack release")
-
-    config = UDTConfig(options.no_conf)
-    if options.openstack_mirror is None:
-        options.openstack_mirror = config.get_value('OPENSTACK_MIRROR')
-    mirrors = []
-    if options.openstack_mirror:
-        mirrors.append(options.openstack_mirror)
-
-    # Login anonymously to LP
-    Launchpad.login_anonymously()
-    lp = LP.login_anonymously("pull-uca-source", "production")
-    uca = lp.people("ubuntu-cloud-archive")
-
-    package = str(args[0]).lower()
-    release = str(args[1]).lower()
-    version = None
-    if len(args) > 2:
-        version = str(args[2])
-
-    pocket = None
-    try:
-        (release, pocket) = split_release_pocket(release, default=None)
-    except PocketDoesNotExistError:
-        pass
-
-    try:
-        archive = uca.getPPAByName(name="%s-staging" % release)
-    except NotFound:
-        Logger.error('Archive does not exist for Openstack release: %s',
-                     release)
-        showOpenstackReleases(uca)
-        sys.exit(1)
-
-    spph = getSPPH(lp, archive, package, version, pocket=pocket)
-    if not spph:
-        Logger.error("Package %s in %s not found.", package, release)
-        sys.exit(1)
-
-    package = spph.source_package_name
-    version = spph.source_package_version
-    component = spph.component_name
-    Logger.normal('Downloading %s version %s component %s', package, version, component)
-    srcpkg = UbuntuCloudArchiveSourcePackage(release, package, version, component=component,
-                                             mirrors=mirrors)
-
-    try:
-        srcpkg.pull()
-    except DownloadError as e:
-        Logger.error('Failed to download: %s', str(e))
-        sys.exit(1)
-    if not options.download_only:
-        srcpkg.unpack()
-
-
-if __name__ == '__main__':
-    try:
-        main()
-    except KeyboardInterrupt:
-        Logger.normal('User abort.')
+if __name__ == "__main__":
+    PullPkg.main(distro="uca", pull="source")

pull-uca-udebs

@@ -0,0 +1,14 @@
+#!/usr/bin/python3
+#
+# pull-uca-udebs -- pull udeb package files for ubuntu cloud archive
+# Basic usage: pull-uca-udebs <package name> [version|release]
+#
+# See pull-pkg
+
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+from ubuntutools.pullpkg import PullPkg
+
+if __name__ == "__main__":
+    PullPkg.main(distro="uca", pull="udebs")

pyproject.toml

@@ -0,0 +1,6 @@
+[tool.black]
+line-length = 99
+
+[tool.isort]
+line_length = 99
+profile = "black"

requestbackport

@@ -14,21 +14,21 @@
 # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-from collections import defaultdict
-import optparse
-import re
+import argparse
 import sys
+from collections import defaultdict
 
 import apt
 from distro_info import UbuntuDistroInfo
 
+from ubuntutools import getLogger
 from ubuntutools.config import UDTConfig
-from ubuntutools.lp.lpapicache import Launchpad, Distribution
+from ubuntutools.lp.lpapicache import Distribution, Launchpad
 from ubuntutools.lp.udtexceptions import PackageNotFoundException
-from ubuntutools.logger import Logger
-from ubuntutools.question import (YesNoQuestion, EditBugReport,
-                                  confirmation_prompt)
-from ubuntutools.rdepends import query_rdepends, RDependsException
+from ubuntutools.question import EditBugReport, YesNoQuestion, confirmation_prompt
+from ubuntutools.rdepends import RDependsException, query_rdepends
+
+Logger = getLogger()
 
 
 class DestinationException(Exception):
@@ -38,16 +38,14 @@ class DestinationException(Exception):
 def determine_destinations(source, destination):
     ubuntu_info = UbuntuDistroInfo()
     if destination is None:
-        destination = ubuntu_info.stable()
+        destination = ubuntu_info.lts()
 
     if source not in ubuntu_info.all:
-        raise DestinationException("Source release %s does not exist" % source)
+        raise DestinationException(f"Source release {source} does not exist")
     if destination not in ubuntu_info.all:
-        raise DestinationException("Destination release %s does not exist"
-                                   % destination)
+        raise DestinationException(f"Destination release {destination} does not exist")
     if destination not in ubuntu_info.supported():
-        raise DestinationException("Destination release %s is not supported"
-                                   % destination)
+        raise DestinationException(f"Destination release {destination} is not supported")
 
     found = False
     destinations = []
@@ -75,40 +73,37 @@ def determine_destinations(source, destination):
 
 
 def disclaimer():
-    print("Ubuntu's backports are not for fixing bugs in stable releases, "
-          "but for bringing new features to older, stable releases.\n"
-          "See https://wiki.ubuntu.com/UbuntuBackports for the Ubuntu "
-          "Backports policy and processes.\n"
-          "See https://wiki.ubuntu.com/StableReleaseUpdates for the process "
-          "for fixing bugs in stable releases.")
+    print(
+        "Ubuntu's backports are not for fixing bugs in stable releases, "
+        "but for bringing new features to older, stable releases.\n"
+        "See https://wiki.ubuntu.com/UbuntuBackports for the Ubuntu "
+        "Backports policy and processes.\n"
+        "See https://wiki.ubuntu.com/StableReleaseUpdates for the process "
+        "for fixing bugs in stable releases."
+    )
     confirmation_prompt()
 
 
-def check_existing(package, destinations):
+def check_existing(package):
     """Search for possible existing bug reports"""
-    # The LP bug search is indexed, not substring:
-    query = re.findall(r'[a-z]+', package)
-    bugs = []
-    for release in destinations:
-        project = Launchpad.projects[release + '-backports']
-        bugs += project.searchTasks(omit_duplicates=True,
-                                    search_text=query,
-                                    status=["Incomplete", "New", "Confirmed",
-                                            "Triaged", "In Progress",
-                                            "Fix Committed"])
+    distro = Distribution("ubuntu")
+    srcpkg = distro.getSourcePackage(name=package.getPackageName())
+
+    bugs = srcpkg.searchTasks(
+        omit_duplicates=True,
+        search_text="[BPO]",
+        status=["Incomplete", "New", "Confirmed", "Triaged", "In Progress", "Fix Committed"],
+    )
     if not bugs:
         return
 
-    Logger.normal("There are existing bug reports that look similar to your "
-                  "request. Please check before continuing:")
+    Logger.info(
+        "There are existing bug reports that look similar to your "
+        "request. Please check before continuing:"
+    )
 
-    by_id = {}
-    for bug_task in bugs:
-        bug = bug_task.bug
-        by_id[bug.id] = bug
-
-    for id_, bug in sorted(by_id.items()):
-        Logger.normal(" * LP: #%-7i: %s  %s", bug.id, bug.title, bug.web_link)
+    for bug in sorted([bug_task.bug for bug_task in bugs], key=lambda bug: bug.id):
+        Logger.info(" * LP: #%-7i: %s  %s", bug.id, bug.title, bug.web_link)
 
     confirmation_prompt()
 
@@ -118,9 +113,9 @@ def find_rdepends(releases, published_binaries):
 
     # We want to display every pubilshed binary, even if it has no rdepends
     for binpkg in published_binaries:
-        intermediate[binpkg]
+        intermediate[binpkg]  # pylint: disable=pointless-statement
 
-    for arch in ('any', 'source'):
+    for arch in ("any", "source"):
         for release in releases:
             for binpkg in published_binaries:
                 try:
@@ -131,20 +126,20 @@ def find_rdepends(releases, published_binaries):
                 for relationship, rdeps in raw_rdeps.items():
                     for rdep in rdeps:
                         # Ignore circular deps:
-                        if rdep['Package'] in published_binaries:
+                        if rdep["Package"] in published_binaries:
                             continue
                         # arch==any queries return Reverse-Build-Deps:
-                        if arch == 'any' and rdep.get('Architectures', []) == ['source']:
+                        if arch == "any" and rdep.get("Architectures", []) == ["source"]:
                             continue
-                        intermediate[binpkg][rdep['Package']].append((release, relationship))
+                        intermediate[binpkg][rdep["Package"]].append((release, relationship))
 
     output = []
     for binpkg, rdeps in intermediate.items():
-        output += ['', binpkg, '-' * len(binpkg)]
+        output += ["", binpkg, "-" * len(binpkg)]
         for pkg, appearences in rdeps.items():
-            output += ['* %s' % pkg]
+            output += [f"* {pkg}"]
             for release, relationship in appearences:
-                output += ['  [ ] %s (%s)' % (release, relationship)]
+                output += [f"  [ ] {release} ({relationship})"]
 
     found_any = sum(len(rdeps) for rdeps in intermediate.values())
     if found_any:
@@ -159,8 +154,8 @@ def find_rdepends(releases, published_binaries):
             "package currently in the release still works with the new "
             "%(package)s installed. "
             "Reverse- Recommends, Suggests, and Enhances don't need to be "
-            "tested, and are listed for completeness-sake."
-           ] + output
+            "tested, and are listed for completeness-sake.",
+        ] + output
     else:
         output = ["No reverse dependencies"]
 
@@ -168,146 +163,164 @@ def find_rdepends(releases, published_binaries):
 
 
 def locate_package(package, distribution):
-    archive = Distribution('ubuntu').getArchive()
-    for pass_ in ('source', 'binary'):
-        try:
-            package_spph = archive.getSourcePackage(package, distribution)
-            return package_spph
-        except PackageNotFoundException as e:
-            if pass_ == 'binary':
-                Logger.error(str(e))
-                sys.exit(1)
-
+    archive = Distribution("ubuntu").getArchive()
+    try:
+        package_spph = archive.getSourcePackage(package, distribution)
+        return package_spph
+    except PackageNotFoundException as e:
         try:
             apt_pkg = apt.Cache()[package]
         except KeyError:
-            continue
+            Logger.error(str(e))
+            sys.exit(1)
         package = apt_pkg.candidate.source_name
-        Logger.normal("Binary package specified, considering its source "
-                      "package instead: %s", package)
+        Logger.info(
+            "Binary package specified, considering its source package instead: %s", package
+        )
+    return None
 
 
 def request_backport(package_spph, source, destinations):
-
     published_binaries = set()
     for bpph in package_spph.getBinaries():
         published_binaries.add(bpph.getPackageName())
 
     if not published_binaries:
-        Logger.error("%s (%s) has no published binaries in %s. ",
-                     package_spph.getPackageName(), package_spph.getVersion(),
-                     source)
-        Logger.normal("Is it stuck in bin-NEW? It can't be backported until "
-                      "the binaries have been accepted.")
+        Logger.error(
+            "%s (%s) has no published binaries in %s. ",
+            package_spph.getPackageName(),
+            package_spph.getVersion(),
+            source,
+        )
+        Logger.info(
+            "Is it stuck in bin-NEW? It can't be backported until "
+            "the binaries have been accepted."
+        )
         sys.exit(1)
 
-    testing = []
-    testing += ["You can test-build the backport in your PPA with "
-                "backportpackage:"]
-    testing += ["$ backportpackage -u ppa:<lp username>/<ppa name> "
-                "-s %s -d %s %s"
-                % (source, dest, package_spph.getPackageName())
-                for dest in destinations]
-    testing += [""]
+    testing = ["[Testing]", ""]
     for dest in destinations:
-        testing += ['* %s:' % dest]
-        testing += ["[ ] Package builds without modification"]
-        testing += ["[ ] %s installs cleanly and runs" % binary
-                    for binary in published_binaries]
+        testing += [f" * {dest.capitalize()}:"]
+        testing += ["   [ ] Package builds without modification"]
+        testing += [f"   [ ] {binary} installs cleanly and runs" for binary in published_binaries]
 
     subst = {
-        'package': package_spph.getPackageName(),
-        'version': package_spph.getVersion(),
-        'component': package_spph.getComponent(),
-        'source': package_spph.getSeriesAndPocket(),
-        'destinations': ', '.join(destinations),
+        "package": package_spph.getPackageName(),
+        "version": package_spph.getVersion(),
+        "component": package_spph.getComponent(),
+        "source": package_spph.getSeriesAndPocket(),
+        "destinations": ", ".join(destinations),
     }
-    subject = ("Please backport %(package)s %(version)s (%(component)s) "
-               "from %(source)s" % subst)
-    body = ('\n'.join(
+    subject = "[BPO] %(package)s %(version)s to %(destinations)s" % subst
+    body = (
+        "\n".join(
             [
-             "Please backport %(package)s %(version)s (%(component)s) "
-             "from %(source)s to %(destinations)s.",
-             "",
-             "Reason for the backport:",
-             "========================",
-             ">>> Enter your reasoning here <<<",
-             "",
-             "Testing:",
-             "========",
-             "Mark off items in the checklist [X] as you test them, "
-             "but please leave the checklist so that backporters can quickly "
-             "evaluate the state of testing.",
-             ""
+                "[Impact]",
+                "",
+                " * Justification for backporting the new version to the stable release.",
+                "",
+                "[Scope]",
+                "",
+                " * List the Ubuntu release you will backport from,"
+                " and the specific package version.",
+                "",
+                " * List the Ubuntu release(s) you will backport to.",
+                "",
+                "[Other Info]",
+                "",
+                " * Anything else you think is useful to include",
+                "",
             ]
             + testing
             + [""]
             + find_rdepends(destinations, published_binaries)
-            + [""]) % subst)
+            + [""]
+        )
+        % subst
+    )
 
     editor = EditBugReport(subject, body)
     editor.edit()
     subject, body = editor.get_report()
 
-    Logger.normal('The final report is:\nSummary: %s\nDescription:\n%s\n',
-                  subject, body)
+    Logger.info("The final report is:\nSummary: %s\nDescription:\n%s\n", subject, body)
     if YesNoQuestion().ask("Request this backport", "yes") == "no":
         sys.exit(1)
 
-    targets = [Launchpad.projects['%s-backports' % destination]
-               for destination in destinations]
-    bug = Launchpad.bugs.createBug(title=subject, description=body,
-                                   target=targets[0])
-    for target in targets[1:]:
-        bug.addTask(target=target)
+    distro = Distribution("ubuntu")
+    pkgname = package_spph.getPackageName()
 
-    Logger.normal("Backport request filed as %s", bug.web_link)
+    bug = Launchpad.bugs.createBug(
+        title=subject, description=body, target=distro.getSourcePackage(name=pkgname)
+    )
+
+    bug.subscribe(person=Launchpad.people["ubuntu-backporters"])
+
+    for dest in destinations:
+        series = distro.getSeries(dest)
+        try:
+            bug.addTask(target=series.getSourcePackage(name=pkgname))
+        except Exception:  # pylint: disable=broad-except
+            break
+
+    Logger.info("Backport request filed as %s", bug.web_link)
 
 
 def main():
-    parser = optparse.OptionParser('%prog [options] package')
-    parser.add_option('-d', '--destination', metavar='DEST',
-                      help='Backport to DEST release and necessary '
-                           'intermediate releases '
-                           '(default: current stable release)')
-    parser.add_option('-s', '--source', metavar='SOURCE',
-                      help='Backport from SOURCE release '
-                           '(default: current devel release)')
-    parser.add_option('-l', '--lpinstance', metavar='INSTANCE', default=None,
-                      help='Launchpad instance to connect to '
-                           '(default: production).')
-    parser.add_option('--no-conf', action='store_true',
-                      dest='no_conf', default=False,
-                      help="Don't read config files or environment variables")
-    options, args = parser.parse_args()
+    parser = argparse.ArgumentParser(usage="%(prog)s [options] package")
+    parser.add_argument(
+        "-d",
+        "--destination",
+        metavar="DEST",
+        help="Backport to DEST release and necessary "
+        "intermediate releases "
+        "(default: current LTS release)",
+    )
+    parser.add_argument(
+        "-s",
+        "--source",
+        metavar="SOURCE",
+        help="Backport from SOURCE release (default: current devel release)",
+    )
+    parser.add_argument(
+        "-l",
+        "--lpinstance",
+        metavar="INSTANCE",
+        default=None,
+        help="Launchpad instance to connect to (default: production).",
+    )
+    parser.add_argument(
+        "--no-conf",
+        action="store_true",
+        dest="no_conf",
+        default=False,
+        help="Don't read config files or environment variables",
+    )
+    parser.add_argument("package", help=argparse.SUPPRESS)
+    args = parser.parse_args()
 
-    if len(args) != 1:
-        parser.error("One (and only one) package must be specified")
-    package = args[0]
+    config = UDTConfig(args.no_conf)
 
-    config = UDTConfig(options.no_conf)
+    if args.lpinstance is None:
+        args.lpinstance = config.get_value("LPINSTANCE")
+    Launchpad.login(args.lpinstance)
 
-    if options.lpinstance is None:
-        options.lpinstance = config.get_value('LPINSTANCE')
-    Launchpad.login(options.lpinstance)
-
-    if options.source is None:
-        options.source = Distribution('ubuntu').getDevelopmentSeries().name
+    if args.source is None:
+        args.source = Distribution("ubuntu").getDevelopmentSeries().name
 
     try:
-        destinations = determine_destinations(options.source,
-                                              options.destination)
+        destinations = determine_destinations(args.source, args.destination)
     except DestinationException as e:
         Logger.error(str(e))
         sys.exit(1)
 
     disclaimer()
 
-    check_existing(package, destinations)
+    package_spph = locate_package(args.package, args.source)
 
-    package_spph = locate_package(package, options.source)
-    request_backport(package_spph, options.source, destinations)
+    check_existing(package_spph)
+    request_backport(package_spph, args.source, destinations)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

requestsync

@@ -26,18 +26,21 @@
 #
 # ##################################################################
 
-import optparse
+import argparse
 import os
 import sys
 
 from distro_info import UbuntuDistroInfo
 
+from ubuntutools import getLogger
 from ubuntutools.config import UDTConfig, ubu_email
 from ubuntutools.lp import udtexceptions
 from ubuntutools.misc import require_utf8
-from ubuntutools.question import confirmation_prompt, EditBugReport
+from ubuntutools.question import EditBugReport, confirmation_prompt
 from ubuntutools.version import Version
 
+Logger = getLogger()
+
 #
 # entry point
 #
@@ -45,178 +48,195 @@ from ubuntutools.version import Version
 
 def main():
     # Our usage options.
-    usage = ('Usage: %prog [options] '
-             '<source package> [<target release> [base version]]')
-    parser = optparse.OptionParser(usage)
+    usage = "%(prog)s [options] <source package> [<target release> [base version]]"
+    parser = argparse.ArgumentParser(usage=usage)
 
-    parser.add_option('-d', type='string',
-                      dest='dist', default='unstable',
-                      help='Debian distribution to sync from.')
-    parser.add_option('-k', type='string',
-                      dest='keyid', default=None,
-                      help='GnuPG key ID to use for signing report '
-                           '(only used when emailing the sync request).')
-    parser.add_option('-n', action='store_true',
-                      dest='newpkg', default=False,
-                      help='Whether package to sync is a new package in '
-                           'Ubuntu.')
-    parser.add_option('--email', action='store_true', default=False,
-                      help='Use a PGP-signed email for filing the sync '
-                           'request, rather than the LP API.')
-    parser.add_option('--lp', dest='deprecated_lp_flag',
-                      action='store_true', default=False,
-                      help=optparse.SUPPRESS_HELP)
-    parser.add_option('-l', '--lpinstance', metavar='INSTANCE',
-                      dest='lpinstance', default=None,
-                      help='Launchpad instance to connect to '
-                           '(default: production).')
-    parser.add_option('-s', action='store_true',
-                      dest='sponsorship', default=False,
-                      help='Force sponsorship')
-    parser.add_option('-C', action='store_true',
-                      dest='missing_changelog_ok', default=False,
-                      help='Allow changelog to be manually filled in '
-                           'when missing')
-    parser.add_option('-e', action='store_true',
-                      dest='ffe', default=False,
-                      help='Use this after FeatureFreeze for non-bug fix '
-                           'syncs, changes default subscription to the '
-                           'appropriate release team.')
-    parser.add_option('--no-conf', action='store_true',
-                      dest='no_conf', default=False,
-                      help="Don't read config files or environment variables")
-
-    (options, args) = parser.parse_args()
-
-    if not len(args):
-        parser.print_help()
-        sys.exit(1)
+    parser.add_argument(
+        "-d", dest="dist", default="unstable", help="Debian distribution to sync from."
+    )
+    parser.add_argument(
+        "-k",
+        dest="keyid",
+        default=None,
+        help="GnuPG key ID to use for signing report "
+        "(only used when emailing the sync request).",
+    )
+    parser.add_argument(
+        "-n",
+        action="store_true",
+        dest="newpkg",
+        default=False,
+        help="Whether package to sync is a new package in Ubuntu.",
+    )
+    parser.add_argument(
+        "--email",
+        action="store_true",
+        default=False,
+        help="Use a PGP-signed email for filing the sync request, rather than the LP API.",
+    )
+    parser.add_argument(
+        "--lp",
+        dest="deprecated_lp_flag",
+        action="store_true",
+        default=False,
+        help=argparse.SUPPRESS,
+    )
+    parser.add_argument(
+        "-l",
+        "--lpinstance",
+        metavar="INSTANCE",
+        dest="lpinstance",
+        default=None,
+        help="Launchpad instance to connect to (default: production).",
+    )
+    parser.add_argument(
+        "-s", action="store_true", dest="sponsorship", default=False, help="Force sponsorship"
+    )
+    parser.add_argument(
+        "-C",
+        action="store_true",
+        dest="missing_changelog_ok",
+        default=False,
+        help="Allow changelog to be manually filled in when missing",
+    )
+    parser.add_argument(
+        "-e",
+        action="store_true",
+        dest="ffe",
+        default=False,
+        help="Use this after FeatureFreeze for non-bug fix "
+        "syncs, changes default subscription to the "
+        "appropriate release team.",
+    )
+    parser.add_argument(
+        "--no-conf",
+        action="store_true",
+        dest="no_conf",
+        default=False,
+        help="Don't read config files or environment variables",
+    )
+    parser.add_argument("source_package", help=argparse.SUPPRESS)
+    parser.add_argument("release", nargs="?", help=argparse.SUPPRESS)
+    parser.add_argument("base_version", nargs="?", type=Version, help=argparse.SUPPRESS)
+    args = parser.parse_args()
 
     require_utf8()
 
-    config = UDTConfig(options.no_conf)
+    config = UDTConfig(args.no_conf)
 
-    if options.deprecated_lp_flag:
-        print("The --lp flag is now default, ignored.")
-    if options.email:
-        options.lpapi = False
+    if args.deprecated_lp_flag:
+        Logger.info("The --lp flag is now default, ignored.")
+    if args.email:
+        args.lpapi = False
     else:
-        options.lpapi = config.get_value('USE_LPAPI', default=True,
-                                         boolean=True)
-    if options.lpinstance is None:
-        options.lpinstance = config.get_value('LPINSTANCE')
+        args.lpapi = config.get_value("USE_LPAPI", default=True, boolean=True)
+    if args.lpinstance is None:
+        args.lpinstance = config.get_value("LPINSTANCE")
 
-    if options.keyid is None:
-        options.keyid = config.get_value('KEYID')
+    if args.keyid is None:
+        args.keyid = config.get_value("KEYID")
 
-    if not options.lpapi:
-        if options.lpinstance == 'production':
-            bug_mail_domain = 'bugs.launchpad.net'
-        elif options.lpinstance == 'staging':
-            bug_mail_domain = 'bugs.staging.launchpad.net'
+    if not args.lpapi:
+        if args.lpinstance == "production":
+            bug_mail_domain = "bugs.launchpad.net"
+        elif args.lpinstance == "staging":
+            bug_mail_domain = "bugs.staging.launchpad.net"
         else:
-            print('Error: Unknown launchpad instance: %s' % options.lpinstance,
-                  file=sys.stderr)
+            Logger.error("Error: Unknown launchpad instance: %s", args.lpinstance)
             sys.exit(1)
 
-    mailserver_host = config.get_value('SMTP_SERVER',
-                                       default=None,
-                                       compat_keys=['UBUSMTP', 'DEBSMTP'])
-    if not options.lpapi and not mailserver_host:
+    mailserver_host = config.get_value(
+        "SMTP_SERVER", default=None, compat_keys=["UBUSMTP", "DEBSMTP"]
+    )
+    if not args.lpapi and not mailserver_host:
         try:
-            import DNS
+            import DNS  # pylint: disable=import-outside-toplevel
+
             DNS.DiscoverNameServers()
             mxlist = DNS.mxlookup(bug_mail_domain)
             firstmx = mxlist[0]
             mailserver_host = firstmx[1]
         except ImportError:
-            print('Please install python3-dns to support Launchpad mail '
-                  'server lookup.', file=sys.stderr)
+            Logger.error("Please install python-dns to support Launchpad mail server lookup.")
             sys.exit(1)
 
-    mailserver_port = config.get_value('SMTP_PORT', default=25,
-                                       compat_keys=['UBUSMTP_PORT',
-                                                    'DEBSMTP_PORT'])
-    mailserver_user = config.get_value('SMTP_USER',
-                                       compat_keys=['UBUSMTP_USER',
-                                                    'DEBSMTP_USER'])
-    mailserver_pass = config.get_value('SMTP_PASS',
-                                       compat_keys=['UBUSMTP_PASS',
-                                                    'DEBSMTP_PASS'])
+    mailserver_port = config.get_value(
+        "SMTP_PORT", default=25, compat_keys=["UBUSMTP_PORT", "DEBSMTP_PORT"]
+    )
+    mailserver_user = config.get_value("SMTP_USER", compat_keys=["UBUSMTP_USER", "DEBSMTP_USER"])
+    mailserver_pass = config.get_value("SMTP_PASS", compat_keys=["UBUSMTP_PASS", "DEBSMTP_PASS"])
 
     # import the needed requestsync module
-    if options.lpapi:
-        from ubuntutools.requestsync.lp import (check_existing_reports,
-                                                get_debian_srcpkg,
-                                                get_ubuntu_srcpkg,
-                                                get_ubuntu_delta_changelog,
-                                                need_sponsorship, post_bug)
+    # pylint: disable=import-outside-toplevel
+    if args.lpapi:
         from ubuntutools.lp.lpapicache import Distribution, Launchpad
+        from ubuntutools.requestsync.lp import (
+            check_existing_reports,
+            get_debian_srcpkg,
+            get_ubuntu_delta_changelog,
+            get_ubuntu_srcpkg,
+            need_sponsorship,
+            post_bug,
+        )
+
         # See if we have LP credentials and exit if we don't -
         # cannot continue in this case
 
         try:
             # devel for changelogUrl()
-            Launchpad.login(service=options.lpinstance, api_version='devel')
+            Launchpad.login(service=args.lpinstance, api_version="devel")
         except IOError:
             sys.exit(1)
     else:
-        from ubuntutools.requestsync.mail import (check_existing_reports,
-                                                  get_debian_srcpkg,
-                                                  get_ubuntu_srcpkg,
-                                                  get_ubuntu_delta_changelog,
-                                                  mail_bug, need_sponsorship)
-        if not any(x in os.environ for x in ('UBUMAIL', 'DEBEMAIL', 'EMAIL')):
-            print('E: The environment variable UBUMAIL, DEBEMAIL or EMAIL '
-                  'needs to be set to let this script mail the sync request.',
-                  file=sys.stderr)
+        from ubuntutools.requestsync.mail import (
+            check_existing_reports,
+            get_debian_srcpkg,
+            get_ubuntu_delta_changelog,
+            get_ubuntu_srcpkg,
+            mail_bug,
+            need_sponsorship,
+        )
+
+        if not any(x in os.environ for x in ("UBUMAIL", "DEBEMAIL", "EMAIL")):
+            Logger.error(
+                "The environment variable UBUMAIL, DEBEMAIL or EMAIL needs "
+                "to be set to let this script mail the sync request."
+            )
             sys.exit(1)
 
-    newsource = options.newpkg
-    sponsorship = options.sponsorship
-    distro = options.dist
-    ffe = options.ffe
-    lpapi = options.lpapi
+    newsource = args.newpkg
+    sponsorship = args.sponsorship
+    distro = args.dist
+    ffe = args.ffe
+    lpapi = args.lpapi
     need_interaction = False
-    force_base_version = None
-    srcpkg = args[0]
+    srcpkg = args.source_package
 
-    if len(args) == 1:
+    if not args.release:
         if lpapi:
-            release = Distribution('ubuntu').getDevelopmentSeries().name
+            args.release = Distribution("ubuntu").getDevelopmentSeries().name
         else:
             ubu_info = UbuntuDistroInfo()
-            release = ubu_info.devel()
-        print('W: Target release missing - assuming %s' % release,
-              file=sys.stderr)
-    elif len(args) == 2:
-        release = args[1]
-    elif len(args) == 3:
-        release = args[1]
-        force_base_version = Version(args[2])
-    else:
-        print('E: Too many arguments.', file=sys.stderr)
-        parser.print_help()
-        sys.exit(1)
+            args.release = ubu_info.devel()
+        Logger.warning("Target release missing - assuming %s", args.release)
 
     # Get the current Ubuntu source package
     try:
-        ubuntu_srcpkg = get_ubuntu_srcpkg(srcpkg, release, 'Proposed')
+        ubuntu_srcpkg = get_ubuntu_srcpkg(srcpkg, args.release, "Proposed")
         ubuntu_version = Version(ubuntu_srcpkg.getVersion())
         ubuntu_component = ubuntu_srcpkg.getComponent()
         newsource = False  # override the -n flag
     except udtexceptions.PackageNotFoundException:
         ubuntu_srcpkg = None
-        ubuntu_version = Version('~')
+        ubuntu_version = Version("~")
         ubuntu_component = None  # Set after getting the Debian info
         if not newsource:
-            print(("'%s' doesn't exist in 'Ubuntu %s'.\n"
-                   "Do you want to sync a new package?")
-                  % (srcpkg, release))
+            Logger.info("'%s' doesn't exist in 'Ubuntu %s'.", srcpkg, args.release)
+            Logger.info("Do you want to sync a new package?")
             confirmation_prompt()
             newsource = True
     except udtexceptions.SeriesNotFoundException as error:
-        print("E: %s" % error, file=sys.stderr)
+        Logger.error(error)
         sys.exit(1)
 
     # Get the requested Debian source package
@@ -225,97 +245,106 @@ def main():
         debian_version = Version(debian_srcpkg.getVersion())
         debian_component = debian_srcpkg.getComponent()
     except udtexceptions.PackageNotFoundException as error:
-        print("E: %s" % error, file=sys.stderr)
+        Logger.error(error)
         sys.exit(1)
     except udtexceptions.SeriesNotFoundException as error:
-        print("E: %s" % error, file=sys.stderr)
+        Logger.error(error)
         sys.exit(1)
 
     if ubuntu_component is None:
-        if debian_component == 'main':
-            ubuntu_component = 'universe'
+        if debian_component == "main":
+            ubuntu_component = "universe"
         else:
-            ubuntu_component = 'multiverse'
+            ubuntu_component = "multiverse"
 
     # Stop if Ubuntu has already the version from Debian or a newer version
-    if (ubuntu_version >= debian_version) and options.lpapi:
+    if (ubuntu_version >= debian_version) and args.lpapi:
         # try rmadison
-        import ubuntutools.requestsync.mail
+        import ubuntutools.requestsync.mail  # pylint: disable=import-outside-toplevel
+
         try:
             debian_srcpkg = ubuntutools.requestsync.mail.get_debian_srcpkg(srcpkg, distro)
             debian_version = Version(debian_srcpkg.getVersion())
             debian_component = debian_srcpkg.getComponent()
         except udtexceptions.PackageNotFoundException as error:
-            print("E: %s" % error, file=sys.stderr)
+            Logger.error(error)
             sys.exit(1)
 
     if ubuntu_version == debian_version:
-        print('E: The versions in Debian and Ubuntu are the same already '
-              '(%s). Aborting.' % ubuntu_version, file=sys.stderr)
+        Logger.error(
+            "The versions in Debian and Ubuntu are the same already (%s). Aborting.",
+            ubuntu_version,
+        )
         sys.exit(1)
     if ubuntu_version > debian_version:
-        print(('E: The version in Ubuntu (%s) is newer than the version in '
-               'Debian (%s). Aborting.')
-              % (ubuntu_version, debian_version), file=sys.stderr)
+        Logger.error(
+            "The version in Ubuntu (%s) is newer than the version in Debian (%s). Aborting.",
+            ubuntu_version,
+            debian_version,
+        )
         sys.exit(1)
 
     # -s flag not specified - check if we do need sponsorship
     if not sponsorship:
-        sponsorship = need_sponsorship(srcpkg, ubuntu_component, release)
+        sponsorship = need_sponsorship(srcpkg, ubuntu_component, args.release)
 
     if not sponsorship and not ffe:
-        print('Consider using syncpackage(1) for syncs that do not require '
-              'feature freeze exceptions.', file=sys.stderr)
+        Logger.error(
+            "Consider using syncpackage(1) for syncs that "
+            "do not require feature freeze exceptions."
+        )
 
     # Check for existing package reports
     if not newsource:
         check_existing_reports(srcpkg)
 
     # Generate bug report
-    pkg_to_sync = ('%s %s (%s) from Debian %s (%s)'
-                   % (srcpkg, debian_version, ubuntu_component,
-                      distro, debian_component))
-    title = "Sync %s" % pkg_to_sync
+    pkg_to_sync = (
+        f"{srcpkg} {debian_version} ({ubuntu_component})"
+        f" from Debian {distro} ({debian_component})"
+    )
+    title = f"Sync {pkg_to_sync}"
     if ffe:
         title = "FFe: " + title
-    report = "Please sync %s\n\n" % pkg_to_sync
+    report = f"Please sync {pkg_to_sync}\n\n"
 
-    if 'ubuntu' in str(ubuntu_version):
+    if "ubuntu" in str(ubuntu_version):
         need_interaction = True
 
-        print('Changes have been made to the package in Ubuntu.\n'
-              'Please edit the report and give an explanation.\n'
-              'Not saving the report file will abort the request.')
-        report += ('Explanation of the Ubuntu delta and why it can be '
-                   'dropped:\n%s\n>>> ENTER_EXPLANATION_HERE <<<\n\n'
-                   % get_ubuntu_delta_changelog(ubuntu_srcpkg))
+        Logger.info("Changes have been made to the package in Ubuntu.")
+        Logger.info("Please edit the report and give an explanation.")
+        Logger.info("Not saving the report file will abort the request.")
+        report += (
+            f"Explanation of the Ubuntu delta and why it can be dropped:\n"
+            f"{get_ubuntu_delta_changelog(ubuntu_srcpkg)}\n>>> ENTER_EXPLANATION_HERE <<<\n\n"
+        )
 
     if ffe:
         need_interaction = True
 
-        print('To approve FeatureFreeze exception, you need to state\n'
-              'the reason why you feel it is necessary.\n'
-              'Not saving the report file will abort the request.')
-        report += ('Explanation of FeatureFreeze exception:\n'
-                   '>>> ENTER_EXPLANATION_HERE <<<\n\n')
+        Logger.info("To approve FeatureFreeze exception, you need to state")
+        Logger.info("the reason why you feel it is necessary.")
+        Logger.info("Not saving the report file will abort the request.")
+        report += "Explanation of FeatureFreeze exception:\n>>> ENTER_EXPLANATION_HERE <<<\n\n"
 
     if need_interaction:
         confirmation_prompt()
 
-    base_version = force_base_version or ubuntu_version
+    base_version = args.base_version or ubuntu_version
 
     if newsource:
-        report += 'All changelog entries:\n\n'
+        report += "All changelog entries:\n\n"
     else:
-        report += ('Changelog entries since current %s version %s:\n\n'
-                   % (release, ubuntu_version))
+        report += f"Changelog entries since current {args.release} version {ubuntu_version}:\n\n"
     changelog = debian_srcpkg.getChangelog(since_version=base_version)
     if not changelog:
-        if not options.missing_changelog_ok:
-            print("E: Did not retrieve any changelog entries. "
-                  "Do you need to specify '-C'? "
-                  "Was the package recently uploaded? (check "
-                  "http://packages.debian.org/changelogs/)", file=sys.stderr)
+        if not args.missing_changelog_ok:
+            Logger.error(
+                "Did not retrieve any changelog entries. "
+                "Do you need to specify '-C'? "
+                "Was the package recently uploaded? (check "
+                "http://packages.debian.org/changelogs/)"
+            )
             sys.exit(1)
         else:
             need_interaction = True
@@ -326,38 +355,51 @@ def main():
     editor.edit(optional=not need_interaction)
     title, report = editor.get_report()
 
-    if 'XXX FIXME' in report:
-        print("E: changelog boilerplate found in report, please manually add "
-              "changelog when using '-C'", file=sys.stderr)
+    if "XXX FIXME" in report:
+        Logger.error(
+            "changelog boilerplate found in report, "
+            "please manually add changelog when using '-C'"
+        )
         sys.exit(1)
 
     # bug status and bug subscriber
-    status = 'confirmed'
-    subscribe = 'ubuntu-archive'
+    status = "confirmed"
+    subscribe = "ubuntu-archive"
     if sponsorship:
-        status = 'new'
-        subscribe = 'ubuntu-sponsors'
+        status = "new"
+        subscribe = "ubuntu-sponsors"
     if ffe:
-        status = 'new'
-        subscribe = 'ubuntu-release'
+        status = "new"
+        subscribe = "ubuntu-release"
 
-    srcpkg = not newsource and srcpkg or None
+    srcpkg = None if newsource else srcpkg
     if lpapi:
         # Map status to the values expected by LP API
-        mapping = {'new': 'New', 'confirmed': 'Confirmed'}
+        mapping = {"new": "New", "confirmed": "Confirmed"}
         # Post sync request using LP API
         post_bug(srcpkg, subscribe, mapping[status], title, report)
     else:
         email_from = ubu_email(export=False)[1]
         # Mail sync request
-        mail_bug(srcpkg, subscribe, status, title, report, bug_mail_domain,
-                 options.keyid, email_from, mailserver_host, mailserver_port,
-                 mailserver_user, mailserver_pass)
+        mail_bug(
+            srcpkg,
+            subscribe,
+            status,
+            title,
+            report,
+            bug_mail_domain,
+            args.keyid,
+            email_from,
+            mailserver_host,
+            mailserver_port,
+            mailserver_user,
+            mailserver_pass,
+        )
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     try:
         main()
     except KeyboardInterrupt:
-        print("\nUser abort.")
+        Logger.error("User abort.")
         sys.exit(2)

requirements.txt

@@ -0,0 +1,8 @@
+python-debian
+python-debianbts
+dateutil
+distro-info
+httplib2
+launchpadlib
+requests
+setuptools

reverse-build-depends

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-cat >&2 <<EOF
-reverse-build-depends has been replaced by reverse-depends -b
-This script now wraps reverse-depends.
-Please use it in the future.
-
-EOF
-
-exec $(dirname $0)/reverse-depends -b "$@"

reverse-depends

@@ -14,15 +14,19 @@
 # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
 import argparse
 import sys
 
 from distro_info import DistroDataOutdated
 
-from ubuntutools.logger import Logger
-from ubuntutools.misc import (system_distribution, vendor_to_distroinfo,
-                              codename_to_distribution)
-from ubuntutools.rdepends import query_rdepends, RDependsException
+from ubuntutools import getLogger
+from ubuntutools.misc import codename_to_distribution, system_distribution, vendor_to_distroinfo
+from ubuntutools.rdepends import RDependsException, query_rdepends
+
+Logger = getLogger()
 
 DEFAULT_MAX_DEPTH = 10  # We want avoid any infinite loop...
 
@@ -32,78 +36,108 @@ def main():
     try:
         default_release = system_distro_info.devel()
     except DistroDataOutdated as e:
-        Logger.warn(e)
-        default_release = 'unstable'
+        Logger.warning(e)
+        default_release = "unstable"
 
-    description = ("List reverse-dependencies of package. "
-                   "If the package name is prefixed with src: then the "
-                   "reverse-dependencies of all the binary packages that "
-                   "the specified source package builds will be listed.")
+    description = (
+        "List reverse-dependencies of package. "
+        "If the package name is prefixed with src: then the "
+        "reverse-dependencies of all the binary packages that "
+        "the specified source package builds will be listed."
+    )
 
     parser = argparse.ArgumentParser(description=description)
-    parser.add_argument('-r', '--release', default=default_release,
-                        help='Query dependencies in RELEASE. '
-                        'Default: %s' % default_release)
-    parser.add_argument('-R', '--without-recommends', action='store_false',
-                        dest='recommends',
-                        help='Only consider Depends relationships, '
-                        'not Recommends')
-    parser.add_argument('-s', '--with-suggests', action='store_true',
-                        help='Also consider Suggests relationships')
-    parser.add_argument('-b', '--build-depends', action='store_true',
-                        help='Query build dependencies (synonym for --arch=source)')
-    parser.add_argument('-a', '--arch', default='any',
-                        help='Query dependencies in ARCH. Default: any')
-    parser.add_argument('-c', '--component', action='append',
-                        help='Only consider reverse-dependencies in COMPONENT. '
-                        'Can be specified multiple times. Default: all')
-    parser.add_argument('-l', '--list', action='store_true',
-                        help='Display a simple, machine-readable list')
-    parser.add_argument('-u', '--service-url', metavar='URL',
-                        dest='server', default=None,
-                        help='Reverse Dependencies webservice URL. '
-                        'Default: UbuntuWire')
-    parser.add_argument('-x', '--recursive', action='store_true',
-                        help='Consider to find reverse dependencies recursively.')
-    parser.add_argument('-d', '--recursive-depth', type=int,
-                        default=DEFAULT_MAX_DEPTH,
-                        help='If recusive, you can specify the depth.')
-    parser.add_argument('package')
+    parser.add_argument(
+        "-r",
+        "--release",
+        default=default_release,
+        help="Query dependencies in RELEASE. Default: %(default)s",
+    )
+    parser.add_argument(
+        "-R",
+        "--without-recommends",
+        action="store_false",
+        dest="recommends",
+        help="Only consider Depends relationships, not Recommends",
+    )
+    parser.add_argument(
+        "-s", "--with-suggests", action="store_true", help="Also consider Suggests relationships"
+    )
+    parser.add_argument(
+        "-b",
+        "--build-depends",
+        action="store_true",
+        help="Query build dependencies (synonym for --arch=source)",
+    )
+    parser.add_argument(
+        "-a", "--arch", default="any", help="Query dependencies in ARCH. Default: any"
+    )
+    parser.add_argument(
+        "-c",
+        "--component",
+        action="append",
+        help="Only consider reverse-dependencies in COMPONENT. "
+        "Can be specified multiple times. Default: all",
+    )
+    parser.add_argument(
+        "-l", "--list", action="store_true", help="Display a simple, machine-readable list"
+    )
+    parser.add_argument(
+        "-u",
+        "--service-url",
+        metavar="URL",
+        dest="server",
+        default=None,
+        help="Reverse Dependencies webservice URL. Default: UbuntuWire",
+    )
+    parser.add_argument(
+        "-x",
+        "--recursive",
+        action="store_true",
+        help="Consider to find reverse dependencies recursively.",
+    )
+    parser.add_argument(
+        "-d",
+        "--recursive-depth",
+        type=int,
+        default=DEFAULT_MAX_DEPTH,
+        help="If recusive, you can specify the depth.",
+    )
+    parser.add_argument("package")
 
     options = parser.parse_args()
 
     opts = {}
     if options.server is not None:
-        opts['server'] = options.server
+        opts["server"] = options.server
 
     # Convert unstable/testing aliases to codenames:
     distribution = codename_to_distribution(options.release)
     if not distribution:
-        parser.error('Unknown release codename %s' % options.release)
+        parser.error(f"Unknown release codename {options.release}")
     distro_info = vendor_to_distroinfo(distribution)()
     try:
-        options.release = distro_info.codename(options.release,
-                                               default=options.release)
+        options.release = distro_info.codename(options.release, default=options.release)
     except DistroDataOutdated:
-        # We already printed a warning
+        # We already logged a warning
         pass
 
     if options.build_depends:
-        options.arch = 'source'
+        options.arch = "source"
 
-    if options.arch == 'source':
+    if options.arch == "source":
         fields = [
-            'Reverse-Build-Depends',
-            'Reverse-Build-Depends-Indep',
-            'Reverse-Build-Depends-Arch',
-            'Reverse-Testsuite-Triggers',
+            "Reverse-Build-Depends",
+            "Reverse-Build-Depends-Indep",
+            "Reverse-Build-Depends-Arch",
+            "Reverse-Testsuite-Triggers",
         ]
     else:
-        fields = ['Reverse-Depends']
+        fields = ["Reverse-Depends"]
         if options.recommends:
-            fields.append('Reverse-Recommends')
+            fields.append("Reverse-Recommends")
         if options.with_suggests:
-            fields.append('Reverse-Suggests')
+            fields.append("Reverse-Suggests")
 
     def build_results(package, result, fields, component, recursive):
         try:
@@ -117,9 +151,9 @@ def main():
         if fields:
             data = {k: v for k, v in data.items() if k in fields}
         if component:
-            data = {k: [rdep for rdep in v
-                        if rdep['Component'] in component]
-                    for k, v in data.items()}
+            data = {
+                k: [rdep for rdep in v if rdep["Component"] in component] for k, v in data.items()
+            }
             data = {k: v for k, v in data.items() if v}
 
         result[package] = data
@@ -127,13 +161,16 @@ def main():
         if recursive > 0:
             for rdeps in result[package].values():
                 for rdep in rdeps:
-                    build_results(
-                        rdep['Package'], result, fields, component, recursive - 1)
+                    build_results(rdep["Package"], result, fields, component, recursive - 1)
 
     result = {}
     build_results(
-        options.package, result, fields, options.component,
-        options.recursive and options.recursive_depth or 0)
+        options.package,
+        result,
+        fields,
+        options.component,
+        options.recursive and options.recursive_depth or 0,
+    )
 
     if options.list:
         display_consise(result)
@@ -143,55 +180,62 @@ def main():
 
 def display_verbose(package, values):
     if not values:
-        print("No reverse dependencies found")
+        Logger.info("No reverse dependencies found")
         return
 
-    def print_field(field):
-        print(field)
-        print('=' * len(field))
-
-    def print_package(values, package, arch, dependency, offset=0):
-        line = '  ' * offset + '* %s' % package
+    def log_package(values, package, arch, dependency, visited, offset=0):
+        line = f"{'  ' * offset}* {package}"
         if all_archs and set(arch) != all_archs:
-            line += ' [%s]' % ' '.join(sorted(arch))
+            line += f" [{' '.join(sorted(arch))}]"
         if dependency:
             if len(line) < 30:
-                line += ' ' * (30 - len(line))
-                line += '  (for %s)' % dependency
-        print(line)
+                line += " " * (30 - len(line))
+                line += f"  (for {dependency})"
+        Logger.info(line)
+        if package in visited:
+            return
+        visited = visited.copy().add(package)
         data = values.get(package)
         if data:
             offset = offset + 1
             for rdeps in data.values():
                 for rdep in rdeps:
-                    print_package(values,
-                                  rdep['Package'],
-                                  rdep.get('Architectures', all_archs),
-                                  rdep.get('Dependency'),
-                                  offset)
+                    log_package(
+                        values,
+                        rdep["Package"],
+                        rdep.get("Architectures", all_archs),
+                        rdep.get("Dependency"),
+                        visited,
+                        offset,
+                    )
 
     all_archs = set()
     # This isn't accurate, but we make up for it by displaying what we found
     for data in values.values():
         for rdeps in data.values():
             for rdep in rdeps:
-                if 'Architectures' in rdep:
-                    all_archs.update(rdep['Architectures'])
+                if "Architectures" in rdep:
+                    all_archs.update(rdep["Architectures"])
 
     for field, rdeps in values[package].items():
-        print_field(field)
-        rdeps.sort(key=lambda x: x['Package'])
+        Logger.info("%s", field)
+        Logger.info("%s", "=" * len(field))
+        rdeps.sort(key=lambda x: x["Package"])
         for rdep in rdeps:
-            print_package(values,
-                          rdep['Package'],
-                          rdep.get('Architectures', all_archs),
-                          rdep.get('Dependency'))
-        print()
+            log_package(
+                values,
+                rdep["Package"],
+                rdep.get("Architectures", all_archs),
+                rdep.get("Dependency"),
+                {package},
+            )
+        Logger.info("")
 
     if all_archs:
-        print("Packages without architectures listed are "
-              "reverse-dependencies in: %s"
-              % ', '.join(sorted(list(all_archs))))
+        Logger.info(
+            "Packages without architectures listed are reverse-dependencies in: %s",
+            ", ".join(sorted(list(all_archs))),
+        )
 
 
 def display_consise(values):
@@ -199,10 +243,10 @@ def display_consise(values):
     for data in values.values():
         for rdeps in data.values():
             for rdep in rdeps:
-                result.add(rdep['Package'])
+                result.add(rdep["Package"])
 
-    print('\n'.join(sorted(list(result))))
+    Logger.info("\n".join(sorted(list(result))))
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

run-linters

@@ -0,0 +1,19 @@
+#!/bin/sh
+set -eu
+
+# Copyright 2023, Canonical Ltd.
+# SPDX-License-Identifier: GPL-3.0
+
+PYTHON_SCRIPTS=$(grep -l -r '^#! */usr/bin/python3$' .)
+
+echo "Running black..."
+black --check --diff . $PYTHON_SCRIPTS
+
+echo "Running isort..."
+isort --check-only --diff .
+
+echo "Running flake8..."
+flake8 --max-line-length=99 --ignore=E203,W503 . $PYTHON_SCRIPTS
+
+echo "Running pylint..."
+pylint $(find * -name '*.py') $PYTHON_SCRIPTS

running-autopkgtests

@@ -0,0 +1,81 @@
+#!/usr/bin/python3
+# -*- Mode: Python; coding: utf-8; indent-tabs-mode: nil; tab-width: 4 -*-
+
+# Authors:
+#   Andy P. Whitcroft
+#   Christian Ehrhardt
+#   Chris Peterson <chris.peterson@canonical.com>
+#
+# Copyright (C) 2024 Canonical Ltd.
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 3, as published
+# by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranties of
+# MERCHANTABILITY, SATISFACTORY QUALITY, or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program.  If not, see <http://www.gnu.org/licenses/>.
+"""Dumps a list of currently running tests in Autopkgtest"""
+
+__example__ = """
+Display first listed test running on amd64 hardware:
+  $ running-autopkgtests | grep amd64 | head -n1
+  R     0:01:40 systemd-upstream               -          focal    amd64\
+    upstream-systemd-ci/systemd-ci  - ['CFLAGS=-O0', 'DEB_BUILD_PROFILES=noudeb',\
+ 'TEST_UPSTREAM=1', 'CONFFLAGS_UPSTREAM=--werror -Dslow-tests=true',\
+ 'UPSTREAM_PULL_REQUEST=23153',\
+ 'GITHUB_STATUSES_URL=https://api.github.com/repos/\
+systemd/systemd/statuses/cfb0935923dff8050315b5dd22ce8ab06461ff0e']
+"""
+
+import sys
+from argparse import ArgumentParser, RawDescriptionHelpFormatter
+
+from ubuntutools.running_autopkgtests import get_queued, get_running
+
+
+def parse_args():
+    description = (
+        "Dumps a list of currently running and queued tests in Autopkgtest. "
+        "Pass --running to only see running tests, or --queued to only see "
+        "queued tests. Passing both will print both, which is the default behavior. "
+    )
+
+    parser = ArgumentParser(
+        prog="running-autopkgtests",
+        description=description,
+        epilog=f"example: {__example__}",
+        formatter_class=RawDescriptionHelpFormatter,
+    )
+    parser.add_argument(
+        "-r", "--running", action="store_true", help="Print runnning autopkgtests (default: true)"
+    )
+    parser.add_argument(
+        "-q", "--queued", action="store_true", help="Print queued autopkgtests (default: true)"
+    )
+
+    options = parser.parse_args()
+
+    # If neither flag was specified, default to both not neither
+    if not options.running and not options.queued:
+        options.running = True
+        options.queued = True
+
+    return options
+
+
+def main() -> int:
+    args = parse_args()
+    if args.running:
+        print(get_running())
+    if args.queued:
+        print(get_queued())
+
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

seeded-in-ubuntu

@@ -14,49 +14,53 @@
 # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+import argparse
 import collections
 import gzip
 import json
-import optparse
 import os
 import time
 import urllib.request
 
-from ubuntutools.lp.lpapicache import (Distribution, Launchpad,
-                                       PackageNotFoundException)
-from ubuntutools.logger import Logger
+from ubuntutools import getLogger
+from ubuntutools.lp.lpapicache import Distribution, Launchpad, PackageNotFoundException
 
-DATA_URL = 'http://qa.ubuntuwire.org/ubuntu-seeded-packages/seeded.json.gz'
+Logger = getLogger()
+
+DATA_URL = "http://qa.ubuntuwire.org/ubuntu-seeded-packages/seeded.json.gz"
 
 
 def load_index(url):
-    '''Download a new copy of the image contents index, if necessary,
+    """Download a new copy of the image contents index, if necessary,
     and read it.
-    '''
-    cachedir = os.path.expanduser('~/.cache/ubuntu-dev-tools')
-    fn = os.path.join(cachedir, 'seeded.json.gz')
+    """
+    cachedir = os.path.expanduser("~/.cache/ubuntu-dev-tools")
+    seeded = os.path.join(cachedir, "seeded.json.gz")
 
-    if (not os.path.isfile(fn)
-            or time.time() - os.path.getmtime(fn) > 60 * 60 * 2):
+    if not os.path.isfile(seeded) or time.time() - os.path.getmtime(seeded) > 60 * 60 * 2:
         if not os.path.isdir(cachedir):
             os.makedirs(cachedir)
-        urllib.request.urlretrieve(url, fn)
+        urllib.request.urlretrieve(url, seeded)
 
     try:
-        with gzip.open(fn, 'r') as f:
+        with gzip.open(seeded, "r") as f:
             return json.load(f)
-    except Exception as e:
-        Logger.error("Unable to parse seed data: %s. "
-                     "Deleting cached data, please try again.",
-                     str(e))
-        os.unlink(fn)
+    except Exception as e:  # pylint: disable=broad-except
+        Logger.error(
+            "Unable to parse seed data: %s. Deleting cached data, please try again.", str(e)
+        )
+        os.unlink(seeded)
+    return None
 
 
 def resolve_binaries(sources):
-    '''Return a dict of source:binaries for all binary packages built by
+    """Return a dict of source:binaries for all binary packages built by
     sources
-    '''
-    archive = Distribution('ubuntu').getArchive()
+    """
+    archive = Distribution("ubuntu").getArchive()
     binaries = {}
     for source in sources:
         try:
@@ -64,80 +68,84 @@ def resolve_binaries(sources):
         except PackageNotFoundException as e:
             Logger.error(str(e))
             continue
-        binaries[source] = sorted(set(bpph.getPackageName()
-                                      for bpph in spph.getBinaries()))
+        binaries[source] = sorted(set(bpph.getPackageName() for bpph in spph.getBinaries()))
 
     return binaries
 
 
 def present_on(appearences):
-    '''Format a list of (flavor, type) tuples into a human-readable string'''
+    """Format a list of (flavor, type) tuples into a human-readable string"""
     present = collections.defaultdict(set)
     for flavor, type_ in appearences:
         present[flavor].add(type_)
     for flavor, types in present.items():
         if len(types) > 1:
-            types.discard('supported')
-    output = ['  %s: %s' % (flavor, ', '.join(sorted(types)))
-              for flavor, types in present.items()]
+            types.discard("supported")
+    output = [f"  {flavor}: {', '.join(sorted(types))}" for flavor, types in present.items()]
     output.sort()
-    return '\n'.join(output)
+    return "\n".join(output)
 
 
 def output_binaries(index, binaries):
-    '''Print binaries found in index'''
+    """Print binaries found in index"""
     for binary in binaries:
         if binary in index:
-            print("%s is seeded in:" % binary)
-            print(present_on(index[binary]))
+            Logger.info("%s is seeded in:", binary)
+            Logger.info(present_on(index[binary]))
         else:
-            print("%s is not seeded (and may not exist)." % binary)
+            Logger.info("%s is not seeded (and may not exist).", binary)
 
 
 def output_by_source(index, by_source):
-    '''Print binaries found in index. Grouped by source'''
+    """Logger.Info(binaries found in index. Grouped by source"""
     for source, binaries in by_source.items():
         seen = False
         if not binaries:
-            print("Status unknown: No binary packages built by the latest "
-                  "%s.\nTry again using -b and the expected binary packages."
-                  % source)
+            Logger.info(
+                "Status unknown: No binary packages built by the latest "
+                "%s.\nTry again using -b and the expected binary packages.",
+                source,
+            )
             continue
         for binary in binaries:
             if binary in index:
                 seen = True
-                print("%s (from %s) is seeded in:" % (binary, source))
-                print(present_on(index[binary]))
+                Logger.info("%s (from %s) is seeded in:", binary, source)
+                Logger.info(present_on(index[binary]))
         if not seen:
-            print("%s's binaries are not seeded." % source)
+            Logger.info("%s's binaries are not seeded.", source)
 
 
 def main():
-    '''Query which images the specified packages are on'''
-    parser = optparse.OptionParser('%prog [options] package...')
-    parser.add_option('-b', '--binary',
-                      default=False, action='store_true',
-                      help="Binary packages are being specified, "
-                           "not source packages (fast)")
-    parser.add_option('-u', '--data-url', metavar='URL',
-                      default=DATA_URL,
-                      help='URL for the seeded packages index. '
-                           'Default: UbuntuWire')
-    options, args = parser.parse_args()
-
-    if len(args) < 1:
-        parser.error("At least one package must be specified")
+    """Query which images the specified packages are on"""
+    parser = argparse.ArgumentParser(usage="%(prog)s [options] package...")
+    parser.add_argument(
+        "-b",
+        "--binary",
+        default=False,
+        action="store_true",
+        help="Binary packages are being specified, not source packages (fast)",
+    )
+    parser.add_argument(
+        "-u",
+        "--data-url",
+        metavar="URL",
+        default=DATA_URL,
+        help="URL for the seeded packages index. Default: UbuntuWire",
+    )
+    parser.add_argument("packages", metavar="package", nargs="+", help=argparse.SUPPRESS)
+    args = parser.parse_args()
 
     # Login anonymously to LP
     Launchpad.login_anonymously()
 
-    index = load_index(options.data_url)
-    if options.binary:
-        output_binaries(index, args)
+    index = load_index(args.data_url)
+    if args.binary:
+        output_binaries(index, args.packages)
     else:
-        binaries = resolve_binaries(args)
+        binaries = resolve_binaries(args.packages)
         output_by_source(index, binaries)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

setup-packaging-environment

@@ -104,7 +104,7 @@ echo "In order to do packaging work, you'll need a minimal set of packages."
 echo "Those, together with other packages which, though optional, have proven"
 echo "to be useful, will now be installed."
 echo
-sudo apt-get install ubuntu-dev-tools devscripts debhelper cdbs patchutils pbuilder build-essential
+sudo apt-get install ubuntu-dev-tools devscripts debhelper patchutils pbuilder build-essential
 separator2
 
 echo "Enabling the source repository"

setup.py

@@ -1,70 +1,100 @@
 #!/usr/bin/python3
 
-from setuptools import setup
 import glob
-import os
+import pathlib
 import re
 
-# look/set what version we have
-changelog = "debian/changelog"
-if os.path.exists(changelog):
-    head = open(changelog, 'r', encoding='utf-8').readline()
+from setuptools import setup
+
+
+def get_debian_version() -> str:
+    """Look what Debian version we have."""
+    changelog = pathlib.Path(__file__).parent / "debian" / "changelog"
+    with changelog.open("r", encoding="utf-8") as changelog_f:
+        head = changelog_f.readline()
     match = re.compile(r".*\((.*)\).*").match(head)
-    if match:
-        version = match.group(1)
+    if not match:
+        raise ValueError(f"Failed to extract Debian version from '{head}'.")
+    return match.group(1)
+
+
+def make_pep440_compliant(version: str) -> str:
+    """Convert the version into a PEP440 compliant version."""
+    public_version_re = re.compile(r"^([0-9][0-9.]*(?:(?:a|b|rc|.post|.dev)[0-9]+)*)\+?")
+    _, public, local = public_version_re.split(version, maxsplit=1)
+    if not local:
+        return version
+    sanitized_local = re.sub("[+~]+", ".", local).strip(".")
+    pep440_version = f"{public}+{sanitized_local}"
+    assert re.match("^[a-zA-Z0-9.]+$", sanitized_local), f"'{pep440_version}' not PEP440 compliant"
+    return pep440_version
+
 
 scripts = [
-    'backportpackage',
-    'bitesize',
-    'check-mir',
-    'check-symbols',
-    'dch-repeat',
-    'grab-merge',
-    'grep-merges',
-    'hugdaylist',
-    'import-bug-from-debian',
-    'merge-changelog',
-    'mk-sbuild',
-    'pbuilder-dist',
-    'pbuilder-dist-simple',
-    'pull-debian-debdiff',
-    'pull-debian-source',
-    'pull-lp-source',
-    'pull-revu-source',
-    'pull-uca-source',
-    'requestbackport',
-    'requestsync',
-    'reverse-build-depends',
-    'reverse-depends',
-    'seeded-in-ubuntu',
-    'setup-packaging-environment',
-    'sponsor-patch',
-    'submittodebian',
-    'syncpackage',
-    'ubuntu-build',
-    'ubuntu-iso',
-    'ubuntu-upload-permission',
-    'update-maintainer',
+    "backportpackage",
+    "check-mir",
+    "check-symbols",
+    "dch-repeat",
+    "grab-merge",
+    "grep-merges",
+    "import-bug-from-debian",
+    "lp-bitesize",
+    "merge-changelog",
+    "mk-sbuild",
+    "pbuilder-dist",
+    "pbuilder-dist-simple",
+    "pm-helper",
+    "pull-pkg",
+    "pull-debian-debdiff",
+    "pull-debian-source",
+    "pull-debian-debs",
+    "pull-debian-ddebs",
+    "pull-debian-udebs",
+    "pull-lp-source",
+    "pull-lp-debs",
+    "pull-lp-ddebs",
+    "pull-lp-udebs",
+    "pull-ppa-source",
+    "pull-ppa-debs",
+    "pull-ppa-ddebs",
+    "pull-ppa-udebs",
+    "pull-uca-source",
+    "pull-uca-debs",
+    "pull-uca-ddebs",
+    "pull-uca-udebs",
+    "requestbackport",
+    "requestsync",
+    "reverse-depends",
+    "running-autopkgtests",
+    "seeded-in-ubuntu",
+    "setup-packaging-environment",
+    "sponsor-patch",
+    "submittodebian",
+    "syncpackage",
+    "ubuntu-build",
+    "ubuntu-iso",
+    "ubuntu-upload-permission",
+    "update-maintainer",
 ]
 data_files = [
-    ('share/bash-completion/completions', glob.glob("bash_completion/*")),
-    ('share/man/man1', glob.glob("doc/*.1")),
-    ('share/man/man5', glob.glob("doc/*.5")),
-    ('share/ubuntu-dev-tools', ['enforced-editing-wrapper']),
+    ("share/bash-completion/completions", glob.glob("bash_completion/*")),
+    ("share/man/man1", glob.glob("doc/*.1")),
+    ("share/man/man5", glob.glob("doc/*.5")),
+    ("share/ubuntu-dev-tools", ["enforced-editing-wrapper"]),
 ]
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     setup(
-        name='ubuntu-dev-tools',
-        version=version,
+        name="ubuntu-dev-tools",
+        version=make_pep440_compliant(get_debian_version()),
         scripts=scripts,
         packages=[
-            'ubuntutools',
-            'ubuntutools/lp',
-            'ubuntutools/requestsync',
-            'ubuntutools/sponsor_patch',
-            'ubuntutools/test',
+            "ubuntutools",
+            "ubuntutools/lp",
+            "ubuntutools/requestsync",
+            "ubuntutools/sponsor_patch",
+            "ubuntutools/test",
         ],
         data_files=data_files,
-        test_suite='ubuntutools.test.discover',
+        test_suite="ubuntutools.test",
     )

sponsor-patch

@@ -14,119 +14,153 @@
 # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-import optparse
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+import argparse
+import logging
 import os
 import shutil
 import sys
 import tempfile
 
+from ubuntutools import getLogger
 from ubuntutools.builder import get_builder
 from ubuntutools.config import UDTConfig
-from ubuntutools.logger import Logger
-from ubuntutools.sponsor_patch.sponsor_patch import sponsor_patch, check_dependencies
+from ubuntutools.sponsor_patch.sponsor_patch import check_dependencies, sponsor_patch
+
+Logger = getLogger()
 
 
 def parse(script_name):
     """Parse the command line parameters."""
-    usage = ("%s [options] <bug number>\n" % (script_name)
-             + "One of --upload, --workdir, or --sponsor must be specified.")
-    epilog = "See %s(1) for more info." % (script_name)
-    parser = optparse.OptionParser(usage=usage, epilog=epilog)
+    usage = (
+        "%(prog)s [options] <bug number>\n"
+        "One of --upload, --workdir, or --sponsor must be specified."
+    )
+    epilog = f"See {script_name}(1) for more info."
+    parser = argparse.ArgumentParser(usage=usage, epilog=epilog)
 
-    parser.add_option("-b", "--build", dest="build",
-                      help="Build the package with the specified builder.",
-                      action="store_true", default=False)
-    parser.add_option("-B", "--builder", dest="builder", default=None,
-                      help="Specify the package builder (default pbuilder)")
-    parser.add_option("-e", "--edit",
-                      help="launch sub-shell to allow editing of the patch",
-                      dest="edit", action="store_true", default=False)
-    parser.add_option("-k", "--key", dest="keyid", default=None,
-                      help="Specify the key ID to be used for signing.")
-    parser.add_option("-l", "--lpinstance", dest="lpinstance", default=None,
-                      help="Launchpad instance to connect to "
-                           "(default: production)",
-                      metavar="INSTANCE")
-    parser.add_option("--no-conf", dest="no_conf", default=False,
-                      help="Don't read config files or environment variables.",
-                      action="store_true")
-    parser.add_option("-s", "--sponsor", help="sponsoring; equals -b -u ubuntu",
-                      dest="sponsoring", action="store_true", default=False)
-    parser.add_option("-u", "--upload", dest="upload", default=None,
-                      help="Specify an upload destination (default none).")
-    parser.add_option("-U", "--update", dest="update", default=False,
-                      action="store_true",
-                      help="Update the build environment before building.")
-    parser.add_option("-v", "--verbose", help="print more information",
-                      dest="verbose", action="store_true", default=False)
-    parser.add_option("-w", "--workdir", dest="workdir", default=None,
-                      help="Specify a working directory (default is a "
-                           "temporary directory, deleted afterwards).")
+    parser.add_argument(
+        "-b",
+        "--build",
+        dest="build",
+        help="Build the package with the specified builder.",
+        action="store_true",
+    )
+    parser.add_argument(
+        "-B", "--builder", dest="builder", help="Specify the package builder (default pbuilder)"
+    )
+    parser.add_argument(
+        "-e",
+        "--edit",
+        help="launch sub-shell to allow editing of the patch",
+        dest="edit",
+        action="store_true",
+    )
+    parser.add_argument(
+        "-k", "--key", dest="keyid", help="Specify the key ID to be used for signing."
+    )
+    parser.add_argument(
+        "-l",
+        "--lpinstance",
+        dest="lpinstance",
+        help="Launchpad instance to connect to (default: production)",
+        metavar="INSTANCE",
+    )
+    parser.add_argument(
+        "--no-conf",
+        dest="no_conf",
+        help="Don't read config files or environment variables.",
+        action="store_true",
+    )
+    parser.add_argument(
+        "-s",
+        "--sponsor",
+        help="sponsoring; equals -b -u ubuntu",
+        dest="sponsoring",
+        action="store_true",
+    )
+    parser.add_argument(
+        "-u", "--upload", dest="upload", help="Specify an upload destination (default none)."
+    )
+    parser.add_argument(
+        "-U",
+        "--update",
+        dest="update",
+        action="store_true",
+        help="Update the build environment before building.",
+    )
+    parser.add_argument(
+        "-v", "--verbose", help="print more information", dest="verbose", action="store_true"
+    )
+    parser.add_argument(
+        "-w",
+        "--workdir",
+        dest="workdir",
+        help="Specify a working directory (default is a "
+        "temporary directory, deleted afterwards).",
+    )
+    parser.add_argument("bug_number", type=int, help=argparse.SUPPRESS)
 
-    (options, args) = parser.parse_args()
-    Logger.set_verbosity(options.verbose)
+    args = parser.parse_args()
+    if args.verbose:
+        Logger.setLevel(logging.DEBUG)
     check_dependencies()
 
-    if len(args) == 0:
-        Logger.error("No bug number specified.")
-        sys.exit(1)
-    elif len(args) > 1:
-        Logger.error("Multiple bug numbers specified: %s" % (", ".join(args)))
-        sys.exit(1)
+    config = UDTConfig(args.no_conf)
+    if args.builder is None:
+        args.builder = config.get_value("BUILDER")
+    if args.lpinstance is None:
+        args.lpinstance = config.get_value("LPINSTANCE")
+    if not args.update:
+        args.update = config.get_value("UPDATE_BUILDER", boolean=True)
+    if args.workdir is None:
+        args.workdir = config.get_value("WORKDIR")
+    if args.keyid is None:
+        args.keyid = config.get_value("KEYID")
 
-    bug_number = args[0]
-    if bug_number.isdigit():
-        bug_number = int(bug_number)
-    else:
-        Logger.error("Invalid bug number specified: %s" % (bug_number))
-        sys.exit(1)
+    if args.sponsoring:
+        args.build = True
+        args.upload = "ubuntu"
 
-    config = UDTConfig(options.no_conf)
-    if options.builder is None:
-        options.builder = config.get_value("BUILDER")
-    if options.lpinstance is None:
-        options.lpinstance = config.get_value("LPINSTANCE")
-    if not options.update:
-        options.update = config.get_value("UPDATE_BUILDER", boolean=True)
-    if options.workdir is None:
-        options.workdir = config.get_value("WORKDIR")
-    if options.keyid is None:
-        options.keyid = config.get_value("KEYID")
-
-    if options.sponsoring:
-        options.build = True
-        options.upload = "ubuntu"
-
-    return (options, bug_number)
+    return args
 
 
 def main():
     script_name = os.path.basename(sys.argv[0])
-    (options, bug_number) = parse(script_name)
+    args = parse(script_name)
 
-    builder = get_builder(options.builder)
+    builder = get_builder(args.builder)
     if not builder:
         sys.exit(1)
 
-    if not options.upload and not options.workdir:
-        Logger.error("Please specify either a working directory or an upload "
-                     "target!")
+    if not args.upload and not args.workdir:
+        Logger.error("Please specify either a working directory or an upload target!")
         sys.exit(1)
 
-    if options.workdir is None:
-        workdir = tempfile.mkdtemp(prefix=script_name+"-")
+    if args.workdir is None:
+        workdir = tempfile.mkdtemp(prefix=script_name + "-")
     else:
-        workdir = options.workdir
+        workdir = args.workdir
 
     try:
-        sponsor_patch(bug_number, options.build, builder, options.edit,
-                      options.keyid, options.lpinstance, options.update,
-                      options.upload, workdir)
+        sponsor_patch(
+            args.bug_number,
+            args.build,
+            builder,
+            args.edit,
+            args.keyid,
+            args.lpinstance,
+            args.update,
+            args.upload,
+            workdir,
+        )
     except KeyboardInterrupt:
-        print("\nUser abort.")
+        Logger.error("User abort.")
         sys.exit(2)
     finally:
-        if options.workdir is None:
+        if args.workdir is None:
             shutil.rmtree(workdir)
 
 

submittodebian

@@ -22,27 +22,36 @@
 #
 # ##################################################################
 
-import optparse
+"""Submit the Ubuntu changes in a package to Debian.
+
+Run inside an unpacked Ubuntu source package.
+"""
+
+import argparse
 import os
 import re
 import shutil
 import sys
-from subprocess import call, check_call, Popen, PIPE
+from subprocess import DEVNULL, PIPE, Popen, call, check_call, run
 from tempfile import mkdtemp
 
 from debian.changelog import Changelog
-from distro_info import UbuntuDistroInfo, DistroDataOutdated
+from distro_info import DistroDataOutdated, UbuntuDistroInfo
 
+from ubuntutools import getLogger
 from ubuntutools.config import ubu_email
-from ubuntutools.question import YesNoQuestion, EditFile
-from ubuntutools.update_maintainer import update_maintainer, restore_maintainer
+from ubuntutools.question import EditFile, YesNoQuestion
+from ubuntutools.update_maintainer import restore_maintainer, update_maintainer
+
+Logger = getLogger()
 
 
 def get_most_recent_debian_version(changelog):
     for block in changelog:
         version = block.version.full_version
-        if not re.search('(ubuntu|build)', version):
+        if not re.search("(ubuntu|build)", version):
             return version
+    return None
 
 
 def get_bug_body(changelog):
@@ -60,19 +69,20 @@ In Ubuntu, the attached patch was applied to achieve the following:
 %s
 
 Thanks for considering the patch.
-""" % ("\n".join([a for a in entry.changes()]))
+""" % (
+        "\n".join(entry.changes())
+    )
     return msg
 
 
 def build_source_package():
-    if os.path.isdir('.bzr'):
-        cmd = ['bzr', 'bd', '--builder=dpkg-buildpackage', '-S',
-               '--', '-uc', '-us', '-nc']
+    if os.path.isdir(".bzr"):
+        cmd = ["bzr", "bd", "--builder=dpkg-buildpackage", "-S", "--", "-uc", "-us", "-nc"]
     else:
-        cmd = ['dpkg-buildpackage', '-S', '-uc', '-us', '-nc']
+        cmd = ["dpkg-buildpackage", "-S", "-uc", "-us", "-nc"]
     env = os.environ.copy()
     # Unset DEBEMAIL in case there's an @ubuntu.com e-mail address
-    env.pop('DEBEMAIL', None)
+    env.pop("DEBEMAIL", None)
     check_call(cmd, env=env)
 
 
@@ -83,35 +93,35 @@ def gen_debdiff(tmpdir, changelog):
     newver = next(changelog_it).version
     oldver = next(changelog_it).version
 
-    debdiff = os.path.join(tmpdir, '%s_%s.debdiff' % (pkg, newver))
+    debdiff = os.path.join(tmpdir, f"{pkg}_{newver}.debdiff")
 
-    devnull = open('/dev/null', 'w')
-    diff_cmd = ['bzr', 'diff', '-r', 'tag:' + str(oldver)]
-    if call(diff_cmd, stdout=devnull, stderr=devnull) == 1:
-        print("Extracting bzr diff between %s and %s" % (oldver, newver))
+    diff_cmd = ["bzr", "diff", "-r", "tag:" + str(oldver)]
+    if call(diff_cmd, stdout=DEVNULL, stderr=DEVNULL) == 1:
+        Logger.info("Extracting bzr diff between %s and %s", oldver, newver)
     else:
         if oldver.epoch is not None:
-            oldver = str(oldver)[str(oldver).index(":") + 1:]
+            oldver = str(oldver)[str(oldver).index(":") + 1 :]
         if newver.epoch is not None:
-            newver = str(newver)[str(newver).index(":") + 1:]
+            newver = str(newver)[str(newver).index(":") + 1 :]
 
-        olddsc = '../%s_%s.dsc' % (pkg, oldver)
-        newdsc = '../%s_%s.dsc' % (pkg, newver)
+        olddsc = f"../{pkg}_{oldver}.dsc"
+        newdsc = f"../{pkg}_{newver}.dsc"
 
         check_file(olddsc)
         check_file(newdsc)
 
-        print("Generating debdiff between %s and %s" % (oldver, newver))
-        diff_cmd = ['debdiff', olddsc, newdsc]
+        Logger.info("Generating debdiff between %s and %s", oldver, newver)
+        diff_cmd = ["debdiff", olddsc, newdsc]
 
-    diff = Popen(diff_cmd, stdout=PIPE)
-    debdiff_f = open(debdiff, 'w')
-    filterdiff = Popen(['filterdiff', '-x', '*changelog*'],
-                       stdin=diff.stdout, stdout=debdiff_f)
-    diff.stdout.close()
-    filterdiff.wait()
-    debdiff_f.close()
-    devnull.close()
+    with Popen(diff_cmd, stdout=PIPE, encoding="utf-8") as diff:
+        with open(debdiff, "w", encoding="utf-8") as debdiff_f:
+            run(
+                ["filterdiff", "-x", "*changelog*"],
+                check=False,
+                stdin=diff.stdout,
+                stdout=debdiff_f,
+                encoding="utf-8",
+            )
 
     return debdiff
 
@@ -119,88 +129,95 @@ def gen_debdiff(tmpdir, changelog):
 def check_file(fname, critical=True):
     if os.path.exists(fname):
         return fname
-    else:
-        if not critical:
-            return False
-        print("Couldn't find «%s».\n" % fname)
-        sys.exit(1)
+    if not critical:
+        return False
+    Logger.info("Couldn't find «%s».\n", fname)
+    sys.exit(1)
 
 
 def submit_bugreport(body, debdiff, deb_version, changelog):
     try:
         devel = UbuntuDistroInfo().devel()
     except DistroDataOutdated as e:
-        print(str(e))
-        devel = ''
+        Logger.info(str(e))
+        devel = ""
 
-    if os.path.dirname(sys.argv[0]).startswith('/usr/bin'):
-        editor_path = '/usr/share/ubuntu-dev-tools'
+    if os.path.dirname(sys.argv[0]).startswith("/usr/bin"):
+        editor_path = "/usr/share/ubuntu-dev-tools"
     else:
         editor_path = os.path.dirname(sys.argv[0])
     env = dict(os.environ.items())
-    if 'EDITOR' in env:
-        env['UDT_EDIT_WRAPPER_EDITOR'] = env['EDITOR']
-    if 'VISUAL' in env:
-        env['UDT_EDIT_WRAPPER_VISUAL'] = env['VISUAL']
-    env['EDITOR'] = os.path.join(editor_path, 'enforced-editing-wrapper')
-    env['VISUAL'] = os.path.join(editor_path, 'enforced-editing-wrapper')
-    env['UDT_EDIT_WRAPPER_TEMPLATE_RE'] = (
-            '.*REPLACE THIS WITH ACTUAL INFORMATION.*')
-    env['UDT_EDIT_WRAPPER_FILE_DESCRIPTION'] = 'bug report'
+    if "EDITOR" in env:
+        env["UDT_EDIT_WRAPPER_EDITOR"] = env["EDITOR"]
+    if "VISUAL" in env:
+        env["UDT_EDIT_WRAPPER_VISUAL"] = env["VISUAL"]
+    env["EDITOR"] = os.path.join(editor_path, "enforced-editing-wrapper")
+    env["VISUAL"] = os.path.join(editor_path, "enforced-editing-wrapper")
+    env["UDT_EDIT_WRAPPER_TEMPLATE_RE"] = ".*REPLACE THIS WITH ACTUAL INFORMATION.*"
+    env["UDT_EDIT_WRAPPER_FILE_DESCRIPTION"] = "bug report"
 
     # In external mua mode, attachments are lost (Reportbug bug: #679907)
     internal_mua = True
-    for cfgfile in ('/etc/reportbug.conf', '~/.reportbugrc'):
+    for cfgfile in ("/etc/reportbug.conf", "~/.reportbugrc"):
         cfgfile = os.path.expanduser(cfgfile)
         if not os.path.exists(cfgfile):
             continue
-        with open(cfgfile, 'r') as f:
+        with open(cfgfile, "r", encoding="utf-8") as f:
             for line in f:
                 line = line.strip()
-                if line in ('gnus', 'mutt', 'nmh') or line.startswith('mua '):
+                if line in ("gnus", "mutt", "nmh") or line.startswith("mua "):
                     internal_mua = False
                     break
 
-    cmd = ('reportbug',
-           '--no-check-available',
-           '--no-check-installed',
-           '--pseudo-header', 'User: ubuntu-devel@lists.ubuntu.com',
-           '--pseudo-header', 'Usertags: origin-ubuntu %s ubuntu-patch'
-                              % devel,
-           '--tag', 'patch',
-           '--bts', 'debian',
-           '--include', body,
-           '--attach' if internal_mua else '--include', debdiff,
-           '--package-version', deb_version,
-           changelog.package)
+    cmd = (
+        "reportbug",
+        "--no-check-available",
+        "--no-check-installed",
+        "--pseudo-header",
+        "User: ubuntu-devel@lists.ubuntu.com",
+        "--pseudo-header",
+        f"Usertags: origin-ubuntu {devel} ubuntu-patch",
+        "--tag",
+        "patch",
+        "--bts",
+        "debian",
+        "--include",
+        body,
+        "--attach" if internal_mua else "--include",
+        debdiff,
+        "--package-version",
+        deb_version,
+        changelog.package,
+    )
     check_call(cmd, env=env)
 
 
 def check_reportbug_config():
-    fn = os.path.expanduser('~/.reportbugrc')
-    if os.path.exists(fn):
+    reportbugrc_filename = os.path.expanduser("~/.reportbugrc")
+    if os.path.exists(reportbugrc_filename):
         return
     email = ubu_email()[1]
-    reportbugrc = """# Reportbug configuration generated by submittodebian(1)
+    reportbugrc = f"""# Reportbug configuration generated by submittodebian(1)
 # See reportbug.conf(5) for the configuration file format.
 
 # Use Debian's reportbug SMTP Server:
 # Note: it's limited to 5 connections per hour, and cannot CC you at submission
 # time. See /usr/share/doc/reportbug/README.Users.gz for more details.
 smtphost reportbug.debian.org:587
-header "X-Debbugs-CC: %s"
+header "X-Debbugs-CC: {email}"
 no-cc
 
 # Use GMail's SMTP Server:
 #smtphost smtp.googlemail.com:587
 #smtpuser "<your address>@gmail.com"
 #smtptls
-""" % email
+"""
 
-    with open(fn, 'w') as f:
+    with open(reportbugrc_filename, "w", encoding="utf-8") as f:
         f.write(reportbugrc)
 
-    print("""\
+    Logger.info(
+        """\
 You have not configured reportbug. Assuming this is the first time you have
 used it. Writing a ~/.reportbugrc that will use Debian's mail server, and CC
 the bug to you at <%s>
@@ -211,41 +228,43 @@ the bug to you at <%s>
 
 If this is not correct, please exit now and edit ~/.reportbugrc or run
 reportbug --configure for its configuration wizard.
-""" % (email, reportbugrc.strip()))
+""",
+        email,
+        reportbugrc.strip(),
+    )
 
     if YesNoQuestion().ask("Continue submitting this bug", "yes") == "no":
         sys.exit(1)
 
 
 def main():
-    description = 'Submit the Ubuntu changes in a package to Debian. ' + \
-                  'Run inside an unpacked Ubuntu source package.'
-    parser = optparse.OptionParser(description=description)
+    parser = argparse.ArgumentParser(description=__doc__)
     parser.parse_args()
 
-    if not os.path.exists('/usr/bin/reportbug'):
-        print("This utility requires the «reportbug» package, which isn't "
-              "currently installed.")
+    if not os.path.exists("/usr/bin/reportbug"):
+        Logger.error(
+            "This utility requires the «reportbug» package, which isn't currently installed."
+        )
         sys.exit(1)
 
     check_reportbug_config()
-    changelog_file = (check_file('debian/changelog', critical=False) or
-                      check_file('../debian/changelog'))
-    with open(changelog_file) as f:
+    changelog_file = check_file("debian/changelog", critical=False) or check_file(
+        "../debian/changelog"
+    )
+    with open(changelog_file, encoding="utf-8") as f:
         changelog = Changelog(f.read())
 
     deb_version = get_most_recent_debian_version(changelog)
     bug_body = get_bug_body(changelog)
 
     tmpdir = mkdtemp()
-    body = os.path.join(tmpdir, 'bug_body')
-    fp = open(body, 'w')
-    fp.write(bug_body.encode('utf-8'))
-    fp.close()
+    body = os.path.join(tmpdir, "bug_body")
+    with open(body, "wb") as f:
+        f.write(bug_body.encode("utf-8"))
 
-    restore_maintainer('debian')
+    restore_maintainer("debian")
     build_source_package()
-    update_maintainer('debian')
+    update_maintainer("debian")
 
     debdiff = gen_debdiff(tmpdir, changelog)
 
@@ -253,7 +272,7 @@ def main():
     # reverted in the most recent build
     build_source_package()
 
-    EditFile(debdiff, 'debdiff').edit(optional=True)
+    EditFile(debdiff, "debdiff").edit(optional=True)
 
     submit_bugreport(body, debdiff, deb_version, changelog)
     os.unlink(body)
@@ -261,5 +280,5 @@ def main():
     shutil.rmtree(tmpdir)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

test-data/blank-example/content

@@ -1 +0,0 @@
-upstream

test-data/blank-example/debian/compat

@@ -1 +0,0 @@
-7

test-data/blank-example/debian/control

@@ -1,12 +0,0 @@
-Source: example
-Section: misc
-Priority: extra
-Maintainer: Ubuntu Developers <ubuntu-dev-team@lists.alioth.debian.org>
-Build-Depends: debhelper (>= 7.0.50~)
-Standards-Version: 3.9.1
-
-Package: example
-Architecture: all
-Depends: ${misc:Depends}, ${shlibs:Depends}
-Description: Example package for testing purposes
- An example package used by the test suite. Useless.

test-data/blank-example/debian/copyright

@@ -1,17 +0,0 @@
-Format: http://svn.debian.org/wsvn/dep/web/deps/dep5.mdwn?op=file&rev=152
-Source: https://launchpad.net/ubuntu-dev-tools
-
-Files: *
-Copyright: 2010-2011, Stefano Rivera <stefanor@ubuntu.com>
-License: ISC
- Permission to use, copy, modify, and/or distribute this software for any
- purpose with or without fee is hereby granted, provided that the above
- copyright notice and this permission notice appear in all copies.
- .
- THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
- OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- PERFORMANCE OF THIS SOFTWARE.

test-data/blank-example/debian/rules

@@ -1,4 +0,0 @@
-#!/usr/bin/make -f
-
-%:
-	dh $@

test-data/blank-example/debian/source/format

@@ -1 +0,0 @@
-3.0 (quilt)

test-data/blank-example/debian/source/local-options

@@ -1 +0,0 @@
-abort-on-upstream-changes

test-data/blank-example/debian/source/options

@@ -1 +0,0 @@
-compression=xz

test-requirements.txt

@@ -0,0 +1,4 @@
+coverage
+flake8 >= 3.8.0
+pytest
+pytest-cov

tests/test_command.py

@@ -1,111 +0,0 @@
-#!/usr/bin/python3
-# -*- coding: utf-8 -*-
-
-# Copyright (C) 2018  Canonical Ltd.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-import sys
-import unittest
-
-from ubuntu_archive_assistant.command import AssistantCommand
-
-# class AssistantCommand():
-#    def print_usage(self):
-#    def _add_subparser_from_class(self, name, commandclass):
-#    def _import_subcommands(self, submodules):
-
-scratch = 0
-
-
-class MyMainCommand(AssistantCommand):
-
-    def __init__(self):
-        super().__init__(command_id="test", description="test", leaf=False)
-
-
-class MySubCommand(AssistantCommand):
-
-    def __init__(self):
-        super().__init__(command_id="subtest", description="subtest", leaf=False)
-
-    def update(self, args):
-        super().update(args)
-        self._args.append("extra")
-
-
-def do_nothing():
-    return
-
-
-def do_something():
-    global scratch
-    scratch = 1337
-
-
-def do_crash():
-    raise Exception("unexpected")
-
-
-class TestCommand(unittest.TestCase):
-
-    def test_update_args(self):
-        main = MyMainCommand()
-        sub = MySubCommand()
-        sub._args = ['toto', 'tata']
-        main.commandclass = sub
-        main.func = do_nothing
-        self.assertNotIn('titi', sub._args)
-        main.update(['titi', 'tutu'])
-        main.run_command()
-        self.assertIn('titi', main._args)
-        self.assertIn('titi', sub._args)
-
-    def test_parse_args(self):
-        main = MyMainCommand()
-        main._args = [ '--debug', 'help' ]
-        main.subcommand = do_nothing
-        main.parse_args()
-        self.assertNotIn('help', main._args)
-        self.assertNotIn('--debug', main._args)
-        self.assertTrue(main.debug)
-
-    def test_run_command_with_commandclass(self):
-        main = MyMainCommand()
-        sub = MySubCommand()
-        main._args = ['unknown_arg']
-        main.commandclass = sub
-        main.func = do_nothing
-        self.assertEqual(None, sub._args)
-        main.run_command()
-        self.assertIn('extra', sub._args)
-
-    def test_run_command(self):
-        main = MyMainCommand()
-        sub = MySubCommand()
-        main.func = do_something
-        self.assertEqual(None, sub._args)
-        main.run_command()
-        self.assertEqual(1337, scratch)
-
-
-    def test_run_command_crashing(self):
-        main = MyMainCommand()
-        sub = MySubCommand()
-        main.func = do_crash
-        try:
-            main.run_command()
-            self.fail("Did not crash as expected")
-        except Exception as e:
-            self.assertIn('unexpected', e.args)
-

tox.ini

@@ -0,0 +1,22 @@
+[tox]
+envlist = flake8,pytest
+skipsdist = True
+
+[testenv]
+base_python = python3
+setenv = VIRTUAL_ENV={envdir}
+         PYTHONHASHSEED=0
+usedevelop = True
+deps = -r{toxinidir}/requirements.txt
+       -r{toxinidir}/test-requirements.txt
+install_command = pip install {opts} {packages}
+
+[testenv:flake8]
+commands = flake8 {posargs}
+
+[testenv:pytest]
+commands = pytest -v --cov=ubuntutools {posargs:ubuntutools}
+
+[flake8]
+verbose = 2
+max-line-length = 99

ubuntu-archive-assistant

@@ -1,28 +0,0 @@
-#!/usr/bin/python3
-# -*- coding: utf-8 -*-
-
-# Copyright (C) 2018  Canonical Ltd.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 3 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-import signal
-import sys
-from ubuntu_archive_assistant.core import Assistant
-
-assistant = Assistant()
-
-def signal_handler(signal, frame):
-        sys.exit(0)
-
-signal.signal(signal.SIGINT, signal_handler)
-assistant.main()

ubuntu-build

@@ -2,16 +2,16 @@
 #
 #   ubuntu-build - command line interface for Launchpad buildd operations.
 #
-#   Copyright (C) 2007 Canonical Ltd.
+#   Copyright (C) 2007-2024 Canonical Ltd.
 #   Authors:
 #    - Martin Pitt <martin.pitt@canonical.com>
 #    - Jonathan Davies <jpds@ubuntu.com>
 #    - Michael Bienia <geser@ubuntu.com>
+#    - Steve Langasek <steve.langasek@canonical.com>
 #
 #   This program is free software: you can redistribute it and/or modify
 #   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation, either version 3 of the License, or
-#   (at your option) any later version.
+#   the Free Software Foundation, version 3 of the License.
 #
 #   This program is distributed in the hope that it will be useful,
 #   but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -22,101 +22,181 @@
 #   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 
-# Our modules to import.
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+import argparse
 import sys
-from optparse import OptionGroup
-from optparse import OptionParser
-from ubuntutools.lp.udtexceptions import (SeriesNotFoundException,
-                                          PackageNotFoundException,
-                                          PocketDoesNotExistError,)
-from ubuntutools.lp.lpapicache import Distribution, PersonTeam
+
+import lazr.restfulclient.errors
+from launchpadlib.launchpad import Launchpad
+
+from ubuntutools import getLogger
+from ubuntutools.lp.udtexceptions import PocketDoesNotExistError
 from ubuntutools.misc import split_release_pocket
 
+Logger = getLogger()
+
+
+def get_build_states(pkg, archs):
+    res = []
+
+    for build in pkg.getBuilds():
+        if build.arch_tag in archs:
+            res.append(f"  {build.arch_tag}: {build.buildstate}")
+    msg = "\n".join(res)
+    return f"Build state(s) for '{pkg.source_package_name}':\n{msg}"
+
+
+def rescore_builds(pkg, archs, score):
+    res = []
+
+    for build in pkg.getBuilds():
+        arch = build.arch_tag
+        if arch in archs:
+            if not build.can_be_rescored:
+                continue
+            try:
+                build.rescore(score=score)
+                res.append(f"  {arch}: done")
+            except lazr.restfulclient.errors.Unauthorized:
+                Logger.error(
+                    "You don't have the permissions to rescore builds."
+                    " Ignoring your rescore request."
+                )
+                return None
+            except lazr.restfulclient.errors.BadRequest:
+                Logger.info("Cannot rescore build of %s on %s.", build.source_package_name, arch)
+                res.append(f"  {arch}: failed")
+
+    msg = "\n".join(res)
+    return f"Rescoring builds of '{pkg.source_package_name}' to {score}:\n{msg}"
+
+
+def retry_builds(pkg, archs):
+    res = []
+    for build in pkg.getBuilds():
+        arch = build.arch_tag
+        if arch in archs:
+            try:
+                build.retry()
+                res.append(f"  {arch}: done")
+            except lazr.restfulclient.errors.BadRequest:
+                res.append(f"  {arch}: failed")
+    msg = "\n".join(res)
+    return f"Retrying builds of '{pkg.source_package_name}':\n{msg}"
+
 
 def main():
     # Usage.
-    usage = "%prog <srcpackage> <release> <operation>\n\n"
+    usage = "%(prog)s <srcpackage> <release> <operation>\n\n"
     usage += "Where operation may be one of: rescore, retry, or status.\n"
     usage += "Only Launchpad Buildd Admins may rescore package builds."
 
     # Valid architectures.
-    valid_archs = set(["armel", "armhf", "arm64", "amd64", "hppa", "i386", "ia64",
-                       "lpia", "powerpc", "ppc64el", "s390x", "sparc"])
+    valid_archs = set(
+        ["armhf", "arm64", "amd64", "i386", "powerpc", "ppc64el", "riscv64", "s390x"]
+    )
 
     # Prepare our option parser.
-    opt_parser = OptionParser(usage)
+    parser = argparse.ArgumentParser(usage=usage)
 
-    # Retry options
-    retry_rescore_options = OptionGroup(opt_parser, "Retry and rescore options",
-                                        "These options may only be used with "
-                                        "the 'retry' and 'rescore' operations.")
-    retry_rescore_options.add_option("-a", "--arch", type="string",
-                                     action="append", dest="architecture",
-                                     help="Rebuild or rescore a specific "
-                                          "architecture. Valid architectures "
-                                          "include: %s." %
-                                          ", ".join(valid_archs))
+    parser.add_argument(
+        "-a",
+        "--arch",
+        action="append",
+        dest="architecture",
+        help=f"Rebuild or rescore a specific architecture. Valid architectures "
+        f"include: {', '.join(valid_archs)}.",
+    )
+
+    parser.add_argument("-A", "--archive", help="operate on ARCHIVE", default="ubuntu")
 
     # Batch processing options
-    batch_options = OptionGroup(opt_parser, "Batch processing",
-                                "These options and parameter ordering is only "
-                                "available in --batch mode.\nUsage: "
-                                "ubuntu-build --batch [options] <package>...")
-    batch_options.add_option('--batch',
-                             action='store_true', dest='batch', default=False,
-                             help='Enable batch mode')
-    batch_options.add_option('--series',
-                             action='store', dest='series', type='string',
-                             help='Selects the Ubuntu series to operate on '
-                                  '(default: current development series)')
-    batch_options.add_option('--retry',
-                             action='store_true', dest='retry', default=False,
-                             help='Retry builds (give-back).')
-    batch_options.add_option('--rescore',
-                             action='store', dest='priority', type='int',
-                             help='Rescore builds to <priority>.')
-    batch_options.add_option('--arch2', action='append', dest='architecture',
-                             type='string',
-                             help="Affect only 'architecture' (can be used "
-                                  "several times). Valid architectures are: %s."
-                                  % ', '.join(valid_archs))
+    batch_options = parser.add_argument_group(
+        "Batch processing",
+        "These options and parameter ordering is only "
+        "available in --batch mode.\nUsage: "
+        "ubuntu-build --batch [options] <package>...",
+    )
+    batch_options.add_argument(
+        "--batch", action="store_true", dest="batch", help="Enable batch mode"
+    )
+    batch_options.add_argument(
+        "--series",
+        action="store",
+        dest="series",
+        help="Selects the Ubuntu series to operate on (default: current development series)",
+    )
+    batch_options.add_argument(
+        "--retry", action="store_true", dest="retry", help="Retry builds (give-back)."
+    )
+    batch_options.add_argument(
+        "--rescore",
+        action="store",
+        dest="priority",
+        type=int,
+        help="Rescore builds to <priority>.",
+    )
+    batch_options.add_argument(
+        "--state",
+        action="store",
+        dest="state",
+        help="Act on builds that are in the specified state",
+    )
 
-    # Add the retry options to the main group.
-    opt_parser.add_option_group(retry_rescore_options)
-    # Add the batch mode to the main group.
-    opt_parser.add_option_group(batch_options)
+    parser.add_argument("packages", metavar="package", nargs="*", help=argparse.SUPPRESS)
 
     # Parse our options.
-    (options, args) = opt_parser.parse_args()
+    args = parser.parse_args()
 
-    if not len(args):
-        opt_parser.print_help()
-        sys.exit(1)
+    launchpad = Launchpad.login_with("ubuntu-dev-tools", "production", version="devel")
+    ubuntu = launchpad.distributions["ubuntu"]
 
-    if not options.batch:
+    if args.batch:
+        release = args.series
+        if not release:
+            # ppas don't have a proposed pocket so just use the release pocket;
+            # but for the main archive we default to -proposed
+            release = ubuntu.getDevelopmentSeries()[0].name
+            if args.archive == "ubuntu":
+                release = f"{release}-proposed"
+        try:
+            (release, pocket) = split_release_pocket(release)
+        except PocketDoesNotExistError as error:
+            Logger.error(error)
+            sys.exit(1)
+    else:
         # Check we have the correct number of arguments.
-        if len(args) < 3:
-            opt_parser.error("Incorrect number of arguments.")
+        if len(args.packages) < 3:
+            parser.error("Incorrect number of arguments.")
 
         try:
-            package = str(args[0]).lower()
-            release = str(args[1]).lower()
-            op = str(args[2]).lower()
+            package = str(args.packages[0]).lower()
+            release = str(args.packages[1]).lower()
+            operation = str(args.packages[2]).lower()
         except IndexError:
-            opt_parser.print_help()
+            parser.print_help()
             sys.exit(1)
 
+    archive = launchpad.archives.getByReference(reference=args.archive)
+    try:
+        distroseries = ubuntu.getSeries(name_or_version=release)
+    except lazr.restfulclient.errors.NotFound as error:
+        Logger.error(error)
+        sys.exit(1)
+
+    if not args.batch:
         # Check our operation.
-        if op not in ("rescore", "retry", "status"):
-            print("Invalid operation: %s." % op, file=sys.stderr)
+        if operation not in ("rescore", "retry", "status"):
+            Logger.error("Invalid operation: %s.", operation)
             sys.exit(1)
 
         # If the user has specified an architecture to build, we only wish to
         # rebuild it and nothing else.
-        if options.architecture:
-            if options.architecture[0] not in valid_archs:
-                print("Invalid architecture specified: %s."
-                      % options.architecture[0], file=sys.stderr)
+        if args.architecture:
+            if args.architecture[0] not in valid_archs:
+                Logger.error("Invalid architecture specified: %s.", args.architecture[0])
                 sys.exit(1)
             else:
                 one_arch = True
@@ -127,152 +207,242 @@ def main():
         try:
             (release, pocket) = split_release_pocket(release)
         except PocketDoesNotExistError as error:
-            print('E: %s' % error)
+            Logger.error(error)
             sys.exit(1)
 
-        # Get the ubuntu archive
-        try:
-            ubuntu_archive = Distribution('ubuntu').getArchive()
-        # Will fail here if we have no credentials, bail out
-        except IOError:
-            sys.exit(1)
         # Get list of published sources for package in question.
         try:
-            sources = ubuntu_archive.getSourcePackage(package, release, pocket)
-            distroseries = Distribution('ubuntu').getSeries(release)
-        except (SeriesNotFoundException, PackageNotFoundException) as error:
-            print(error)
+            sources = archive.getPublishedSources(
+                distro_series=distroseries,
+                exact_match=True,
+                pocket=pocket,
+                source_name=package,
+                status="Published",
+            )[0]
+        except IndexError:
+            Logger.error("No publication found for package %s", package)
             sys.exit(1)
         # Get list of builds for that package.
         builds = sources.getBuilds()
 
         # Find out the version and component in given release.
-        version = sources.getVersion()
-        component = sources.getComponent()
+        version = sources.source_package_version
+        component = sources.component_name
 
         # Operations that are remaining may only be done by Ubuntu developers
         # (retry) or buildd admins (rescore). Check if the proper permissions
         # are in place.
-        me = PersonTeam.me
-        if op == "rescore":
-            necessary_privs = me.isLpTeamMember('launchpad-buildd-admins')
-        if op == "retry":
-            necessary_privs = me.canUploadPackage(ubuntu_archive, distroseries,
-                                                  sources.getPackageName(),
-                                                  sources.getComponent(),
-                                                  pocket=pocket)
-
-        if op in ('rescore', 'retry') and not necessary_privs:
-            print(("You cannot perform the %s operation on a %s package as "
-                   "you do not have the permissions to do this action.")
-                  % (op, component), file=sys.stderr)
-            sys.exit(1)
+        if operation == "retry":
+            necessary_privs = archive.checkUpload(
+                component=sources.getComponent(),
+                distroseries=distroseries,
+                person=launchpad.me,
+                pocket=pocket,
+                sourcepackagename=sources.getPackageName(),
+            )
+            if not necessary_privs:
+                Logger.error(
+                    "You cannot perform the %s operation on a %s package as you"
+                    " do not have the permissions to do this action.",
+                    operation,
+                    component,
+                )
+                sys.exit(1)
 
         # Output details.
-        print("The source version for '%s' in %s (%s) is at %s."
-              % (package, release.capitalize(), component, version))
+        Logger.info(
+            "The source version for '%s' in %s (%s) is at %s.",
+            package,
+            release.capitalize(),
+            component,
+            version,
+        )
 
-        print("Current build status for this package:")
+        Logger.info("Current build status for this package:")
 
         # Output list of arches for package and their status.
         done = False
         for build in builds:
-            if one_arch and build.arch_tag != options.architecture[0]:
+            if one_arch and build.arch_tag != args.architecture[0]:
                 # Skip this architecture.
                 continue
 
             done = True
-            print("%s: %s." % (build.arch_tag, build.buildstate))
-            if op == 'rescore':
+            Logger.info("%s: %s.", build.arch_tag, build.buildstate)
+            if operation == "rescore":
                 if build.can_be_rescored:
                     # FIXME: make priority an option
                     priority = 5000
-                    print('Rescoring build %s to %d...'
-                          % (build.arch_tag, priority))
-                    build.rescore(score=priority)
+                    Logger.info("Rescoring build %s to %d...", build.arch_tag, priority)
+                    try:
+                        build.rescore(score=priority)
+                    except lazr.restfulclient.errors.Unauthorized:
+                        Logger.error(
+                            "You don't have the permissions to rescore builds."
+                            " Ignoring your rescore request."
+                        )
+                        break
                 else:
-                    print('Cannot rescore build on %s.' % build.arch_tag)
-            if op == 'retry':
+                    Logger.info("Cannot rescore build on %s.", build.arch_tag)
+            if operation == "retry":
                 if build.can_be_retried:
-                    print('Retrying build on %s...' % build.arch_tag)
+                    Logger.info("Retrying build on %s...", build.arch_tag)
                     build.retry()
                 else:
-                    print('Cannot retry build on %s.' % build.arch_tag)
+                    Logger.info("Cannot retry build on %s.", build.arch_tag)
 
         # We are done
         if done:
             sys.exit(0)
 
-        print(("No builds for '%s' found in the %s release - it may have been "
-               "built in a former release.") % (package, release.capitalize()))
+        Logger.info("No builds for '%s' found in the %s release", package, release.capitalize())
+        Logger.info("It may have been built in a former release.")
         sys.exit(0)
 
     # Batch mode
 
-    if not options.architecture:
+    if not args.architecture:
         # no specific architectures specified, assume all valid ones
         archs = valid_archs
     else:
-        archs = set(options.architecture)
+        archs = set(args.architecture)
 
     # filter out duplicate and invalid architectures
     archs.intersection_update(valid_archs)
 
-    release = options.series
-    if not release:
-        release = (Distribution('ubuntu').getDevelopmentSeries().name
-                   + '-proposed')
-    try:
-        (release, pocket) = split_release_pocket(release)
-    except PocketDoesNotExistError as error:
-        print('E: %s' % error)
-        sys.exit(1)
+    if not args.packages:
+        retry_count = 0
+        can_rescore = True
 
-    ubuntu_archive = Distribution('ubuntu').getArchive()
-    try:
-        distroseries = Distribution('ubuntu').getSeries(release)
-    except SeriesNotFoundException as error:
-        print(error)
-        sys.exit(1)
-    me = PersonTeam.me
+        if not args.state:
+            if args.retry:
+                args.state = "Failed to build"
+            elif args.priority:
+                args.state = "Needs building"
+        # there is no equivalent to series.getBuildRecords() for a ppa.
+        # however, we don't want to have to traverse all build records for
+        # all series when working on the main archive, so we use
+        # series.getBuildRecords() for ubuntu and handle ppas separately
+        series = ubuntu.getSeries(name_or_version=release)
+        if args.archive == "ubuntu":
+            builds = series.getBuildRecords(build_state=args.state, pocket=pocket)
+        else:
+            builds = []
+            for build in archive.getBuildRecords(build_state=args.state, pocket=pocket):
+                if not build.current_source_publication:
+                    continue
+                if build.current_source_publication.distro_series == series:
+                    builds.append(build)
+        for build in builds:
+            if build.arch_tag not in archs:
+                continue
+            if not build.current_source_publication:
+                continue
+            # fixme: refactor
+            # Check permissions (part 2): check upload permissions for the
+            # source package
+            can_retry = args.retry and archive.checkUpload(
+                component=build.current_source_publication.component_name,
+                distroseries=series,
+                person=launchpad.me,
+                pocket=pocket,
+                sourcepackagename=build.source_package_name,
+            )
+            if args.retry and not can_retry:
+                Logger.error(
+                    "You don't have the permissions to retry the build of '%s', skipping.",
+                    build.source_package_name,
+                )
+                continue
+            Logger.info(
+                "The source version for '%s' in '%s' (%s) is: %s",
+                build.source_package_name,
+                release,
+                pocket,
+                build.source_package_version,
+            )
 
-    # Check permisions (part 1): Rescoring can only be done by buildd admins
-    can_rescore = ((options.priority
-                    and me.isLpTeamMember('launchpad-buildd-admins'))
-                   or False)
-    if options.priority and not can_rescore:
-        print("You don't have the permissions to rescore builds. "
-              "Ignoring your rescore request.", file=sys.stderr)
+            if args.retry and build.can_be_retried:
+                Logger.info(
+                    "Retrying build of %s on %s...", build.source_package_name, build.arch_tag
+                )
+                try:
+                    build.retry()
+                    retry_count += 1
+                except lazr.restfulclient.errors.BadRequest:
+                    Logger.info(
+                        "Failed to retry build of %s on %s",
+                        build.source_package_name,
+                        build.arch_tag,
+                    )
 
-    for pkg in args:
+            if args.priority and can_rescore:
+                if build.can_be_rescored:
+                    try:
+                        build.rescore(score=args.priority)
+                    except lazr.restfulclient.errors.Unauthorized:
+                        Logger.error(
+                            "You don't have the permissions to rescore builds."
+                            " Ignoring your rescore request."
+                        )
+                        can_rescore = False
+                    except lazr.restfulclient.errors.BadRequest:
+                        Logger.info(
+                            "Cannot rescore build of %s on %s.",
+                            build.source_package_name,
+                            build.arch_tag,
+                        )
+
+            Logger.info("")
+        if args.retry:
+            Logger.info("%d package builds retried", retry_count)
+        sys.exit(0)
+
+    for pkg in args.packages:
         try:
-            pkg = ubuntu_archive.getSourcePackage(pkg, release, pocket)
-        except PackageNotFoundException as error:
-            print(error)
+            pkg = archive.getPublishedSources(
+                distro_series=distroseries,
+                exact_match=True,
+                pocket=pocket,
+                source_name=pkg,
+                status="Published",
+            )[0]
+        except IndexError:
+            Logger.error("No publication found for package %s", pkg)
             continue
 
         # Check permissions (part 2): check upload permissions for the source
         # package
-        can_retry = options.retry and me.canUploadPackage(ubuntu_archive,
-                                                          distroseries,
-                                                          pkg.getPackageName(),
-                                                          pkg.getComponent())
-        if options.retry and not can_retry:
-            print(("You don't have the permissions to retry the build of "
-                   "'%s'. Ignoring your request.")
-                  % pkg.getPackageName(), file=sys.stderr)
+        can_retry = args.retry and archive.checkUpload(
+            component=pkg.component_name,
+            distroseries=distroseries,
+            person=launchpad.me,
+            pocket=pocket,
+            sourcepackagename=pkg.source_package_name,
+        )
+        if args.retry and not can_retry:
+            Logger.error(
+                "You don't have the permissions to retry the "
+                "build of '%s'. Ignoring your request.",
+                pkg.source_package_name,
+            )
 
-        print("The source version for '%s' in '%s' (%s) is: %s"
-              % (pkg.getPackageName(), release, pocket, pkg.getVersion()))
+        Logger.info(
+            "The source version for '%s' in '%s' (%s) is: %s",
+            pkg.source_package_name,
+            release,
+            pocket,
+            pkg.source_package_version,
+        )
 
-        print(pkg.getBuildStates(archs))
+        Logger.info(get_build_states(pkg, archs))
         if can_retry:
-            print(pkg.retryBuilds(archs))
-        if options.priority and can_rescore:
-            print(pkg.rescoreBuilds(archs, options.priority))
+            Logger.info(retry_builds(pkg, archs))
+        if args.priority:
+            Logger.info(rescore_builds(pkg, archs, args.priority))
 
-        print()
+        Logger.info("")
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

ubuntu-iso

@@ -20,51 +20,57 @@
 #
 # ##################################################################
 
-import optparse
+# pylint: disable=invalid-name
+# pylint: enable=invalid-name
+
+import argparse
 import subprocess
 import sys
 
+from ubuntutools import getLogger
+
+Logger = getLogger()
+
 
 def extract(iso, path):
-    command = ['isoinfo', '-R', '-i', iso, '-x', path]
-    pipe = subprocess.Popen(command, stdout=subprocess.PIPE,
-                            stderr=subprocess.PIPE, encoding='utf-8')
-    stdout, stderr = pipe.communicate()
+    command = ["isoinfo", "-R", "-i", iso, "-x", path]
+    pipe = subprocess.run(
+        command, check=False, encoding="utf-8", stdout=subprocess.PIPE, stderr=subprocess.PIPE
+    )
 
     if pipe.returncode != 0:
-        sys.stderr.write(stderr)
+        sys.stderr.write(pipe.stderr)
         sys.exit(pipe.returncode)
 
-    return stdout
+    return pipe.stdout
 
 
 def main():
-    desc = 'Given an ISO, %prog will display the Ubuntu version information'
-    parser = optparse.OptionParser(usage='%prog [options] iso...',
-                                   description=desc)
-    isos = parser.parse_args()[1]
+    desc = "Given an ISO, %(prog)s will display the Ubuntu version information"
+    parser = argparse.ArgumentParser(usage="%(prog)s [options] iso...", description=desc)
+    parser.add_argument("isos", nargs="*", help=argparse.SUPPRESS)
+    args = parser.parse_args()
     err = False
 
-    for iso in isos:
-        if len(isos) > 1:
-            prefix = '%s:' % iso
+    for iso in args.isos:
+        if len(args.isos) > 1:
+            prefix = f"{iso}:"
         else:
-            prefix = ''
+            prefix = ""
 
-        version = extract(iso, '/.disk/info')
+        version = extract(iso, "/.disk/info")
 
         if len(version) == 0:
-            print('%s does not appear to be an Ubuntu ISO' % iso,
-                  file=sys.stderr)
+            Logger.error("%s does not appear to be an Ubuntu ISO", iso)
             err = True
             continue
 
-        print(prefix + version)
+        Logger.info(prefix + version)
 
     if err:
         sys.exit(1)
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()
     sys.exit(0)